docs: Note the release of v0.12.0

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>

.github/FUNDING.yml

@@ -0,0 +1,2 @@
+ko_fi: koconnor
+custom: https://www.klipper3d.org/Sponsors.html#klipper-developers

.github/ISSUE_TEMPLATE/config.yml

@@ -0,0 +1,11 @@
+blank_issues_enabled: false
+contact_links:
+  - name: Contact Directions
+    url: https://www.klipper3d.org/Contact.html
+    about: Have a question? Need help? Start here.
+  - name: Klipper Forum
+    url: https://community.klipper3d.org/
+    about: Klipper community Discourse server.
+  - name: Klipper Chat
+    url: https://discord.klipper3d.org/
+    about: Klipper community Discord chat server.

.github/workflows/build-test.yaml

@@ -0,0 +1,27 @@
+# Perform continuous integration tests on updates and pull requests
+name: Build test
+on: [push, pull_request]
+
+jobs:
+  build:
+    runs-on: ubuntu-20.04
+    steps:
+    - uses: actions/checkout@v3
+
+    - name: Setup cache
+      uses: actions/cache@v3
+      with:
+        path: ci_cache
+        key: ${{ runner.os }}-build-${{ hashFiles('scripts/ci-install.sh') }}
+
+    - name: Prepare tests
+      run: ./scripts/ci-install.sh
+
+    - name: Test
+      run: ./scripts/ci-build.sh 2>&1
+
+    - name: Upload micro-controller data dictionaries
+      uses: actions/upload-artifact@v3
+      with:
+        name: data-dict
+        path: ci_build/dict

.github/workflows/invalid-label-bot.yaml

@@ -0,0 +1,43 @@
+# Add a comment to github issues marked with the "not on github" label
+name: "Add comment to issues marked 'not on github'"
+on:
+  issues:
+      types: [labeled]
+jobs:
+  comment:
+    if: github.repository == 'Klipper3d/klipper'
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/github-script@v6
+        with:
+          script: |
+            if (context.payload.label.name != "not on github")
+              return;
+            msg = "It looks like this ticket is a request for help"
+                + " (or similar)."
+                + " Many helpful people will not see your message here and you"
+                + " are unlikely to get a useful response."
+                + " Instead, see the contact directions at:"
+                + " https://www.klipper3d.org/Contact.html"
+                + "\n\n"
+                + "We use github to share the results of work done to"
+                + " improve Klipper. We don't use github for requests."
+                + " (In particular, we don't use github for feature"
+                + " requests, to answer questions, nor to help diagnose"
+                + " problems with a printer.)"
+                + "\n\n"
+                + "Please follow the directions at:"
+                + " https://www.klipper3d.org/Contact.html"
+                + "\n\n"
+                + "This ticket will be automatically closed."
+                + "\n\n"
+                + "Best regards,\n"
+                + "~ Your friendly GitIssueBot"
+                + "\n\n"
+                + "PS: I'm just an automated script, not a human being.";
+            github.rest.issues.createComment({
+              issue_number: context.issue.number,
+              owner: context.repo.owner,
+              repo: context.repo.repo,
+              body: msg
+            })

.github/workflows/klipper3d-deploy.yaml

@@ -0,0 +1,34 @@
+name: klipper3d deploy
+on:
+  schedule:
+    - cron: "0 0 * * *"
+  push:
+    branches:
+      - master
+    paths:
+      - docs/**
+      - .github/workflows/klipper3d-deploy.yaml
+jobs:
+  deploy:
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@v3
+      - name: Setup python
+        uses: actions/setup-python@v4
+        with:
+          python-version: '3.8'
+      - uses: actions/cache@v3
+        with:
+          path: ~/.cache/pip
+          key: ${{ runner.os }}-pip-${{ hashFiles('docs/_klipper3d/mkdocs-requirements.txt') }}
+          restore-keys: |
+            ${{ runner.os }}-pip-
+      - name: Install dependencies
+        run: pip install -r docs/_klipper3d/mkdocs-requirements.txt
+      - name: Build MkDocs Pages
+        run: docs/_klipper3d/build-translations.sh
+      - name: Deploy
+        uses: JamesIves/github-pages-deploy-action@v4.4.3
+        with:
+          branch: gh-pages # The branch the action should deploy to.
+          folder: site # The folder the action should deploy.

.github/workflows/reviewer-needed-label.yaml

@@ -0,0 +1,66 @@
+# Add a comment to github PRs marked with the "reviewer needed" label
+name: "Add comment to PRs marked 'reviewer needed'"
+on:
+  pull_request_target:
+      types: [labeled]
+jobs:
+  add_comment:
+    if: github.repository == 'Klipper3d/klipper'
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/github-script@v6
+        with:
+          script: |
+            if (context.payload.label.name != "reviewer needed")
+              return;
+            if (context.payload.pull_request.assignees.length > 0)
+              return;
+            msg = "Thank you for your contribution to Klipper."
+                + " Unfortunately, a reviewer has not assigned themselves to"
+                + " this GitHub Pull Request. All Pull Requests are reviewed"
+                + " before merging, and a reviewer will need to volunteer."
+                + " Further information is available at:"
+                + " https://www.klipper3d.org/CONTRIBUTING.html"
+                + "\n\n"
+                + "There are some steps that you can take now:"
+                + "\n"
+                + "1. Perform a self-review of your Pull Request by following"
+                + " the steps at:"
+                + " https://www.klipper3d.org/CONTRIBUTING.html#what-to-expect-in-a-review"
+                + "\n"
+                + "  If you have completed a self-review, be sure to state the"
+                + " results of that self-review explicitly in the Pull Request"
+                + " comments. A reviewer is more likely to participate if the"
+                + " bulk of a review has already been completed."
+                + "\n"
+                + "2. Consider opening a topic on the [Klipper Discourse]"
+                + "(https://www.klipper3d.org/Contact.html#discourse-forum)"
+                + " server to discuss this work. The Discourse server is a good"
+                + " place to discuss development ideas and to engage users"
+                + " interested in testing. Reviewers are more likely to"
+                + " prioritize Pull Requests with an active community of users."
+                + "\n"
+                + "3. Consider helping out reviewers by reviewing other Klipper"
+                + " Pull Requests. Taking the time to perform a careful and"
+                + " detailed review of others work is appreciated. Regular"
+                + " contributors are more likely to prioritize the"
+                + " contributions of other regular contributors."
+                + "\n\n"
+                + "Unfortunately, if a reviewer does not assign themselves to"
+                + " this GitHub Pull Request then it will be automatically"
+                + " closed. If this happens, then it is a good idea to move"
+                + " further discussion to the [Klipper Discourse]"
+                + "(https://www.klipper3d.org/Contact.html#discourse-forum)"
+                + " server. Reviewers can reach out on that forum to let you"
+                + " know if they are interested and when they are available."
+                + "\n\n"
+                + "Best regards,\n"
+                + "~ Your friendly GitIssueBot"
+                + "\n\n"
+                + "PS: I'm just an automated script, not a human being.";
+            github.rest.issues.createComment({
+              issue_number: context.issue.number,
+              owner: context.repo.owner,
+              repo: context.repo.repo,
+              body: msg
+            })

.github/workflows/stale-issue-bot.yaml

@@ -0,0 +1,342 @@
+# Close and warn on tickets that have become stale
+name: "Close stale tickets"
+on:
+  schedule:
+    - cron: '0 */12 * * *'
+jobs:
+  # Check for stale issues (no updates in 5 weeks)
+  stale:
+    if: github.repository == 'Klipper3d/klipper'
+    runs-on: ubuntu-latest
+    steps:
+    - uses: actions/stale@v8
+      with:
+        repo-token: ${{ secrets.GITHUB_TOKEN }}
+        stale-issue-message: |
+          Hello,
+
+          It looks like there hasn't been any recent updates on this
+          Klipper github issue.  If you created this issue and no
+          longer consider it open, then please login to github and
+          close the issue.  Otherwise, if there is no further activity
+          on this thread then it will be automatically closed in a few
+          days.
+
+          Best regards,
+
+          ~ Your friendly GitIssueBot
+
+          PS: I'm just an automated script, not a human being.
+
+        exempt-issue-labels: 'enhancement,bug'
+        days-before-stale: 35
+        days-before-close: 7
+        days-before-pr-stale: -1
+        days-before-pr-close: -1
+  # Close tickets marked with "not on github" label
+  close_not_on_github:
+    if: github.repository == 'Klipper3d/klipper'
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/github-script@v6
+        with:
+          script: |
+            const expireMillis = 1000 * 60 * 60 * 36;
+            const curtime = new Date().getTime();
+            const issues = await github.rest.issues.listForRepo({
+              owner: context.repo.owner,
+              repo: context.repo.repo,
+              state: 'open',
+              labels: 'not on github',
+              per_page: 100,
+              page: 1
+            });
+            for (const issue of issues.data.values()) {
+              const updatetime = new Date(issue.updated_at).getTime();
+              if (curtime < updatetime + expireMillis)
+                continue;
+              await github.rest.issues.update({
+                owner: context.repo.owner,
+                repo: context.repo.repo,
+                issue_number: issue.number,
+                state: 'closed'
+              });
+            }
+  # Close tickets marked with "reviewer needed" label for 2+ weeks
+  close_reviewer_needed:
+    if: github.repository == 'Klipper3d/klipper'
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/github-script@v6
+        with:
+          script: |
+            const issues = await github.rest.issues.listForRepo({
+              owner: context.repo.owner,
+              repo: context.repo.repo,
+              state: 'open',
+              labels: 'reviewer needed',
+              assignee: 'none',
+              per_page: 100,
+              page: 1
+            });
+            msg = "Unfortunately a reviewer has not assigned themselves to"
+                + " this GitHub Pull Request and it is therefore being"
+                + " closed. It is a good idea to move"
+                + " further discussion to the [Klipper Discourse]"
+                + "(https://www.klipper3d.org/Contact.html#discourse-forum)"
+                + " server. Reviewers can reach out on that forum to let you"
+                + " know if they are interested and when they are available."
+                + "\n\n"
+                + "Best regards,\n"
+                + "~ Your friendly GitIssueBot"
+                + "\n\n"
+                + "PS: I'm just an automated script, not a human being.";
+            const expireMillis = 1000 * 60 * 60 * 24 * 14;
+            const curtime = new Date().getTime();
+            for (const issue of issues.data.values()) {
+              const updatetime = new Date(issue.updated_at).getTime();
+              if (curtime < updatetime + expireMillis)
+                continue;
+              await github.rest.issues.createComment({
+                owner: context.repo.owner,
+                repo: context.repo.repo,
+                issue_number: issue.number,
+                body: msg
+              });
+              await github.rest.issues.update({
+                owner: context.repo.owner,
+                repo: context.repo.repo,
+                issue_number: issue.number,
+                state: 'closed'
+              });
+            }
+  # Mark unassigned PRs that are idle for 2 weeks
+  mark_reviewer_needed:
+    if: github.repository == 'Klipper3d/klipper'
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/github-script@v6
+        with:
+          script: |
+            msg = "Thank you for your contribution to Klipper."
+                + " Unfortunately, a reviewer has not assigned themselves to"
+                + " this GitHub Pull Request. All Pull Requests are reviewed"
+                + " before merging, and a reviewer will need to volunteer."
+                + " Further information is available at:"
+                + " https://www.klipper3d.org/CONTRIBUTING.html"
+                + "\n\n"
+                + "There are some steps that you can take now:"
+                + "\n"
+                + "1. Perform a self-review of your Pull Request by following"
+                + " the steps at:"
+                + " https://www.klipper3d.org/CONTRIBUTING.html#what-to-expect-in-a-review"
+                + "\n"
+                + "  If you have completed a self-review, be sure to state the"
+                + " results of that self-review explicitly in the Pull Request"
+                + " comments. A reviewer is more likely to participate if the"
+                + " bulk of a review has already been completed."
+                + "\n"
+                + "2. Consider opening a topic on the [Klipper Discourse]"
+                + "(https://www.klipper3d.org/Contact.html#discourse-forum)"
+                + " server to discuss this work. The Discourse server is a good"
+                + " place to discuss development ideas and to engage users"
+                + " interested in testing. Reviewers are more likely to"
+                + " prioritize Pull Requests with an active community of users."
+                + "\n"
+                + "3. Consider helping out reviewers by reviewing other Klipper"
+                + " Pull Requests. Taking the time to perform a careful and"
+                + " detailed review of others work is appreciated. Regular"
+                + " contributors are more likely to prioritize the"
+                + " contributions of other regular contributors."
+                + "\n\n"
+                + "Unfortunately, if a reviewer does not assign themselves to"
+                + " this GitHub Pull Request then it will be automatically"
+                + " closed. If this happens, then it is a good idea to move"
+                + " further discussion to the [Klipper Discourse]"
+                + "(https://www.klipper3d.org/Contact.html#discourse-forum)"
+                + " server. Reviewers can reach out on that forum to let you"
+                + " know if they are interested and when they are available."
+                + "\n\n"
+                + "Best regards,\n"
+                + "~ Your friendly GitIssueBot"
+                + "\n\n"
+                + "PS: I'm just an automated script, not a human being.";
+            const create_check = new Date("2022-03-01T00:00:00Z").getTime();
+            const expireMillis = 1000 * 60 * 60 * 24 * 14;
+            const curtime = new Date().getTime();
+            const pulls_req = await github.rest.pulls.list({
+              owner: context.repo.owner,
+              repo: context.repo.repo,
+              per_page: 100,
+              page: 1
+            });
+            for (const pr of pulls_req.data.values()) {
+              const createtime = new Date(pr.created_at).getTime();
+              if (createtime < create_check)
+                continue;
+              const updatetime = new Date(pr.updated_at).getTime();
+              if (curtime < updatetime + expireMillis)
+                continue;
+              if (pr.labels.length > 0)
+                continue;
+              if (pr.assignees.length > 0)
+                continue;
+              await github.rest.issues.createComment({
+                owner: context.repo.owner,
+                repo: context.repo.repo,
+                issue_number: pr.number,
+                body: msg
+              });
+              await github.rest.issues.addLabels({
+                owner: context.repo.owner,
+                repo: context.repo.repo,
+                issue_number: pr.number,
+                labels: ['reviewer needed']
+              });
+            }
+  # Close tickets marked with "resolved" label
+  close_resolved:
+    if: github.repository == 'Klipper3d/klipper'
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/github-script@v6
+        with:
+          script: |
+            msg = "This ticket is being closed because the underlying issue"
+                + " is now thought to be resolved."
+                + "\n\n"
+                + "Best regards,\n"
+                + "~ Your friendly GitIssueBot"
+                + "\n\n"
+                + "PS: I'm just an automated script, not a human being.";
+            const expireMillis = 1000 * 60 * 60 * 24 * 7;
+            const curtime = new Date().getTime();
+            const issues = await github.rest.issues.listForRepo({
+              owner: context.repo.owner,
+              repo: context.repo.repo,
+              state: 'open',
+              labels: 'resolved',
+              per_page: 100,
+              page: 1
+            });
+            for (const issue of issues.data.values()) {
+              const updatetime = new Date(issue.updated_at).getTime();
+              if (curtime < updatetime + expireMillis)
+                continue;
+              await github.rest.issues.createComment({
+                owner: context.repo.owner,
+                repo: context.repo.repo,
+                issue_number: issue.number,
+                body: msg
+              });
+              await github.rest.issues.update({
+                owner: context.repo.owner,
+                repo: context.repo.repo,
+                issue_number: issue.number,
+                state: 'closed'
+              });
+            }
+  # Close PRs marked with "not mainline" label
+  close_not_mainline:
+    if: github.repository == 'Klipper3d/klipper'
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/github-script@v6
+        with:
+          script: |
+            msg = "This PR is being closed because it is currently not"
+                + " considered a good match for the master Klipper"
+                + " repository."
+                + "\n\n"
+                + "Best regards,\n"
+                + "~ Your friendly GitIssueBot"
+                + "\n\n"
+                + "PS: I'm just an automated script, not a human being.";
+            const expireMillis = 1000 * 60 * 60 * 24 * 7;
+            const curtime = new Date().getTime();
+            const issues = await github.rest.issues.listForRepo({
+              owner: context.repo.owner,
+              repo: context.repo.repo,
+              state: 'open',
+              labels: 'not mainline',
+              per_page: 100,
+              page: 1
+            });
+            for (const issue of issues.data.values()) {
+              const updatetime = new Date(issue.updated_at).getTime();
+              if (curtime < updatetime + expireMillis)
+                continue;
+              await github.rest.issues.createComment({
+                owner: context.repo.owner,
+                repo: context.repo.repo,
+                issue_number: issue.number,
+                body: msg
+              });
+              await github.rest.issues.update({
+                owner: context.repo.owner,
+                repo: context.repo.repo,
+                issue_number: issue.number,
+                state: 'closed'
+              });
+            }
+  # Mark (and close) PRs with "pending feedback" for 3+ weeks
+  mark_inactive:
+    if: github.repository == 'Klipper3d/klipper'
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/github-script@v6
+        with:
+          script: |
+            msg = "It looks like this GitHub Pull Request has become"
+                + " inactive.  If there are any further updates, you can"
+                + " add a comment here or open a new ticket."
+                + "\n\n"
+                + "Best regards,\n"
+                + "~ Your friendly GitIssueBot"
+                + "\n\n"
+                + "PS: I'm just an automated script, not a human being.";
+            const expireMillis = 1000 * 60 * 60 * 24 * 21;
+            const curtime = new Date().getTime();
+            const issues = await github.rest.issues.listForRepo({
+              owner: context.repo.owner,
+              repo: context.repo.repo,
+              state: 'open',
+              labels: 'pending feedback',
+              per_page: 100,
+              page: 1
+            });
+            for (const issue of issues.data.values()) {
+              const updatetime = new Date(issue.updated_at).getTime();
+              if (curtime < updatetime + expireMillis)
+                continue;
+              await github.rest.issues.addLabels({
+                owner: context.repo.owner,
+                repo: context.repo.repo,
+                issue_number: issue.number,
+                labels: ['inactive']
+              });
+              await github.rest.issues.createComment({
+                owner: context.repo.owner,
+                repo: context.repo.repo,
+                issue_number: issue.number,
+                body: msg
+              });
+              await github.rest.issues.update({
+                owner: context.repo.owner,
+                repo: context.repo.repo,
+                issue_number: issue.number,
+                state: 'closed'
+              });
+            }
+  # Lock closed issues after 6 months of inactivity and PRs after 1 year.
+  lock:
+    name: Lock Closed Issues
+    if: github.repository == 'Klipper3d/klipper'
+    runs-on: ubuntu-latest
+    steps:
+    - uses: dessant/lock-threads@v4
+      with:
+        issue-inactive-days: '180'
+        issue-lock-reason: ''
+        pr-inactive-days: '365'
+        pr-lock-reason: ''

.gitignore

@@ -3,3 +3,4 @@ out
 *.pyc
 .config
 .config.old
+klippy/.version

COPYING

@@ -1,7 +1,7 @@
                     GNU GENERAL PUBLIC LICENSE
                        Version 3, 29 June 2007
 
- Copyright (C) 2007 Free Software Foundation, Inc. <http://fsf.org/>
+ Copyright (C) 2007 Free Software Foundation, Inc. <https://fsf.org/>
  Everyone is permitted to copy and distribute verbatim copies
  of this license document, but changing it is not allowed.
 
@@ -645,7 +645,7 @@ the "copyright" line and a pointer to where the full notice is found.
     GNU General Public License for more details.
 
     You should have received a copy of the GNU General Public License
-    along with this program.  If not, see <http://www.gnu.org/licenses/>.
+    along with this program.  If not, see <https://www.gnu.org/licenses/>.
 
 Also add information on how to contact you by electronic and paper mail.
 
@@ -664,11 +664,11 @@ might be different; for a GUI interface, you would use an "about box".
   You should also get your employer (if you work as a programmer) or school,
 if any, to sign a "copyright disclaimer" for the program, if necessary.
 For more information on this, and how to apply and follow the GNU GPL, see
-<http://www.gnu.org/licenses/>.
+<https://www.gnu.org/licenses/>.
 
   The GNU General Public License does not permit incorporating your program
 into proprietary programs.  If your program is a subroutine library, you
 may consider it more useful to permit linking proprietary applications with
 the library.  If this is what you want to do, use the GNU Lesser General
 Public License instead of this License.  But first, please read
-<http://www.gnu.org/philosophy/why-not-lgpl.html>.
+<https://www.gnu.org/licenses/why-not-lgpl.html>.

Makefile

@@ -1,6 +1,6 @@
 # Klipper build system
 #
-# Copyright (C) 2016  Kevin O'Connor <kevin@koconnor.net>
+# Copyright (C) 2016-2020  Kevin O'Connor <kevin@koconnor.net>
 #
 # This file may be distributed under the terms of the GNU GPLv3 license.
 
@@ -8,9 +8,6 @@
 OUT=out/
 
 # Kconfig includes
-export HOSTCC             := $(CC)
-export CONFIG_SHELL       := sh
-export KCONFIG_AUTOHEADER := autoconf.h
 export KCONFIG_CONFIG     := $(CURDIR)/.config
 -include $(KCONFIG_CONFIG)
 
@@ -22,27 +19,26 @@ OBJCOPY=$(CROSS_PREFIX)objcopy
 OBJDUMP=$(CROSS_PREFIX)objdump
 STRIP=$(CROSS_PREFIX)strip
 CPP=cpp
-PYTHON=python
+PYTHON=python3
 
 # Source files
-src-y=sched.c command.c stepper.c basecmd.c gpiocmds.c spicmds.c endstop.c
-DIRS=src src/avr src/simulator
+src-y =
+dirs-y = src
 
 # Default compiler flags
 cc-option=$(shell if test -z "`$(1) $(2) -S -o /dev/null -xc /dev/null 2>&1`" \
     ; then echo "$(2)"; else echo "$(3)"; fi ;)
 
-CFLAGS-y := -I$(OUT) -Isrc -Os -MD -g \
+CFLAGS := -I$(OUT) -Isrc -I$(OUT)board-generic/ -std=gnu11 -O2 -MD \
     -Wall -Wold-style-definition $(call cc-option,$(CC),-Wtype-limits,) \
-    -ffunction-sections -fdata-sections
-CFLAGS-y += -flto -fwhole-program
+    -ffunction-sections -fdata-sections -fno-delete-null-pointer-checks
+CFLAGS += -flto -fwhole-program -fno-use-linker-plugin -ggdb3
 
-LDFLAGS-y := -Wl,--gc-sections
+OBJS_klipper.elf = $(patsubst %.c, $(OUT)src/%.o,$(src-y))
+OBJS_klipper.elf += $(OUT)compile_time_request.o
+CFLAGS_klipper.elf = $(CFLAGS) -Wl,--gc-sections
 
-CPPFLAGS = -P -MD -MT $@
-
-CFLAGS = $(CFLAGS-y)
-LDFLAGS = $(LDFLAGS-y)
+CPPFLAGS = -I$(OUT) -P -MD -MT $@
 
 # Default targets
 target-y := $(OUT)klipper.elf
@@ -58,58 +54,71 @@ MAKEFLAGS += --no-print-directory
 endif
 
 # Include board specific makefile
+include src/Makefile
 -include src/$(patsubst "%",%,$(CONFIG_BOARD_DIRECTORY))/Makefile
 
-################ Common build rules
-
-$(OUT)%.o: %.c $(OUT)autoconf.h $(OUT)board-link
-	@echo "  Compiling $@"
-	$(Q)$(CC) $(CFLAGS) -c $< -o $@
-
 ################ Main build rules
 
-$(OUT)board-link: $(KCONFIG_CONFIG)
-	@echo "  Creating symbolic link $(OUT)board"
-	$(Q)touch $@
-	$(Q)ln -Tsf $(PWD)/src/$(CONFIG_BOARD_DIRECTORY) $(OUT)board
+$(OUT)%.o: %.c $(OUT)autoconf.h
+	@echo "  Compiling $@"
+	$(Q)$(CC) $(CFLAGS) -c $< -o $@
 
-$(OUT)declfunc.lds: src/declfunc.lds.S
-	@echo "  Precompiling $@"
-	$(Q)$(CPP) $(CPPFLAGS) -D__ASSEMBLY__ $< -o $@
+$(OUT)%.ld: %.lds.S $(OUT)autoconf.h
+	@echo "  Preprocessing $@"
+	$(Q)$(CPP) -I$(OUT) -P -MD -MT $@ $< -o $@
 
-$(OUT)klipper.o: $(patsubst %.c, $(OUT)src/%.o,$(src-y)) $(OUT)declfunc.lds
+$(OUT)klipper.elf: $(OBJS_klipper.elf)
 	@echo "  Linking $@"
-	$(Q)$(CC) $(CFLAGS) -Wl,-r -Wl,-T,$(OUT)declfunc.lds -nostdlib $(patsubst %.c, $(OUT)src/%.o,$(src-y)) -o $@
+	$(Q)$(CC) $(OBJS_klipper.elf) $(CFLAGS_klipper.elf) -o $@
+	$(Q)scripts/check-gcc.sh $@ $(OUT)compile_time_request.o
 
-$(OUT)compile_time_request.o: $(OUT)klipper.o ./scripts/buildcommands.py
+################ Compile time requests
+
+$(OUT)%.o.ctr: $(OUT)%.o
+	$(Q)$(OBJCOPY) -j '.compile_time_request' -O binary $^ $@
+
+$(OUT)compile_time_request.o: $(patsubst %.c, $(OUT)src/%.o.ctr,$(src-y)) ./scripts/buildcommands.py
 	@echo "  Building $@"
-	$(Q)$(OBJCOPY) -j '.compile_time_request' -O binary $< $(OUT)klipper.o.compile_time_request
-	$(Q)$(PYTHON) ./scripts/buildcommands.py $(OUT)klipper.o.compile_time_request $(OUT)autoconf.h $(OUT)compile_time_request.c
+	$(Q)cat $(patsubst %.c, $(OUT)src/%.o.ctr,$(src-y)) | tr -s '\0' '\n' > $(OUT)compile_time_request.txt
+	$(Q)$(PYTHON) ./scripts/buildcommands.py -d $(OUT)klipper.dict -t "$(CC);$(AS);$(LD);$(OBJCOPY);$(OBJDUMP);$(STRIP)" $(OUT)compile_time_request.txt $(OUT)compile_time_request.c
 	$(Q)$(CC) $(CFLAGS) -c $(OUT)compile_time_request.c -o $@
 
-$(OUT)klipper.elf: $(OUT)klipper.o $(OUT)compile_time_request.o
-	@echo "  Linking $@"
-	$(Q)$(CC) $(CFLAGS) $(LDFLAGS) $^ -o $@
+################ Auto generation of "board/" include file link
+
+create-board-link:
+	@echo "  Creating symbolic link $(OUT)board"
+	$(Q)mkdir -p $(addprefix $(OUT), $(dirs-y))
+	$(Q)rm -f $(OUT)*.d $(patsubst %,$(OUT)%/*.d,$(dirs-y))
+	$(Q)rm -f $(OUT)board
+	$(Q)ln -sf $(CURDIR)/src/$(CONFIG_BOARD_DIRECTORY) $(OUT)board
+	$(Q)mkdir -p $(OUT)board-generic
+	$(Q)rm -f $(OUT)board-generic/board
+	$(Q)ln -sf $(CURDIR)/src/generic $(OUT)board-generic/board
+
+# Hack to rebuild OUT directory and reload make dependencies on Kconfig change
+$(OUT)board-link: $(KCONFIG_CONFIG)
+	$(Q)mkdir -p $(OUT)
+	$(Q)echo "# Makefile board-link rule" > $@
+	$(Q)$(MAKE) create-board-link
+include $(OUT)board-link
 
 ################ Kconfig rules
 
-define do-kconfig
-$(Q)mkdir -p $(OUT)/scripts/kconfig/lxdialog
-$(Q)mkdir -p $(OUT)/include/config
-$(Q)mkdir -p $(addprefix $(OUT), $(DIRS))
-$(Q)$(MAKE) -C $(OUT) -f $(CURDIR)/scripts/kconfig/Makefile srctree=$(CURDIR) src=scripts/kconfig obj=scripts/kconfig Q=$(Q) Kconfig=$(CURDIR)/src/Kconfig $1
-endef
+$(OUT)autoconf.h: $(KCONFIG_CONFIG)
+	@echo "  Building $@"
+	$(Q)mkdir -p $(OUT)
+	$(Q) KCONFIG_AUTOHEADER=$@ $(PYTHON) lib/kconfiglib/genconfig.py src/Kconfig
 
-$(OUT)autoconf.h : $(KCONFIG_CONFIG) ; $(call do-kconfig, silentoldconfig)
-$(KCONFIG_CONFIG): src/Kconfig ; $(call do-kconfig, olddefconfig)
-%onfig: ; $(call do-kconfig, $@)
-help: ; $(call do-kconfig, $@)
+$(KCONFIG_CONFIG) olddefconfig: src/Kconfig
+	$(Q)$(PYTHON) lib/kconfiglib/olddefconfig.py src/Kconfig
 
+menuconfig:
+	$(Q)$(PYTHON) lib/kconfiglib/menuconfig.py src/Kconfig
 
 ################ Generic rules
 
 # Make definitions
-.PHONY : all clean distclean FORCE
+.PHONY : all clean distclean olddefconfig menuconfig create-board-link FORCE
 .DELETE_ON_ERROR:
 
 all: $(target-y)
@@ -120,4 +129,4 @@ clean:
 distclean: clean
 	$(Q)rm -f .config .config.old
 
--include $(patsubst %,$(OUT)%/*.d,$(DIRS))
+-include $(OUT)*.d $(patsubst %,$(OUT)%/*.d,$(dirs-y))

README.md

@@ -1,26 +1,18 @@
 Welcome to the Klipper project!
 
-This project implements a 3d-printer firmware. There are two parts to
-this firmware - code that runs on a micro-controller and code that
-runs on a host machine. The host software does the work to build a
-schedule of events, while the micro-controller software does the work
-to execute the provided schedule at the specified times.
+[![Klipper](docs/img/klipper-logo-small.png)](https://www.klipper3d.org/)
 
-Please see the [documentation](docs/Overview.md) for more information
-on running and working with Klipper.
+https://www.klipper3d.org/
 
-License
-=======
+Klipper is a 3d-Printer firmware. It combines the power of a general
+purpose computer with one or more micro-controllers. See the
+[features document](https://www.klipper3d.org/Features.html) for more
+information on why you should use Klipper.
 
-Klipper is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 3 of the License, or
-(at your option) any later version.
+To begin using Klipper start by
+[installing](https://www.klipper3d.org/Installation.html) it.
 
-Klipper is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with Klipper.  If not, see <http://www.gnu.org/licenses/>.
+Klipper is Free Software. See the [license](COPYING) or read the
+[documentation](https://www.klipper3d.org/Overview.html). We depend on
+the generous support from our
+[sponsors](https://www.klipper3d.org/Sponsors.html).

config/avrsim.cfg

@@ -1,83 +0,0 @@
-# Support for internal testing with the "simulavr" program.  To use
-# this config, compile the firmware for an AVR atmega644p, disable the
-# AVR watchdog timer, set the MCU frequency to 20000000, and set the
-# serial baud rate to 115200.
-
-[stepper_x]
-# Pins: PA5, PA4, PA1
-step_pin: ar29
-dir_pin: ar28
-enable_pin: ar25
-step_distance: .0225
-max_velocity: 500
-max_accel: 3000
-endstop_pin: ^!ar0
-position_min: -0.25
-position_endstop: 0
-position_max: 200
-
-[stepper_y]
-# Pins: PA3, PA2
-step_pin: ar27
-dir_pin: ar26
-enable_pin: ar25
-step_distance: .0225
-max_velocity: 500
-max_accel: 3000
-endstop_pin: ^!ar1
-position_min: -0.25
-position_endstop: 0
-position_max: 200
-
-[stepper_z]
-# Pins: PC7, PC6
-step_pin: ar23
-dir_pin: ar22
-enable_pin: ar25
-step_distance: .005
-max_velocity: 250
-max_accel: 30
-endstop_pin: ^!ar2
-position_min: 0.1
-position_endstop: 0.5
-position_max: 200
-
-[stepper_e]
-# Pins: PC3, PC2
-step_pin: ar19
-dir_pin: ar18
-enable_pin: ar25
-step_distance: .004242
-max_velocity: 200000
-max_accel: 3000
-
-[heater_nozzle]
-heater_pin: ar4
-thermistor_pin: analog1
-thermistor_type: EPCOS 100K B57560G104F
-control: pid
-pid_Kp: 22.2
-pid_Ki: 1.08
-pid_Kd: 114
-min_temp: 0
-max_temp: 210
-
-[heater_bed]
-heater_pin: ar3
-thermistor_pin: analog0
-thermistor_type: EPCOS 100K B57560G104F
-control: watermark
-min_temp: 0
-max_temp: 110
-
-[fan]
-pin: ar14
-hard_pwm: 1
-
-[mcu]
-serial: /tmp/pseudoserial
-baud: 115200
-pin_map: arduino
-
-[printer]
-kinematics: cartesian

config/example-cartesian.cfg

@@ -0,0 +1,74 @@
+# This file is an example config file for cartesian style printers.
+# One may copy and edit this file to configure a new cartesian
+# printer.
+
+# DO NOT COPY THIS FILE WITHOUT CAREFULLY READING AND UPDATING IT
+# FIRST. Incorrectly configured parameters may cause damage.
+
+# See docs/Config_Reference.md for a description of parameters.
+
+[stepper_x]
+step_pin: PF0
+dir_pin: PF1
+enable_pin: !PD7
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^PE5
+position_endstop: 0
+position_max: 200
+
+[stepper_y]
+step_pin: PF6
+dir_pin: !PF7
+enable_pin: !PF2
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^PJ1
+position_endstop: 0
+position_max: 200
+
+[stepper_z]
+step_pin: PL3
+dir_pin: PL1
+enable_pin: !PK0
+microsteps: 16
+rotation_distance: 8
+endstop_pin: ^PD3
+position_endstop: 0.5
+position_max: 200
+
+[extruder]
+step_pin: PA4
+dir_pin: PA6
+enable_pin: !PA2
+microsteps: 16
+rotation_distance: 33.500
+nozzle_diameter: 0.500
+filament_diameter: 3.500
+heater_pin: PB4
+sensor_type: EPCOS 100K B57560G104F
+sensor_pin: PK5
+control: pid
+pid_Kp: 22.2
+pid_Ki: 1.08
+pid_Kd: 114
+min_temp: 0
+max_temp: 210
+
+[heater_bed]
+heater_pin: PH5
+sensor_type: EPCOS 100K B57560G104F
+sensor_pin: PK6
+control: watermark
+min_temp: 0
+max_temp: 110
+
+[mcu]
+serial: /dev/ttyACM0
+
+[printer]
+kinematics: cartesian
+max_velocity: 500
+max_accel: 3000
+max_z_velocity: 25
+max_z_accel: 30

config/example-corexy.cfg

@@ -0,0 +1,79 @@
+# This file is an example config file for corexy (and also h-bot)
+# style printers. One may copy and edit this file to configure a new
+# corexy printer.
+
+# DO NOT COPY THIS FILE WITHOUT CAREFULLY READING AND UPDATING IT
+# FIRST. Incorrectly configured parameters may cause damage.
+
+# See docs/Config_Reference.md for a description of parameters.
+
+[stepper_x]
+step_pin: PF0
+dir_pin: PF1
+enable_pin: !PD7
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^PE5
+position_endstop: 0
+position_max: 200
+homing_speed: 50
+
+[stepper_y]
+step_pin: PF6
+dir_pin: PF7
+enable_pin: !PF2
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^PJ1
+position_endstop: 0
+position_max: 200
+homing_speed: 50
+
+[stepper_z]
+step_pin: PL3
+dir_pin: PL1
+enable_pin: !PK0
+microsteps: 16
+rotation_distance: 8
+endstop_pin: ^PD3
+position_endstop: 0.5
+position_max: 200
+
+[extruder]
+step_pin: PA4
+dir_pin: PA6
+enable_pin: !PA2
+microsteps: 16
+rotation_distance: 33.500
+nozzle_diameter: 0.400
+filament_diameter: 1.750
+heater_pin: PB4
+sensor_type: ATC Semitec 104GT-2
+sensor_pin: PK5
+control: pid
+pid_Kp: 22.2
+pid_Ki: 1.08
+pid_Kd: 114
+min_temp: 0
+max_temp: 250
+
+[heater_bed]
+heater_pin: PH5
+sensor_type: EPCOS 100K B57560G104F
+sensor_pin: PK6
+control: watermark
+min_temp: 0
+max_temp: 130
+
+[fan]
+pin: PH6
+
+[mcu]
+serial: /dev/ttyACM0
+
+[printer]
+kinematics: corexy
+max_velocity: 300
+max_accel: 3000
+max_z_velocity: 25
+max_z_accel: 30

config/example-corexz.cfg

@@ -0,0 +1,78 @@
+# This file is an example config file for corexz style printers. One
+# may copy and edit this file to configure a new corexz printer.
+
+# DO NOT COPY THIS FILE WITHOUT CAREFULLY READING AND UPDATING IT
+# FIRST. Incorrectly configured parameters may cause damage.
+
+# See docs/Config_Reference.md for a description of parameters.
+
+[stepper_x]
+step_pin: PF0
+dir_pin: PF1
+enable_pin: !PD7
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^PE5
+position_endstop: 0
+position_max: 200
+homing_speed: 50
+
+[stepper_y]
+step_pin: PF6
+dir_pin: PF7
+enable_pin: !PF2
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^PJ1
+position_endstop: 0
+position_max: 200
+homing_speed: 50
+
+[stepper_z]
+step_pin: PL3
+dir_pin: PL1
+enable_pin: !PK0
+microsteps: 16
+rotation_distance: 8
+endstop_pin: ^PD3
+position_endstop: 0.5
+position_max: 200
+
+[extruder]
+step_pin: PA4
+dir_pin: PA6
+enable_pin: !PA2
+microsteps: 16
+rotation_distance: 33.500
+nozzle_diameter: 0.400
+filament_diameter: 1.750
+heater_pin: PB4
+sensor_type: ATC Semitec 104GT-2
+sensor_pin: PK5
+control: pid
+pid_Kp: 22.2
+pid_Ki: 1.08
+pid_Kd: 114
+min_temp: 0
+max_temp: 250
+
+[heater_bed]
+heater_pin: PH5
+sensor_type: EPCOS 100K B57560G104F
+sensor_pin: PK6
+control: watermark
+min_temp: 0
+max_temp: 130
+
+[fan]
+pin: PH6
+
+[mcu]
+serial: /dev/ttyACM0
+
+[printer]
+kinematics: corexz
+max_velocity: 300
+max_accel: 3000
+max_z_velocity: 50
+max_z_accel: 30

config/example-delta.cfg

@@ -0,0 +1,73 @@
+# This file is an example config file for linear delta style printers.
+# One may copy and edit this file to configure a new delta printer.
+
+# DO NOT COPY THIS FILE WITHOUT CAREFULLY READING AND UPDATING IT
+# FIRST. Incorrectly configured parameters may cause damage.
+
+# See docs/Config_Reference.md for a description of parameters.
+
+[stepper_a]
+step_pin: PF0
+dir_pin: PF1
+enable_pin: !PD7
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^PE4
+homing_speed: 50
+position_endstop: 297.05
+arm_length: 333.0
+
+[stepper_b]
+step_pin: PF6
+dir_pin: PF7
+enable_pin: !PF2
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^PJ0
+
+[stepper_c]
+step_pin: PL3
+dir_pin: PL1
+enable_pin: !PK0
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^PD2
+
+[extruder]
+step_pin: PA4
+dir_pin: PA6
+enable_pin: !PA2
+microsteps: 16
+rotation_distance: 33.500
+nozzle_diameter: 0.400
+filament_diameter: 1.750
+heater_pin: PB4
+sensor_type: ATC Semitec 104GT-2
+sensor_pin: PK5
+control: pid
+pid_Kp: 22.2
+pid_Ki: 1.08
+pid_Kd: 114
+min_temp: 0
+max_temp: 250
+
+[heater_bed]
+heater_pin: PH5
+sensor_type: EPCOS 100K B57560G104F
+sensor_pin: PK6
+control: watermark
+min_temp: 0
+max_temp: 130
+
+[mcu]
+serial: /dev/ttyACM0
+
+[printer]
+kinematics: delta
+max_velocity: 300
+max_accel: 3000
+max_z_velocity: 150
+delta_radius: 174.75
+
+[delta_calibrate]
+radius: 50

config/example-deltesian.cfg

@@ -0,0 +1,73 @@
+# This file is an example config file for deltesian style printers.
+# One may copy and edit this file to configure a new deltesian
+# printer.
+
+# DO NOT COPY THIS FILE WITHOUT CAREFULLY READING AND UPDATING IT
+# FIRST. Incorrectly configured parameters may cause damage.
+
+# See docs/Config_Reference.md for a description of parameters.
+
+[stepper_left]
+step_pin: PF0
+dir_pin: PF1
+enable_pin: !PD7
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^PE5
+homing_speed: 50
+position_endstop: 268
+arm_length: 217
+arm_x_length: 160
+
+[stepper_right]
+step_pin: PL3
+dir_pin: PL1
+enable_pin: !PK0
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^PD3
+
+[stepper_y]
+step_pin: PF6
+dir_pin: !PF7
+enable_pin: !PF2
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^PJ1
+position_endstop: 0
+position_max: 200
+
+[extruder]
+step_pin: PA4
+dir_pin: PA6
+enable_pin: !PA2
+microsteps: 16
+rotation_distance: 33.500
+nozzle_diameter: 0.500
+filament_diameter: 3.500
+heater_pin: PB4
+sensor_type: EPCOS 100K B57560G104F
+sensor_pin: PK5
+control: pid
+pid_Kp: 22.2
+pid_Ki: 1.08
+pid_Kd: 114
+min_temp: 0
+max_temp: 210
+
+[heater_bed]
+heater_pin: PH5
+sensor_type: EPCOS 100K B57560G104F
+sensor_pin: PK6
+control: watermark
+min_temp: 0
+max_temp: 110
+
+[mcu]
+serial: /dev/ttyACM0
+
+[printer]
+kinematics: deltesian
+max_velocity: 500
+max_accel: 3000
+max_z_velocity: 150

config/example-extras.cfg

@@ -0,0 +1,4 @@
+# Documentation on config parameters has moved to: docs/Config_Reference.md
+
+# The latest version of the config reference is also available online at:
+#   https://www.klipper3d.org/Config_Reference.html

config/example-hybrid-corexy.cfg

@@ -0,0 +1,79 @@
+# This file is an example config file for hybrid corexy style printers also
+# known as Markforged kinematic. One may copy and edit this file to configure
+# a new hybrid corexy printer.
+
+# DO NOT COPY THIS FILE WITHOUT CAREFULLY READING AND UPDATING IT
+# FIRST. Incorrectly configured parameters may cause damage.
+
+# See docs/Config_Reference.md for a description of parameters.
+
+[stepper_x]
+step_pin: PF0
+dir_pin: PF1
+enable_pin: !PD7
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^PE5
+position_endstop: 0
+position_max: 200
+homing_speed: 50
+
+[stepper_y]
+step_pin: PF6
+dir_pin: PF7
+enable_pin: !PF2
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^PJ1
+position_endstop: 0
+position_max: 200
+homing_speed: 50
+
+[stepper_z]
+step_pin: PL3
+dir_pin: PL1
+enable_pin: !PK0
+microsteps: 16
+rotation_distance: 8
+endstop_pin: ^PD3
+position_endstop: 0.5
+position_max: 200
+
+[extruder]
+step_pin: PA4
+dir_pin: PA6
+enable_pin: !PA2
+microsteps: 16
+rotation_distance: 33.500
+nozzle_diameter: 0.400
+filament_diameter: 1.750
+heater_pin: PB4
+sensor_type: ATC Semitec 104GT-2
+sensor_pin: PK5
+control: pid
+pid_Kp: 22.2
+pid_Ki: 1.08
+pid_Kd: 114
+min_temp: 0
+max_temp: 250
+
+[heater_bed]
+heater_pin: PH5
+sensor_type: EPCOS 100K B57560G104F
+sensor_pin: PK6
+control: watermark
+min_temp: 0
+max_temp: 130
+
+[fan]
+pin: PH6
+
+[mcu]
+serial: /dev/ttyACM0
+
+[printer]
+kinematics: hybrid_corexy
+max_velocity: 300
+max_accel: 3000
+max_z_velocity: 25
+max_z_accel: 30

config/example-hybrid-corexz.cfg

@@ -0,0 +1,79 @@
+# This file is an example config file for hybrid corexz style printers also
+# known as Markforged kinematic. One may copy and edit this file to configure
+# a new hybrid corexy printer.
+
+# DO NOT COPY THIS FILE WITHOUT CAREFULLY READING AND UPDATING IT
+# FIRST. Incorrectly configured parameters may cause damage.
+
+# See docs/Config_Reference.md for a description of parameters.
+
+[stepper_x]
+step_pin: PF0
+dir_pin: PF1
+enable_pin: !PD7
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^PE5
+position_endstop: 0
+position_max: 200
+homing_speed: 50
+
+[stepper_y]
+step_pin: PF6
+dir_pin: PF7
+enable_pin: !PF2
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^PJ1
+position_endstop: 0
+position_max: 200
+homing_speed: 50
+
+[stepper_z]
+step_pin: PL3
+dir_pin: PL1
+enable_pin: !PK0
+microsteps: 16
+rotation_distance: 8
+endstop_pin: ^PD3
+position_endstop: 0.5
+position_max: 200
+
+[extruder]
+step_pin: PA4
+dir_pin: PA6
+enable_pin: !PA2
+microsteps: 16
+rotation_distance: 33.500
+nozzle_diameter: 0.400
+filament_diameter: 1.750
+heater_pin: PB4
+sensor_type: ATC Semitec 104GT-2
+sensor_pin: PK5
+control: pid
+pid_Kp: 22.2
+pid_Ki: 1.08
+pid_Kd: 114
+min_temp: 0
+max_temp: 250
+
+[heater_bed]
+heater_pin: PH5
+sensor_type: EPCOS 100K B57560G104F
+sensor_pin: PK6
+control: watermark
+min_temp: 0
+max_temp: 130
+
+[fan]
+pin: PH6
+
+[mcu]
+serial: /dev/ttyACM0
+
+[printer]
+kinematics: hybrid_corexz
+max_velocity: 300
+max_accel: 3000
+max_z_velocity: 25
+max_z_accel: 30

config/example-polar.cfg

@@ -0,0 +1,74 @@
+# This file is an example config file for polar style printers. One
+# may copy and edit this file to configure a new polar printer.
+
+# POLAR KINEMATICS ARE A WORK IN PROGRESS. Moves around the 0, 0
+# position are known to not work properly.
+
+# See docs/Config_Reference.md for a description of parameters.
+
+[stepper_bed]
+step_pin: PF0
+dir_pin: PF1
+enable_pin: !PD7
+microsteps: 16
+gear_ratio: 80:16
+
+[stepper_arm]
+step_pin: PF6
+dir_pin: PF7
+enable_pin: !PF2
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^PJ1
+position_endstop: 300
+position_max: 300
+homing_speed: 50
+
+[stepper_z]
+step_pin: PL3
+dir_pin: PL1
+enable_pin: !PK0
+microsteps: 16
+rotation_distance: 8
+endstop_pin: ^PD3
+position_endstop: 0.5
+position_max: 200
+
+[extruder]
+step_pin: PA4
+dir_pin: PA6
+enable_pin: !PA2
+microsteps: 16
+rotation_distance: 33.500
+nozzle_diameter: 0.400
+filament_diameter: 1.750
+heater_pin: PB4
+sensor_type: ATC Semitec 104GT-2
+sensor_pin: PK5
+control: pid
+pid_Kp: 22.2
+pid_Ki: 1.08
+pid_Kd: 114
+min_temp: 0
+max_temp: 250
+
+[heater_bed]
+heater_pin: PH5
+sensor_type: EPCOS 100K B57560G104F
+sensor_pin: PK6
+control: watermark
+min_temp: 0
+max_temp: 130
+
+[fan]
+pin: PH6
+
+[mcu]
+serial: /dev/ttyACM0
+
+[printer]
+kinematics: polar
+max_velocity: 300
+max_accel: 3000
+max_z_velocity: 25
+max_z_accel: 30

config/example-rotary-delta.cfg

@@ -0,0 +1,75 @@
+# This file is an example config file for rotary delta style printers.
+# One may copy and edit this file to configure a new delta printer.
+
+# ROTARY DELTA KINEMATICS ARE A WORK IN PROGRESS. Homing moves may
+# timeout and some boundary checks are not implemented.
+
+# See docs/Config_Reference.md for a description of parameters.
+
+[stepper_a]
+step_pin: PF0
+dir_pin: PF1
+enable_pin: !PD7
+microsteps: 16
+gear_ratio: 107.000:16, 60:16
+endstop_pin: ^PE4
+homing_speed: 50
+position_endstop: 252
+upper_arm_length: 170.000
+lower_arm_length: 320.000
+
+[stepper_b]
+step_pin: PF6
+dir_pin: PF7
+enable_pin: !PF2
+microsteps: 16
+gear_ratio: 107.000:16, 60:16
+endstop_pin: ^PJ0
+
+[stepper_c]
+step_pin: PL3
+dir_pin: PL1
+enable_pin: !PK0
+microsteps: 16
+gear_ratio: 107.000:16, 60:16
+endstop_pin: ^PD2
+
+[extruder]
+step_pin: PA4
+dir_pin: PA6
+enable_pin: !PA2
+microsteps: 16
+rotation_distance: 33.500
+nozzle_diameter: 0.400
+filament_diameter: 1.750
+heater_pin: PB4
+sensor_type: ATC Semitec 104GT-2
+sensor_pin: PK5
+control: pid
+pid_Kp: 22.2
+pid_Ki: 1.08
+pid_Kd: 114
+min_temp: 0
+max_temp: 250
+
+[heater_bed]
+heater_pin: PH5
+sensor_type: EPCOS 100K B57560G104F
+sensor_pin: PK6
+control: watermark
+min_temp: 0
+max_temp: 130
+
+[mcu]
+serial: /dev/ttyACM0
+
+[printer]
+kinematics: rotary_delta
+max_velocity: 300
+max_accel: 3000
+max_z_velocity: 50
+shoulder_radius: 33.900
+shoulder_height: 412.900
+
+[delta_calibrate]
+radius: 50

config/example-winch.cfg

@@ -0,0 +1,85 @@
+# This file is an example config file for cable winch style printers.
+# One may copy and edit this file to configure a new cable winch
+# printer.
+
+# CABLE WINCH SUPPORT IS EXPERIMENTAL - PROCEED WITH CAUTION!
+
+# Homing is not implemented on cable winch kinematics. In order to
+# home the printer, manually send movement commands until the toolhead
+# is at 0, 0, 0 and then issue a G28 command.
+
+# See docs/Config_Reference.md for a description of parameters.
+
+[stepper_a]
+step_pin: PF0
+dir_pin: PF1
+enable_pin: !PD7
+microsteps: 16
+rotation_distance: 40
+anchor_x: 0
+anchor_y: -2000
+anchor_z: -100
+
+[stepper_b]
+step_pin: PF6
+dir_pin: PF7
+enable_pin: !PF2
+microsteps: 16
+rotation_distance: 40
+anchor_x: 2000
+anchor_y: 1000
+anchor_z: -100
+
+[stepper_c]
+step_pin: PL3
+dir_pin: PL1
+enable_pin: !PK0
+microsteps: 16
+rotation_distance: 40
+anchor_x: -2000
+anchor_y: 1000
+anchor_z: -100
+
+[stepper_d]
+step_pin: PC1
+dir_pin: PC3
+enable_pin: !PC7
+microsteps: 16
+rotation_distance: 40
+anchor_x: 0
+anchor_y: 0
+anchor_z: 3000
+
+[extruder]
+step_pin: PA4
+dir_pin: PA6
+enable_pin: !PA2
+microsteps: 16
+rotation_distance: 33.500
+nozzle_diameter: 0.400
+filament_diameter: 1.750
+heater_pin: PB4
+sensor_type: ATC Semitec 104GT-2
+sensor_pin: PK5
+control: pid
+pid_Kp: 22.2
+pid_Ki: 1.08
+pid_Kd: 114
+min_temp: 0
+max_temp: 250
+
+[heater_bed]
+heater_pin: PH5
+sensor_type: EPCOS 100K B57560G104F
+sensor_pin: PK6
+control: watermark
+min_temp: 0
+max_temp: 130
+
+[mcu]
+serial: /dev/ttyACM0
+
+[printer]
+kinematics: winch
+max_velocity: 300
+max_accel: 3000

config/example.cfg

@@ -1,173 +1,4 @@
-# This file serves as documentation for config parameters. One may
-# copy and edit this file to configure a new printer.
+# Documentation on config parameters has moved to: docs/Config_Reference.md
 
-# DO NOT COPY THIS FILE WITHOUT CAREFULLY READING AND UPDATING IT
-# FIRST. Incorrectly configured parameters may cause damage.
-
-# A note on pin names: pins may be configured with a hardware name
-# (such as PA4) or with a board name (such as ar29). In order to use a
-# board name, the pin_map variable in the mcu section must specify
-# which board definition to use. (See the klippy/pins.py file for the
-# available pin and board names.)
-# Pin names may be preceded by an '!' to indicate that a reverse
-# polarity should be used (eg, trigger on low instead of high). Input
-# pins may be prceded by an '^' to indicate that a hardware pull-up
-# resistor should be enabled for the pin.
-
-
-# The stepper_x section is used to describe the stepper controlling
-# the X axis in a cartesian robot
-[stepper_x]
-step_pin: ar29
-#   Step GPIO pin (triggered high)
-dir_pin: ar28
-#   Direction GPIO pin (low indicates positive direction)
-enable_pin: !ar25
-#   Enable pin (default is enable high; use ! to indicate enable low)
-step_distance: .0225
-#   Distance in mm that each step causes the axis to travel
-max_velocity: 500
-#   Maximum velocity (in mm/s) of the stepper
-max_accel: 3000
-#   Maximum acceleration (in mm/s^2) of the stepper
-endstop_pin: ^ar0
-#   Endstop switch detection pin
-homing_speed: 50.0
-#   Maximum velocity (in mm/s) of the stepper when homing
-homing_retract_dist: 5.0
-#   Distance to backoff (in mm) before homing a second time during homing
-homing_positive_dir: False
-#   If true, homes in a positive direction (away from zero)
-position_min: -0.25
-#   Minimum valid distance (in mm) the user may command the stepper to
-#   move to (not currently enforced)
-position_endstop: 0
-#   Location of the endstop (in mm)
-position_max: 200
-#   Maximum valid distance (in mm) the user may command the stepper to
-#   move to (not currently enforced)
-
-# The stepper_y section is used to describe the stepper controlling
-# the Y axis in a cartesian robot. It has the same settings as the
-# stepper_x section
-[stepper_y]
-step_pin: ar27
-dir_pin: ar26
-enable_pin: !ar25
-step_distance: .0225
-max_velocity: 500
-max_accel: 3000
-endstop_pin: ^ar1
-position_min: -0.25
-position_endstop: 0
-position_max: 200
-
-# The stepper_z section is used to describe the stepper controlling
-# the Z axis in a cartesian robot. It has the same settings as the
-# stepper_x section
-[stepper_z]
-step_pin: ar23
-dir_pin: ar22
-enable_pin: !ar25
-step_distance: .005
-max_velocity: 250
-max_accel: 30
-endstop_pin: ^ar2
-position_min: 0.1
-position_endstop: 0.5
-position_max: 200
-
-# The stepper_e section is used to describe the stepper controlling
-# the printer extruder. It has the same settings as the stepper_x
-# section
-[stepper_e]
-step_pin: ar19
-dir_pin: ar18
-enable_pin: !ar25
-step_distance: .004242
-max_velocity: 200000
-max_accel: 3000
-
-# The heater_nozzle section describes the extruder and extruder heater
-[heater_nozzle]
-heater_pin: ar4
-#   PWM output pin controlling the heater
-thermistor_pin: analog1
-#   Analog input pin connected to thermistor
-thermistor_type: EPCOS 100K B57560G104F
-#   Type of thermistor (see klippy/heater.py for available types)
-pullup_resistor: 4700
-#   The resistance (in ohms) of the pullup attached to the thermistor
-control: pid
-#   Control algorithm (either pid or watermark)
-pid_Kp: 22.2
-#   Kp is the "proportional" constant for the pid
-pid_Ki: 1.08
-#   Ki is the "integral" constant for the pid
-pid_Kd: 114
-#   Kd is the "derivative" constant for the pid
-pid_deriv_time: 2.0
-#   A time value (in seconds) over which the derivative in the pid
-#   will be smoothed to reduce the impact of measurement noise
-pid_integral_max: 255
-#   The maximum "windup" the integral term may accumulate
-min_temp: 0
-#   Minimum temperature in Celsius (mcu will shutdown if not met)
-max_temp: 210
-#   Maximum temperature (mcu will shutdown if temperature is above
-#   this value)
-
-# The heater_bed section describes a heated bed (if present - omit
-# section if not present). It has the same settings as the
-# heater_nozzle section
-[heater_bed]
-heater_pin: ar3
-thermistor_pin: analog0
-thermistor_type: EPCOS 100K B57560G104F
-control: watermark
-max_delta: 2.0
-#   The number of degrees in Celsius above the target temperature
-#   before disabling the heater as well as the number of degrees below
-#   the target before re-enabling the heater.
-min_temp: 0
-max_temp: 110
-
-# Extruder print fan (omit section if fan not present)
-[fan]
-pin: ar14
-#   PWM output pin controlling the heater
-hard_pwm: 1
-#   Set this value to force hardware PWM instead of software PWM. Set
-#   to 1 to force a hardware PWM at the fastest rate; set to a higher
-#   number (eg, 1024) to force hardware PWM with the given cycle time
-#   in clock ticks.
-kick_start_time: 0.100
-#   Time (in seconds) to run the fan at full speed when first enabling
-#   it (helps get the fan spinning)
-
-# Micro-controller information
-[mcu]
-serial: /dev/ttyACM0
-#   The serial port to connect to the MCU
-baud: 115200
-#   The baud rate to use
-pin_map: arduino
-#   This option may be used to add board specific pin name aliases
-custom:
-#   This option may be used to specify a set of custom
-#   micro-controller commands to be sent at the start of the
-#   connection. It may be used to configure the initial settings of
-#   LEDs, to configure micro-stepping pins, to configure a digipot,
-#   etc.
-
-# The printer section controls high level printer settings
-[printer]
-kinematics: cartesian
-#   This option must currently always be "cartesian"
-motor_off_time: 60
-#   Time (in seconds) of idle time before the printer will try to
-#   disable active motors.
-junction_deviation: 0.02
-#   Distance (in mm) used to control the internal approximated
-#   centripetal velocity cornering algorithm. A larger number will
-#   permit higher "cornering speeds" at the junction of two moves.
+# The latest version of the config reference is also available online at:
+#   https://www.klipper3d.org/Config_Reference.html

config/generic-alligator-r2.cfg

@@ -0,0 +1,147 @@
+# This file contains common pin mappings for Alligator (Rev.2) board.
+# To use this config, the firmware should be compiled for the Arduino
+# Due.
+
+# Remember flash procedure:
+# sudo /etc/init.d/alligator-manager --erase
+# sudo bossac -e -w -v -b -R -i -p ttyAMA0 klipper.bin
+# See alligator github for alligator manager:
+# https://github.com/3Dartists/alligator-manager
+
+# See docs/Config_Reference.md for a description of parameters.
+
+[static_digital_output DRV8825_microstepping]
+pins:PC10
+pins:PC29
+pins:PC19
+pins:PC18
+
+[dac084S085 stepper_digipot]
+enable_pin: PB14
+spi_bus: spi0
+# Scale the config so that the channel value can be specified in amps.
+# (For Alligator v2.0 boards, use 2.50)
+scale: 2.50
+# Channel A in this example is X, B is Y, C is Z, D is E0,1,2,3.
+channel_A: 1.5
+channel_B: 1.5
+channel_C: 1.5
+channel_D: 1.0
+# channel D will be the current used by all extruders if> 1
+
+[stepper_x]
+step_pin: PB24
+dir_pin: !PB25
+enable_pin: !PA15
+microsteps: 32 # number of microstep 16, 32
+rotation_distance: 16
+endstop_pin: ^!PC5
+position_endstop: -30
+position_max: 220
+position_min: -30
+homing_speed: 50
+
+[stepper_y]
+step_pin: PB22
+dir_pin: !PB23
+enable_pin: !PA15
+microsteps: 32
+rotation_distance: 16
+endstop_pin: ^!PC3
+position_endstop: -8
+position_min: -8
+position_max: 220
+homing_speed: 50
+
+[stepper_z]
+step_pin: PC27
+dir_pin: PC28
+enable_pin: !PA15
+microsteps: 32
+rotation_distance: 4
+endstop_pin: ^!PC2
+position_endstop: 0
+position_max: 240
+position_min: -1
+
+[extruder]
+step_pin: PC25
+dir_pin: PC26
+enable_pin: !PA15
+microsteps: 32
+rotation_distance: 7
+nozzle_diameter: 0.400
+filament_diameter: 1.750
+heater_pin: PA1
+sensor_pin: PA16 # PA16(near mcu) or PA24(near ethernet)
+sensor_type: ATC Semitec 104NT-4-R025H42G
+control: pid
+pid_kp: 15.572
+pid_ki: 0.446
+pid_kd: 136.064
+min_temp: 0
+max_temp: 270
+
+#[extruder1]
+#step_pin: PD3
+#dir_pin: !PD2
+#enable_pin: !PA15
+#microsteps: 32
+#heater_pin: PC22
+#sensor_pin: PB25
+
+#[extruder2]
+#step_pin: PD7
+#dir_pin: !PD6
+#enable_pin: !PA15
+#microsteps: 32
+#heater_pin: PC21
+#sensor_pin: PC28
+
+#[extruder3]
+#step_pin: PD9
+#dir_pin: !PD8
+#enable_pin: !PA15
+#microsteps: 32
+#heater_pin: PA29
+#sensor_pin: PC5
+
+[heater_bed]
+heater_pin: PA0
+sensor_type: EPCOS 100K B57560G104F
+sensor_pin: PA24 # PA16(near mcu) or PA24(near ethernet)
+control: pid
+pid_kp: 73.517
+pid_ki: 1.132
+pid_kd: 1193.728
+min_temp: 0
+max_temp: 130
+
+[fan]
+pin: PA7
+
+#[heater_fan fan1]
+#pin: PA5
+#heater: extruder
+
+[output_pin BEEPER_pin]
+pin: PB19
+pwm: True
+value: 0
+shutdown_value: 0
+cycle_time: 0.1
+scale: 1000
+
+[mcu]
+serial: /dev/ttyAMA0
+
+[printer]
+kinematics: cartesian
+max_velocity: 300
+max_accel: 1000
+max_z_velocity: 20
+max_z_accel: 100
+
+#[bltouch]
+#sensor_pin: ^PC6
+#control_pin: PC4

config/generic-alligator-r3.cfg

@@ -0,0 +1,135 @@
+# This file contains common pin mappings for Alligator (Rev.3) board.
+# To use this config, the firmware should be compiled for the Arduino
+# Due.
+
+# Remember flash procedure:
+# sudo /etc/init.d/alligator-manager --erase
+# sudo bossac -e -w -v -b -R -i -p ttyAMA0 klipper.bin
+# See alligator github for alligator manager:
+# https://github.com/3Dartists/alligator-manager
+
+# See docs/Config_Reference.md for a description of parameters.
+
+[static_digital_output DRV8825_microstepping]
+pins:PC10
+pins:PC29
+pins:PC19
+pins:PC18
+
+[dac084S085 stepper_digipot]
+enable_pin: PD2
+spi_bus: spi0
+# Scale the config so that the channel value can be specified in amps.
+# (For Alligator v3.0 boards, use 2.50)
+scale: 2.50
+# Channel A in this example is X, B is Y, C is Z, D is E0,1,2,3.
+channel_A: 1.5
+channel_B: 1.5
+channel_C: 1.5
+channel_D: 1.0
+# channel D will be the current used by all extruders if> 1
+
+[stepper_x]
+step_pin: PB24
+dir_pin: !PB25
+enable_pin: !PA15
+microsteps: 32 # number of microstep 16, 32
+rotation_distance: 16
+endstop_pin: ^!PC5
+position_endstop: -30
+position_max: 220
+position_min: -30
+homing_speed: 50
+
+[stepper_y]
+step_pin: PB22
+dir_pin: !PB23
+enable_pin: !PC28
+microsteps: 32
+rotation_distance: 16
+endstop_pin: ^!PC3
+position_endstop: -8
+position_min: -8
+position_max: 220
+homing_speed: 50
+
+[stepper_z]
+step_pin: PB20
+dir_pin: PB21
+enable_pin: !PA29
+microsteps: 32
+rotation_distance: 4
+endstop_pin: ^!PC2
+position_endstop: 0
+position_max: 240
+position_min: -1
+
+[extruder]
+step_pin: PB18
+dir_pin: PB19
+enable_pin: !PC27
+microsteps: 32
+rotation_distance: 7
+nozzle_diameter: 0.400
+filament_diameter: 1.750
+heater_pin: PA19
+sensor_pin: PC25
+sensor_type: ATC Semitec 104NT-4-R025H42G
+control: pid
+pid_kp: 15.572
+pid_ki: 0.446
+pid_kd: 136.064
+min_temp: 0
+max_temp: 270
+
+#[extruder1]
+#step_pin: PB17
+#dir_pin: !PB14
+#enable_pin: !PD6
+#microsteps: 32
+#heater_pin: PC22
+#sensor_pin: PA29
+
+#[extruder2]
+#step_pin: PB12
+#dir_pin: !PB13
+#enable_pin: !PD8
+#microsteps: 32
+#heater_pin: PC21
+#sensor_pin: PC28
+
+#[extruder3]
+#step_pin: PB15
+#dir_pin: !PB16
+#enable_pin: !PD9
+#microsteps: 32
+#heater_pin: PA29
+#sensor_pin: PB25
+
+[heater_bed]
+heater_pin: PA0
+sensor_type: EPCOS 100K B57560G104F
+sensor_pin: PA8
+control: pid
+pid_kp: 73.517
+pid_ki: 1.132
+pid_kd: 1193.728
+min_temp: 0
+max_temp: 130
+
+[fan]
+pin: PA7
+
+#[heater_fan fan1]
+#pin: PA5
+#heater: extruder
+
+[mcu]
+serial: /dev/ttyAMA0
+
+[printer]
+kinematics: cartesian
+max_velocity: 300
+max_accel: 1000
+max_z_velocity: 20
+max_z_accel: 100

config/generic-archim2.cfg

@@ -0,0 +1,160 @@
+# This file contains common pin mappings for Ultimachine Archim2
+# boards. To use this config, the firmware should be compiled for the
+# SAM3x8e.
+
+# See docs/Config_Reference.md for a description of parameters.
+
+[stepper_x]
+step_pin: PC6
+dir_pin: PC5
+enable_pin: !PC9
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^PD4
+position_endstop: 0
+position_max: 200
+homing_speed: 50
+
+[tmc2130 stepper_x]
+cs_pin: PC7
+run_current: .5
+sense_resistor: 0.120
+diag1_pin: !PA4
+spi_software_sclk_pin: PD2
+spi_software_mosi_pin: PD3
+spi_software_miso_pin: PD1
+
+[stepper_y]
+step_pin: PC12
+dir_pin: PC11
+enable_pin: !PC14
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^PD6
+position_endstop: 0
+position_max: 400
+homing_speed: 50
+
+[tmc2130 stepper_y]
+cs_pin: PC13
+run_current: .5
+sense_resistor: 0.120
+diag1_pin: !PC15
+spi_software_sclk_pin: PD2
+spi_software_mosi_pin: PD3
+spi_software_miso_pin: PD1
+
+[stepper_z]
+step_pin: PC17
+dir_pin: PC16
+enable_pin: !PC19
+microsteps: 16
+rotation_distance: 8
+endstop_pin: ^PA7
+position_endstop: 0
+position_max: 400
+homing_speed: 50
+
+[tmc2130 stepper_z]
+cs_pin: PC18
+run_current: .5
+sense_resistor: 0.120
+diag1_pin: PC4
+spi_software_sclk_pin: PD2
+spi_software_mosi_pin: PD3
+spi_software_miso_pin: PD1
+
+[extruder]
+step_pin: PB10
+dir_pin: PC10
+enable_pin: !PB22
+microsteps: 16
+rotation_distance: 33.500
+nozzle_diameter: 0.400
+filament_diameter: 1.750
+heater_pin: PC24
+sensor_type: ATC Semitec 104GT-2
+sensor_pin: PB19
+control: pid
+pid_Kp: 22.2
+pid_Ki: 1.08
+pid_Kd: 114
+min_temp: 0
+max_temp: 250
+
+[tmc2130 extruder]
+cs_pin: PC20
+run_current: .5
+sense_resistor: 0.120
+diag1_pin: !PB23
+spi_software_sclk_pin: PD2
+spi_software_mosi_pin: PD3
+spi_software_miso_pin: PD1
+
+#[extruder1]
+#step_pin: PB26
+#dir_pin: PB24
+#enable_pin: !PA11
+#microsteps: 16
+#rotation_distance: 33.500
+#nozzle_diameter: 0.400
+#filament_diameter: 1.750
+#heater_pin: PC23
+#sensor_type: ATC Semitec 104GT-2
+#sensor_pin: PB18
+#control: pid
+#pid_Kp: 22.2
+#pid_Ki: 1.08
+#pid_Kd: 114
+#min_temp: 0
+#max_temp: 250
+
+#[tmc2130 extruder1]
+#cs_pin: PA10
+#run_current: .5
+#sense_resistor: 0.120
+#diag1_pin: PD0
+#spi_software_sclk_pin: PD2
+#spi_software_mosi_pin: PD3
+#spi_software_miso_pin: PD1
+
+[heater_bed]
+heater_pin: PC21
+sensor_type: EPCOS 100K B57560G104F
+sensor_pin: PB20
+control: watermark
+min_temp: 0
+max_temp: 130
+
+[fan]
+pin: PC26
+
+[heater_fan heatbreak_cooling_fan]
+pin: PC25
+
+[mcu]
+serial: /dev/serial/by-id/usb-Klipper_sam3x8e_nnn
+
+[printer]
+kinematics: cartesian
+max_velocity: 300
+max_accel: 3000
+max_z_velocity: 5
+max_z_accel: 100
+
+
+########################################
+# EXP1 / EXP2 (display) pins
+########################################
+
+[board_pins]
+aliases:
+    # EXP1 header
+    EXP1_1=PA14, EXP1_3=PA15, EXP1_5=PA0,  EXP1_7=PA1, EXP1_9=<GND>,
+    EXP1_2=PA13, EXP1_4=PA12, EXP1_6=PA16, EXP1_8=PC2, EXP1_10=<5V>,
+    # EXP2 header
+    EXP2_1=PA25, EXP2_3=PB27, EXP2_5=PA3,  EXP2_7=PB25,  EXP2_9=<GND>,
+    EXP2_2=PA27, EXP2_4=PA29, EXP2_6=PA26, EXP2_8=<RST>, EXP2_10=<3.3V>
+    # Pins EXP2_1, EXP2_6, EXP2_2 are also MISO, MOSI, SCK of bus "spi0"
+
+# See the sample-lcd.cfg file for definitions of common LCD displays.

config/generic-azteeg-x5-mini-v3.cfg

@@ -0,0 +1,94 @@
+# This file contains common pin mappings for the Azteeg X5 Mini v3. To use
+# this config, the firmware should be compiled for the LPC1769.
+
+# See docs/Config_Reference.md for a description of parameters.
+
+[stepper_x]
+step_pin: P2.1
+dir_pin: P0.11
+enable_pin: !P0.10
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^P1.24
+position_endstop: 0
+position_max: 200
+homing_speed: 50
+
+[stepper_y]
+step_pin: P2.2
+dir_pin: P0.20
+enable_pin: !P0.19
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^P1.26
+position_endstop: 0
+position_max: 200
+homing_speed: 50
+
+[stepper_z]
+step_pin: P2.3
+dir_pin: P0.22
+enable_pin: !P0.21
+microsteps: 16
+rotation_distance: 8
+endstop_pin: ^P1.28
+position_endstop: 0
+position_max: 200
+homing_speed: 50
+
+[extruder]
+step_pin: P2.0
+dir_pin: P0.5
+enable_pin: !P0.4
+microsteps: 16
+rotation_distance: 33.500
+nozzle_diameter: 0.400
+filament_diameter: 1.750
+heater_pin: P2.5
+sensor_type: EPCOS 100K B57560G104F
+sensor_pin: P0.24
+control: pid
+pid_Kp: 22.2
+pid_Ki: 1.08
+pid_Kd: 114
+min_temp: 0
+max_temp: 250
+
+[heater_bed]
+heater_pin: P2.7
+sensor_type: EPCOS 100K B57560G104F
+sensor_pin: P0.23
+control: watermark
+min_temp: 0
+max_temp: 130
+
+[fan]
+pin: P0.26
+
+[mcu]
+serial: /dev/serial/by-id/usb-Klipper_Klipper_firmware_12345-if00
+
+[printer]
+kinematics: cartesian
+max_velocity: 300
+max_accel: 3000
+max_z_velocity: 5
+max_z_accel: 100
+
+[mcp4451 stepper_digipot1]
+i2c_address: 44
+# Scale the config so that wiper values can be specified in amps.
+scale: 2
+# wiper 0 is X (aka alpha), 1 is Y, 2 is Z, 3 is E0
+wiper_0: 1.0
+wiper_1: 1.0
+wiper_2: 1.0
+wiper_3: 1.0
+
+# Mini Viki2 LCD - this board does not work with Reprap LCDs
+#[display]
+#lcd_type: uc1701
+#cs_pin: P0.16
+#a0_pin: P2.6
+#encoder_pins: ^!P3.25, ^P3.26
+#click_pin: ^!P2.11

config/generic-bigtreetech-e3-rrf-v1.1.cfg

@@ -0,0 +1,117 @@
+# This file contains common pin mappings for the BigTreeTech E3 RRF 1.1.
+# To use this config, the firmware should be compiled for the
+# STM32F407 with a "32KiB bootloader".
+
+# The "make flash" command does not work on the E3 RRF 1.1. Instead,
+# after running "make", copy the generated "out/klipper.bin" file to a
+# file named "firmware.bin" on an SD card and then restart the E3 RRF
+# 1.1 with that SD card.
+
+# See docs/Config_Reference.md for a description of parameters.
+
+[stepper_x]
+step_pin: PD5
+dir_pin: !PD4
+enable_pin: !PD7
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^PC0
+position_endstop: 0
+position_max: 235
+homing_speed: 50
+
+[tmc2209 stepper_x]
+uart_pin: PD6
+run_current: 0.580
+stealthchop_threshold: 999999
+
+[stepper_y]
+step_pin: PD0
+dir_pin: !PA15
+enable_pin: !PD3
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^PC1
+position_endstop: 0
+position_max: 235
+homing_speed: 50
+
+[tmc2209 stepper_y]
+uart_pin: PD1
+run_current: 0.580
+stealthchop_threshold: 999999
+
+[stepper_z]
+step_pin: PC6
+dir_pin: PC7
+enable_pin: !PD14
+microsteps: 16
+rotation_distance: 8
+endstop_pin: ^PC2
+position_endstop: 0.0
+position_max: 250
+
+[tmc2209 stepper_z]
+uart_pin: PD15
+run_current: 0.580
+stealthchop_threshold: 999999
+
+[extruder]
+step_pin: PD12
+dir_pin: !PD13
+enable_pin: !PD10
+microsteps: 16
+rotation_distance: 33.500
+nozzle_diameter: 0.400
+filament_diameter: 1.750
+heater_pin: PB3
+sensor_type: EPCOS 100K B57560G104F
+sensor_pin: PA0
+control: pid
+pid_Kp: 21.527
+pid_Ki: 1.063
+pid_Kd: 108.982
+min_temp: 0
+max_temp: 250
+
+[tmc2209 extruder]
+uart_pin: PD11
+run_current: 0.650
+stealthchop_threshold: 999999
+
+[heater_bed]
+heater_pin: PB4
+sensor_type: EPCOS 100K B57560G104F
+sensor_pin: PA1
+control: pid
+pid_Kp: 54.027
+pid_Ki: 0.770
+pid_Kd: 948.182
+min_temp: 0
+max_temp: 130
+
+[heater_fan heatbreak_cooling_fan]
+pin: PB6
+
+[fan]
+pin: PB5
+
+[mcu]
+serial: /dev/serial/by-id/usb-Klipper_stm32f407xx_370025000247303034313331-if00
+
+[printer]
+kinematics: cartesian
+max_velocity: 300
+max_accel: 3000
+max_z_velocity: 5
+max_z_accel: 100
+
+# Warning: display section not tested!
+
+[board_pins]
+aliases:
+    # EXP1 header
+    EXP1_1=PE8, EXP1_3=PE7,   EXP1_5=PB2,  EXP1_7=PB1,  EXP1_9=<GND>,
+    EXP1_2=PE9, EXP1_4=<RST>, EXP1_6=PE10, EXP1_8=PE11, EXP1_10=<5V>
+
+# See the sample-lcd.cfg file for definitions of common LCD displays.

config/generic-bigtreetech-gtr.cfg

@@ -0,0 +1,300 @@
+# This file contains common pin mappings for the BigTreeTech GTR.
+# To use this config, the firmware should be compiled for the
+# STM32F407 with a "32KiB bootloader".
+
+# The "make flash" command does not work on the GTR. Instead,
+# after running "make", copy the generated "klipper/out/klipper.bin" file to a
+# file named "firmware.bin" on an SD card and then restart the GTR
+# with that SD card.
+
+# See docs/Config_Reference.md for a description of parameters.
+
+[stepper_x]
+step_pin: PC15
+dir_pin: PF0
+enable_pin: !PF1
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^!PF2
+position_endstop: 0
+position_max: 220
+homing_speed: 50
+
+[stepper_y]
+step_pin: PE3
+dir_pin: PE2
+enable_pin: !PE4
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^!PC13
+position_endstop: 0
+position_max: 250
+homing_speed: 50
+
+[stepper_z]
+step_pin: PB8
+dir_pin: PB7
+enable_pin: !PB9
+microsteps: 16
+rotation_distance: 8
+endstop_pin: ^PE0
+position_endstop: 0
+position_max: 200
+homing_speed: 12
+second_homing_speed: 1
+
+[extruder]
+step_pin: PG12
+dir_pin: PG11
+enable_pin: !PG13
+microsteps: 16
+rotation_distance: 33.500
+nozzle_diameter: 0.400
+filament_diameter: 1.750
+heater_pin: PB1 # Heat0
+sensor_pin:  PC1 # T0 Header
+sensor_type: EPCOS 100K B57560G104F
+control: pid
+pid_Kp: 22.2
+pid_Ki: 1.08
+pid_Kd: 114
+min_temp: 0
+max_temp: 290
+
+#[extruder1]
+#step_pin: PD6
+#dir_pin: PD5
+#enable_pin: !PD7
+#heater_pin: PA1 # Heat1
+#sensor_pin: PC2 # T1
+#...
+
+#[extruder2]
+#step_pin: PD1
+#dir_pin: PD0
+#enable_pin: !PD2
+#heater_pin: PB0 # Heat2
+#sensor_pin: PC3 # T2
+#...
+
+[heater_bed]
+heater_pin: PA2
+sensor_pin: PC0 # BED
+sensor_type: ATC Semitec 104GT-2
+control: watermark
+min_temp: 0
+max_temp: 130
+
+[fan]
+pin: PE5 # FAN0
+
+[heater_fan fan1]
+pin: PE6 # FAN1
+
+#[heater_fan fan2]
+#pin: PC8 # FAN2
+
+[temperature_sensor mcu_temp]
+sensor_type: temperature_mcu
+
+[temperature_sensor k_therm]
+sensor_type: MAX31855
+sensor_pin: PH9
+spi_bus: spi2b
+
+[mcu]
+restart_method: command
+serial: dev/serial0
+# setup for PA9, PA10 USART1_tx / rx directly connected to the RPI GPIO TX / RX pins
+# These are the pins the GTR uses for its built in RPI 40 pin connector
+# only connect GND, TX, RX - supply 5v power to the RPI separately
+# do not cross over TX/RX - it is done internally on the GTR PCB.
+# Use "sudo raspi-config" to disable the serial terminal - but enable the serial port.
+# When running "make menuconfig" you must un-select the USB Serial check box
+
+[printer]
+kinematics: cartesian
+max_velocity: 500
+max_accel: 3000
+max_z_velocity: 12
+max_z_accel: 5
+
+########################################
+# TMC2208 configuration
+########################################
+
+#[tmc2208 stepper_x]
+#uart_pin: PC14
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2208 stepper_y]
+#uart_pin: PE1
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2208 stepper_z]
+#uart_pin: PB5
+#run_current: 0.650
+#stealthchop_threshold: 999999
+
+#[tmc2208 extruder]
+#uart_pin: PG10
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2208 extruder1]
+#uart_pin: PD4
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2208 extruder2]
+#uart_pin: PC12
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+
+########################################
+# TMC2130 configuration
+########################################
+
+#[tmc2130 stepper_x]
+#cs_pin: PC14
+#run_current: 0.800
+#stealthchop_threshold: 0
+#spi_software_mosi_pin: PG15
+#spi_software_miso_pin: PB6
+#spi_software_sclk_pin: PB3
+
+#[tmc2130 stepper_y]
+#cs_pin: PE1
+#sense_resistor: 0.075
+#run_current: 0.800
+#stealthchop_threshold: 0
+#spi_software_mosi_pin: PG15
+#spi_software_miso_pin: PB6
+#spi_software_sclk_pin: PB3
+
+#[tmc2130 stepper_z]
+#cs_pin: PB5
+#sense_resistor: 0.075
+#run_current: 0.650
+#stealthchop_threshold: 0
+#spi_software_mosi_pin: PG15
+#spi_software_miso_pin: PB6
+#spi_software_sclk_pin: PB3
+
+#[tmc2130 extruder]
+#cs_pin: PG10
+#sense_resistor: 0.075
+#run_current: 0.800
+#stealthchop_threshold: 0
+#spi_software_mosi_pin: PG15
+#spi_software_miso_pin: PB6
+#spi_software_sclk_pin: PB3
+
+#[tmc2130 extruder1]
+#cs_pin: PD4
+#sense_resistor: 0.075
+#run_current: 0.800
+#stealthchop_threshold: 0
+#spi_software_mosi_pin: PG15
+#spi_software_miso_pin: PB6
+#spi_software_sclk_pin: PB3
+
+#[tmc2130 extruder2]
+#cs_pin: PC12
+#sense_resistor: 0.075
+#run_current: 0.800
+#stealthchop_threshold: 0
+#spi_software_mosi_pin: PG15
+#spi_software_miso_pin: PB6
+#spi_software_sclk_pin: PB3
+
+########################################
+# TMC5160 configuration
+########################################
+
+#[tmc5160 stepper_x]
+#cs_pin: PC14
+#sense_resistor: 0.075
+#run_current: 1
+#stealthchop_threshold: 0
+#spi_software_mosi_pin: PG15
+#spi_software_miso_pin: PB6
+#spi_software_sclk_pin: PB3
+
+#[tmc5160 stepper_y]
+#cs_pin: PE1
+#sense_resistor: 0.075
+#run_current: 1
+#stealthchop_threshold: 0
+#spi_software_mosi_pin: PG15
+#spi_software_miso_pin: PB6
+#spi_software_sclk_pin: PB3
+
+#[tmc5160 stepper_z]
+#cs_pin: PB5
+#sense_resistor: 0.075
+#run_current: 0.4
+#stealthchop_threshold: 0
+#spi_software_mosi_pin: PG15
+#spi_software_miso_pin: PB6
+#spi_software_sclk_pin: PB3
+
+#[tmc5160 extruder]
+#cs_pin: PG10
+#sense_resistor: 0.075
+#run_current: 0.5
+#stealthchop_threshold: 0
+#spi_software_mosi_pin: PG15
+#spi_software_miso_pin: PB6
+#spi_software_sclk_pin: PB3
+
+#[tmc5160 extruder1]
+#cs_pin: PD4
+#sense_resistor: 0.075
+#run_current: 0.800
+#stealthchop_threshold: 0
+#spi_software_mosi_pin: PG15
+#spi_software_miso_pin: PB6
+#spi_software_sclk_pin: PB3
+
+#[tmc5160 extruder2]
+#cs_pin: PC12
+#sense_resistor: 0.075
+#run_current: 0.800
+#stealthchop_threshold: 0
+#spi_software_mosi_pin: PG15
+#spi_software_miso_pin: PB6
+#spi_software_sclk_pin: PB3
+
+########################################
+# EXP1 / EXP2 (display) pins
+########################################
+
+# display section not tested - pinout should be correct but my LCD did not work yet
+
+[board_pins]
+aliases:
+    # EXP1 header
+    EXP1_1=PC11, EXP1_3=PC10, EXP1_5=PG8, EXP1_7=PG6, EXP1_9=<GND>,
+    EXP1_2=PA15, EXP1_4=PA8, EXP1_6=PG7, EXP1_8=PG5, EXP1_10=<5V>,
+    # EXP2 header
+    EXP2_1=PB14, EXP2_3=PD10, EXP2_5=PH10, EXP2_7=PB10,  EXP2_9=<GND>,
+    EXP2_2=PB13, EXP2_4=PB12, EXP2_6=PB15, EXP2_8=<RST>, EXP2_10=<NC>
+    # not sure on this: Pins EXP2_1, EXP2_6, EXP2_2 are also MISO, MOSI, SCK of bus "spi2"
+
+# See the sample-lcd.cfg file for definitions of common LCD displays.
+
+#[display]
+#lcd_type: st7920
+#cs_pin: EXP1_4
+#sclk_pin: EXP1_5
+#sid_pin: EXP1_3
+#encoder_pins: ^EXP2_5, ^EXP2_3
+#click_pin: ^!EXP1_2
+#kill_pin: ^!EXP2_8
+
+#[output_pin beeper]
+#pin: EXP1_1

config/generic-bigtreetech-manta-e3ez.cfg

@@ -0,0 +1,200 @@
+# This file contains common pin mappings for the BIGTREETECH Manta E3EZ
+# To use this config, the firmware should be compiled for the
+# STM32G0B1 with a "8KiB bootloader" "8 MHz crystal"
+# and "USB (on PA11/PA12)" or "CAN bus (on PB12/PB13)".
+
+# See docs/Config_Reference.md for a description of parameters.
+
+[stepper_x]
+step_pin: PA14
+dir_pin: !PA10
+enable_pin: !PA13
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^PC4
+position_endstop: 0
+position_max: 235
+homing_speed: 50
+
+[stepper_y]
+step_pin: PC8
+dir_pin: !PA15
+enable_pin: !PC14
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^PB0
+position_endstop: 0
+position_max: 235
+homing_speed: 50
+
+[stepper_z]
+step_pin: PD2
+dir_pin: PD4
+enable_pin: !PD3
+microsteps: 16
+rotation_distance: 8
+endstop_pin: ^PC6
+position_endstop: 0
+position_max: 270
+
+[extruder]
+step_pin: PD5
+dir_pin: !PD6
+enable_pin: !PB3
+microsteps: 16
+rotation_distance: 33.500
+nozzle_diameter: 0.400
+filament_diameter: 1.750
+heater_pin: PB11 #HE0
+sensor_type: EPCOS 100K B57560G104F
+sensor_pin: PA4 #TH0
+control: pid
+pid_Kp: 21.527
+pid_Ki: 1.063
+pid_Kd: 108.982
+min_temp: 0
+max_temp: 250
+
+#[filament_switch_sensor material_0]
+#switch_pin: PC5
+
+#[extruder1]
+#step_pin: PB7
+#dir_pin: PB6
+#enable_pin: !PB4
+#heater_pin: PB10 # HE1
+#sensor_pin: PA5 # T1
+
+#[filament_switch_sensor material_1]
+#switch_pin: PB1
+
+[heater_bed]
+heater_pin: PB2 #HB
+sensor_type: EPCOS 100K B57560G104F #Generic 3950
+sensor_pin: PA3 #TB
+control: watermark
+min_temp: 0
+max_temp: 130
+
+[fan]
+pin: PA8
+
+#[heater_fan fan1]
+#pin: PB15
+
+#[heater_fan fan2]
+#pin: PB14
+
+[mcu]
+serial: /dev/serial/by-id/usb-Klipper_Klipper_firmware_12345-if00
+
+[printer]
+kinematics: cartesian
+max_velocity: 300
+max_accel: 3000
+max_z_velocity: 5
+max_z_accel: 100
+
+########################################
+# TMC2209 configuration
+########################################
+
+#[tmc2209 stepper_x]
+#uart_pin: PB8
+##diag_pin: PC4
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2209 stepper_y]
+#uart_pin: PC9
+##diag_pin: PB0
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2209 stepper_z]
+#uart_pin: PD0
+##diag_pin: PC6
+#run_current: 0.650
+#stealthchop_threshold: 999999
+
+#[tmc2209 extruder]
+#uart_pin: PD1
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2209 extruder1]
+#uart_pin: PB5
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+########################################
+# TMC2130 configuration
+########################################
+
+#[tmc2130 stepper_x]
+#cs_pin: PB8
+#spi_software_miso_pin: PC11
+#spi_software_mosi_pin: PC12
+#spi_software_sclk_pin: PC10
+##diag1_pin: PF3
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2130 stepper_y]
+#cs_pin: PC9
+#spi_software_miso_pin: PC11
+#spi_software_mosi_pin: PC12
+#spi_software_sclk_pin: PC10
+##diag1_pin: PF4
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2130 stepper_z]
+#cs_pin: PD0
+#spi_software_miso_pin: PC11
+#spi_software_mosi_pin: PC12
+#spi_software_sclk_pin: PC10
+##diag1_pin: PF5
+#run_current: 0.650
+#stealthchop_threshold: 999999
+
+#[tmc2130 extruder]
+#cs_pin: PD1
+#spi_software_miso_pin: PC11
+#spi_software_mosi_pin: PC12
+#spi_software_sclk_pin: PC10
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2130 extruder1]
+#cs_pin: PB5
+#spi_software_miso_pin: PC11
+#spi_software_mosi_pin: PC12
+#spi_software_sclk_pin: PC10
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+[board_pins]
+aliases:
+    # EXP1 header
+    EXP1_1=PC1, EXP1_3=PC3, EXP1_5=PC0, EXP1_7=PA2, EXP1_9=<GND>,
+    EXP1_2=PC2,  EXP1_4=<RST>, EXP1_6=PA0, EXP1_8=PA1, EXP1_10=<5V>
+
+#[bltouch]
+#sensor_pin: PA6
+#control_pin: PA7
+
+#[output_pin PS_ON]
+#pin: PA9
+
+#[output_pin pb9_pin]
+#pin: PB9
+
+#[neopixel my_neopixel]
+#pin: PC7
+
+#[adxl345]
+#cs_pin: PC15
+#spi_software_miso_pin: PC11
+#spi_software_mosi_pin: PC12
+#spi_software_sclk_pin: PC10

config/generic-bigtreetech-manta-m4p.cfg

@@ -0,0 +1,175 @@
+# This file contains common pin mappings for the BIGTREETECH Manta M4P
+# To use this config, the firmware should be compiled for the
+# STM32G0B1 with a "8KiB bootloader" and USB communication.
+
+# See docs/Config_Reference.md for a description of parameters.
+
+[stepper_x]
+step_pin: PC6
+dir_pin: PA14
+enable_pin: !PC7
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^PC0
+position_endstop: 0
+position_max: 235
+homing_speed: 50
+
+[stepper_y]
+step_pin: PB10
+dir_pin: !PB2
+enable_pin: !PB11
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^PC1
+position_endstop: 0
+position_max: 235
+homing_speed: 50
+
+[stepper_z]
+step_pin: PB0
+dir_pin: !PC5
+enable_pin: !PB1
+microsteps: 16
+rotation_distance: 8
+endstop_pin: ^PC2
+position_endstop: 0
+position_max: 270
+
+[extruder]
+step_pin: PB3
+dir_pin: PB4
+enable_pin: !PD5
+microsteps: 16
+rotation_distance: 33.500
+nozzle_diameter: 0.400
+filament_diameter: 1.750
+heater_pin: PC8
+sensor_type: EPCOS 100K B57560G104F
+sensor_pin: PA0
+control: pid
+pid_Kp: 22.2
+pid_Ki: 1.08
+pid_Kd: 114
+min_temp: 0
+max_temp: 250
+
+#[filament_switch_sensor filament_sensor]
+#switch_pin: ^!PC15
+
+[heater_bed]
+heater_pin: PD8
+sensor_type: Generic 3950
+sensor_pin: PC4
+control: watermark
+min_temp: 0
+max_temp: 130
+
+[fan]
+pin: PD2
+
+#[heater_fan fan1]
+#pin: PD3
+
+#[heater_fan fan2]
+#pin: PD4
+
+#[heater_fan SoC_fan]
+#pin: CB1:gpio79
+#pin: RPI:gpio26
+
+[mcu]
+serial: /dev/serial/by-id/usb-Klipper_Klipper_firmware_12345-if00
+
+[printer]
+kinematics: cartesian
+max_velocity: 180
+max_accel: 3000
+max_z_velocity: 5
+max_z_accel: 100
+
+########################################
+# EXP1 / EXP2 (display) pins
+########################################
+
+[board_pins]
+aliases:
+    # EXP1 header
+    EXP1_1=PD6,  EXP1_3=PB9,  EXP1_5=PA15, EXP1_7=PA9,   EXP1_9=<GND>,
+    EXP1_2=PB8,  EXP1_4=PC3,  EXP1_6=PA10, EXP1_8=PB5,   EXP1_10=<5V>,
+    # EXP2 header
+    EXP2_1=PB14, EXP2_3=PC11, EXP2_5=PC12, EXP2_7=PC13,  EXP2_9=<GND>,
+    EXP2_2=PB13, EXP2_4=PA8,  EXP2_6=PB15, EXP2_8=<RST>, EXP2_10=<NC>
+
+# See the sample-lcd.cfg file for definitions of common LCD displays.
+
+########################################
+# TMC2209 configuration
+########################################
+
+#[tmc2209 stepper_x]
+#uart_pin: PB12
+#run_current: 0.800
+#diag_pin:
+
+#[tmc2209 stepper_y]
+#uart_pin: PC10
+#run_current: 0.800
+#diag_pin:
+
+#[tmc2209 stepper_z]
+#uart_pin: PC9
+#run_current: 0.800
+#diag_pin:
+
+#[tmc2209 extruder]
+#uart_pin: PA13
+#run_current: 0.600
+#diag_pin:
+
+########################################
+# TMC5160 configuration
+########################################
+
+#[[tmc2130 stepper_x]
+#cs_pin: PB12
+#spi_bus: spi1
+#diag1_pin: PG6
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2130 stepper_y]
+#cs_pin: PC10
+#spi_bus: spi1
+#diag1_pin: PG9
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2130 stepper_z]
+#cs_pin: PC9
+#spi_bus: spi1
+#diag1_pin: PG10
+#run_current: 0.650
+#stealthchop_threshold: 999999
+
+#[tmc2130 extruder]
+#cs_pin: PA13
+#spi_bus: spi1
+#diag1_pin: PC15
+#run_current: 0.650
+#stealthchop_threshold: 999999
+
+#[bltouch]
+#sensor_pin: PC14
+#control_pin: PA1
+
+#[adxl345]
+#cs_pin: PD9
+#spi_bus: spi1
+#axes_map: z,y,-x
+
+#[neopixel rgb1]
+#pin: PD0
+
+#[neopixel rgb2]
+#pin: PD1

config/generic-bigtreetech-manta-m5p.cfg

@@ -0,0 +1,199 @@
+# This file contains common pin mappings for the BIGTREETECH Manta M5P
+# To use this config, the firmware should be compiled for the
+# STM32G0B1 with a "8KiB bootloader" "8 MHz crystal"
+# and "USB (on PA11/PA12)" or "CAN bus (on PD0/PD1)".
+
+# See docs/Config_Reference.md for a description of parameters.
+
+[stepper_x]
+step_pin: PC8
+dir_pin: !PC9
+enable_pin: !PA15
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^PD3
+position_endstop: 0
+position_max: 200
+homing_speed: 50
+
+[stepper_y]
+step_pin: PA10
+dir_pin: !PA14
+enable_pin: !PA13
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^PD2
+position_endstop: 0
+position_max: 200
+homing_speed: 50
+
+[stepper_z]
+step_pin: PC6
+dir_pin: PC7
+enable_pin: !PA9
+microsteps: 16
+rotation_distance: 8
+endstop_pin: ^PC3
+position_endstop: 0.0
+position_max: 200
+
+[extruder]
+step_pin: PB12
+dir_pin: !PB11
+enable_pin: !PA8
+microsteps: 16
+rotation_distance: 33.500
+nozzle_diameter: 0.400
+filament_diameter: 1.750
+heater_pin: PC5
+sensor_type: EPCOS 100K B57560G104F
+sensor_pin: PA1
+control: pid
+pid_Kp: 21.527
+pid_Ki: 1.063
+pid_Kd: 108.982
+min_temp: 0
+max_temp: 250
+
+#sensor_type:MAX31865
+#sensor_pin: PA4
+#spi_bus: spi1
+#rtd_nominal_r: 100
+#rtd_reference_r: 430
+#rtd_num_of_wires: 2
+
+#[filament_switch_sensor material_0]
+#switch_pin: PC2
+
+#[extruder1]
+#step_pin: PB0
+#dir_pin: PB1
+#enable_pin: !PC4
+#heater_pin: PA7
+#sensor_pin: PA2
+#...
+
+[heater_bed]
+heater_pin: PA5
+sensor_type: Generic 3950
+sensor_pin: PA0
+control: watermark
+min_temp: 0
+max_temp: 130
+
+[fan]
+pin: PA4
+
+#[heater_fan fan1]
+#pin: PA3
+
+#[heater_fan SoC_fan]
+#pin: CB1:gpio79
+#pin: RPI:gpio26
+
+[mcu]
+serial: /dev/serial/by-id/usb-Klipper_Klipper_firmware_12345-if00
+
+[printer]
+kinematics: cartesian
+max_velocity: 300
+max_accel: 3000
+max_z_velocity: 5
+max_z_accel: 100
+
+########################################
+# TMC2209 configuration
+########################################
+
+#[tmc2209 stepper_x]
+#uart_pin: PD9
+#run_current: 0.800
+#diag_pin: PD3
+
+#[tmc2209 stepper_y]
+#uart_pin: PD8
+#run_current: 0.800
+#diag_pin: PD2
+
+#[tmc2209 stepper_z]
+#uart_pin: PB10
+#run_current: 0.800
+#diag_pin: PC3
+
+#[tmc2209 extruder]
+#uart_pin: PB2
+#run_current: 0.600
+#diag_pin: PC2
+
+#[tmc2209 extruder1]
+#uart_pin: PA6
+#run_current: 0.600
+#diag_pin:
+
+########################################
+# TMC2130 configuration
+########################################
+
+#[tmc2130 stepper_x]
+#cs_pin: PD9
+#spi_bus: spi2
+#run_current: 0.800
+#stealthchop_threshold: 999999
+#diag1_pin: PD3
+
+#[tmc2130 stepper_y]
+#cs_pin: PD8
+#spi_bus: spi2
+#run_current: 0.800
+#stealthchop_threshold: 999999
+#diag1_pin: PD2
+
+#[tmc2130 stepper_z]
+#cs_pin: PB10
+#spi_bus: spi2
+#run_current: 0.650
+#stealthchop_threshold: 999999
+#diag1_pin: PC3
+
+#[tmc2130 extruder]
+#cs_pin: PB2
+#spi_bus: spi2
+#run_current: 0.800
+#stealthchop_threshold: 999999
+#diag1_pin: PC2
+
+#[tmc2130 extruder1]
+#cs_pin: PA6
+#spi_bus: spi2
+#run_current: 0.800
+#stealthchop_threshold: 999999
+#diag1_pin:
+
+[board_pins]
+aliases:
+    # EXP1 header
+    EXP1_1=PD5, EXP1_3=PB3, EXP1_5=PB5, EXP1_7=PB7, EXP1_9=<GND>,
+    EXP1_2=PD4,  EXP1_4=PD6, EXP1_6=PB4, EXP1_8=PB6, EXP1_10=<5V>,
+    # EXP2 header
+    EXP2_1=PB14, EXP2_3=PB8, EXP2_5=PC10, EXP2_7=PC12,  EXP2_9=<GND>,
+    EXP2_2=PB13, EXP2_4=PB9, EXP2_6=PB15, EXP2_8=<RST>, EXP2_10=<NC>
+
+# See the sample-lcd.cfg file for definitions of common LCD displays.
+
+#[bltouch]
+#sensor_pin: PC13
+#control_pin: PC15
+
+# Proximity switch
+#[probe]
+#pin: PC15
+
+#[neopixel my_neopixel1]
+#pin: PC11
+
+#[neopixel my_neopixel2]
+#pin: PC14
+
+#[adxl345]
+#cs_pin: PC0
+#spi_bus: spi2

config/generic-bigtreetech-manta-m8p-v1.0.cfg

@@ -0,0 +1,288 @@
+# This file contains common pin mappings for the BIGTREETECH Manta M8P
+# To use this config, the firmware should be compiled for the
+# STM32G0B1 with a "8KiB bootloader" and USB communication.
+
+# See docs/Config_Reference.md for a description of parameters.
+
+[stepper_x]
+step_pin: PE2
+dir_pin: PB4
+enable_pin: !PC11
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^PF3
+position_endstop: 0
+position_max: 235
+homing_speed: 50
+
+[stepper_y]
+step_pin: PF12
+dir_pin: PF11
+enable_pin: !PB3
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^PF4
+position_endstop: 0
+position_max: 235
+homing_speed: 50
+
+[stepper_z]
+step_pin: PD7
+dir_pin: !PD6
+enable_pin: !PF10
+microsteps: 16
+rotation_distance: 8
+endstop_pin: ^PF5
+position_endstop: 0
+position_max: 270
+
+# Motor4
+# The M8P only has 4 heater outputs which leaves an extra stepper
+# This can be used for a second Z stepper, dual_carriage, extruder co-stepper,
+# or other accesory such as an MMU
+#[stepper_]
+#step_pin: PD3
+#dir_pin: PD2
+#enable_pin: !PD5
+#endstop_pin: PC0
+#...
+
+[extruder]
+step_pin: PC9
+dir_pin: PC8
+enable_pin: !PD1
+microsteps: 16
+rotation_distance: 33.500
+nozzle_diameter: 0.4
+filament_diameter: 1.75
+heater_pin: PE3 # HE0
+sensor_type: EPCOS 100K B57560G104F
+sensor_pin: PA1 # T0
+control: pid
+pid_Kp: 22.2
+pid_Ki: 1.08
+pid_Kd: 114
+min_temp: 0
+max_temp: 250
+
+#[filament_switch_sensor material_0]
+#switch_pin: PC1
+
+# Motor6
+#[extruder1]
+#step_pin: PA10
+#dir_pin: PD15
+#enable_pin: !PA15
+#heater_pin: PB5 # HE1
+#sensor_pin: PA2 # T1
+#...
+
+#[filament_switch_sensor material_1]
+#switch_pin: PC2
+
+# Motor7
+#[extruder2]
+#step_pin: PD12
+#dir_pin: PD11
+#enable_pin: !PD14
+#heater_pin: PB6 # HE2
+#sensor_pin: PA3 # T2
+#...
+
+# Motor8
+#[extruder3]
+#step_pin: PD10
+#dir_pin: PD8
+#enable_pin: !PD9
+#heater_pin: PE1 # HE3
+#sensor_pin: PA4 # T3
+#...
+
+[heater_bed]
+heater_pin: PB7
+sensor_type: Generic 3950
+sensor_pin: PA0 # TB
+control: watermark
+min_temp: 0
+max_temp: 130
+
+[fan]
+pin: PE6
+
+#[heater_fan fan1]
+#pin: PE0
+
+#[heater_fan fan2]
+#pin: PC12
+
+#[heater_fan fan3]
+#pin: PE5
+
+#[heater_fan fan4]
+#pin: PE4
+#tachometer_pin: PC13
+
+#[heater_fan fan5]
+#pin: PB8
+#tachometer_pin: PC14
+
+#[heater_fan fan6]
+#pin: PB9
+#tachometer_pin: PC15
+
+[mcu]
+serial: /dev/serial/by-id/usb-Klipper_Klipper_firmware_12345-if00
+
+[printer]
+kinematics: cartesian
+max_velocity: 300
+max_accel: 3000
+max_z_velocity: 5
+max_z_accel: 100
+
+########################################
+# TMC2209 configuration
+########################################
+
+#[tmc2209 stepper_x]
+#uart_pin: PC10
+##diag_pin: PF3
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2209 stepper_y]
+#uart_pin: PF13
+##diag_pin: PF4
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2209 stepper_z]
+#uart_pin: PF9
+##diag_pin: PF5
+#run_current: 0.650
+#stealthchop_threshold: 999999
+
+#[tmc2209 stepper_]
+#uart_pin: PD4
+##diag_pin: PC0
+#run_current: 0.650
+#stealthchop_threshold: 999999
+
+#[tmc2209 extruder]
+#uart_pin: PD0
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2209 extruder1]
+#uart_pin: PF8
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2209 extruder2]
+#uart_pin: PD13
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2209 extruder3]
+#uart_pin: PC7
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+########################################
+# TMC2130 configuration
+########################################
+
+#[tmc2130 stepper_x]
+#cs_pin: PC10
+#spi_bus: spi1
+##diag1_pin: PF3
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2130 stepper_y]
+#cs_pin: PF13
+#spi_bus: spi1
+##diag1_pin: PF4
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2130 stepper_z]
+#cs_pin: PF9
+#spi_bus: spi1
+##diag1_pin: PF5
+#run_current: 0.650
+#stealthchop_threshold: 999999
+
+#[tmc2130 stepper_]
+#cs_pin: PD4
+#spi_bus: spi1
+##diag1_pin: PC0
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2130 extruder]
+#cs_pin: PD0
+#spi_bus: spi1
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2130 extruder1]
+#cs_pin: PF8
+#spi_bus: spi1
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2130 extruder2]
+#cs_pin: PD13
+#spi_bus: spi1
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2130 extruder3]
+#cs_pin: PC7
+#spi_bus: spi1
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+[board_pins]
+aliases:
+    # EXP1 header
+    EXP1_1=PE9, EXP1_2=PE10,
+    EXP1_3=PE11, EXP1_4=PE12,
+    EXP1_5=PE13, EXP1_6=PE14,    # Slot in the socket on this side
+    EXP1_7=PE15, EXP1_8=PB10,
+    EXP1_9=<GND>, EXP1_10=<5V>,
+
+    # EXP2 header
+    EXP2_1=PB14, EXP2_2=PB13,
+    EXP2_3=PF7, EXP2_4=PB12,
+    EXP2_5=PE7, EXP2_6=PB11,      # Slot in the socket on this side
+    EXP2_7=PE8, EXP2_8=<RST>,
+    EXP2_9=<GND>, EXP2_10=<NC>
+
+# See the sample-lcd.cfg file for definitions of common LCD displays.
+
+#[bltouch]
+#sensor_pin: PB2
+#control_pin: PB1
+
+# Proximity switch
+#[probe]
+#pin: PF6
+
+#[output_pin ps_on_pin]
+#pin: PC3
+
+#[neopixel my_neopixel_1]
+#pin: PC6
+
+#[neopixel my_neopixel_2]
+#pin: PA9
+
+#[hall_filament_width_sensor]
+#adc1: PC5
+#adc2: PB0
+
+#[adxl345]
+#cs_pin: PB15
+#spi_bus: spi1

config/generic-bigtreetech-manta-m8p-v1.1.cfg

@@ -0,0 +1,295 @@
+# This file contains common pin mappings for the BIGTREETECH Manta M8P
+# To use this config, the firmware should be compiled for the
+# STM32G0B1 with a "8KiB bootloader" "8 MHz crystal"
+# and "USB (on PA11/PA12)" or "CAN bus (on PD12/PD13)".
+
+# See docs/Config_Reference.md for a description of parameters.
+
+[stepper_x]
+step_pin: PE2
+dir_pin: PB4
+enable_pin: !PC11
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^PF3
+position_endstop: 0
+position_max: 235
+homing_speed: 50
+
+[stepper_y]
+step_pin: PF12
+dir_pin: PF11
+enable_pin: !PB3
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^PF4
+position_endstop: 0
+position_max: 235
+homing_speed: 50
+
+[stepper_z]
+step_pin: PD7
+dir_pin: !PD6
+enable_pin: !PF10
+microsteps: 16
+rotation_distance: 8
+endstop_pin: ^PF5
+position_endstop: 0
+position_max: 270
+
+# Motor4
+# The M8P only has 4 heater outputs which leaves an extra stepper
+# This can be used for a second Z stepper, dual_carriage, extruder co-stepper,
+# or other accesory such as an MMU
+#[stepper_]
+#step_pin: PD3
+#dir_pin: PD2
+#enable_pin: !PD5
+#endstop_pin: PC0
+#...
+
+[extruder]
+step_pin: PC9
+dir_pin: PC8
+enable_pin: !PD1
+microsteps: 16
+rotation_distance: 33.500
+nozzle_diameter: 0.4
+filament_diameter: 1.75
+heater_pin: PE3 # HE0
+sensor_type: EPCOS 100K B57560G104F
+sensor_pin: PA1 # T0
+control: pid
+pid_Kp: 22.2
+pid_Ki: 1.08
+pid_Kd: 114
+min_temp: 0
+max_temp: 250
+
+#[filament_switch_sensor material_0]
+#switch_pin: PC1
+
+# Motor6
+#[extruder1]
+#step_pin: PA10
+#dir_pin: PA14
+#enable_pin: !PA15
+#heater_pin: PB5 # HE1
+#sensor_pin: PA2 # T1
+#...
+
+#[filament_switch_sensor material_1]
+#switch_pin: PC2
+
+# Motor7
+#[extruder2]
+#step_pin: PD11
+#dir_pin: PD9
+#enable_pin: !PD15
+#heater_pin: PB6 # HE2
+#sensor_pin: PA3 # T2
+#...
+
+# Motor8
+#[extruder3]
+#step_pin: PD8
+#dir_pin: PC6
+#enable_pin: !PC7
+#heater_pin: PE1 # HE3
+#sensor_pin: PA4 # T3
+#...
+
+[heater_bed]
+heater_pin: PB7
+sensor_type: Generic 3950
+sensor_pin: PA0 # TB
+control: watermark
+min_temp: 0
+max_temp: 130
+
+[fan]
+pin: PE6
+
+#[heater_fan fan1]
+#pin: PE0
+
+#[heater_fan fan2]
+#pin: PC12
+
+#[heater_fan fan3]
+#pin: PE5
+
+#[heater_fan fan4]
+#pin: PE4
+
+#[heater_fan fan5]
+#pin: PB8
+#tachometer_pin: PC14
+
+#[heater_fan fan6]
+#pin: PB9
+#tachometer_pin: PC15
+
+#[heater_fan SoC_fan]
+#pin: CB1:gpio79
+#pin: RPI:gpio26
+
+[mcu]
+serial: /dev/serial/by-id/usb-Klipper_Klipper_firmware_12345-if00
+
+[printer]
+kinematics: cartesian
+max_velocity: 300
+max_accel: 3000
+max_z_velocity: 5
+max_z_accel: 100
+
+########################################
+# TMC2209 configuration
+########################################
+
+#[tmc2209 stepper_x]
+#uart_pin: PC10
+##diag_pin: PF3
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2209 stepper_y]
+#uart_pin: PF13
+##diag_pin: PF4
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2209 stepper_z]
+#uart_pin: PF9
+##diag_pin: PF5
+#run_current: 0.650
+#stealthchop_threshold: 999999
+
+#[tmc2209 stepper_]
+#uart_pin: PD4
+##diag_pin: PC0
+#run_current: 0.650
+#stealthchop_threshold: 999999
+
+#[tmc2209 extruder]
+#uart_pin: PD0
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2209 extruder1]
+#uart_pin: PF8
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2209 extruder2]
+#uart_pin: PD14
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2209 extruder3]
+#uart_pin: PD10
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+########################################
+# TMC2130 configuration
+########################################
+
+#[tmc2130 stepper_x]
+#cs_pin: PC10
+#spi_bus: spi1
+##diag1_pin: PF3
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2130 stepper_y]
+#cs_pin: PF13
+#spi_bus: spi1
+##diag1_pin: PF4
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2130 stepper_z]
+#cs_pin: PF9
+#spi_bus: spi1
+##diag1_pin: PF5
+#run_current: 0.650
+#stealthchop_threshold: 999999
+
+#[tmc2130 stepper_]
+#cs_pin: PD4
+#spi_bus: spi1
+##diag1_pin: PC0
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2130 extruder]
+#cs_pin: PD0
+#spi_bus: spi1
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2130 extruder1]
+#cs_pin: PF8
+#spi_bus: spi1
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2130 extruder2]
+#cs_pin: PD14
+#spi_bus: spi1
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2130 extruder3]
+#cs_pin: PD10
+#spi_bus: spi1
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+[board_pins]
+aliases:
+    # EXP1 header
+    EXP1_1=PE9, EXP1_2=PE10,
+    EXP1_3=PE11, EXP1_4=PE12,
+    EXP1_5=PE13, EXP1_6=PE14,    # Slot in the socket on this side
+    EXP1_7=PE15, EXP1_8=PB10,
+    EXP1_9=<GND>, EXP1_10=<5V>,
+
+    # EXP2 header
+    EXP2_1=PB14, EXP2_2=PB13,
+    EXP2_3=PF7, EXP2_4=PB12,
+    EXP2_5=PE7, EXP2_6=PB11,      # Slot in the socket on this side
+    EXP2_7=PE8, EXP2_8=<RST>,
+    EXP2_9=<GND>, EXP2_10=<NC>
+
+# See the sample-lcd.cfg file for definitions of common LCD displays.
+
+#[bltouch]
+#sensor_pin: PB2
+#control_pin: PB1
+
+# Proximity switch
+#[probe]
+#pin: PF6
+
+#[output_pin ps_on_pin]
+#pin: PC3
+
+#[output_pin pc13_pin]
+#pin: PC13
+
+#[neopixel my_neopixel_1]
+#pin: PA9
+
+#[neopixel my_neopixel_2]
+#pin: PB15
+
+#[hall_filament_width_sensor]
+#adc1: PC5
+#adc2: PB0
+
+#[adxl345]
+#cs_pin: PC4
+#spi_bus: spi1

config/generic-bigtreetech-octopus-max-ez.cfg

@@ -0,0 +1,332 @@
+# This file contains common pin mappings for the BIGTREETECH Octopus Max EZ.
+# To use this config, the firmware should be compiled for the
+# STM32H723 with a "128KiB bootloader" "25 MHz crystal"
+# and "USB (on PA11/PA12)" or "CAN bus (on PD0/PD1)".
+
+# See docs/Config_Reference.md for a description of parameters.
+
+# Motor-1
+[stepper_x]
+step_pin: PC13
+dir_pin: PC14
+enable_pin: !PE6
+microsteps: 16
+rotation_distance: 40
+endstop_pin: PF0
+position_endstop: 0
+position_max: 200
+homing_speed: 50
+
+# Motor-2
+[stepper_y]
+step_pin: PE4
+dir_pin: PE5
+enable_pin: !PE3
+microsteps: 16
+rotation_distance: 40
+endstop_pin: PF2
+position_endstop: 0
+position_max: 200
+homing_speed: 50
+
+# Motor-3
+[stepper_z]
+step_pin: PE1
+dir_pin: PE0
+enable_pin: !PE2
+microsteps: 16
+rotation_distance: 8
+endstop_pin: PF4
+position_endstop: 0.5
+position_max: 200
+
+# Motor-4
+# The Octopus only has 4 heater outputs which leaves an extra stepper
+# This can be used for a second Z stepper, dual_carriage, extruder co-stepper,
+# or other accesory such as an MMU
+#[stepper_]
+#step_pin: PB8
+#dir_pin: PB9
+#enable_pin: PB7
+#endstop_pin: PF3
+#...
+
+# Motor-5
+[extruder]
+step_pin: PB5
+dir_pin: PB4
+enable_pin: !PB6
+microsteps: 16
+rotation_distance: 33.500
+nozzle_diameter: 0.400
+filament_diameter: 1.750
+heater_pin: PF6 # HE0
+sensor_pin:  PB0 # T0
+sensor_type: EPCOS 100K B57560G104F
+control: pid
+pid_Kp: 22.2
+pid_Ki: 1.08
+pid_Kd: 114
+min_temp: 0
+max_temp: 250
+
+#[filament_switch_sensor material_0]
+#switch_pin: PF1
+
+# Motor-6
+#[extruder1]
+#step_pin: PG15
+#dir_pin: PB3
+#enable_pin: !PD5
+#heater_pin: PA0 # HE1
+#sensor_pin: PC5 # T1
+#...
+
+#[filament_switch_sensor material_1]
+#switch_pin: PC15
+
+# Motor-7
+#[extruder2]
+#step_pin: PD3
+#dir_pin: PD2
+#enable_pin: !PD4
+#heater_pin: PF9 # HE2
+#sensor_pin: PC4 # T2
+#...
+
+# Motor-8
+#[extruder3]
+#step_pin: PA10
+#dir_pin: PA9
+#enable_pin: !PA15
+#heater_pin: PF7 # HE3
+#sensor_pin: PA7 # T3
+#...
+
+# Motor-9
+#[extruder4]
+#step_pin: PA8
+#dir_pin: PC7
+#enable_pin: !PC9
+#...
+
+# Motor-10
+#[extruder5]
+#step_pin: PG6
+#dir_pin: PC6
+#enable_pin: !PC8
+#...
+
+[heater_bed]
+heater_pin: PF5
+sensor_pin: PB1 # TB
+sensor_type: ATC Semitec 104GT-2
+control: watermark
+min_temp: 0
+max_temp: 130
+
+[fan]
+pin: PA6
+
+#[heater_fan fan1]
+#pin: PA5
+
+#[heater_fan fan2]
+#pin: PA4
+
+#[heater_fan fan3]
+#pin: PA3
+
+#[heater_fan fan4]
+#pin: PA1
+#tachometer_pin: PC3
+
+#[heater_fan fan5]
+#pin: PF8
+#tachometer_pin: PC1
+
+#[heater_fan fan6]
+#pin: PA2
+#tachometer_pin: PC2
+
+[mcu]
+serial: /dev/serial/by-id/usb-Klipper_Klipper_firmware_12345-if00
+
+[printer]
+kinematics: cartesian
+max_velocity: 300
+max_accel: 3000
+max_z_velocity: 5
+max_z_accel: 100
+
+########################################
+# TMC2209 configuration
+########################################
+
+#[tmc2209 stepper_x]
+#uart_pin: PG14
+##diag_pin: PF0
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2209 stepper_y]
+#uart_pin: PG13
+##diag_pin: PF2
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2209 stepper_z]
+#uart_pin: PG12
+##diag_pin: PF4
+#run_current: 0.650
+#stealthchop_threshold: 999999
+
+#[tmc2209 stepper_]
+#uart_pin: PG11
+##diag_pin: PF3
+#run_current: 0.650
+#stealthchop_threshold: 999999
+
+#[tmc2209 extruder]
+#uart_pin: PG10
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2209 extruder1]
+#uart_pin: PG9
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2209 extruder2]
+#uart_pin: PD7
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2209 extruder3]
+#uart_pin: PD6
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2209 extruder4]
+#uart_pin: PG8
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2209 extruder5]
+#uart_pin: PG7
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+########################################
+# TMC2130 configuration
+########################################
+
+#[tmc2130 stepper_x]
+#cs_pin: PG14
+#spi_bus: spi4
+##diag1_pin: PF0
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2130 stepper_y]
+#cs_pin: PG13
+#spi_bus: spi4
+##diag1_pin: PF2
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2130 stepper_z]
+#cs_pin: PG12
+#spi_bus: spi4
+##diag1_pin: PF4
+#run_current: 0.650
+#stealthchop_threshold: 999999
+
+#[tmc2130 stepper_]
+#cs_pin: PG11
+#spi_bus: spi4
+##diag1_pin: PF3
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2130 extruder]
+#cs_pin: PG10
+#spi_bus: spi4
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2130 extruder1]
+#cs_pin: PG9
+#spi_bus: spi4
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2130 extruder2]
+#cs_pin: PD7
+#spi_bus: spi4
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2130 extruder3]
+#cs_pin: PD6
+#spi_bus: spi4
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2130 extruder4]
+#cs_pin: PG8
+#spi_bus: spi4
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2130 extruder5]
+#cs_pin: PG7
+#spi_bus: spi4
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+[board_pins]
+aliases:
+    # FPC header, Aliases EXP1 & EXP2 for mini12864
+    EXP1_1=PG2, EXP1_2=PD15,
+    EXP1_3=PD14, EXP1_4=PD13,
+    EXP1_5=PD12, EXP1_6=PD11,
+    EXP1_7=PD10, EXP1_8=PE15,
+    EXP1_9=<GND>, EXP1_10=<5V>,
+
+    # EXP2 header
+    EXP2_1=PE13, EXP2_2=PE12,
+    EXP2_3=PG5, EXP2_4=PE11,
+    EXP2_5=PG4, EXP2_6=PE14,
+    EXP2_7=PG3, EXP2_8=<RST>,
+    EXP2_9=<GND>, EXP2_10=<NC>
+
+# See the sample-lcd.cfg file for definitions of common LCD displays.
+
+#[bltouch]
+#sensor_pin: ^PB15
+#control_pin: PB14
+
+# Proximity switch
+#[probe]
+#pin: PF11
+
+#[output_pin ps_on_pin]
+#pin: PF13
+
+#[output_pin pf12_pin]
+#pin: PF12
+
+#[neopixel my_neopixel_1]
+#pin: PE10
+
+#[neopixel my_neopixel_2]
+#pin: PE9
+
+#[hall_filament_width_sensor]
+#adc1: PC0
+#adc2: PF10
+
+#[adxl345]
+#cs_pin: PF14
+#spi_bus: spi4

config/generic-bigtreetech-octopus-pro-v1.0.cfg

@@ -0,0 +1,289 @@
+# This file contains common pin mappings for the BigTreeTech Octopus
+# Pro v1.0 board.
+
+# Important! Do not use this config with an Octopus Pro v1.1 board as
+# doing so could result in a heater being inadvertently enabled.
+
+# To use this config, start by identifying the micro-controller on the
+# board - it may be an STM32F446, STM32F429, or an STM32H723.  Select
+# the appropriate micro-controller in "make menuconfig" and select
+# "Enable low-level configuration options". For STM32F446 boards the
+# firmware should be compiled with a "32KiB bootloader" and a "12MHz
+# crystal" clock reference. For STM32F429 boards use a "32KiB
+# bootloader" and an "8MHz crystal". For STM32H723 boards use a
+# "128KiB bootloader" and a "25Mhz crystal".
+
+# See docs/Config_Reference.md for a description of parameters.
+
+# Driver0
+[stepper_x]
+step_pin: PF13
+dir_pin: PF12
+enable_pin: !PF14
+microsteps: 16
+rotation_distance: 40
+endstop_pin: PG6
+position_endstop: 0
+position_max: 200
+homing_speed: 50
+
+# Driver1
+[stepper_y]
+step_pin: PG0
+dir_pin: PG1
+enable_pin: !PF15
+microsteps: 16
+rotation_distance: 40
+endstop_pin: PG9
+position_endstop: 0
+position_max: 200
+homing_speed: 50
+
+# Driver2
+[stepper_z]
+step_pin: PF11
+dir_pin: PG3
+enable_pin: !PG5
+microsteps: 16
+rotation_distance: 8
+endstop_pin: PG10
+position_endstop: 0.5
+position_max: 200
+
+# Driver3
+# The Octopus only has 4 heater outputs which leaves an extra stepper
+# This can be used for a second Z stepper, dual_carriage, extruder co-stepper,
+# or other accesory such as an MMU
+#[stepper_]
+#step_pin: PG4
+#dir_pin: PC1
+#enable_pin: !PA0
+#endstop_pin: PG11
+#...
+
+# Driver4
+[extruder]
+step_pin: PF9
+dir_pin: PF10
+enable_pin: !PG2
+microsteps: 16
+rotation_distance: 33.500
+nozzle_diameter: 0.400
+filament_diameter: 1.750
+heater_pin: PA2 # HE0
+sensor_pin:  PF4 # T0
+sensor_type: EPCOS 100K B57560G104F
+control: pid
+pid_Kp: 22.2
+pid_Ki: 1.08
+pid_Kd: 114
+min_temp: 0
+max_temp: 250
+
+#[filament_switch_sensor material_0]
+#switch_pin: PG12
+
+# Driver5
+#[extruder1]
+#step_pin: PC13
+#dir_pin: PF0
+#enable_pin: !PF1
+#heater_pin: PA3 # HE1
+#sensor_pin: PF5 # T1
+#...
+
+#[filament_switch_sensor material_1]
+#switch_pin: PG13
+
+# Driver6
+#[extruder2]
+#step_pin: PE2
+#dir_pin: PE3
+#enable_pin: !PD4
+#heater_pin: PB10 # HE2
+#sensor_pin: PF6 # T2
+#...
+
+#[filament_switch_sensor material_2]
+#switch_pin: PG14
+
+# Driver7
+#[extruder3]
+#step_pin: PE6
+#dir_pin: PA14
+#enable_pin: !PE0
+#heater_pin: PB11 # HE3
+#sensor_pin: PF7 # T3
+#...
+
+#[filament_switch_sensor material_3]
+#switch_pin: PG15
+
+[heater_bed]
+heater_pin: PA1
+sensor_pin: PF3 # TB
+sensor_type: ATC Semitec 104GT-2
+control: watermark
+min_temp: 0
+max_temp: 130
+
+[fan]
+pin: PA8
+
+#[heater_fan fan1]
+#pin: PE5
+
+#[heater_fan fan2]
+#pin: PD12
+
+#[heater_fan fan3]
+#pin: PD13
+
+#[heater_fan fan4]
+#pin: PD14
+
+#[controller_fan fan5]
+#pin: PD15
+
+[mcu]
+serial: /dev/serial/by-id/usb-Klipper_Klipper_firmware_12345-if00
+# CAN bus is also available on this board
+
+[printer]
+kinematics: cartesian
+max_velocity: 300
+max_accel: 3000
+max_z_velocity: 5
+max_z_accel: 100
+
+########################################
+# TMC2209 configuration
+########################################
+
+#[tmc2209 stepper_x]
+#uart_pin: PC4
+##diag_pin: PG6
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2209 stepper_y]
+#uart_pin: PD11
+##diag_pin: PG9
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2209 stepper_z]
+#uart_pin: PC6
+##diag_pin: PG10
+#run_current: 0.650
+#stealthchop_threshold: 999999
+
+#[tmc2209 stepper_]
+#uart_pin: PC7
+##diag_pin: PG11
+#run_current: 0.650
+#stealthchop_threshold: 999999
+
+#[tmc2209 extruder]
+#uart_pin: PF2
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2209 extruder1]
+#uart_pin: PE4
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2209 extruder2]
+#uart_pin: PE1
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2209 extruder3]
+#uart_pin: PD3
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+########################################
+# TMC2130 configuration
+########################################
+
+#[tmc2130 stepper_x]
+#cs_pin: PC4
+#spi_bus: spi1
+##diag1_pin: PG6
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2130 stepper_y]
+#cs_pin: PD11
+#spi_bus: spi1
+##diag1_pin: PG9
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2130 stepper_z]
+#cs_pin: PC6
+#spi_bus: spi1
+##diag1_pin: PG10
+#run_current: 0.650
+#stealthchop_threshold: 999999
+
+#[tmc2130 stepper_]
+#cs_pin: PC7
+#spi_bus: spi1
+##diag1_pin: PG11
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2130 extruder]
+#cs_pin: PF2
+#spi_bus: spi1
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2130 extruder1]
+#cs_pin: PE4
+#spi_bus: spi1
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2130 extruder2]
+#cs_pin: PE1
+#spi_bus: spi1
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2130 extruder3]
+#cs_pin: PD3
+#spi_bus: spi1
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+[board_pins]
+aliases:
+    # EXP1 header
+    EXP1_1=PE8, EXP1_2=PE7,
+    EXP1_3=PE9, EXP1_4=PE10,
+    EXP1_5=PE12, EXP1_6=PE13,    # Slot in the socket on this side
+    EXP1_7=PE14, EXP1_8=PE15,
+    EXP1_9=<GND>, EXP1_10=<5V>,
+
+    # EXP2 header
+    EXP2_1=PA6, EXP2_2=PA5,
+    EXP2_3=PB1, EXP2_4=PA4,
+    EXP2_5=PB2, EXP2_6=PA7,      # Slot in the socket on this side
+    EXP2_7=PC15, EXP2_8=<RST>,
+    EXP2_9=<GND>, EXP2_10=PC5
+
+# See the sample-lcd.cfg file for definitions of common LCD displays.
+
+# A [probe] section can be defined instead with a pin: setting identical
+# to the sensor_pin: for a bltouch
+#[bltouch]
+#sensor_pin: PB7
+#control_pin: PB6
+#z_offset: 0
+
+#[neopixel my_neopixel]
+#pin: PB0

config/generic-bigtreetech-octopus-pro-v1.1.cfg

@@ -0,0 +1,285 @@
+# This file contains common pin mappings for the BigTreeTech Octopus
+# Pro v1.1 board.
+
+# Important! Do not use this config with an Octopus Pro v1.0 board nor
+# non-Pro board.
+
+# To use this config, during "make menuconfig", select "Enable
+# low-level configuration options", select the STM32H723
+# micro-controller, select a "128KiB bootloader", and select a "25Mhz
+# crystal".
+
+# See docs/Config_Reference.md for a description of parameters.
+
+# Driver0
+[stepper_x]
+step_pin: PF13
+dir_pin: PF12
+enable_pin: !PF14
+microsteps: 16
+rotation_distance: 40
+endstop_pin: PG6
+position_endstop: 0
+position_max: 200
+homing_speed: 50
+
+# Driver1
+[stepper_y]
+step_pin: PG0
+dir_pin: PG1
+enable_pin: !PF15
+microsteps: 16
+rotation_distance: 40
+endstop_pin: PG9
+position_endstop: 0
+position_max: 200
+homing_speed: 50
+
+# Driver2
+[stepper_z]
+step_pin: PF11
+dir_pin: PG3
+enable_pin: !PG5
+microsteps: 16
+rotation_distance: 8
+endstop_pin: PG10
+position_endstop: 0.5
+position_max: 200
+
+# Driver3
+# The Octopus only has 4 heater outputs which leaves an extra stepper
+# This can be used for a second Z stepper, dual_carriage, extruder co-stepper,
+# or other accesory such as an MMU
+#[stepper_]
+#step_pin: PG4
+#dir_pin: PC1
+#enable_pin: !PA2
+#endstop_pin: PG11
+#...
+
+# Driver4
+[extruder]
+step_pin: PF9
+dir_pin: PF10
+enable_pin: !PG2
+microsteps: 16
+rotation_distance: 33.500
+nozzle_diameter: 0.400
+filament_diameter: 1.750
+heater_pin: PA0 # HE0
+sensor_pin:  PF4 # T0
+sensor_type: EPCOS 100K B57560G104F
+control: pid
+pid_Kp: 22.2
+pid_Ki: 1.08
+pid_Kd: 114
+min_temp: 0
+max_temp: 250
+
+#[filament_switch_sensor material_0]
+#switch_pin: PG12
+
+# Driver5
+#[extruder1]
+#step_pin: PC13
+#dir_pin: PF0
+#enable_pin: !PF1
+#heater_pin: PA3 # HE1
+#sensor_pin: PF5 # T1
+#...
+
+#[filament_switch_sensor material_1]
+#switch_pin: PG13
+
+# Driver6
+#[extruder2]
+#step_pin: PE2
+#dir_pin: PE3
+#enable_pin: !PD4
+#heater_pin: PB0 # HE2
+#sensor_pin: PF6 # T2
+#...
+
+#[filament_switch_sensor material_2]
+#switch_pin: PG14
+
+# Driver7
+#[extruder3]
+#step_pin: PE6
+#dir_pin: PA14
+#enable_pin: !PE0
+#heater_pin: PB11 # HE3
+#sensor_pin: PF7 # T3
+#...
+
+#[filament_switch_sensor material_3]
+#switch_pin: PG15
+
+[heater_bed]
+heater_pin: PA1
+sensor_pin: PF3 # TB
+sensor_type: ATC Semitec 104GT-2
+control: watermark
+min_temp: 0
+max_temp: 130
+
+[fan]
+pin: PA8
+
+#[heater_fan fan1]
+#pin: PE5
+
+#[heater_fan fan2]
+#pin: PD12
+
+#[heater_fan fan3]
+#pin: PD13
+
+#[heater_fan fan4]
+#pin: PD14
+
+#[controller_fan fan5]
+#pin: PD15
+
+[mcu]
+serial: /dev/serial/by-id/usb-Klipper_Klipper_firmware_12345-if00
+# CAN bus is also available on this board
+
+[printer]
+kinematics: cartesian
+max_velocity: 300
+max_accel: 3000
+max_z_velocity: 5
+max_z_accel: 100
+
+########################################
+# TMC2209 configuration
+########################################
+
+#[tmc2209 stepper_x]
+#uart_pin: PC4
+##diag_pin: PG6
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2209 stepper_y]
+#uart_pin: PD11
+##diag_pin: PG9
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2209 stepper_z]
+#uart_pin: PC6
+##diag_pin: PG10
+#run_current: 0.650
+#stealthchop_threshold: 999999
+
+#[tmc2209 stepper_]
+#uart_pin: PC7
+##diag_pin: PG11
+#run_current: 0.650
+#stealthchop_threshold: 999999
+
+#[tmc2209 extruder]
+#uart_pin: PF2
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2209 extruder1]
+#uart_pin: PE4
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2209 extruder2]
+#uart_pin: PE1
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2209 extruder3]
+#uart_pin: PD3
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+########################################
+# TMC2130 configuration
+########################################
+
+#[tmc2130 stepper_x]
+#cs_pin: PC4
+#spi_bus: spi1
+##diag1_pin: PG6
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2130 stepper_y]
+#cs_pin: PD11
+#spi_bus: spi1
+##diag1_pin: PG9
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2130 stepper_z]
+#cs_pin: PC6
+#spi_bus: spi1
+##diag1_pin: PG10
+#run_current: 0.650
+#stealthchop_threshold: 999999
+
+#[tmc2130 stepper_]
+#cs_pin: PC7
+#spi_bus: spi1
+##diag1_pin: PG11
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2130 extruder]
+#cs_pin: PF2
+#spi_bus: spi1
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2130 extruder1]
+#cs_pin: PE4
+#spi_bus: spi1
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2130 extruder2]
+#cs_pin: PE1
+#spi_bus: spi1
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2130 extruder3]
+#cs_pin: PD3
+#spi_bus: spi1
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+[board_pins]
+aliases:
+    # EXP1 header
+    EXP1_1=PE8, EXP1_2=PE7,
+    EXP1_3=PE9, EXP1_4=PE10,
+    EXP1_5=PE12, EXP1_6=PE13,    # Slot in the socket on this side
+    EXP1_7=PE14, EXP1_8=PE15,
+    EXP1_9=<GND>, EXP1_10=<5V>,
+
+    # EXP2 header
+    EXP2_1=PA6, EXP2_2=PA5,
+    EXP2_3=PB1, EXP2_4=PA4,
+    EXP2_5=PB2, EXP2_6=PA7,      # Slot in the socket on this side
+    EXP2_7=PC15, EXP2_8=<RST>,
+    EXP2_9=<GND>, EXP2_10=PC5
+
+# See the sample-lcd.cfg file for definitions of common LCD displays.
+
+# A [probe] section can be defined instead with a pin: setting identical
+# to the sensor_pin: for a bltouch
+#[bltouch]
+#sensor_pin: PB7
+#control_pin: PB6
+#z_offset: 0
+
+#[neopixel my_neopixel]
+#pin: PB10

config/generic-bigtreetech-octopus-v1.1.cfg

@@ -0,0 +1,288 @@
+# This file contains common pin mappings for the BigTreeTech Octopus
+# (non-Pro) boards.
+
+# Important! Do not use this config with an Octopus Pro v1.1 board as
+# doing so could result in a heater being inadvertently enabled.
+
+# To use this config, start by identifying the micro-controller on the
+# board - it may be an STM32F446, or STM32F429.  Select the
+# appropriate micro-controller in "make menuconfig" and select "Enable
+# low-level configuration options". For STM32F446 boards the firmware
+# should be compiled with a "32KiB bootloader" and a "12MHz crystal"
+# clock reference. For STM32F429 boards use a "32KiB bootloader" and
+# an "8MHz crystal".
+
+# See docs/Config_Reference.md for a description of parameters.
+
+# Driver0
+[stepper_x]
+step_pin: PF13
+dir_pin: PF12
+enable_pin: !PF14
+microsteps: 16
+rotation_distance: 40
+endstop_pin: PG6
+position_endstop: 0
+position_max: 200
+homing_speed: 50
+
+# Driver1
+[stepper_y]
+step_pin: PG0
+dir_pin: PG1
+enable_pin: !PF15
+microsteps: 16
+rotation_distance: 40
+endstop_pin: PG9
+position_endstop: 0
+position_max: 200
+homing_speed: 50
+
+# Driver2
+[stepper_z]
+step_pin: PF11
+dir_pin: PG3
+enable_pin: !PG5
+microsteps: 16
+rotation_distance: 8
+endstop_pin: PG10
+position_endstop: 0.5
+position_max: 200
+
+# Driver3
+# The Octopus only has 4 heater outputs which leaves an extra stepper
+# This can be used for a second Z stepper, dual_carriage, extruder co-stepper,
+# or other accesory such as an MMU
+#[stepper_]
+#step_pin: PG4
+#dir_pin: PC1
+#enable_pin: !PA0
+#endstop_pin: PG11
+#...
+
+# Driver4
+[extruder]
+step_pin: PF9
+dir_pin: PF10
+enable_pin: !PG2
+microsteps: 16
+rotation_distance: 33.500
+nozzle_diameter: 0.400
+filament_diameter: 1.750
+heater_pin: PA2 # HE0
+sensor_pin:  PF4 # T0
+sensor_type: EPCOS 100K B57560G104F
+control: pid
+pid_Kp: 22.2
+pid_Ki: 1.08
+pid_Kd: 114
+min_temp: 0
+max_temp: 250
+
+#[filament_switch_sensor material_0]
+#switch_pin: PG12
+
+# Driver5
+#[extruder1]
+#step_pin: PC13
+#dir_pin: PF0
+#enable_pin: !PF1
+#heater_pin: PA3 # HE1
+#sensor_pin: PF5 # T1
+#...
+
+#[filament_switch_sensor material_1]
+#switch_pin: PG13
+
+# Driver6
+#[extruder2]
+#step_pin: PE2
+#dir_pin: PE3
+#enable_pin: !PD4
+#heater_pin: PB10 # HE2
+#sensor_pin: PF6 # T2
+#...
+
+#[filament_switch_sensor material_2]
+#switch_pin: PG14
+
+# Driver7
+#[extruder3]
+#step_pin: PE6
+#dir_pin: PA14
+#enable_pin: !PE0
+#heater_pin: PB11 # HE3
+#sensor_pin: PF7 # T3
+#...
+
+#[filament_switch_sensor material_3]
+#switch_pin: PG15
+
+[heater_bed]
+heater_pin: PA1
+sensor_pin: PF3 # TB
+sensor_type: ATC Semitec 104GT-2
+control: watermark
+min_temp: 0
+max_temp: 130
+
+[fan]
+pin: PA8
+
+#[heater_fan fan1]
+#pin: PE5
+
+#[heater_fan fan2]
+#pin: PD12
+
+#[heater_fan fan3]
+#pin: PD13
+
+#[heater_fan fan4]
+#pin: PD14
+
+#[controller_fan fan5]
+#pin: PD15
+
+[mcu]
+serial: /dev/serial/by-id/usb-Klipper_Klipper_firmware_12345-if00
+# CAN bus is also available on this board
+
+[printer]
+kinematics: cartesian
+max_velocity: 300
+max_accel: 3000
+max_z_velocity: 5
+max_z_accel: 100
+
+########################################
+# TMC2209 configuration
+########################################
+
+#[tmc2209 stepper_x]
+#uart_pin: PC4
+##diag_pin: PG6
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2209 stepper_y]
+#uart_pin: PD11
+##diag_pin: PG9
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2209 stepper_z]
+#uart_pin: PC6
+##diag_pin: PG10
+#run_current: 0.650
+#stealthchop_threshold: 999999
+
+#[tmc2209 stepper_]
+#uart_pin: PC7
+##diag_pin: PG11
+#run_current: 0.650
+#stealthchop_threshold: 999999
+
+#[tmc2209 extruder]
+#uart_pin: PF2
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2209 extruder1]
+#uart_pin: PE4
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2209 extruder2]
+#uart_pin: PE1
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2209 extruder3]
+#uart_pin: PD3
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+########################################
+# TMC2130 configuration
+########################################
+
+#[tmc2130 stepper_x]
+#cs_pin: PC4
+#spi_bus: spi1
+##diag1_pin: PG6
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2130 stepper_y]
+#cs_pin: PD11
+#spi_bus: spi1
+##diag1_pin: PG9
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2130 stepper_z]
+#cs_pin: PC6
+#spi_bus: spi1
+##diag1_pin: PG10
+#run_current: 0.650
+#stealthchop_threshold: 999999
+
+#[tmc2130 stepper_]
+#cs_pin: PC7
+#spi_bus: spi1
+##diag1_pin: PG11
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2130 extruder]
+#cs_pin: PF2
+#spi_bus: spi1
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2130 extruder1]
+#cs_pin: PE4
+#spi_bus: spi1
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2130 extruder2]
+#cs_pin: PE1
+#spi_bus: spi1
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2130 extruder3]
+#cs_pin: PD3
+#spi_bus: spi1
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+[board_pins]
+aliases:
+    # EXP1 header
+    EXP1_1=PE8, EXP1_2=PE7,
+    EXP1_3=PE9, EXP1_4=PE10,
+    EXP1_5=PE12, EXP1_6=PE13,    # Slot in the socket on this side
+    EXP1_7=PE14, EXP1_8=PE15,
+    EXP1_9=<GND>, EXP1_10=<5V>,
+
+    # EXP2 header
+    EXP2_1=PA6, EXP2_2=PA5,
+    EXP2_3=PB1, EXP2_4=PA4,
+    EXP2_5=PB2, EXP2_6=PA7,      # Slot in the socket on this side
+    EXP2_7=PC15, EXP2_8=<RST>,
+    EXP2_9=<GND>, EXP2_10=PC5
+
+# See the sample-lcd.cfg file for definitions of common LCD displays.
+
+# A [probe] section can be defined instead with a pin: setting identical
+# to the sensor_pin: for a bltouch
+#[bltouch]
+#sensor_pin: PB7
+#control_pin: PB6
+#z_offset: 0
+
+#[neopixel my_neopixel]
+#pin: PB0

config/generic-bigtreetech-skr-2.cfg

@@ -0,0 +1,155 @@
+# This file contains common pin mappings for the BigTreeTech SKR 2.
+# To use this config, the firmware should be compiled for the
+# STM32F407 with a "32KiB bootloader".
+
+# In newer versions of this board shipped in late 2021 the STM32F429
+# is used, if this is the case compile for this with a "32KiB bootloader"
+# You will need to check the chip on your board to identify which you have.
+#
+# The "make flash" command does not work on the SKR 2. Instead,
+# after running "make", copy the generated "out/klipper.bin" file to a
+# file named "firmware.bin" on an SD card and then restart the SKR 2
+# with that SD card.
+
+# See docs/Config_Reference.md for a description of parameters.
+
+# Note: The initial revision of this board has a flaw that can cause
+# damage to itself and other boards. Be sure to verify the board is
+# not impacted by this flaw before using it.
+
+[stepper_x]
+step_pin: PE2
+dir_pin: PE1
+enable_pin: !PE3
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^PC1
+position_endstop: 0
+position_max: 200
+homing_speed: 50
+
+[stepper_y]
+step_pin: PD5
+dir_pin: !PD4
+enable_pin: !PD6
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^PC3
+position_endstop: 0
+position_max: 200
+homing_speed: 50
+
+[stepper_z]
+step_pin: PA15
+dir_pin: PA8
+enable_pin: !PD1
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^PC0
+position_endstop: 0.5
+position_max: 200
+
+[extruder]
+step_pin: PD15
+dir_pin: PD14
+enable_pin: !PC7
+microsteps: 16
+rotation_distance: 33.500
+nozzle_diameter: 0.400
+filament_diameter: 1.750
+heater_pin: PB3
+sensor_type: EPCOS 100K B57560G104F
+sensor_pin: PA2
+control: pid
+pid_Kp: 22.2
+pid_Ki: 1.08
+pid_Kd: 114
+min_temp: 0
+max_temp: 250
+
+#[extruder1]
+#step_pin: PD11
+#dir_pin: PD10
+#enable_pin: !PD13
+#heater_pin: PB4
+#sensor_pin: PA3
+#...
+
+[heater_bed]
+heater_pin: PD7
+sensor_type: Generic 3950
+sensor_pin: PA1
+control: watermark
+min_temp: 0
+max_temp: 130
+
+[fan]
+pin: PB7
+
+#[heater_fan fan1]
+#pin: PB6
+
+#[heater_fan fan2]
+#pin: PB5
+
+# Due to BTT implementing a Marlin-specific safety feature,
+# "anti-reversal stepper protection", this pin needs pulling
+# high to pass power to stepper drivers and most FETs
+
+[output_pin motor_power]
+pin: PC13
+value: 1
+
+[mcu]
+serial: /dev/serial/by-id/usb-Klipper_Klipper_firmware_12345-if00
+
+[printer]
+kinematics: cartesian
+max_velocity: 300
+max_accel: 3000
+max_z_velocity: 5
+max_z_accel: 100
+
+########################################
+# EXP1 / EXP2 (display) pins
+########################################
+
+[board_pins]
+aliases:
+    # EXP1 header
+    EXP1_1=PC5, EXP1_3=PB1, EXP1_5=PE10, EXP1_7=PE12, EXP1_9=<GND>,
+    EXP1_2=PB0, EXP1_4=PE9, EXP1_6=PE11, EXP1_8=PE13, EXP1_10=<5V>,
+    # EXP2 header
+    EXP2_1=PA6, EXP2_3=PE7, EXP2_5=PB2, EXP2_7=PC4,   EXP2_9=<GND>,
+    EXP2_2=PA5, EXP2_4=PA4, EXP2_6=PA7, EXP2_8=<RST>, EXP2_10=<NC>
+
+# See the sample-lcd.cfg file for definitions of common LCD displays.
+
+########################################
+# TMC2209 configuration
+########################################
+
+#[tmc2209 stepper_x]
+#uart_pin: PE0
+#run_current: 0.800
+#diag_pin:
+
+#[tmc2209 stepper_y]
+#uart_pin: PD3
+#run_current: 0.800
+#diag_pin:
+
+#[tmc2209 stepper_z]
+#uart_pin: PD0
+#run_current: 0.800
+#diag_pin:
+
+#[tmc2209 extruder]
+#uart_pin: PC6
+#run_current: 0.600
+#diag_pin:
+
+#[tmc2209 extruder1]
+#uart_pin: PD12
+#run_current: 0.600
+#diag_pin:

config/generic-bigtreetech-skr-3.cfg

@@ -0,0 +1,185 @@
+# This file contains common pin mappings for the BigTreeTech SKR 3.
+# This board can ship with one of two chips, STM32H743 or STM32H723.
+# To use this config, during "make menuconfig" enable "low-level
+# options", "STM32H743" or "STM32H723", "128KiB bootloader",
+# and "25MHz clock".
+
+# See docs/Config_Reference.md for a description of parameters.
+
+[stepper_x]
+step_pin: PD4
+dir_pin: PD3
+enable_pin: !PD6
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^PC1
+position_endstop: 0
+position_max: 200
+homing_speed: 50
+
+[stepper_y]
+step_pin: PA15
+dir_pin: !PA8
+enable_pin: !PD1
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^PC3
+position_endstop: 0
+position_max: 200
+homing_speed: 50
+
+[stepper_z]
+step_pin: PE2
+dir_pin: PE3
+enable_pin: !PE0
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^PC0
+position_endstop: 0.5
+position_max: 200
+
+[extruder]
+step_pin: PD15
+dir_pin: PD14
+enable_pin: !PC7
+microsteps: 16
+rotation_distance: 33.500
+nozzle_diameter: 0.400
+filament_diameter: 1.750
+heater_pin: PB3
+sensor_type: EPCOS 100K B57560G104F
+sensor_pin: PA2
+control: pid
+pid_Kp: 22.2
+pid_Ki: 1.08
+pid_Kd: 114
+min_temp: 0
+max_temp: 250
+
+#[extruder1]
+#step_pin: PD11
+#dir_pin: PD10
+#enable_pin: !PD13
+#heater_pin: PB4
+#sensor_pin: PA3
+#...
+
+[heater_bed]
+heater_pin: PD7
+sensor_type: Generic 3950
+sensor_pin: PA1
+control: watermark
+min_temp: 0
+max_temp: 130
+
+[fan]
+pin: PB7
+
+#[heater_fan fan1]
+#pin: PB6
+
+#[heater_fan fan2]
+#pin: PB5
+
+[mcu]
+serial: /dev/serial/by-id/usb-Klipper_Klipper_firmware_12345-if00
+
+[printer]
+kinematics: cartesian
+max_velocity: 300
+max_accel: 3000
+max_z_velocity: 5
+max_z_accel: 100
+
+########################################
+# EXP1 / EXP2 (display) pins
+########################################
+
+[board_pins]
+aliases:
+    # EXP1 header
+    EXP1_1=PC5, EXP1_3=PB1, EXP1_5=PE9,  EXP1_7=PE11, EXP1_9=<GND>,
+    EXP1_2=PB0, EXP1_4=PE8, EXP1_6=PE10, EXP1_8=PE12, EXP1_10=<5V>,
+    # EXP2 header
+    EXP2_1=PA6, EXP2_3=PE7, EXP2_5=PB2, EXP2_7=PC4,   EXP2_9=<GND>,
+    EXP2_2=PA5, EXP2_4=PA4, EXP2_6=PA7, EXP2_8=<RST>, EXP2_10=<NC>
+
+# See the sample-lcd.cfg file for definitions of common LCD displays.
+
+########################################
+# TMC2209 configuration
+########################################
+
+#[tmc2209 stepper_x]
+#uart_pin: PD5
+#run_current: 0.800
+#diag_pin:
+
+#[tmc2209 stepper_y]
+#uart_pin: PD0
+#run_current: 0.800
+#diag_pin:
+
+#[tmc2209 stepper_z]
+#uart_pin: PE1
+#run_current: 0.800
+#diag_pin:
+
+#[tmc2209 extruder]
+#uart_pin: PC6
+#run_current: 0.600
+#diag_pin:
+
+#[tmc2209 extruder1]
+#uart_pin: PD12
+#run_current: 0.600
+#diag_pin:
+
+########################################
+# TMC2130 configuration
+########################################
+
+#[tmc2130 stepper_x]
+#cs_pin: PD5
+#spi_software_miso_pin: PE15
+#spi_software_mosi_pin: PE13
+#spi_software_sclk_pin: PE14
+#run_current: 0.800
+#stealthchop_threshold: 999999
+#diag1_pin: PC1
+
+#[tmc2130 stepper_y]
+#cs_pin: PD0
+#spi_software_miso_pin: PE15
+#spi_software_mosi_pin: PE13
+#spi_software_sclk_pin: PE14
+#run_current: 0.800
+#stealthchop_threshold: 999999
+#diag1_pin: PC3
+
+#[tmc2130 stepper_z]
+#cs_pin: PE1
+#spi_software_miso_pin: PE15
+#spi_software_mosi_pin: PE13
+#spi_software_sclk_pin: PE14
+#run_current: 0.650
+#stealthchop_threshold: 999999
+#diag1_pin: PC0
+
+#[tmc2130 extruder]
+#cs_pin: PC6
+#spi_software_miso_pin: PE15
+#spi_software_mosi_pin: PE13
+#spi_software_sclk_pin: PE14
+#run_current: 0.800
+#stealthchop_threshold: 999999
+#diag1_pin: PC2
+
+#[tmc2130 extruder1]
+#cs_pin: PD12
+#spi_software_miso_pin: PE15
+#spi_software_mosi_pin: PE13
+#spi_software_sclk_pin: PE14
+#run_current: 0.800
+#stealthchop_threshold: 999999
+#diag1_pin: PA0

config/generic-bigtreetech-skr-cr6-v1.0.cfg

@@ -0,0 +1,120 @@
+# This file contains common pin mappings for the BIGTREETECH SKR CR6
+# V1.0. To use this config, the firmware should be compiled for the
+# STM32F103 with a "28KiB bootloader" and USB communication. Also,
+# select "Enable extra low-level configuration options" and configure
+# "GPIO pins to set at micro-controller startup" to "!PA14".
+
+# The "make flash" command does not work on the SKR CR6. Instead,
+# after running "make", copy the generated "out/klipper.bin" file to a
+# file named "firmware.bin" on an SD card and then restart the SKR
+# CR6 V1.0 with that SD card.
+
+# See docs/Config_Reference.md for a description of parameters.
+
+[stepper_x]
+step_pin: PB13
+dir_pin: !PB12
+enable_pin: !PB14
+microsteps: 16
+rotation_distance: 40
+endstop_pin: PC0
+position_min: -5
+position_endstop: -5
+position_max: 235
+homing_speed: 50
+
+[tmc2209 stepper_x]
+uart_pin: PC11
+tx_pin: PC10
+run_current: 0.550
+stealthchop_threshold: 999999
+uart_address: 0
+
+[stepper_y]
+step_pin: PB10
+dir_pin: PB2
+enable_pin: !PB11
+microsteps: 16
+rotation_distance: 40
+endstop_pin: PC1
+position_min: -2
+position_endstop: -2
+position_max: 235
+homing_speed: 50
+
+[tmc2209 stepper_y]
+uart_pin: PC11
+tx_pin: PC10
+uart_address: 1
+run_current: 0.550
+stealthchop_threshold: 999999
+
+[stepper_z]
+step_pin: PB0
+dir_pin: !PC5
+enable_pin: !PB1
+microsteps: 16
+rotation_distance: 8
+endstop_pin: PC2
+position_endstop: 0.0
+position_min: -1.0
+position_max: 250
+
+[tmc2209 stepper_z]
+uart_pin: PC11
+tx_pin: PC10
+uart_address: 2
+run_current: 0.550
+stealthchop_threshold: 999999
+
+[extruder]
+step_pin: PB3
+dir_pin: !PB4
+enable_pin: !PD2
+microsteps: 16
+rotation_distance: 30.4768
+nozzle_diameter: 0.400
+filament_diameter: 1.750
+heater_pin: PC8
+sensor_type: EPCOS 100K B57560G104F
+sensor_pin: PA0
+control: pid
+pid_Kp: 14.32
+pid_Ki: 0.81
+pid_Kd: 63.12
+min_temp: 0
+max_temp: 275
+
+[tmc2209 extruder]
+uart_pin: PC11
+tx_pin: PC10
+uart_address: 3
+run_current: 0.600
+stealthchop_threshold: 999999
+
+[heater_bed]
+heater_pin: PC9
+sensor_type: EPCOS 100K B57560G104F
+sensor_pin: PC3
+control: pid
+pid_Kp: 79.49
+pid_Ki: 1.17
+pid_Kd: 1349.52
+min_temp: 0
+max_temp: 120
+
+[fan]
+pin: PC6
+
+[mcu]
+serial: /dev/serial/by-id/usb-Klipper_stm32f103xe_000000000000000000000000-if00
+
+[printer]
+kinematics: cartesian
+max_velocity: 500
+max_accel: 500
+max_z_velocity: 5
+max_z_accel: 100
+
+[static_digital_output usb_pullup_enable]
+pins: !PA14

config/generic-bigtreetech-skr-e3-dip.cfg

@@ -0,0 +1,159 @@
+# This file contains common pin mappings for the BIGTREETECH SKR E3
+# DIP. To use this config, the firmware should be compiled for the
+# STM32F103 with a "28KiB bootloader" and USB communication. Also,
+# select "Enable extra low-level configuration options" and configure
+# "GPIO pins to set at micro-controller startup" to "!PC13".
+
+# The "make flash" command does not work on the SKR E3 DIP. Instead,
+# after running "make", copy the generated "out/klipper.bin" file to a
+# file named "firmware.bin" on an SD card and then restart the SKR E3
+# DIP with that SD card.
+
+# See docs/Config_Reference.md for a description of parameters.
+
+# Note: This board has a design flaw in its thermistor circuits that
+# cause inaccurate temperatures (most noticeable at low temperatures).
+
+[stepper_x]
+step_pin: PC6
+dir_pin: !PB15
+enable_pin: !PC7
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^PC1
+position_endstop: 0
+position_max: 235
+homing_speed: 50
+
+[stepper_y]
+step_pin: PB13
+dir_pin: !PB12
+enable_pin: !PB14
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^PC0
+position_endstop: 0
+position_max: 235
+homing_speed: 50
+
+[stepper_z]
+step_pin: PB10
+dir_pin: PB2
+enable_pin: !PB11
+microsteps: 16
+rotation_distance: 8
+endstop_pin: ^PC15
+position_endstop: 0.0
+position_max: 250
+
+[extruder]
+step_pin: PB0
+dir_pin: !PC5
+enable_pin: !PB1
+microsteps: 16
+rotation_distance: 33.500
+nozzle_diameter: 0.400
+filament_diameter: 1.750
+heater_pin: PC8
+sensor_type: EPCOS 100K B57560G104F
+sensor_pin: PA0
+control: pid
+pid_Kp: 21.527
+pid_Ki: 1.063
+pid_Kd: 108.982
+min_temp: 0
+max_temp: 250
+
+[heater_bed]
+heater_pin: PC9
+sensor_type: ATC Semitec 104GT-2
+sensor_pin: PC3
+control: pid
+pid_Kp: 54.027
+pid_Ki: 0.770
+pid_Kd: 948.182
+min_temp: 0
+max_temp: 130
+
+[fan]
+pin: PA8
+
+[mcu]
+serial: /dev/serial/by-id/usb-Klipper_Klipper_firmware_12345-if00
+
+[printer]
+kinematics: cartesian
+max_velocity: 300
+max_accel: 3000
+max_z_velocity: 5
+max_z_accel: 100
+
+[static_digital_output usb_pullup_enable]
+pins: !PC13
+
+
+########################################
+# TMC2208 configuration
+########################################
+
+#[tmc2208 stepper_x]
+#uart_pin: PC10
+#run_current: 0.580
+#stealthchop_threshold: 999999
+
+#[tmc2208 stepper_y]
+#uart_pin: PC11
+#run_current: 0.580
+#stealthchop_threshold: 999999
+
+#[tmc2208 stepper_z]
+#uart_pin: PC12
+#run_current: 0.580
+#stealthchop_threshold: 999999
+
+#[tmc2208 extruder]
+#uart_pin: PD2
+#run_current: 0.650
+#stealthchop_threshold: 999999
+
+
+########################################
+# TMC2130 configuration
+########################################
+
+#[tmc2130 stepper_x]
+#cs_pin: PC10
+#spi_bus: spi3
+#run_current: 0.580
+#stealthchop_threshold: 999999
+
+#[tmc2130 stepper_y]
+#cs_pin: PC11
+#spi_bus: spi3
+#run_current: 0.580
+#stealthchop_threshold: 999999
+
+#[tmc2130 stepper_z]
+#cs_pin: PC12
+#spi_bus: spi3
+#run_current: 0.580
+#stealthchop_threshold: 999999
+
+#[tmc2130 extruder]
+#cs_pin: PD2
+#spi_bus: spi3
+#run_current: 0.650
+#stealthchop_threshold: 999999
+
+
+########################################
+# EXP1 (display) pins
+########################################
+
+[board_pins]
+aliases:
+    # EXP1 header
+    EXP1_1=PA15, EXP1_3=PA9,   EXP1_5=PA10, EXP1_7=PB8, EXP1_9=<GND>,
+    EXP1_2=PB6,  EXP1_4=<RST>, EXP1_6=PB9,  EXP1_8=PB7, EXP1_10=<5V>
+
+# See the sample-lcd.cfg file for definitions of common LCD displays.

config/generic-bigtreetech-skr-e3-turbo.cfg

@@ -0,0 +1,130 @@
+# This file contains common pin mappings for the BIGTREETECH SKR E3
+# Turbo. To use this config, the firmware should be compiled for the
+# LPC1769.
+
+# See docs/Config_Reference.md for a description of parameters.
+
+[stepper_x]
+step_pin: P1.4
+dir_pin: !P1.8
+enable_pin: !P1.0
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^P1.29
+position_endstop: 0
+position_max: 235
+homing_speed: 50
+
+[tmc2209 stepper_x]
+uart_pin: P1.1
+#diag_pin: P1.29
+run_current: 0.580
+stealthchop_threshold: 999999
+
+[stepper_y]
+step_pin: P1.14
+dir_pin: !P1.15
+enable_pin: !P1.9
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^P1.28
+position_endstop: 0
+position_max: 235
+homing_speed: 50
+
+[tmc2209 stepper_y]
+uart_pin: P1.10
+#diag_pin: P1.28
+run_current: 0.580
+stealthchop_threshold: 999999
+
+[stepper_z]
+step_pin: P4.29
+dir_pin: P4.28
+enable_pin: !P1.16
+microsteps: 16
+rotation_distance: 8
+endstop_pin: ^P1.27
+position_endstop: 0.0
+position_max: 250
+
+[tmc2209 stepper_z]
+uart_pin: P1.17
+#diag_pin: P1.27
+run_current: 0.580
+stealthchop_threshold: 999999
+
+[extruder]
+step_pin: P2.6
+dir_pin: !P2.7
+enable_pin: !P0.4
+microsteps: 16
+rotation_distance: 33.500
+nozzle_diameter: 0.400
+filament_diameter: 1.750
+heater_pin: P2.3
+sensor_type: EPCOS 100K B57560G104F
+sensor_pin: P0.24
+control: pid
+pid_Kp: 21.527
+pid_Ki: 1.063
+pid_Kd: 108.982
+min_temp: 0
+max_temp: 250
+
+[tmc2209 extruder]
+uart_pin: P0.5
+#diag_pin: P1.26
+run_current: 0.650
+stealthchop_threshold: 999999
+
+#[extruder1]
+#step_pin: P2.11
+#dir_pin: P2.12
+#enable_pin: !P0.21
+#heater_pin: P2.4
+#sensor_pin: P0.23
+#...
+
+#[tmc2209 extruder1]
+#uart_pin: P0.22
+##diag_pin: P1.25
+#...
+
+[heater_bed]
+heater_pin: P2.5
+sensor_type: ATC Semitec 104GT-2
+sensor_pin: P0.25
+control: pid
+pid_Kp: 54.027
+pid_Ki: 0.770
+pid_Kd: 948.182
+min_temp: 0
+max_temp: 130
+
+[fan]
+pin: P2.1
+
+[heater_fan heatbreak_cooling_fan]
+pin: P2.2
+
+[mcu]
+serial: /dev/serial/by-id/usb-Klipper_lpc1769_00000000000000000000000000000000-if00
+
+[printer]
+kinematics: cartesian
+max_velocity: 300
+max_accel: 3000
+max_z_velocity: 5
+max_z_accel: 100
+
+[static_digital_output tmc_standby_pins]
+pins: !P3.26, !P3.25, !P1.18, !P1.19, !P2.13
+
+[board_pins]
+aliases:
+    # EXP1 header
+    EXP1_1=P2.8,  EXP1_3=P0.19, EXP1_5=P0.20, EXP1_7=P0.17, EXP1_9=<GND>,
+    EXP1_2=P0.16, EXP1_4=<RST>, EXP1_6=P0.15, EXP1_8=P0.18, EXP1_10=<5V>
+
+# See the sample-lcd.cfg file for definitions of common LCD displays.

config/generic-bigtreetech-skr-mini-e3-v1.0.cfg

@@ -0,0 +1,128 @@
+# This file contains common pin mappings for the BIGTREETECH SKR mini
+# E3. To use this config, the firmware should be compiled for the
+# STM32F103 with a "28KiB bootloader" and USB communication. Also,
+# select "Enable extra low-level configuration options" and configure
+# "GPIO pins to set at micro-controller startup" to "!PC13".
+
+# The "make flash" command does not work on the SKR mini E3. Instead,
+# after running "make", copy the generated "out/klipper.bin" file to a
+# file named "firmware.bin" on an SD card and then restart the SKR
+# mini E3 with that SD card.
+
+# See docs/Config_Reference.md for a description of parameters.
+
+# Note: This board has a design flaw in its thermistor circuits that
+# cause inaccurate temperatures (most noticeable at low temperatures).
+
+[stepper_x]
+step_pin: PB13
+dir_pin: !PB12
+enable_pin: !PB14
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^PC0
+position_endstop: 0
+position_max: 235
+homing_speed: 50
+
+[tmc2209 stepper_x]
+uart_pin: PC11
+tx_pin: PC10
+uart_address: 0
+run_current: 0.580
+stealthchop_threshold: 999999
+
+[stepper_y]
+step_pin: PB10
+dir_pin: !PB2
+enable_pin: !PB11
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^PC1
+position_endstop: 0
+position_max: 235
+homing_speed: 50
+
+[tmc2209 stepper_y]
+uart_pin: PC11
+tx_pin: PC10
+uart_address: 2
+run_current: 0.580
+stealthchop_threshold: 999999
+
+[stepper_z]
+step_pin: PB0
+dir_pin: PC5
+enable_pin: !PB1
+microsteps: 16
+rotation_distance: 8
+endstop_pin: ^PC2
+position_endstop: 0.0
+position_max: 250
+
+[tmc2209 stepper_z]
+uart_pin: PC11
+tx_pin: PC10
+uart_address: 1
+run_current: 0.580
+stealthchop_threshold: 999999
+
+[extruder]
+step_pin: PB3
+dir_pin: !PB4
+enable_pin: !PD2
+microsteps: 16
+rotation_distance: 33.500
+nozzle_diameter: 0.400
+filament_diameter: 1.750
+heater_pin: PC8
+sensor_type: EPCOS 100K B57560G104F
+sensor_pin: PA0
+control: pid
+pid_Kp: 21.527
+pid_Ki: 1.063
+pid_Kd: 108.982
+min_temp: 0
+max_temp: 250
+
+[tmc2209 extruder]
+uart_pin: PC11
+tx_pin: PC10
+uart_address: 3
+run_current: 0.650
+stealthchop_threshold: 999999
+
+[heater_bed]
+heater_pin: PC9
+sensor_type: ATC Semitec 104GT-2
+sensor_pin: PC3
+control: pid
+pid_Kp: 54.027
+pid_Ki: 0.770
+pid_Kd: 948.182
+min_temp: 0
+max_temp: 130
+
+[fan]
+pin: PA8
+
+[mcu]
+serial: /dev/serial/by-id/usb-Klipper_Klipper_firmware_12345-if00
+
+[printer]
+kinematics: cartesian
+max_velocity: 300
+max_accel: 3000
+max_z_velocity: 5
+max_z_accel: 100
+
+[static_digital_output usb_pullup_enable]
+pins: !PC13
+
+[board_pins]
+aliases:
+    # EXP1 header
+    EXP1_1=PB5, EXP1_3=PA9,   EXP1_5=PA10, EXP1_7=PB8, EXP1_9=<GND>,
+    EXP1_2=PB6, EXP1_4=<RST>, EXP1_6=PB9,  EXP1_8=PB7, EXP1_10=<5V>
+
+# See the sample-lcd.cfg file for definitions of common LCD displays.

config/generic-bigtreetech-skr-mini-e3-v1.2.cfg

@@ -0,0 +1,120 @@
+# This file contains common pin mappings for the BIGTREETECH SKR mini
+# E3 v1.2. To use this config, the firmware should be compiled for the
+# STM32F103 with a "28KiB bootloader" and USB communication. Also,
+# select "Enable extra low-level configuration options" and configure
+# "GPIO pins to set at micro-controller startup" to "!PC13".
+
+# The "make flash" command does not work on the SKR mini E3. Instead,
+# after running "make", copy the generated "out/klipper.bin" file to a
+# file named "firmware.bin" on an SD card and then restart the SKR
+# mini E3 with that SD card.
+
+# See docs/Config_Reference.md for a description of parameters.
+
+# Note: This board has a design flaw in its thermistor circuits that
+# cause inaccurate temperatures (most noticeable at low temperatures).
+
+[stepper_x]
+step_pin: PB13
+dir_pin: !PB12
+enable_pin: !PB14
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^PC0
+position_endstop: 0
+position_max: 235
+homing_speed: 50
+
+[tmc2209 stepper_x]
+uart_pin: PB15
+run_current: 0.580
+stealthchop_threshold: 999999
+
+[stepper_y]
+step_pin: PB10
+dir_pin: !PB2
+enable_pin: !PB11
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^PC1
+position_endstop: 0
+position_max: 235
+homing_speed: 50
+
+[tmc2209 stepper_y]
+uart_pin: PC6
+run_current: 0.580
+stealthchop_threshold: 999999
+
+[stepper_z]
+step_pin: PB0
+dir_pin: PC5
+enable_pin: !PB1
+microsteps: 16
+rotation_distance: 8
+endstop_pin: ^PC2
+position_endstop: 0.0
+position_max: 250
+
+[tmc2209 stepper_z]
+uart_pin: PC10
+run_current: 0.580
+stealthchop_threshold: 999999
+
+[extruder]
+step_pin: PB3
+dir_pin: !PB4
+enable_pin: !PD2
+microsteps: 16
+rotation_distance: 33.500
+nozzle_diameter: 0.400
+filament_diameter: 1.750
+heater_pin: PC8
+sensor_type: EPCOS 100K B57560G104F
+sensor_pin: PA0
+control: pid
+pid_Kp: 21.527
+pid_Ki: 1.063
+pid_Kd: 108.982
+min_temp: 0
+max_temp: 250
+
+[tmc2209 extruder]
+uart_pin: PC11
+run_current: 0.650
+stealthchop_threshold: 999999
+
+[heater_bed]
+heater_pin: PC9
+sensor_type: ATC Semitec 104GT-2
+sensor_pin: PC3
+control: pid
+pid_Kp: 54.027
+pid_Ki: 0.770
+pid_Kd: 948.182
+min_temp: 0
+max_temp: 130
+
+[fan]
+pin: PA8
+
+[mcu]
+serial: /dev/serial/by-id/usb-Klipper_Klipper_firmware_12345-if00
+
+[printer]
+kinematics: cartesian
+max_velocity: 300
+max_accel: 3000
+max_z_velocity: 5
+max_z_accel: 100
+
+[static_digital_output usb_pullup_enable]
+pins: !PC13
+
+[board_pins]
+aliases:
+    # EXP1 header
+    EXP1_1=PB5, EXP1_3=PA9,   EXP1_5=PA10, EXP1_7=PB8, EXP1_9=<GND>,
+    EXP1_2=PB6, EXP1_4=<RST>, EXP1_6=PB9,  EXP1_8=PB7, EXP1_10=<5V>
+
+# See the sample-lcd.cfg file for definitions of common LCD displays.

config/generic-bigtreetech-skr-mini-e3-v2.0.cfg

@@ -0,0 +1,128 @@
+# This file contains common pin mappings for the BIGTREETECH SKR mini
+# E3 v2.0. To use this config, the firmware should be compiled for the
+# STM32F103 with a "28KiB bootloader" and USB communication. Also,
+# select "Enable extra low-level configuration options" and configure
+# "GPIO pins to set at micro-controller startup" to "!PA14".
+
+# The "make flash" command does not work on the SKR mini E3. Instead,
+# after running "make", copy the generated "out/klipper.bin" file to a
+# file named "firmware.bin" on an SD card and then restart the SKR
+# mini E3 with that SD card.
+
+# See docs/Config_Reference.md for a description of parameters.
+
+[stepper_x]
+step_pin: PB13
+dir_pin: !PB12
+enable_pin: !PB14
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^PC0
+position_endstop: 0
+position_max: 235
+homing_speed: 50
+
+[tmc2209 stepper_x]
+uart_pin: PC11
+tx_pin: PC10
+uart_address: 0
+run_current: 0.580
+stealthchop_threshold: 999999
+
+[stepper_y]
+step_pin: PB10
+dir_pin: !PB2
+enable_pin: !PB11
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^PC1
+position_endstop: 0
+position_max: 235
+homing_speed: 50
+
+[tmc2209 stepper_y]
+uart_pin: PC11
+tx_pin: PC10
+uart_address: 2
+run_current: 0.580
+stealthchop_threshold: 999999
+
+[stepper_z]
+step_pin: PB0
+dir_pin: PC5
+enable_pin: !PB1
+microsteps: 16
+rotation_distance: 8
+endstop_pin: ^PC2
+position_endstop: 0.0
+position_max: 250
+
+[tmc2209 stepper_z]
+uart_pin: PC11
+tx_pin: PC10
+uart_address: 1
+run_current: 0.580
+stealthchop_threshold: 999999
+
+[extruder]
+step_pin: PB3
+dir_pin: !PB4
+enable_pin: !PD2
+microsteps: 16
+rotation_distance: 33.500
+nozzle_diameter: 0.400
+filament_diameter: 1.750
+heater_pin: PC8
+sensor_type: EPCOS 100K B57560G104F
+sensor_pin: PA0
+control: pid
+pid_Kp: 21.527
+pid_Ki: 1.063
+pid_Kd: 108.982
+min_temp: 0
+max_temp: 250
+
+[tmc2209 extruder]
+uart_pin: PC11
+tx_pin: PC10
+uart_address: 3
+run_current: 0.650
+stealthchop_threshold: 999999
+
+[heater_bed]
+heater_pin: PC9
+sensor_type: ATC Semitec 104GT-2
+sensor_pin: PC3
+control: pid
+pid_Kp: 54.027
+pid_Ki: 0.770
+pid_Kd: 948.182
+min_temp: 0
+max_temp: 130
+
+[heater_fan heatbreak_cooling_fan]
+pin: PC7
+
+[fan]
+pin: PC6
+
+[mcu]
+serial: /dev/serial/by-id/usb-Klipper_Klipper_firmware_12345-if00
+
+[printer]
+kinematics: cartesian
+max_velocity: 300
+max_accel: 3000
+max_z_velocity: 5
+max_z_accel: 100
+
+[static_digital_output usb_pullup_enable]
+pins: !PA14
+
+[board_pins]
+aliases:
+    # EXP1 header
+    EXP1_1=PB5,  EXP1_3=PA9,   EXP1_5=PA10, EXP1_7=PB8,  EXP1_9=<GND>,
+    EXP1_2=PA15, EXP1_4=<RST>, EXP1_6=PB9,  EXP1_8=PB15, EXP1_10=<5V>
+
+# See the sample-lcd.cfg file for definitions of common LCD displays.

config/generic-bigtreetech-skr-mini-e3-v3.0.cfg

@@ -0,0 +1,126 @@
+# This file contains common pin mappings for the BIGTREETECH SKR mini
+# E3 v3.0. To use this config, the firmware should be compiled for the
+# STM32G0B1 with a "8KiB bootloader" and USB communication.
+
+# The "make flash" command does not work on the SKR mini E3. Instead,
+# after running "make", copy the generated "out/klipper.bin" file to a
+# file named "firmware.bin" on an SD card and then restart the SKR
+# mini E3 with that SD card.
+
+# See docs/Config_Reference.md for a description of parameters.
+
+[stepper_x]
+step_pin: PB13
+dir_pin: !PB12
+enable_pin: !PB14
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^PC0
+position_endstop: 0
+position_max: 235
+homing_speed: 50
+
+[tmc2209 stepper_x]
+uart_pin: PC11
+tx_pin: PC10
+uart_address: 0
+run_current: 0.580
+stealthchop_threshold: 999999
+
+[stepper_y]
+step_pin: PB10
+dir_pin: !PB2
+enable_pin: !PB11
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^PC1
+position_endstop: 0
+position_max: 235
+homing_speed: 50
+
+[tmc2209 stepper_y]
+uart_pin: PC11
+tx_pin: PC10
+uart_address: 2
+run_current: 0.580
+stealthchop_threshold: 999999
+
+[stepper_z]
+step_pin: PB0
+dir_pin: PC5
+enable_pin: !PB1
+microsteps: 16
+rotation_distance: 8
+endstop_pin: ^PC2
+position_endstop: 0.0
+position_max: 250
+
+[tmc2209 stepper_z]
+uart_pin: PC11
+tx_pin: PC10
+uart_address: 1
+run_current: 0.580
+stealthchop_threshold: 999999
+
+[extruder]
+step_pin: PB3
+dir_pin: !PB4
+enable_pin: !PD1
+microsteps: 16
+rotation_distance: 33.500
+nozzle_diameter: 0.400
+filament_diameter: 1.750
+heater_pin: PC8
+sensor_type: EPCOS 100K B57560G104F
+sensor_pin: PA0
+control: pid
+pid_Kp: 21.527
+pid_Ki: 1.063
+pid_Kd: 108.982
+min_temp: 0
+max_temp: 250
+
+[tmc2209 extruder]
+uart_pin: PC11
+tx_pin: PC10
+uart_address: 3
+run_current: 0.650
+stealthchop_threshold: 999999
+
+[heater_bed]
+heater_pin: PC9
+sensor_type: ATC Semitec 104GT-2
+sensor_pin: PC4
+control: pid
+pid_Kp: 54.027
+pid_Ki: 0.770
+pid_Kd: 948.182
+min_temp: 0
+max_temp: 130
+
+[heater_fan heatbreak_cooling_fan]
+pin: PC7
+
+[heater_fan controller_fan]
+pin: PB15
+
+[fan]
+pin: PC6
+
+[mcu]
+serial: /dev/serial/by-id/usb-Klipper_Klipper_firmware_12345-if00
+
+[printer]
+kinematics: cartesian
+max_velocity: 300
+max_accel: 3000
+max_z_velocity: 5
+max_z_accel: 100
+
+[board_pins]
+aliases:
+    # EXP1 header
+    EXP1_1=PB5,  EXP1_3=PA9,   EXP1_5=PA10, EXP1_7=PB8, EXP1_9=<GND>,
+    EXP1_2=PA15, EXP1_4=<RST>, EXP1_6=PB9,  EXP1_8=PD6, EXP1_10=<5V>
+
+# See the sample-lcd.cfg file for definitions of common LCD displays.

config/generic-bigtreetech-skr-mini-mz.cfg

@@ -0,0 +1,131 @@
+# This file contains common pin mappings for the BIGTREETECH SKR mini
+# MZ v1.0. To use this config, the firmware should be compiled for the
+# STM32F103 with a "28KiB bootloader" and USB communication. Also,
+# select "Enable extra low-level configuration options" and configure
+# "GPIO pins to set at micro-controller startup" to "!PA14".
+
+# The "make flash" command does not work on the SKR mini MZ. Instead,
+# after running "make", copy the generated "out/klipper.bin" file to a
+# file named "firmware.bin" on an SD card and then restart the SKR
+# mini MZ with that SD card.
+
+# See docs/Config_Reference.md for a description of parameters.
+
+# Note: This board has a design flaw in its thermistor circuits that
+# cause inaccurate temperatures (most noticeable at low temperatures).
+
+[stepper_x]
+step_pin: PB13
+dir_pin: !PB12
+enable_pin: !PB14
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^PC0
+position_endstop: 0
+position_max: 235
+homing_speed: 50
+
+[tmc2209 stepper_x]
+uart_pin: PC11
+tx_pin: PC10
+uart_address: 0
+run_current: 0.580
+stealthchop_threshold: 999999
+
+[stepper_y]
+step_pin: PB10
+dir_pin: !PB2
+enable_pin: !PB11
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^PC1
+position_endstop: 0
+position_max: 235
+homing_speed: 50
+
+[tmc2209 stepper_y]
+uart_pin: PC11
+tx_pin: PC10
+uart_address: 1
+run_current: 0.580
+stealthchop_threshold: 999999
+
+[stepper_z]
+step_pin: PB0
+dir_pin: PC5
+enable_pin: !PB1
+microsteps: 16
+rotation_distance: 8
+endstop_pin: ^PC2
+position_endstop: 0.0
+position_max: 250
+
+[tmc2209 stepper_z]
+uart_pin: PC11
+tx_pin: PC10
+uart_address: 2
+run_current: 0.580
+stealthchop_threshold: 999999
+
+[extruder]
+step_pin: PB3
+dir_pin: !PB4
+enable_pin: !PD2
+microsteps: 16
+rotation_distance: 33.500
+nozzle_diameter: 0.400
+filament_diameter: 1.750
+heater_pin: PC8
+sensor_type: EPCOS 100K B57560G104F
+sensor_pin: PA0
+control: pid
+pid_Kp: 21.527
+pid_Ki: 1.063
+pid_Kd: 108.982
+min_temp: 0
+max_temp: 250
+
+[tmc2209 extruder]
+uart_pin: PC11
+tx_pin: PC10
+uart_address: 3
+run_current: 0.650
+stealthchop_threshold: 999999
+
+[heater_bed]
+heater_pin: PC9
+sensor_type: ATC Semitec 104GT-2
+sensor_pin: PC3
+control: pid
+pid_Kp: 54.027
+pid_Ki: 0.770
+pid_Kd: 948.182
+min_temp: 0
+max_temp: 130
+
+[heater_fan heatbreak_cooling_fan]
+pin: PC7
+
+[fan]
+pin: PC6
+
+[mcu]
+serial: /dev/serial/by-id/usb-Klipper_Klipper_firmware_12345-if00
+
+[printer]
+kinematics: cartesian
+max_velocity: 300
+max_accel: 3000
+max_z_velocity: 5
+max_z_accel: 100
+
+[static_digital_output usb_pullup_enable]
+pins: !PA14
+
+[board_pins]
+aliases:
+    # EXP1 header
+    EXP1_1=PB5,  EXP1_3=PA9,   EXP1_5=PA10, EXP1_7=PB8,  EXP1_9=<GND>,
+    EXP1_2=PA15, EXP1_4=<RST>, EXP1_6=PB9,  EXP1_8=PB15, EXP1_10=<5V>
+
+# See the sample-lcd.cfg file for definitions of common LCD displays.

config/generic-bigtreetech-skr-mini.cfg

@@ -0,0 +1,95 @@
+# This file contains common pin mappings for the BIGTREETECH SKR
+# MINI. To use this config, the firmware should be compiled for the
+# STM32F103 with a "28KiB bootloader" and USB communication.
+
+# The "make flash" command does not work on the SKR mini. Instead,
+# after running "make", copy the generated "out/klipper.bin" file to a
+# file named "firmware.bin" on an SD card and then restart the SKR
+# mini with that SD card.
+
+# See docs/Config_Reference.md for a description of parameters.
+
+# Note: This board has a design flaw in its thermistor circuits that
+# cause inaccurate temperatures (most noticeable at low temperatures).
+
+[stepper_x]
+step_pin: PC6
+dir_pin: PC7
+enable_pin: !PB15
+microsteps: 16
+rotation_distance: 40
+endstop_pin: PC2 # X+ is PA2
+position_endstop: 0
+position_max: 200
+homing_speed: 50
+
+[stepper_y]
+step_pin: PB13
+dir_pin: PB14
+enable_pin: !PB12
+microsteps: 16
+rotation_distance: 40
+endstop_pin: PC1 # Y+ is PA1
+position_endstop: 0
+position_max: 200
+homing_speed: 50
+
+[stepper_z]
+step_pin: PB10
+dir_pin: PB11
+enable_pin: !PB2
+microsteps: 16
+rotation_distance: 8
+endstop_pin: PC0 # Z+ is PC3
+position_endstop: 0.5
+position_max: 200
+
+[extruder]
+step_pin: PC5
+dir_pin: PB0
+enable_pin: !PC4
+microsteps: 16
+rotation_distance: 33.500
+nozzle_diameter: 0.400
+filament_diameter: 1.750
+heater_pin: PA8
+sensor_type: EPCOS 100K B57560G104F
+sensor_pin: PA0
+control: pid
+pid_Kp: 22.2
+pid_Ki: 1.08
+pid_Kd: 114
+min_temp: 0
+max_temp: 250
+
+#[heater_bed]
+#heater_pin: PC9
+#sensor_type: ATC Semitec 104GT-2
+#sensor_pin: PB1
+#control: watermark
+#min_temp: 0
+#max_temp: 130
+
+[fan]
+pin: PC8
+
+[mcu]
+serial: /dev/serial/by-id/usb-Klipper_Klipper_firmware_12345-if00
+
+[printer]
+kinematics: cartesian
+max_velocity: 300
+max_accel: 3000
+max_z_velocity: 5
+max_z_accel: 100
+
+[board_pins]
+aliases:
+    # EXP1 header
+    EXP1_1=PC10, EXP1_3=PB6,  EXP1_5=PC13, EXP1_7=PC15, EXP1_9=<GND>,
+    EXP1_2=PC11, EXP1_4=PC12, EXP1_6=PB7,  EXP1_8=PC14, EXP1_10=<5V>,
+    # EXP2 header
+    EXP2_1=PB4, EXP2_3=PD2,  EXP2_5=PB8, EXP2_7=PB9,   EXP2_9=<GND>,
+    EXP2_2=PB3, EXP2_4=PA15, EXP2_6=PB5, EXP2_8=<RST>, EXP2_10=<NC>
+
+# See the sample-lcd.cfg file for definitions of common LCD displays.

config/generic-bigtreetech-skr-pico-v1.0.cfg

@@ -0,0 +1,135 @@
+# This file contains common pin mappings for the BIGTREETECH SKR Pico V1.0
+# To use this config, the firmware should be compiled for the RP2040 with
+# USB communication.
+
+# The "make flash" command does not work on the SKR Pico V1.0. Instead,
+# after running "make", copy the generated "out/klipper.uf2" file
+# to the mass storage device in RP2040 boot mode
+
+# See docs/Config_Reference.md for a description of parameters.
+
+[stepper_x]
+step_pin: gpio11
+dir_pin: !gpio10
+enable_pin: !gpio12
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^gpio4
+position_endstop: 0
+position_max: 235
+homing_speed: 50
+
+[tmc2209 stepper_x]
+uart_pin: gpio9
+tx_pin: gpio8
+uart_address: 0
+run_current: 0.580
+stealthchop_threshold: 999999
+
+[stepper_y]
+step_pin: gpio6
+dir_pin: !gpio5
+enable_pin: !gpio7
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^gpio3
+position_endstop: 0
+position_max: 235
+homing_speed: 50
+
+[tmc2209 stepper_y]
+uart_pin: gpio9
+tx_pin: gpio8
+uart_address: 2
+run_current: 0.580
+stealthchop_threshold: 999999
+
+[stepper_z]
+step_pin: gpio19
+dir_pin: gpio28
+enable_pin: !gpio2
+microsteps: 16
+rotation_distance: 8
+endstop_pin: ^gpio25
+position_endstop: 0.0
+position_max: 250
+
+[tmc2209 stepper_z]
+uart_pin: gpio9
+tx_pin: gpio8
+uart_address: 1
+run_current: 0.580
+stealthchop_threshold: 999999
+
+[extruder]
+step_pin: gpio14
+dir_pin: !gpio13
+enable_pin: !gpio15
+microsteps: 16
+rotation_distance: 33.500
+nozzle_diameter: 0.400
+filament_diameter: 1.750
+heater_pin: gpio23
+sensor_type: EPCOS 100K B57560G104F
+sensor_pin: gpio27
+control: pid
+pid_Kp: 21.527
+pid_Ki: 1.063
+pid_Kd: 108.982
+min_temp: 0
+max_temp: 250
+
+[tmc2209 extruder]
+uart_pin: gpio9
+tx_pin: gpio8
+uart_address: 3
+run_current: 0.650
+stealthchop_threshold: 999999
+
+[heater_bed]
+heater_pin: gpio21
+sensor_type: ATC Semitec 104GT-2
+sensor_pin: gpio26
+control: pid
+pid_Kp: 54.027
+pid_Ki: 0.770
+pid_Kd: 948.182
+min_temp: 0
+max_temp: 130
+
+[fan]
+pin: gpio17
+
+[heater_fan heatbreak_cooling_fan]
+pin: gpio18
+
+[heater_fan controller_fan]
+pin: gpio20
+
+[temperature_sensor pico]
+sensor_type: temperature_mcu
+
+[mcu]
+serial: /dev/serial/by-id/usb-Klipper_Klipper_firmware_12345-if00
+
+[printer]
+kinematics: cartesian
+max_velocity: 300
+max_accel: 3000
+max_z_velocity: 5
+max_z_accel: 100
+
+[neopixel board_neopixel]
+pin: gpio24
+chain_count: 1
+color_order: GRB
+initial_RED: 0.3
+initial_GREEN: 0.3
+initial_BLUE: 0.3
+
+#[bltouch]
+#sensor_pin: gpio22
+#control_pin: gpio29
+
+#[filament_switch_sensor runout_sensor]
+#switch_pin: ^gpio16

config/generic-bigtreetech-skr-pro.cfg

@@ -0,0 +1,202 @@
+# This file contains common pin mappings for the BigTreeTech SKR PRO.
+# To use this config, the firmware should be compiled for the
+# STM32F407 with a "32KiB bootloader".
+
+# The "make flash" command does not work on the SKR PRO. Instead,
+# after running "make", copy the generated "out/klipper.bin" file to a
+# file named "firmware.bin" on an SD card and then restart the SKR PRO
+# with that SD card.
+
+# See docs/Config_Reference.md for a description of parameters.
+
+[stepper_x]
+step_pin: PE9
+dir_pin: PF1
+enable_pin: !PF2
+microsteps: 16
+rotation_distance: 40
+endstop_pin: PB10
+position_endstop: 0
+position_max: 200
+homing_speed: 50
+
+[stepper_y]
+step_pin: PE11
+dir_pin: PE8
+enable_pin: !PD7
+microsteps: 16
+rotation_distance: 40
+endstop_pin: PE12
+position_endstop: 0
+position_max: 200
+homing_speed: 50
+
+[stepper_z]
+step_pin: PE13
+dir_pin: PC2
+enable_pin: !PC0
+microsteps: 16
+rotation_distance: 8
+endstop_pin: PG8
+position_endstop: 0.5
+position_max: 200
+
+[extruder]
+step_pin: PE14
+dir_pin: PA0
+enable_pin: !PC3
+microsteps: 16
+rotation_distance: 33.500
+nozzle_diameter: 0.400
+filament_diameter: 1.750
+heater_pin: PB1 # Heat0
+sensor_pin:  PF4 # T1 Header
+sensor_type: EPCOS 100K B57560G104F
+control: pid
+pid_Kp: 22.2
+pid_Ki: 1.08
+pid_Kd: 114
+min_temp: 0
+max_temp: 250
+
+#[extruder1]
+#step_pin: PD15
+#dir_pin: PE7
+#enable_pin: !PA3
+#heater_pin: PD14 # Heat1
+#sensor_pin: PF5 # T2
+#...
+
+#[extruder2]
+#step_pin: PD13
+#dir_pin: PG9
+#enable_pin: !PF0
+#heater_pin: PB0 # Heat2
+#sensor_pin: PF6 # T3
+#...
+
+[heater_bed]
+heater_pin: PD12
+sensor_pin: PF3 # T0
+sensor_type: ATC Semitec 104GT-2
+control: watermark
+min_temp: 0
+max_temp: 130
+
+[fan]
+pin: PC8
+
+[heater_fan fan1]
+pin: PE5
+
+#[heater_fan fan2]
+#pin: PE6
+
+[mcu]
+serial: /dev/serial/by-id/usb-Klipper_Klipper_firmware_12345-if00
+
+[printer]
+kinematics: cartesian
+max_velocity: 300
+max_accel: 3000
+max_z_velocity: 5
+max_z_accel: 100
+
+
+########################################
+# TMC2208 configuration
+########################################
+
+#[tmc2208 stepper_x]
+#uart_pin: PC13
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2208 stepper_y]
+#uart_pin: PE3
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2208 stepper_z]
+#uart_pin: PE1
+#run_current: 0.650
+#stealthchop_threshold: 999999
+
+#[tmc2208 extruder]
+#uart_pin: PD4
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2208 extruder1]
+#uart_pin: PD1
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2208 extruder2]
+#uart_pin: PD6
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+
+########################################
+# TMC2130 configuration
+########################################
+
+#[tmc2130 stepper_x]
+#cs_pin: PA15
+#spi_bus: spi3a
+##diag1_pin: PB10
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2130 stepper_y]
+#cs_pin: PB8
+#spi_bus: spi3a
+##diag1_pin: PE12
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2130 stepper_z]
+#cs_pin: PB9
+#spi_bus: spi3a
+##diag1_pin: PG8
+#run_current: 0.650
+#stealthchop_threshold: 999999
+
+#[tmc2130 extruder]
+#cs_pin: PB3
+#spi_bus: spi3a
+##diag1_pin: PE15
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2130 extruder1]
+#cs_pin: PG15
+#spi_bus: spi3a
+##diag1_pin: PE10
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2130 extruder2]
+#cs_pin: PG12
+#spi_bus: spi3a
+##diag1_pin: PG5
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+
+########################################
+# EXP1 / EXP2 (display) pins
+########################################
+
+[board_pins]
+aliases:
+    # EXP1 header
+    EXP1_1=PG4, EXP1_3=PD11, EXP1_5=PG2, EXP1_7=PG6, EXP1_9=<GND>,
+    EXP1_2=PA8, EXP1_4=PD10, EXP1_6=PG3, EXP1_8=PG7, EXP1_10=<5V>,
+    # EXP2 header
+    EXP2_1=PB14, EXP2_3=PG10, EXP2_5=PF11, EXP2_7=PF12,  EXP2_9=<GND>,
+    EXP2_2=PB13, EXP2_4=PB12, EXP2_6=PB15, EXP2_8=<RST>, EXP2_10=PF13
+    # Pins EXP2_1, EXP2_6, EXP2_2 are also MISO, MOSI, SCK of bus "spi2"
+
+# See the sample-lcd.cfg file for definitions of common LCD displays.

config/generic-bigtreetech-skr-v1.1.cfg

@@ -0,0 +1,95 @@
+# This file contains common pin mappings for the BIGTREETECH SKR V1.1
+# board. To use this config, the firmware should be compiled for the
+# LPC1768.
+
+# See docs/Config_Reference.md for a description of parameters.
+
+[stepper_x]
+step_pin: P0.4
+dir_pin: !P0.5
+enable_pin: !P4.28
+microsteps: 16
+rotation_distance: 8
+endstop_pin: P1.29
+position_endstop: 0
+position_max: 200
+homing_speed: 50
+
+[stepper_y]
+step_pin: P2.1
+dir_pin: P2.2
+enable_pin: !P2.0
+microsteps: 16
+rotation_distance: 8
+endstop_pin: P1.27
+position_endstop: 0
+position_max: 200
+homing_speed: 50
+
+[stepper_z]
+step_pin: P0.20
+dir_pin: P0.21
+enable_pin: !P0.19
+microsteps: 16
+rotation_distance: 40
+endstop_pin: !P1.25
+position_endstop: 0.5
+position_max: 200
+
+#[stepper_z1]
+#step_pin: P0.1
+#dir_pin: P0.0
+#enable_pin: !P0.10
+#position_endstop: 0.5
+#position_max: 200
+
+[extruder]
+step_pin: P0.11
+dir_pin: P2.13
+enable_pin: !P2.12
+microsteps: 16
+rotation_distance: 33.500
+nozzle_diameter: 0.400
+filament_diameter: 1.750
+heater_pin: P2.7
+sensor_type: EPCOS 100K B57560G104F
+sensor_pin: P0.24
+control: pid
+pid_Kp: 22.2
+pid_Ki: 1.08
+pid_Kd: 114
+min_temp: 0
+max_temp: 250
+
+[heater_bed]
+heater_pin: P2.5
+sensor_type: ATC Semitec 104GT-2
+sensor_pin: P0.23
+control: watermark
+min_temp: 0
+max_temp: 130
+
+[fan]
+pin: P2.3
+
+[mcu]
+serial: /dev/serial/by-id/usb-Klipper_Klipper_firmware_12345-if00
+
+[printer]
+kinematics: cartesian
+max_velocity: 300
+max_accel: 3000
+max_z_velocity: 5
+max_z_accel: 100
+
+[board_pins]
+aliases:
+    # EXP1 header
+    EXP1_1=P1.30, EXP1_3=P0.18, EXP1_5=P0.15, EXP1_7=<NC>, EXP1_9=<GND>,
+    EXP1_2=P2.11, EXP1_4=P0.16, EXP1_6=<NC>,  EXP1_8=<NC>, EXP1_10=<5V>,
+    # EXP2 header
+    EXP2_1=P0.17, EXP2_3=P3.26, EXP2_5=P3.25, EXP2_7=P1.31, EXP2_9=<GND>,
+    EXP2_2=P0.15, EXP2_4=P1.23, EXP2_6=P0.18, EXP2_8=<RST>, EXP2_10=<NC>
+    # Pins EXP2_1, EXP2_6, EXP2_2 are also MISO, MOSI, SCK of bus "ssp0"
+
+# See the sample-lcd.cfg file for definitions of common LCD displays.

config/generic-bigtreetech-skr-v1.3.cfg

@@ -0,0 +1,189 @@
+# This file contains common pin mappings for the BIGTREETECH SKR V1.3
+# board. To use this config, the firmware should be compiled for the
+# LPC1768.
+
+# See docs/Config_Reference.md for a description of parameters.
+
+[stepper_x]
+step_pin: P2.2
+dir_pin: !P2.6
+enable_pin: !P2.1
+microsteps: 16
+rotation_distance: 40
+endstop_pin: P1.29  # P1.28 for X-max
+position_endstop: 0
+position_max: 320
+homing_speed: 50
+
+[stepper_y]
+step_pin: P0.19
+dir_pin: !P0.20
+enable_pin: !P2.8
+microsteps: 16
+rotation_distance: 40
+endstop_pin: P1.27  # P1.26 for Y-max
+position_endstop: 0
+position_max: 300
+homing_speed: 50
+
+[stepper_z]
+step_pin: P0.22
+dir_pin: P2.11
+enable_pin: !P0.21
+microsteps: 16
+rotation_distance: 8
+endstop_pin: P1.25  # P1.24 for Z-max
+position_endstop: 0.5
+position_max: 400
+
+[extruder]
+step_pin: P2.13
+dir_pin: !P0.11
+enable_pin: !P2.12
+microsteps: 16
+rotation_distance: 33.500
+nozzle_diameter: 0.400
+filament_diameter: 1.750
+heater_pin: P2.7
+sensor_type: EPCOS 100K B57560G104F
+sensor_pin: P0.24
+control: pid
+pid_Kp: 22.2
+pid_Ki: 1.08
+pid_Kd: 114
+min_temp: 0
+max_temp: 260
+
+#[extruder1]
+#step_pin: P0.1
+#dir_pin: P0.0
+#enable_pin: !P0.10
+#heater_pin: P2.4
+#sensor_pin: P0.25
+#...
+
+[heater_bed]
+heater_pin: P2.5
+sensor_type: ATC Semitec 104GT-2
+sensor_pin: P0.23
+control: watermark
+min_temp: 0
+max_temp: 130
+
+[fan]
+pin: P2.3
+
+[mcu]
+serial: /dev/serial/by-id/usb-Klipper_Klipper_firmware_12345-if00
+
+[printer]
+kinematics: cartesian
+max_velocity: 200
+max_accel: 2000
+max_z_velocity: 25
+max_z_accel: 100
+
+
+########################################
+# TMC2208 configuration
+########################################
+
+# For TMC2208 UART
+#   1) Remove all of the jumpers below the stepper drivers
+#   2) Place jumpers on the red pin headers labeled XUART (XUART, YUART etc.)
+
+#[tmc2208 stepper_x]
+#uart_pin: P1.17
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2208 stepper_y]
+#uart_pin: P1.15
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2208 stepper_z]
+#uart_pin: P1.10
+#run_current: 0.650
+#stealthchop_threshold: 999999
+
+#[tmc2208 extruder]
+#uart_pin: P1.8
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2208 extruder1]
+#uart_pin: P1.1
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+
+########################################
+# TMC2130 configuration
+########################################
+
+# For TMC SPI
+#   1) Place jumpers on all the red pin headers under the stepper drivers
+#   2) Remove jumpers from the red pin headers labeled XUART (XUART, YUART etc.)
+
+#[tmc2130 stepper_x]
+#cs_pin: P1.17
+#spi_software_miso_pin: P0.5
+#spi_software_mosi_pin: P4.28
+#spi_software_sclk_pin: P0.4
+##diag1_pin: P1.29
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2130 stepper_y]
+#cs_pin: P1.15
+#spi_software_miso_pin: P0.5
+#spi_software_mosi_pin: P4.28
+#spi_software_sclk_pin: P0.4
+##diag1_pin: P1.27
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2130 stepper_z]
+#cs_pin: P1.10
+#spi_software_miso_pin: P0.5
+#spi_software_mosi_pin: P4.28
+#spi_software_sclk_pin: P0.4
+##diag1_pin: P1.25
+#run_current: 0.650
+#stealthchop_threshold: 999999
+
+#[tmc2130 extruder]
+#cs_pin: P1.8
+#spi_software_miso_pin: P0.5
+#spi_software_mosi_pin: P4.28
+#spi_software_sclk_pin: P0.4
+##diag1_pin: P1.28
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2130 extruder1]
+#cs_pin: P1.1
+#spi_software_miso_pin: P0.5
+#spi_software_mosi_pin: P4.28
+#spi_software_sclk_pin: P0.4
+##diag1_pin: P1.26
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+
+########################################
+# EXP1 / EXP2 (display) pins
+########################################
+
+[board_pins]
+aliases:
+    # EXP1 header
+    EXP1_1=P1.30, EXP1_3=P1.18, EXP1_5=P1.20, EXP1_7=P1.22, EXP1_9=<GND>,
+    EXP1_2=P0.28, EXP1_4=P1.19, EXP1_6=P1.21, EXP1_8=P1.23, EXP1_10=<5V>,
+    # EXP2 header
+    EXP2_1=P0.17, EXP2_3=P3.26, EXP2_5=P3.25, EXP2_7=P1.31, EXP2_9=<GND>,
+    EXP2_2=P0.15, EXP2_4=P0.16, EXP2_6=P0.18, EXP2_8=<RST>, EXP2_10=<NC>
+    # Pins EXP2_1, EXP2_6, EXP2_2 are also MISO, MOSI, SCK of bus "ssp0"
+
+# See the sample-lcd.cfg file for definitions of common LCD displays.

config/generic-bigtreetech-skr-v1.4.cfg

@@ -0,0 +1,184 @@
+# This file contains common pin mappings for the BIGTREETECH SKR V1.4
+# board. To use this config, the firmware should be compiled for the
+# LPC1768 or LPC1769(Turbo).
+
+# See docs/Config_Reference.md for a description of parameters.
+
+[stepper_x]
+step_pin: P2.2
+dir_pin: P2.6
+enable_pin: !P2.1
+microsteps: 16
+rotation_distance: 40
+endstop_pin: !P1.29
+position_endstop: 0
+position_max: 235
+homing_speed: 50
+
+[stepper_y]
+step_pin: P0.19
+dir_pin: P0.20
+enable_pin: !P2.8
+microsteps: 16
+rotation_distance: 40
+endstop_pin: !P1.28
+position_endstop: 0
+position_max: 235
+homing_speed: 50
+
+[stepper_z]
+step_pin: P0.22
+dir_pin: !P2.11
+enable_pin: !P0.21
+microsteps: 16
+rotation_distance: 8
+endstop_pin: !P1.27
+position_endstop: 0.0
+position_max: 300
+
+[extruder]
+step_pin: P2.13
+dir_pin: !P0.11
+enable_pin: !P2.12
+microsteps: 16
+rotation_distance: 33.500
+nozzle_diameter: 0.400
+filament_diameter: 1.750
+heater_pin: P2.7
+sensor_type: EPCOS 100K B57560G104F
+sensor_pin: P0.24
+control: pid
+pid_Kp: 22.2
+pid_Ki: 1.08
+pid_Kd: 114
+min_temp: 0
+max_temp: 260
+
+#[extruder1]
+#step_pin: P1.15
+#dir_pin: P1.14
+#enable_pin: !P1.16
+#heater_pin: P2.4
+#sensor_pin: P0.23
+#...
+
+[heater_bed]
+heater_pin: P2.5
+sensor_type: EPCOS 100K B57560G104F
+sensor_pin: P0.25
+control: pid
+pid_Kp: 54.027
+pid_Ki: 0.770
+pid_Kd: 948.182
+min_temp: 0
+max_temp: 130
+
+[fan]
+pin: P2.3
+
+[mcu]
+serial: /dev/serial/by-id/usb-Klipper_Klipper_firmware_12345-if00
+
+[printer]
+kinematics: cartesian
+max_velocity: 400
+max_accel: 500
+max_z_velocity: 10
+max_z_accel: 100
+
+
+########################################
+# TMC2208 configuration
+########################################
+
+#[tmc2208 stepper_x]
+#uart_pin: P1.10
+#run_current: 0.800
+#stealthchop_threshold: 999999
+#
+#[tmc2208 stepper_y]
+#uart_pin: P1.9
+#run_current: 0.800
+#stealthchop_threshold: 999999
+#
+#[tmc2208 stepper_z]
+#uart_pin: P1.8
+#run_current: 0.650
+#stealthchop_threshold: 999999
+#
+#[tmc2208 extruder]
+#uart_pin: P1.4
+#run_current: 0.800
+#stealthchop_threshold: 999999
+#
+#[tmc2208 extruder1]
+#uart_pin: P1.1
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+
+########################################
+# TMC2130 configuration
+########################################
+
+#[tmc2130 stepper_x]
+#cs_pin: P1.10
+#spi_software_miso_pin: P0.5
+#spi_software_mosi_pin: P1.17
+#spi_software_sclk_pin: P0.4
+#run_current: 0.800
+#stealthchop_threshold: 999999
+#diag1_pin: P1.29
+
+#[tmc2130 stepper_y]
+#cs_pin: P1.9
+#spi_software_miso_pin: P0.5
+#spi_software_mosi_pin: P1.17
+#spi_software_sclk_pin: P0.4
+#run_current: 0.800
+#stealthchop_threshold: 999999
+#diag1_pin: P1.28
+
+#[tmc2130 stepper_z]
+#cs_pin: P1.8
+#spi_software_miso_pin: P0.5
+#spi_software_mosi_pin: P1.17
+#spi_software_sclk_pin: P0.4
+#run_current: 0.650
+#stealthchop_threshold: 999999
+#diag1_pin: P1.27
+
+#[tmc2130 extruder]
+#cs_pin: P1.4
+#spi_software_miso_pin: P0.5
+#spi_software_mosi_pin: P1.17
+#spi_software_sclk_pin: P0.4
+#run_current: 0.800
+#stealthchop_threshold: 999999
+#diag1_pin: P1.26
+
+#[tmc2130 extruder1]
+#cs_pin: P1.1
+#spi_software_miso_pin: P0.5
+#spi_software_mosi_pin: P1.17
+#spi_software_sclk_pin: P0.4
+#run_current: 0.800
+#stealthchop_threshold: 999999
+#diag1_pin: P1.25
+
+
+########################################
+# EXP1 / EXP2 (display) pins
+########################################
+
+[board_pins]
+aliases:
+    # EXP1 header
+    EXP1_1=P1.30, EXP1_3=P1.18, EXP1_5=P1.20, EXP1_7=P1.22, EXP1_9=<GND>,
+    EXP1_2=P0.28, EXP1_4=P1.19, EXP1_6=P1.21, EXP1_8=P1.23, EXP1_10=<5V>,
+    # EXP2 header
+    EXP2_1=P0.17, EXP2_3=P3.26, EXP2_5=P3.25, EXP2_7=P1.31, EXP2_9=<GND>,
+    EXP2_2=P0.15, EXP2_4=P0.16, EXP2_6=P0.18, EXP2_8=<RST>, EXP2_10=<NC>
+    # Pins EXP2_1, EXP2_6, EXP2_2 are also MISO, MOSI, SCK of bus "ssp0"
+
+# See the sample-lcd.cfg file for definitions of common LCD displays.

config/generic-cramps.cfg

@@ -0,0 +1,92 @@
+# This file contains an example configuration for a Beaglebone PRU
+# micro-controller attached to a CRAMPS board.
+
+# THIS FILE HAS NOT BEEN TESTED - PROCEED WITH CAUTION!
+
+# NOTE: Klipper does not alter the input/output state of the
+# Beaglebone pins and it does not control their pull-up resistors.  In
+# order to set the pin state one must use a "device tree overlay" or
+# use the config-pin program.
+
+# See docs/Config_Reference.md for a description of parameters.
+
+[stepper_x]
+step_pin: gpio0_23
+dir_pin: gpio1_12
+enable_pin: !gpio1_18
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^gpio2_3
+position_endstop: 0
+position_max: 200
+homing_speed: 50
+
+[stepper_y]
+step_pin: gpio1_15
+dir_pin: gpio0_26
+enable_pin: !gpio1_18
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^gpio2_4
+position_endstop: 0
+position_max: 200
+homing_speed: 50
+
+[stepper_z]
+step_pin: gpio0_22
+dir_pin: gpio2_1
+enable_pin: !gpio1_18
+microsteps: 16
+rotation_distance: 8
+endstop_pin: ^gpio0_31
+position_endstop: 0
+position_max: 200
+
+[extruder]
+step_pin: gpio1_19
+dir_pin: gpio1_28
+enable_pin: !gpio1_18
+microsteps: 16
+rotation_distance: 33.500
+nozzle_diameter: 0.400
+filament_diameter: 1.750
+heater_pin: gpio1_16
+sensor_type: EPCOS 100K B57560G104F
+pullup_resistor: 2000
+sensor_pin: host:analog5
+control: pid
+pid_Kp: 22.2
+pid_Ki: 1.08
+pid_Kd: 114
+min_temp: 0
+max_temp: 250
+
+[heater_bed]
+heater_pin: gpio1_13
+sensor_type: EPCOS 100K B57560G104F
+pullup_resistor: 2000
+sensor_pin: host:analog4
+control: watermark
+min_temp: 0
+max_temp: 130
+
+[fan]
+pin: gpio0_20
+
+[mcu]
+serial: /dev/rpmsg_pru30
+
+[mcu host]
+serial: /tmp/klipper_host_mcu
+
+[printer]
+kinematics: cartesian
+max_velocity: 300
+max_accel: 3000
+max_z_velocity: 5
+max_z_accel: 100
+
+[output_pin machine_enable]
+pin: gpio1_17
+value: 1
+shutdown_value: 0

config/generic-creality-v4.2.10.cfg

@@ -0,0 +1,143 @@
+# This file contains pin mappings for the Creality "v4.2.10" board. To
+# use this config, during "make menuconfig" select the STM32F103 with
+# a "28KiB bootloader" and serial (on USART1 PA10/PA9) communication.
+
+# If you prefer a direct serial connection, in "make menuconfig"
+# select "Enable extra low-level configuration options" and select
+# serial (on USART3 PB11/PB10), which is broken out on the 10 pin IDC
+# cable used for the LCD module as follows:
+# 3: Tx, 4: Rx, 9: GND, 10: VCC
+
+# Flash this firmware by copying "out/klipper.bin" to a SD card and
+# turning on the printer with the card inserted. The firmware
+# filename must end in ".bin" and must not match the last filename
+# that was flashed.
+
+# See docs/Config_Reference.md for a description of parameters.
+
+[stepper_x]
+step_pin: PC2
+dir_pin: !PB9
+enable_pin: !PC3
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^!PA3
+position_endstop: 0
+position_max: 220
+homing_speed: 50
+
+[stepper_y]
+step_pin: PB8
+dir_pin: !PB7
+enable_pin: !PC3
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^!PA7
+position_endstop: 0
+position_max: 240
+
+[stepper_z]
+step_pin: PB6
+dir_pin: !PB5
+enable_pin: !PC3
+microsteps: 16
+rotation_distance: 2.75
+endstop_pin: ^!PA5
+position_endstop: 0.0
+position_max: 200
+
+[extruder]
+step_pin: PB4
+dir_pin: !PB3
+enable_pin: !PC3
+microsteps: 16
+rotation_distance: 23.0
+nozzle_diameter: 0.400
+filament_diameter: 1.750
+heater_pin: PA0
+sensor_type: EPCOS 100K B57560G104F
+sensor_pin: PC5
+control: pid
+pid_Kp: 21.527
+pid_Ki: 1.063
+pid_Kd: 108.982
+min_temp: 0
+max_temp: 250
+
+# K-FAN1
+[fan]
+pin: PA2
+
+[heater_bed]
+heater_pin: PA1
+sensor_type: EPCOS 100K B57560G104F
+sensor_pin: PC4
+control: pid
+pid_Kp: 54.027
+pid_Ki: 0.770
+pid_Kd: 948.182
+min_temp: 0
+max_temp: 130
+
+[mcu]
+serial: /dev/serial/by-id/usb-1a86_USB_Serial-if00-port0
+restart_method: command
+
+[printer]
+kinematics: cartesian
+max_velocity: 200
+max_accel: 1500
+max_z_velocity: 20
+max_z_accel: 500
+
+# [filament_switch_sensor spool]
+# pause_on_runout: True
+# switch_pin: ^!PA6
+
+# K-FAN2
+# [fan_generic k_fan2]
+# pin: PC0
+
+# K-FAN3
+# [fan_generic k_fan3]
+# pin: PC1
+
+# [temperature_sensor mcu_temp]
+# sensor_type: temperature_mcu
+# min_temp: 0
+# max_temp: 100
+
+
+# Neopixel LED support
+# [neopixel led_neopixel]
+# pin: PC14
+
+# BL-touch
+# [bltouch]
+# control_pin: PB0
+# sensor_pin: PB1
+
+# TMC Uart Mod Pins:
+# https://github.com/adelyser/Marlin-CR30/wiki
+# [tmc2208 stepper_x]
+# uart_pin: PB0
+#
+# [tmc2208 stepper_y]
+# uart_pin: PB1
+#
+# [tmc2208 stepper_z]
+# uart_pin: PA13
+#
+# [tmc2208 extruder]
+# uart_pin: PA14
+
+# [display]
+# lcd_type: st7920
+# cs_pin: PB12
+# sclk_pin: PB13
+# sid_pin: PB15
+# encoder_pins: ^PB14, ^PB10
+# click_pin: ^!PB2
+
+# [output_pin beeper]
+# pin: PC6

config/generic-creality-v4.2.7.cfg

@@ -0,0 +1,98 @@
+# This file contains pin mappings for the Creality "v4.2.7" board. To
+# use this config, during "make menuconfig" select the STM32F103 with
+# a "28KiB bootloader" and serial (on USART1 PA10/PA9) communication.
+
+# If you prefer a direct serial connection, in "make menuconfig"
+# select "Enable extra low-level configuration options" and select
+# serial (on USART3 PB11/PB10), which is broken out on the 10 pin IDC
+# cable used for the LCD module as follows:
+# 3: Tx, 4: Rx, 9: GND, 10: VCC
+
+# Flash this firmware by copying "out/klipper.bin" to a SD card and
+# turning on the printer with the card inserted. The firmware
+# filename must end in ".bin" and must not match the last filename
+# that was flashed.
+
+# See docs/Config_Reference.md for a description of parameters.
+
+[stepper_x]
+step_pin: PB9
+dir_pin: PC2
+enable_pin: !PC3
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^PA5
+position_endstop: 0
+position_max: 235
+homing_speed: 50
+
+[stepper_y]
+step_pin: PB7
+dir_pin: PB8
+enable_pin: !PC3
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^PA6
+position_endstop: 0
+position_max: 235
+homing_speed: 50
+
+[stepper_z]
+step_pin: PB5
+dir_pin: !PB6
+enable_pin: !PC3
+microsteps: 16
+rotation_distance: 8
+endstop_pin: ^PA7
+position_endstop: 0.0
+position_max: 250
+
+[extruder]
+max_extrude_only_distance: 100.0
+step_pin: PB3
+dir_pin: PB4
+enable_pin: !PC3
+microsteps: 16
+rotation_distance: 33.500
+nozzle_diameter: 0.400
+filament_diameter: 1.750
+heater_pin: PA1
+sensor_type: EPCOS 100K B57560G104F
+sensor_pin: PC5
+control: pid
+pid_Kp: 21.527
+pid_Ki: 1.063
+pid_Kd: 108.982
+min_temp: 0
+max_temp: 250
+
+[heater_bed]
+heater_pin: PA2
+sensor_type: EPCOS 100K B57560G104F
+sensor_pin: PC4
+control: pid
+pid_Kp: 54.027
+pid_Ki: 0.770
+pid_Kd: 948.182
+min_temp: 0
+max_temp: 130
+
+[fan]
+pin: PA0
+
+[mcu]
+serial: /dev/serial/by-id/usb-1a86_USB_Serial-if00-port0
+restart_method: command
+
+[printer]
+kinematics: cartesian
+max_velocity: 300
+max_accel: 3000
+max_z_velocity: 5
+max_z_accel: 100
+
+[board_pins]
+aliases:
+  EXP1_1=PC6,EXP1_3=PB10,EXP1_5=PB14,EXP1_7=PB12,EXP1_9=<GND>,
+  EXP1_2=PB2,EXP1_4=PB11,EXP1_6=PB13,EXP1_8=PB15,EXP1_10=<5V>,
+  PROBE_IN=PB0,PROBE_OUT=PB1,FIL_RUNOUT=PC6

config/generic-duet2-duex.cfg

@@ -0,0 +1,361 @@
+# This file contains common pin mappings for Duet2 Eth/Wifi boards
+# that have the Duex expansion board. To use this config, the firmware
+# should be compiled for the SAM4E8E.
+
+# See docs/Config_Reference.md for a description of parameters.
+
+## Drivers
+# Here are the pins for the 10 stepper drivers supported by a Duet2 board
+# | Drive |  DIR pin |  STEP pin |  ENDSTOP pin |  SPI EN pin |
+# |-------|----------|-----------|--------------|-------------|
+# | X     |  PD11    |  PD6      |  PC14        |  PD14       |
+# | Y     |  PD12    |  PD7      |  PA2         |  PC9        |
+# | Z     |  PD13    |  PD8      |  PD29        |  PC10       |
+# | E0    |  PA1     |  PD5      |  PD10        |  PC17       |
+# | E1    |  PD9     |  PD4      |  PC16        |  PC25       |
+# | E2    |  PD28    |  PD2      |  PE0*        |  PD23       |
+# | E3    |  PD22    |  PD1      |  PE1*        |  PD24       |
+# | E4    |  PD16    |  PD0      |  PE2*        |  PD25       |
+# | E5    |  PD17    |  PD3      |  PE3*        |  PD26       |
+# | E6    |  PC0     |  PD27     |  PA17*       |  PB14       |
+# Pins marked with asterisks (*) are only assigned to these functions
+# if no duex is connected. If a duex is connected, these endstops are
+# remapped to the SX1509 on the Duex (unfortunately they can't be used
+# as endstops in klipper, however one may use them as digital outs or
+# PWM outs). The SPI EN pins are required for the TMC2660 drivers (use
+# the SPI EN pin as 'cs_pin' in the respective config block). The
+# **enable pin for all steppers** is TMC_EN = !PC6.
+#
+## Fans
+# | FAN  |          PIN          |
+# |------|-----------------------|
+# | FAN0 |  PC23                 |
+# | FAN1 |  PC26                 |
+# | FAN2 |  PA0                  |
+# | FAN3 |  sx1509_duex:PIN_12*  |
+# | FAN4 |  sx1509_duex:PIN_7*   |
+# | FAN5 |  sx1509_duex:PIN_6*   |
+# | FAN6 |  sx1509_duex:PIN_5*   |
+# | FAN7 |  sx1509_duex:PIN_4*   |
+# | FAN8 |  sx1509_duex:PIN_15*  |
+# Pins marked with (*) assume the following sx1509 config section:
+#[sx1509 duex]
+#i2c_address: 62
+#
+## Heaters and Thermistors
+# | Extruder Drive |  HEAT pin |  TEMP pin |
+# |----------------|-----------|-----------|
+# | BED            |  PA19     |  PC13     |
+# | E0             |  PA20     |  PC15     |
+# | E1             |  PA16     |  PC12     |
+# | E2             |  PC3      |  PC29     |
+# | E3             |  PC5      |  PC30     |
+# | E4             |  PC8      |  PC31     |
+# | E5             |  PC11     |  PC27     |
+# | E6             |  PA15     |  PA18     |
+#
+## Misc pins
+# |    Name     |   Pin   |
+# |-------------|---------|
+# | ZProbe_IN   |  PC1    |
+# | PS_ON       |  PD15   |
+# | LED_ONBOARD |  PC2    |
+# | SPI0_CS0    |  PC24   |
+# | SPI0_CS1    |  PB2    |
+# | SPI0_CS2    |  PC18   |
+# | SPI0_CS3    |  PC19   |
+# | SPI0_CS4    |  PC20   |
+# | SPI0_CS5    |  PA24   |
+# | SPI0_CS6    |  PE1*   |
+# | SPI0_CS7    |  PE2*   |
+# | SPI0_CS8    |  PE3*   |
+# | SX1509_IRQ  |  PA17*  |
+# | SG_TST      |  PE0*   |
+# | ENC_SW      |  PA7    |
+# | ENC_A       |  PA8    |
+# | ENC_B       |  PC7    |
+# | LCD_DB7     |  PD18   |
+# | LCD_DB6     |  PD19   |
+# | LCD_DB5     |  PD20   |
+# | LCD_DB4     |  PD21   |
+# | LCD_RS      |  PC28   |
+# | LCD_E       |  PA25   |
+# Pins marked with one asterisk (*) replace E2_STOP-E6_STOP if a duex is present
+# For the remaining pins check the schematics provided here: https://github.com/T3P3/Duet
+
+[stepper_x]
+step_pin: PD6
+dir_pin: PD11
+enable_pin: !PC6
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^PC14
+position_endstop: 0
+position_max: 250
+
+[tmc2660 stepper_x]
+cs_pin: PD14 # X_SPI_EN Required for communication
+spi_bus: usart1 # All TMC2660 drivers are connected to USART1
+run_current: 1.000
+sense_resistor: 0.051
+idle_current_percent: 20
+
+[stepper_y]
+step_pin: PD7
+dir_pin: !PD12
+enable_pin: !PC6
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^PA2
+position_endstop: 0
+position_max: 210
+
+[tmc2660 stepper_y]
+cs_pin: PC9
+spi_bus: usart1
+run_current: 1.000
+sense_resistor: 0.051
+idle_current_percent: 20
+
+[stepper_z]
+step_pin: PD8
+dir_pin: PD13
+enable_pin: !PC6
+microsteps: 16
+rotation_distance: 8
+endstop_pin: ^PD29
+position_endstop: 0.5
+position_max: 200
+
+[tmc2660 stepper_z]
+cs_pin: PC10
+spi_bus: usart1
+run_current: 1.000
+sense_resistor: 0.051
+
+#On drive E4
+[stepper_z1]
+step_pin: PD0
+dir_pin: PD16
+enable_pin: !PC6
+microsteps: 16
+rotation_distance: 8
+
+[tmc2660 stepper_z1]
+cs_pin: PD25
+spi_bus: usart1
+run_current: 1.000
+sense_resistor: 0.051
+
+#On drive E5
+[stepper_z2]
+step_pin: PD3
+dir_pin: !PD17
+enable_pin: !PC6
+microsteps: 16
+rotation_distance: 8
+
+[tmc2660 stepper_z2]
+cs_pin: PD26
+spi_bus: usart1
+run_current: 1.000
+sense_resistor: 0.051
+
+#On drive E6
+[stepper_z3]
+step_pin: PD27
+dir_pin: !PC0
+enable_pin: !PC6
+microsteps: 16
+rotation_distance: 8
+
+[tmc2660 stepper_z3]
+cs_pin: PB14
+spi_bus: usart1
+run_current: 1.000
+sense_resistor: 0.051
+
+#On drive E0
+[extruder]
+step_pin: PD5
+dir_pin: PA1
+enable_pin: !PC6
+microsteps: 16
+rotation_distance: 33.500
+nozzle_diameter: 0.400
+filament_diameter: 1.750
+heater_pin: !PA20
+sensor_type: EPCOS 100K B57560G104F
+sensor_pin: PC15
+control: pid
+pid_Kp: 22.2
+pid_Ki: 1.08
+pid_Kd: 114
+min_temp: 0
+max_temp: 250
+
+[tmc2660 extruder]
+cs_pin: PC17
+spi_bus: usart1
+run_current: 1.000
+sense_resistor: 0.051
+
+#On drive E1
+[extruder1]
+step_pin: PD4
+dir_pin: PD9
+enable_pin: !PC6
+microsteps: 16
+rotation_distance: 33.500
+nozzle_diameter: 0.400
+filament_diameter: 1.750
+heater_pin: !PA16
+sensor_type: EPCOS 100K B57560G104F
+sensor_pin: PC12
+control: pid
+pid_Kp: 22.2
+pid_Ki: 1.08
+pid_Kd: 114
+min_temp: 0
+max_temp: 250
+
+[tmc2660 extruder1]
+cs_pin: PC25
+spi_bus: usart1
+run_current: 1.000
+sense_resistor: 0.051
+
+# On drive E2
+[extruder2]
+step_pin: PD2
+dir_pin: !PD28
+enable_pin: !PC6
+microsteps: 16
+rotation_distance: 33.500
+nozzle_diameter: 0.400
+filament_diameter: 1.750
+heater_pin: !PC3
+sensor_type: EPCOS 100K B57560G104F
+sensor_pin: PC29
+control: pid
+pid_Kp: 22.2
+pid_Ki: 1.08
+pid_Kd: 114
+min_temp: 0
+max_temp: 250
+
+[tmc2660 extruder2]
+cs_pin: PD23
+spi_bus: usart1
+run_current: 1.000
+sense_resistor: 0.051
+
+# On drive E3
+[extruder3]
+step_pin: PD1
+dir_pin: !PD22
+enable_pin: !PC6
+microsteps: 16
+rotation_distance: 33.500
+nozzle_diameter: 0.400
+filament_diameter: 1.750
+heater_pin: !PC5
+sensor_type: EPCOS 100K B57560G104F
+sensor_pin: PC30
+control: pid
+pid_Kp: 22.2
+pid_Ki: 1.08
+pid_Kd: 114
+min_temp: 0
+max_temp: 250
+
+[tmc2660 extruder3]
+cs_pin: PD24
+spi_bus: usart1
+run_current: 1.000
+sense_resistor: 0.051
+
+[heater_bed]
+heater_pin: !PA19
+sensor_type: EPCOS 100K B57560G104F
+sensor_pin: PC13
+control: watermark
+min_temp: 0
+max_temp: 130
+
+# Fan0
+[fan]
+pin: PC23
+
+# Fan1 controlled by extruder
+[heater_fan heatbreak_cooling_fan]
+pin: PC26
+heater: extruder
+heater_temp: 45
+fan_speed: 1.0
+
+# Fan2, controlled by E5_TEMP
+[temperature_fan chamber_fan]
+pin: PA0
+max_power: 1
+shutdown_speed: 1
+cycle_time: 0.01
+min_temp: 40
+max_temp: 120
+sensor_type: EPCOS 100K B57560G104F
+sensor_pin: PC27
+control: pid
+pid_Kp: 22.2
+pid_Ki: 1.08
+pid_Kd: 114
+
+[mcu]
+serial: /dev/serial/by-id/usb-Klipper_Klipper_firmware_12345-if00
+
+[sx1509 duex]
+i2c_address: 62 # Address is fixed on duex boards
+
+[printer]
+kinematics: cartesian
+max_velocity: 300
+max_accel: 3000
+max_z_velocity: 5
+max_z_accel: 100
+
+[static_digital_output onboard_led]
+pins: !PC2
+
+[output_pin FAN3]
+pin: sx1509_duex:PIN_12
+pwm: True
+hardware_pwm: True # Only hardware PWM fans are supported
+
+[output_pin FAN4]
+pin: sx1509_duex:PIN_7
+pwm: True
+hardware_pwm: True
+
+[output_pin FAN5]
+pin: sx1509_duex:PIN_6
+pwm: True
+hardware_pwm: True
+
+[output_pin FAN6]
+pin: sx1509_duex:PIN_5
+pwm: True
+hardware_pwm: True
+
+[output_pin FAN7]
+pin: sx1509_duex:PIN_4
+pwm: True
+hardware_pwm: True
+
+[output_pin FAN8]
+pin: sx1509_duex:PIN_15
+pwm: True
+hardware_pwm: True
+
+[output_pin GPIO1] # General purpose pin broken out on the duex
+pin: sx1509_duex:PIN_11
+pwm: False
+value: 1

config/generic-duet2-maestro.cfg

@@ -0,0 +1,161 @@
+# This file contains common pin mappings for the Duet2 Maestro. To use
+# this config, the firmware should be compiled for the sam4s8c.
+
+# See docs/Config_Reference.md for a description of parameters.
+
+[stepper_x]
+step_pin: PC20
+dir_pin: PC18
+enable_pin: !PA1
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^PA24
+position_endstop: 0
+position_max: 200
+homing_speed: 50
+
+[tmc2208 stepper_x]
+uart_pin: PA9
+tx_pin: PA10
+select_pins: !PC14, !PC16, !PC17
+sense_resistor: 0.075
+run_current: 0.800
+stealthchop_threshold: 999999
+
+[stepper_y]
+step_pin: PC2
+dir_pin: PA8
+enable_pin: !PA1
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^PB6
+position_endstop: 0
+position_max: 200
+homing_speed: 50
+
+[tmc2208 stepper_y]
+uart_pin: PA9
+tx_pin: PA10
+select_pins: PC14, !PC16, !PC17
+sense_resistor: 0.075
+run_current: 0.800
+stealthchop_threshold: 999999
+
+[stepper_z]
+step_pin: PC28
+dir_pin: PB4
+enable_pin: !PA1
+microsteps: 16
+rotation_distance: 8
+endstop_pin: ^PC10
+position_endstop: 0.5
+position_max: 200
+
+[tmc2208 stepper_z]
+uart_pin: PA9
+tx_pin: PA10
+select_pins: !PC14, PC16, !PC17
+sense_resistor: 0.075
+run_current: 0.800
+stealthchop_threshold: 999999
+
+# Support analog sensor adjustments using VREF/VSSA pins
+[adc_scaled vref_scaled]
+vref_pin: PA17
+vssa_pin: PA19
+
+[extruder]
+step_pin: PC4
+dir_pin: PB7
+enable_pin: !PA1
+microsteps: 16
+rotation_distance: 33.500
+nozzle_diameter: 0.400
+filament_diameter: 1.750
+heater_pin: !PC1
+sensor_type: EPCOS 100K B57560G104F
+pullup_resistor: 2200
+sensor_pin: vref_scaled:PB0
+control: pid
+pid_Kp: 22.2
+pid_Ki: 1.08
+pid_Kd: 114
+min_temp: 0
+max_temp: 250
+
+[tmc2208 extruder]
+uart_pin: PA9
+tx_pin: PA10
+select_pins: PC14, PC16, !PC17
+sense_resistor: 0.075
+run_current: 0.800
+stealthchop_threshold: 999999
+
+#[extruder1]
+#step_pin: PC5
+#dir_pin: PC6
+#enable_pin: !PA1
+#heater_pin: !PA16
+#sensor_pin: PC30
+#pullup_resistor: 2200
+#...
+#[tmc2208 extruder1]
+#select_pins: !PC14, !PC16, PC17
+#sense_resistor: 0.075
+#...
+
+# External steppers
+# e2: step_pin=PC31 dir_pin=PA18 enable_pin=PC27 select_pins=PC14,!PC16,PC17
+# e3: step_pin=PC21 dir_pin=PC24 enable_pin=PC25 select_pins=!PC14,PC16,PC17
+# e0_stop: endstop_pin=PA25
+# e1_stop: endstop_pin=PC7
+# c_temp: sensor_pin=PB1
+
+[heater_bed]
+heater_pin: !PC0
+sensor_type: EPCOS 100K B57560G104F
+pullup_resistor: 2200
+sensor_pin: vref_scaled:PA20
+control: watermark
+min_temp: 0
+max_temp: 130
+
+[fan]
+pin: PC23  # FAN0
+
+#[heater_fan heatbreak_cooling_fan]
+#pin: PC22  # FAN1
+
+#[heater_fan board_cooling_fan]
+#pin: PC29  # FAN2
+
+#[bltouch]
+#sensor_pin: PC15  # Z_PROBE_IN
+#control_pin: PC26  # Z_PROBE_MOD
+#...
+
+[mcu]
+serial: /dev/serial/by-id/usb-Klipper_Klipper_firmware_12345-if00
+
+[printer]
+kinematics: cartesian
+max_velocity: 300
+max_accel: 3000
+max_z_velocity: 5
+max_z_accel: 100
+
+[static_digital_output led]
+pins: !PC26  # Z_PROBE_MOD / SERVO pin
+
+# EXP1 / EXP2 (display) pins
+[board_pins]
+aliases:
+    # EXP1 header
+    EXP1_1=PA15, EXP1_3=PA6, EXP1_5=PA2,  EXP1_7=<NC>, EXP1_9=<GND>,
+    EXP1_2=PA7,  EXP1_4=PC9, EXP1_6=<NC>, EXP1_8=<NC>, EXP1_10=<5V>,
+    # EXP2 header
+    EXP2_1=PA5, EXP2_3=PC3,  EXP2_5=PB5, EXP2_7=<NC>,  EXP2_9=<GND>,
+    EXP2_2=PA2, EXP2_4=PB13, EXP2_6=PA6, EXP2_8=<RST>, EXP2_10=<NC>
+    # Pins EXP2_1, EXP2_6, EXP2_2 are also MISO, MOSI, SCK of bus "usart0"
+
+# See the sample-lcd.cfg file for definitions of common LCD displays.

config/generic-duet2.cfg

@@ -0,0 +1,118 @@
+# This file contains common pin mappings for Duet2 Eth/Wifi boards. To
+# use this config, the firmware should be compiled for the SAM4E8E.
+
+# See docs/Config_Reference.md for a description of parameters.
+
+[stepper_x]
+step_pin: PD6
+dir_pin: PD11
+enable_pin: !PC6
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^PC14
+position_endstop: 0
+position_max: 250
+
+[tmc2660 stepper_x]
+cs_pin: PD14
+spi_bus: usart1
+run_current: 1.000
+sense_resistor: 0.051
+
+[stepper_y]
+step_pin: PD7
+dir_pin: !PD12
+enable_pin: !PC6
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^PA2
+position_endstop: 0
+position_max: 210
+
+[tmc2660 stepper_y]
+cs_pin: PC9
+spi_bus: usart1
+run_current: 1.000
+sense_resistor: 0.051
+
+[stepper_z]
+step_pin: PD8
+dir_pin: PD13
+enable_pin: !PC6
+microsteps: 16
+rotation_distance: 8
+endstop_pin: ^PD29
+#endstop_pin: PD10  # E0 endstop
+#endstop_pin: PC16  # E1 endstop
+position_endstop: 0.5
+position_max: 200
+
+[tmc2660 stepper_z]
+cs_pin: PC10
+spi_bus: usart1
+run_current: 1.000
+sense_resistor: 0.051
+
+[extruder]
+step_pin: PD5
+dir_pin: PA1
+enable_pin: !PC6
+microsteps: 16
+rotation_distance: 33.500
+nozzle_diameter: 0.400
+filament_diameter: 1.750
+heater_pin: !PA20
+sensor_type: EPCOS 100K B57560G104F
+sensor_pin: PC15
+control: pid
+pid_Kp: 22.2
+pid_Ki: 1.08
+pid_Kd: 114
+min_temp: 0
+max_temp: 250
+
+[tmc2660 extruder]
+cs_pin: PC17
+spi_bus: usart1
+run_current: 1.000
+sense_resistor: 0.051
+
+#[extruder1]
+#step_pin: PD4
+#dir_pin: PD9
+#enable_pin: !PC6
+#heater_pin: !PA16
+#sensor_pin: PC12
+#...
+#[tmc2660 extruder1]
+#cs_pin: PC25
+#spi_bus: usart1
+#sense_resistor: 0.051
+#...
+
+[heater_bed]
+heater_pin: !PA19
+sensor_type: EPCOS 100K B57560G104F
+sensor_pin: PC13
+control: watermark
+min_temp: 0
+max_temp: 130
+
+[fan]
+pin: PC23  # FAN0
+
+#[heater_fan heatbreak_cooling_fan]
+#pin: PC26  # FAN1
+
+#[heater_fan board_cooling_fan]
+#pin: PA0  # FAN2
+
+[mcu]
+serial: /dev/serial/by-id/usb-Klipper_Klipper_firmware_12345-if00
+
+[printer]
+kinematics: cartesian
+max_velocity: 300
+max_accel: 3000
+max_z_velocity: 5
+max_z_accel: 100

config/generic-duet3-6hc.cfg

@@ -0,0 +1,152 @@
+# This file contains common pin mappings for the Duet3 6HC. To use
+# this config, the firmware should be compiled for the SAME70Q20B.
+
+# To flash the board, erase the existing firmware by jumpering the erase jumper.
+# Boot the board, wait for reset to complete, remove the jumper, and then reboot the board,
+# as described in Duet's documentation:
+#    https://docs.duet3d.com/en/User_manual/RepRapFirmware/Updating_firmware#all-other-duet-boards
+# Then run: make flash FLASH_DEVICE=/dev/ttyACM0
+
+# See docs/Config_Reference.md for a description of parameters.
+
+
+# Pins for reference, v1.02 board:
+# Driver Step Pins - 0:PC18 1:PC16 2:PC28 3:PC1  4:PC4 5:PC9
+# Driver Dir Pins  - 0:PB5  1:PD10 2:PA4  3:PA22 4:PC3 5:PD14
+# Driver Enable - !PA9
+# Driver CS - PD17
+# Thermistor Pins - TEMP0:PC15 TEMP1:PC29 TEMP2:PC30 TEMP3:PC31
+# Pullup Resistor - 2200
+# Vssa Sense:PC13 | Vref Sense:PC0
+# Current Sense resistor for drivers - 0.05ohm
+# SPI lines:{PC25} -> SPIMosi:PC27 SPIMiso:PC26 SPISCLK:PC24
+# Vin Monitor:PA20
+# CAN Pins - TX0:PB2 RX0:PB3 TX1:PD12 RX1:PC12
+# Heaters - Out0:PA7 Out1:PA24 Out2:PA16 Out3:PA11
+# Fan outputs - Out4:PA15 Out5:PC5 Out6:PA8 Out7:PC11 Out8:PC8 Out9:PA12 | Out9 is shared with VFD_Out
+# Tach Pins for Fans - Out4.Tach:PC7 Out5.Tach:PD23 Out6.Tach:PA1
+# GPIO_out - IO0:PD26 IO1:PD16 IO2:PD27 IO3:PA3 IO4:PE0  IO5:PD21 IO6:PA0  IO7:PD23 IO8:PE1
+# GPIO_in -  IO0:PD25 IO1:PD15 IO2:PD28 IO3:PE5 IO4:PD30 IO5:PA19 IO6:PA18 IO7:PA17 IO8:PE3
+# Driver Diag - 0:PD29 1:PC17 2:PD13 3:PC2 4:PD31 5:PC10
+
+[stepper_x]
+#driver 0
+step_pin: PC18
+dir_pin: PB5
+enable_pin: !PA9
+microsteps: 128
+rotation_distance: 40
+endstop_pin: PD25 #IO0
+position_endstop: 0
+position_max: 450
+
+[tmc5160 stepper_x]
+cs_pin: PD17
+spi_bus: usart1
+chain_position: 1
+chain_length: 6
+interpolate: False
+run_current: 1
+sense_resistor: 0.05
+
+[stepper_y]
+#driver 1
+step_pin: PC16
+dir_pin: PD10
+enable_pin: !PA9
+microsteps: 128
+rotation_distance: 40
+endstop_pin: PD15 #IO1
+position_endstop: 0
+position_max: 450
+
+[tmc5160 stepper_y]
+cs_pin: PD17
+chain_position: 2
+chain_length: 6
+interpolate: False
+run_current: 1.0
+sense_resistor: 0.05
+
+[stepper_z]
+#driver2
+step_pin: PC28
+dir_pin: PA4
+enable_pin: !PA9
+microsteps: 64
+rotation_distance: 8
+endstop_pin: PD28 #IO2
+position_endstop: 0
+position_min: 0
+position_max: 400
+
+[tmc5160 stepper_z]
+cs_pin: PD17
+chain_position: 3
+chain_length: 6
+interpolate: False
+run_current: 1.0
+sense_resistor: 0.05
+
+[adc_scaled vref_scaled]
+vref_pin: PC0
+vssa_pin: PC13
+
+[extruder]
+#driver3
+step_pin: PC1
+dir_pin: PA22
+enable_pin: !PA9
+microsteps: 16
+rotation_distance: 33.500
+nozzle_diameter: 0.400
+filament_diameter: 1.750
+heater_pin: PA24 #Out1
+sensor_type: ATC Semitec 104GT-2
+pullup_resistor: 2200
+sensor_pin: vref_scaled:PC29 #Temp1
+control: pid
+pid_Kp: 30.089
+pid_Ki: 2.229
+pid_Kd: 101.550
+min_temp: 0
+max_temp: 285
+
+[tmc5160 extruder]
+cs_pin: PD17
+chain_position: 4
+chain_length: 6
+interpolate: False
+run_current: .6
+sense_resistor: 0.05
+
+[heater_fan heatbreak_fan]
+pin: PC8 #Out8
+heater: extruder
+heater_temp: 50.0
+
+[heater_bed]
+heater_pin: PA7 #Out0
+sensor_type: Generic 3950
+sensor_pin: vref_scaled:PC15 #Temp0
+control: pid
+pullup_resistor: 2200
+pid_Kp: 61.049
+pid_Ki: 2.339
+pid_Kd: 398.344
+min_temp: 0
+max_temp: 130
+
+[heater_fan heatbreak_fan]
+pin: PA15 #Out4
+
+[fan]
+pin: PC5 #Out5
+
+[mcu]
+serial: /dev/ttyACM0
+
+[printer]
+kinematics: cartesian
+max_velocity: 350
+max_accel: 3000

config/generic-duet3-6xd.cfg

@@ -0,0 +1,108 @@
+# This file contains common pin mappings for the Duet3 6XD. To use
+# this config, the firmware should be compiled for the SAME70Q20B.
+
+# To flash the board, erase the existing firmware by jumpering the erase jumper.
+# Boot the board, wait for reset to complete, remove the jumper, and then reboot the board,
+# as described in Duet's documentation:
+#    https://docs.duet3d.com/en/User_manual/RepRapFirmware/Updating_firmware#all-other-duet-boards
+# Then run: make flash FLASH_DEVICE=/dev/ttyACM0
+
+# See docs/Config_Reference.md for a description of parameters.
+
+
+# Pins for reference, v1.0 board:
+# Driver Step Pins - 0:PC18 1:PC16 2:PC28 3:PC1  4:PC4  5:PC9
+# Driver Dir Pins  - 0:PB5  1:PD10 2:PA4  3:PA22 4:PC3  5:PD14
+# Driver En  Pins  - 0:PB4  1:PA21 2:PC20 3:PA23 4:PA2  5:PD17
+# Driver Err Pins  - 0:PD29 1:PC17 2:PD13 3:PC2  4:PD31 5:PC10
+# Thermistor Pins - TEMP0:PC15 TEMP1:PC29 TEMP2:PC0 TEMP3:PC31
+# Pullup Resistor - 2200
+# Vssa Sense:PC13 | Vref Sense:PC30
+# SPI0:{PD19, PA5, PA6, PD20, PC22} -> SPIMosi:PB1 SPIMiso:PB0 SPISCLK:PB13
+# SPI1:{PC25} -> SPIMosi:PC27 SPIMiso:PC26 SPISCLK:PC24 DATA_RDY:PE2
+# Vin Monitor:PA20
+# LED's - Diag:PB6, Act:PB7
+# CAN Pins - TX0:PB2 RX0:PB3 TX1:PD12 RX1:PC12
+# Heaters - Out0:PA24 Out1:PA16 Out2:PA11
+# Fan outputs - Out3:PA15 Out4:PC5 Out5:PA8 Out6:PC11 Out7:PC8 Out8:PA12
+# Tach Pins for Fans - Out3.Tach:PC7 Out4.Tach:PD23 Out5.Tach:PA1
+# VFD - PA7
+# GPIO_out - IO0:PD26 IO1:PD16 IO2:PD27 IO3:PA3 IO4:PE0  IO5:PD21 IO6:PA0  IO7:PD23 IO8:PE1
+# GPIO_in -  IO0:PD25 IO1:PD15 IO2:PD28 IO3:PE5 IO4:PD30 IO5:PA19 IO6:PA18 IO7:PA17 IO8:PE3
+
+[stepper_x]
+#driver 0
+step_pin: PC18
+dir_pin: PB5
+enable_pin: PB4
+microsteps: 128
+rotation_distance: 40
+endstop_pin: PD25 #IO0
+position_endstop: 0
+position_max: 450
+
+[stepper_y]
+#driver 1
+step_pin: PC16
+dir_pin: PD10
+enable_pin: PA21
+microsteps: 128
+rotation_distance: 40
+endstop_pin: PD15 #IO1
+position_endstop: 0
+position_max: 450
+
+[stepper_z]
+#driver2
+step_pin: PC28
+dir_pin: PA4
+enable_pin: PC20
+microsteps: 64
+rotation_distance: 8
+endstop_pin: PD28 #IO2
+position_endstop: 0
+position_min: 0
+position_max: 400
+
+[adc_scaled vref_scaled]
+vref_pin: PC30
+vssa_pin: PC13
+
+[extruder]
+#driver3
+step_pin: PC1
+dir_pin: PA22
+enable_pin: PA23
+microsteps: 16
+rotation_distance: 33.500
+nozzle_diameter: 0.400
+filament_diameter: 1.750
+heater_pin: PA24 #Out0
+sensor_type: ATC Semitec 104GT-2
+pullup_resistor: 2200
+sensor_pin: vref_scaled:PC29 #Temp1
+control: pid
+pid_Kp: 30.089
+pid_Ki: 2.229
+pid_Kd: 101.550
+min_temp: 0
+max_temp: 285
+
+[heater_fan heatbreak_fan]
+pin: PC8 #Out7
+heater: extruder
+heater_temp: 50.0
+
+[heater_fan heatbreak_fan]
+pin: PA15 #Out3
+
+[fan]
+pin: PC5 #Out4
+
+[mcu]
+serial: /dev/ttyACM0
+
+[printer]
+kinematics: cartesian
+max_velocity: 350
+max_accel: 3000

config/generic-duet3-mini.cfg

@@ -0,0 +1,162 @@
+# This file contains common pin mappings for the Duet3 Mini 5+. To use
+# this config, the firmware should be compiled for the SAME54P20 with
+# a "25Mhz crystal", "16KiB bootloader", and USB communication.
+
+# To flash the board, double tap the board's reset button to enter the
+# bootloader and then run: make flash FLASH_DEVICE=/dev/ttyACM0
+
+# See docs/Config_Reference.md for a description of parameters.
+
+
+# Pins for reference:
+# Driver Step Pins - 0:PC26, 1:PC25, 2:PC24, 3:PC19, 4:PC16, 5:PC30, 6:PC18
+# Driver Dir pins - 0:PB3, 1:PB29, 2:PB28, 3:PD20, 4:PD21, 5:PB0, 6:PA27
+# Driver Enable - !PC28
+# Uart addresses - 0:0 1:1 2:2 3:3 4:!0 5:!1 6:!2 | "!" is for inverted select pin
+# Thermistor Pins - T0:PC0, T1:PC1, T2:PC2
+# Vssa Sense:PB4 | Vref Sense:PB5
+# Current Sense resistor for drivers - .076ohm
+# SPI lines:{PD11, PC7} -> Shared SerCom#7, SPIMosi:PC12, SPIMiso:PC15, SPISCLK:PC13
+# Vin Monitor:PC3, uses 11:1 voltage divider
+# LED's - Diag:PA31, Act:PA30
+# 12864 LCD - LCDCSPIN:PC6, ENCA:PC11, ENCB:PD1, ENCSW:PB9, LCD A0:PA2, LCDBeep:PA9, LCD Neopixel Out:PB12 (shared with IO3.out)
+# Neopixel Out - PA8
+# Serial0 - TX:PB25, RX:PB24 (USB)
+# Serial1 - TX:PB31, RX:PB30
+# SBC SPISS pin:PA6, SBCTfrReady:PA3, SerComPins:{PA4, PA5, PA6, PA7}
+# CAN Pins - TX:PB14 RX:PB15
+# Heaters, Fan outputs - {Out0:PB17 Out1:PC10 Out2:PB13 Out3:PB11 Out4:PA11, Out5:PB2, Out6:PB1} | Out6 is shared with VFD_Out
+# Tach Pins for Fans - {Out3.Tach:PB27 Out4.Tach:PB26}
+# GPIO_out - {IO1:PB31 IO2:PD9 IO3:PB12 IO4:PD10} IO4 is shared with PSON
+# GPIO_in - {IO1:PB30 IO2:PD8 IO3:PB7 IO4:PC5 IO5:PC4 IO6:PC31}
+# Driver Diag - {D0:PA10, D1:PB8, D2:PA22, D3:PA23, D4:PC21, D5:PB10, D6:PA27}
+# Mux Pin - PD0
+# EXP headers only support 12864 LCD's
+
+[stepper_x]
+#driver0
+step_pin: PC26
+dir_pin: !PB3
+enable_pin: !PC28
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^PC31
+position_endstop: 0
+position_max: 450
+
+[tmc2209 stepper_x]
+uart_pin: PA1
+tx_pin: PA0
+select_pins: PD0
+uart_address: 0
+run_current: 1
+sense_resistor: 0.056
+
+[stepper_y]
+#driver1
+step_pin: PC25
+dir_pin: PB29
+enable_pin: !PC28
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^PC4
+position_endstop: 0
+position_max: 450
+
+[tmc2209 stepper_y]
+uart_pin: PA1
+tx_pin: PA0
+select_pins: PD0
+uart_address: 1
+run_current: 1
+sense_resistor: 0.056
+
+[stepper_z]
+#driver2
+step_pin: PC24
+dir_pin: PB28
+enable_pin: !PC28
+microsteps: 16
+rotation_distance: 8
+endstop_pin: PC5
+position_endstop: 0
+position_max: 400
+
+[tmc2209 stepper_z]
+uart_pin: PA1
+tx_pin: PA0
+select_pins: PD0
+uart_address: 2
+run_current: 1
+sense_resistor: 0.056
+
+[adc_scaled vref_scaled]
+vref_pin: PB5
+vssa_pin: PB4
+
+[extruder]
+#driver3
+step_pin: PC19
+dir_pin: PD20
+enable_pin: !PC28
+microsteps: 16
+rotation_distance: 33.500
+nozzle_diameter: 0.400
+filament_diameter: 1.750
+heater_pin: PB13 # out2
+sensor_type: ATC Semitec 104GT-2
+pullup_resistor: 2200
+sensor_pin: vref_scaled:PC1
+control: pid
+pid_Kp: 30.089
+pid_Ki: 2.229
+pid_Kd: 101.550
+min_temp: 0
+max_temp: 285
+
+[tmc2209 extruder]
+uart_pin: PA1
+tx_pin: PA0
+uart_address: 3
+select_pins: PD0
+run_current: 1
+sense_resistor: 0.056
+
+[heater_bed]
+heater_pin: PB17 #out1
+sensor_type: Generic 3950
+sensor_pin: vref_scaled:PC0
+control: pid
+pullup_resistor: 2200
+pid_Kp: 61.049
+pid_Ki: 2.339
+pid_Kd: 398.344
+min_temp: 0
+max_temp: 130
+
+[heater_fan heatbreak_fan]
+pin: PB11
+
+[fan]
+pin: PA11
+
+[mcu]
+serial: /dev/ttyACM0
+
+[printer]
+kinematics: cartesian
+max_velocity: 350
+max_accel: 3000
+
+# EXP1 / EXP2 (display) pins
+[board_pins]
+aliases:
+    # EXP1 header
+    EXP1_1=PA9, EXP1_3=PC6, EXP1_5=<LCD_RST>, EXP1_7=<NC>, EXP1_9=<GND>,
+    EXP1_2=PB9, EXP1_4=PA2, EXP1_6=PB12,      EXP1_8=<NC>, EXP1_10=<5V>,
+    # EXP2 header
+    EXP2_1=PC15,  EXP2_3=PD1,  EXP2_5=PC11, EXP2_7=PD12,        EXP2_9=<GND>,
+    EXP2_2=PC13, EXP2_4=PC14, EXP2_6=PC12, EXP2_8=<RESET_EXT>, EXP2_10=<NC>
+    # Pins EXP2_1, EXP2_6, EXP2_2 are also MISO, MOSI, SCK of spi bus "sercom7"
+
+# See the sample-lcd.cfg file for definitions of common LCD displays.

config/generic-einsy-rambo.cfg

@@ -0,0 +1,118 @@
+# This file contains common pin mappings for Einsy Rambo boards. To use
+# this config, the firmware should be compiled for the AVR atmega2560.
+
+# See docs/Config_Reference.md for a description of parameters.
+
+# Note: The Einsy boards sold by Prusa have defective firmware on the
+# usb-to-serial chip that make the boards unusable with Klipper
+# (boards sold by Ultimaker do not have this issue). See
+# https://github.com/PrusaOwners/mk3-32u2-firmware for a fixed
+# usb-to-serial firmware.
+
+[stepper_x]
+step_pin: PC0
+dir_pin: PL0
+enable_pin: !PA7
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^PB6
+#endstop_pin: tmc2130_stepper_x:virtual_endstop
+position_endstop: 0
+position_max: 250
+
+[tmc2130 stepper_x]
+cs_pin: PG0
+run_current: .5
+sense_resistor: 0.220
+diag1_pin: !PK2
+
+[stepper_y]
+step_pin: PC1
+dir_pin: !PL1
+enable_pin: !PA6
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^PB5
+#endstop_pin: tmc2130_stepper_y:virtual_endstop
+position_endstop: 0
+position_max: 210
+
+[tmc2130 stepper_y]
+cs_pin: PG2
+run_current: .5
+sense_resistor: 0.220
+diag1_pin: !PK7
+
+[stepper_z]
+step_pin: PC2
+dir_pin: PL2
+enable_pin: !PA5
+microsteps: 16
+rotation_distance: 8
+endstop_pin: ^PB4
+#endstop_pin: tmc2130_stepper_z:virtual_endstop
+position_endstop: 0.5
+position_max: 200
+
+[tmc2130 stepper_z]
+cs_pin: PK5
+run_current: .5
+sense_resistor: 0.220
+diag1_pin: !PK6
+
+[extruder]
+step_pin: PC3
+dir_pin: PL6
+enable_pin: !PA4
+microsteps: 16
+rotation_distance: 33.500
+nozzle_diameter: 0.400
+filament_diameter: 1.750
+heater_pin: PE5
+sensor_type: EPCOS 100K B57560G104F
+sensor_pin: PF0
+control: pid
+pid_Kp: 22.2
+pid_Ki: 1.08
+pid_Kd: 114
+min_temp: 0
+max_temp: 250
+
+[tmc2130 extruder]
+cs_pin: PK4
+run_current: .5
+sense_resistor: 0.220
+diag1_pin: !PK3
+
+[heater_bed]
+heater_pin: PG5
+sensor_type: EPCOS 100K B57560G104F
+sensor_pin: PF2
+control: watermark
+min_temp: 0
+max_temp: 130
+
+[fan]
+pin: PH5
+
+#[heater_fan heatbreak_cooling_fan]
+#pin: PH3
+
+[temperature_sensor board_sensor]
+sensor_pin: PF6
+sensor_type: TDK NTCG104LH104JT1
+min_temp: 0
+max_temp: 50
+
+[mcu]
+serial: /dev/ttyACM0
+
+[printer]
+kinematics: cartesian
+max_velocity: 300
+max_accel: 3000
+max_z_velocity: 5
+max_z_accel: 100
+
+[static_digital_output yellow_led]
+pins: !PB7

config/generic-flyboard.cfg

@@ -0,0 +1,263 @@
+# This file contains common pin mappings for the 9 stepper motor
+# "flymaker flyboard FLYF407ZG" board from creative3dprinter.com. To
+# use this config, the firmware should be compiled for the STM32F407
+# with a "32KiB bootloader".
+
+# The "make flash" command does not work on the FLYBOARD. Instead,
+# after running "make", copy the generated "out/klipper.bin" file to a
+# file named "firmware.bin" on an SD card and then restart the FLYBOARD
+# with that SD card.
+
+# See docs/Config_Reference.md for a description of parameters.
+
+[stepper_x]
+step_pin: PB9
+dir_pin: PE0
+enable_pin: !PE1
+microsteps: 16
+rotation_distance: 40
+endstop_pin: PC3
+position_endstop: 0
+position_max: 200
+homing_speed: 50
+
+[stepper_y]
+step_pin: PB8
+dir_pin: PG11
+enable_pin: !PG12
+microsteps: 16
+rotation_distance: 40
+endstop_pin: PF2
+position_endstop: 0
+position_max: 200
+homing_speed: 50
+
+[stepper_z]
+step_pin: PA8
+dir_pin: PD6
+enable_pin: !PD7
+microsteps: 16
+rotation_distance: 8
+endstop_pin: PF0
+position_endstop: 0.5
+position_max: 200
+
+[extruder]
+step_pin: PC7
+dir_pin: PD3
+enable_pin: !PD4
+microsteps: 16
+rotation_distance: 33.500
+nozzle_diameter: 0.400
+filament_diameter: 1.750
+heater_pin: PF7 # Heat0
+sensor_pin: PA0 # T1 Header
+sensor_type: EPCOS 100K B57560G104F
+control: pid
+pid_Kp: 22.2
+pid_Ki: 1.08
+pid_Kd: 114
+min_temp: 0
+max_temp: 350
+
+#[extruder1]
+#step_pin: PC6
+#dir_pin: PA15
+#enable_pin: !PD0
+#heater_pin: PF6 # Heat1
+#sensor_pin: PC1 # T2
+#...
+
+#[extruder2]
+#step_pin: PD15
+#dir_pin: PG7
+#enable_pin: !PG8
+#heater_pin: PE6 # Heat2
+#sensor_pin: PC0 # T3
+#...
+
+#[extruder3]
+#step_pin: PD14
+#dir_pin: PG4
+#enable_pin: !PG5
+#heater_pin: PE5 # Heat3
+#sensor_pin: PF10 # T4
+#...
+
+#[extruder4]
+#step_pin: PD13
+#dir_pin: PD11
+#enable_pin: !PG2
+#heater_pin: PE4 # Heat4
+#sensor_pin: PF5 # T5
+#...
+
+#[extruder4]
+#step_pin: PD12
+#dir_pin: PD8
+#enable_pin: !PD9
+#heater_pin: PE3 # Heat5
+#sensor_pin: PF4 # T6
+#...
+
+[heater_bed]
+heater_pin: PE2
+sensor_pin: PF3 # T0
+sensor_type: ATC Semitec 104GT-2
+control: watermark
+min_temp: 0
+max_temp: 200
+
+[fan]
+pin: PF8
+
+[heater_fan fan1]
+pin: PF9
+
+#[heater_fan fan2]
+#pin: PA2
+
+#[heater_fan fan3]
+#pin: PA1
+
+#[heater_fan fan4]
+#pin: PE13
+
+#[heater_fan fan5]
+#pin: PB11
+
+[mcu]
+serial: /dev/serial/by-id/usb-Klipper_Klipper_firmware_12345-if00
+
+[printer]
+kinematics: corexy
+max_velocity: 300
+max_accel: 3000
+max_z_velocity: 5
+max_z_accel: 100
+
+
+########################################
+# TMC2208 configuration
+########################################
+
+#[tmc2208 stepper_x]
+#uart_pin: PG13
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2208 stepper_y]
+#uart_pin: PG10
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2208 stepper_z]
+#uart_pin: PD5
+#run_current: 0.650
+#stealthchop_threshold: 999999
+
+#[tmc2208 extruder]
+#uart_pin: PD1
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2208 extruder1]
+#uart_pin: PA14
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2208 extruder2]
+#uart_pin: PG6
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2208 extruder3]
+#uart_pin: PG3
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2208 extruder4]
+#uart_pin: PD10
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2208 extruder5]
+#uart_pin: PB12
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+
+########################################
+# TMC2130 configuration
+########################################
+
+#[tmc2130 stepper_x]
+#cs_pin: PG13
+##diag1_pin: PC3
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2130 stepper_y]
+#cs_pin: PG10
+##diag1_pin: PF2
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2130 stepper_z]
+#cs_pin: PBD5
+##diag1_pin: PF0
+#run_current: 0.650
+#stealthchop_threshold: 999999
+
+#[tmc2130 extruder]
+#cs_pin: PD1
+##diag1_pin: PE15
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2130 extruder1]
+#cs_pin: PA14
+##diag1_pin: PE10
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2130 extruder2]
+#cs_pin: PG6
+##diag1_pin: PC15
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2130 extruder3]
+#cs_pin: PG3
+##diag1_pin: PC15
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2130 extruder4]
+#cs_pin: PD10
+##diag1_pin: PC15
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2130 extruder5]
+#cs_pin: PB12
+##diag1_pin: PC15
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+
+########################################
+# EXP1 / EXP2 (display) pins
+########################################
+
+[board_pins]
+aliases:
+    # EXP1 header
+    EXP1_1=PB10, EXP1_3=PE14, EXP1_5=PE10, EXP1_7=PE8, EXP1_9=<GND>,
+    EXP1_2=PE15, EXP1_4=PE12, EXP1_6=PE9,  EXP1_8=PE7, EXP1_10=<5V>,
+    # EXP2 header
+    EXP2_1=PB14, EXP2_3=PC5,  EXP2_5=PC4,  EXP2_7=PB2,   EXP2_9=<GND>,
+    EXP2_2=PB13, EXP2_4=PF11, EXP2_6=PB15, EXP2_8=<RST>, EXP2_10=<GND>
+    # Pins EXP2_1, EXP2_6, EXP2_2 are also MISO, MOSI, SCK of bus "spi2"
+
+# See the sample-lcd.cfg file for definitions of common LCD displays.

config/generic-fysetc-cheetah-v1.1.cfg

@@ -0,0 +1,122 @@
+# This file contains common pin mappings for the Fysetc Cheetah v1.1
+# board. To use this config, the firmware should be compiled for the
+# STM32F103 with "No bootloader" and serial (on USART1 PA10/PA9)
+# communication.
+
+# The "make flash" command does not work on the Cheetah. Instead,
+# after running "make", run the following command to flash the board:
+#  stm32flash -w out/klipper.bin -v -i rts,-dtr,dtr /dev/ttyUSB0
+
+# See docs/Config_Reference.md for a description of parameters.
+
+[stepper_x]
+step_pin: PB8
+dir_pin: !PB9
+enable_pin: !PA8
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^PA1
+position_endstop: 0
+position_max: 200
+homing_speed: 50
+
+[tmc2209 stepper_x]
+uart_pin: PA3
+tx_pin: PA2
+uart_address: 0
+run_current: 0.800
+stealthchop_threshold: 999999
+
+[stepper_y]
+step_pin: PB2
+dir_pin: !PB3
+enable_pin: !PB1
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^PB4
+position_endstop: 0
+position_max: 200
+homing_speed: 50
+
+[tmc2209 stepper_y]
+uart_pin: PA3
+tx_pin: PA2
+uart_address: 2
+run_current: 0.800
+stealthchop_threshold: 999999
+
+[stepper_z]
+step_pin: PC0
+dir_pin: PC1
+enable_pin: !PC2
+microsteps: 16
+rotation_distance: 8
+endstop_pin: ^PA15
+position_endstop: 0
+position_max: 200
+
+[tmc2209 stepper_z]
+uart_pin: PA3
+tx_pin: PA2
+uart_address: 1
+run_current: 0.800
+stealthchop_threshold: 999999
+
+[extruder]
+step_pin: PC15
+dir_pin: !PC14
+enable_pin: !PC13
+microsteps: 16
+rotation_distance: 33.500
+nozzle_diameter: 0.400
+filament_diameter: 1.750
+heater_pin: PC6
+sensor_type: EPCOS 100K B57560G104F
+sensor_pin: PC4
+control: pid
+pid_kp: 21.527
+pid_ki: 1.063
+pid_kd: 108.982
+min_temp: 0
+max_temp: 250
+
+[tmc2209 extruder]
+uart_pin: PA3
+tx_pin: PA2
+uart_address: 3
+run_current: 1.0
+stealthchop_threshold: 999999
+
+[heater_bed]
+heater_pin: PC7
+sensor_type: EPCOS 100K B57560G104F
+sensor_pin: PC5
+control: pid
+pid_kp: 54.027
+pid_ki: 0.770
+pid_kd: 948.182
+min_temp: 0
+max_temp: 130
+
+[fan]
+pin: PC8
+
+[mcu]
+serial: /dev/serial/by-id/usb-1a86_USB2.0-Serial-if00-port0
+restart_method: cheetah
+
+[printer]
+kinematics: cartesian
+max_velocity: 300
+max_accel: 3000
+max_z_velocity: 5
+max_z_accel: 100
+
+[board_pins]
+aliases:
+    # EXP1 header
+    EXP1_1=PC9,  EXP1_3=PC11, EXP1_5=PC10, EXP1_7=PB12, EXP1_9=<GND>,
+    EXP1_2=PC12, EXP1_4=PB14, EXP1_6=PB13, EXP1_8=PB15, EXP1_10=<5V>
+    # Pins EXP1_4, EXP1_8, EXP1_6 are also MISO, MOSI, SCK of bus "spi2"
+
+# See the sample-lcd.cfg file for definitions of common LCD displays.

config/generic-fysetc-cheetah-v1.2.cfg

@@ -0,0 +1,121 @@
+# This file contains common pin mappings for the Fysetc Cheetah v1.2b
+# board. To use this config, the firmware should be compiled for the
+# STM32F103 with "No bootloader" and serial (on USART1 PA10/PA9)
+# communication.
+
+# The "make flash" command does not work on the Cheetah. Instead,
+# after running "make", run the following command to flash the board:
+#  stm32flash -w out/klipper.bin -v -i rts,-dtr,dtr /dev/ttyUSB0
+
+# See docs/Config_Reference.md for a description of parameters.
+
+[stepper_x]
+step_pin: PB8
+dir_pin: !PB9
+enable_pin: !PA8
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^PA1
+position_endstop: 0
+position_max: 200
+homing_speed: 50
+
+[tmc2208 stepper_x]
+uart_pin: PA12
+tx_pin: PA11
+run_current: 0.800
+stealthchop_threshold: 999999
+
+[stepper_y]
+step_pin: PB2
+dir_pin: !PB3
+enable_pin: !PB1
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^PB4
+position_endstop: 0
+position_max: 200
+homing_speed: 50
+
+[tmc2208 stepper_y]
+uart_pin: PB7
+tx_pin: PB6
+run_current: 0.800
+stealthchop_threshold: 999999
+
+[stepper_z]
+step_pin: PC0
+dir_pin: PC1
+enable_pin: !PC2
+microsteps: 16
+rotation_distance: 8
+endstop_pin: ^PA15
+position_endstop: 0
+position_max: 200
+
+[tmc2208 stepper_z]
+uart_pin: PB11
+tx_pin: PB10
+run_current: 0.800
+stealthchop_threshold: 999999
+
+[extruder]
+step_pin: PC15
+dir_pin: !PC14
+enable_pin: !PC13
+microsteps: 16
+rotation_distance: 33.500
+nozzle_diameter: 0.400
+filament_diameter: 1.750
+heater_pin: PC6
+sensor_type: EPCOS 100K B57560G104F
+sensor_pin: PC4
+control: pid
+pid_kp: 21.527
+pid_ki: 1.063
+pid_kd: 108.982
+min_temp: 0
+max_temp: 250
+
+[tmc2208 extruder]
+uart_pin: PA3
+tx_pin: PA2
+run_current: 1.0
+stealthchop_threshold: 999999
+
+[heater_bed]
+heater_pin: PC7
+sensor_type: EPCOS 100K B57560G104F
+sensor_pin: PC5
+control: pid
+pid_kp: 54.027
+pid_ki: 0.770
+pid_kd: 948.182
+min_temp: 0
+max_temp: 130
+
+[fan]
+pin: PC8
+
+[heater_fan heatbreak_cooling_fan]
+pin: PB0
+
+[mcu]
+serial: /dev/serial/by-id/usb-1a86_USB2.0-Serial-if00-port0
+restart_method: cheetah
+
+[printer]
+kinematics: cartesian
+max_velocity: 300
+max_accel: 3000
+max_z_velocity: 5
+max_z_accel: 100
+
+[board_pins]
+aliases:
+    # EXP1 header
+    EXP1_1=PC9,  EXP1_3=PC11, EXP1_5=PC10, EXP1_7=PB12, EXP1_9=<GND>,
+    EXP1_2=PC12, EXP1_4=PB14, EXP1_6=PB13, EXP1_8=PB15, EXP1_10=<5V>
+    # Pins EXP1_4, EXP1_8, EXP1_6 are also MISO, MOSI, SCK of bus "spi2"
+
+# See the sample-lcd.cfg file for definitions of common LCD displays.

config/generic-fysetc-cheetah-v2.0.cfg

@@ -0,0 +1,138 @@
+# This file contains common pin mappings for the Fysetc Cheetah V2.0
+# To use this config, the firmware should be compiled for the
+# STM32F401 with a "32KiB bootloader".
+
+# Rename "klipper.bin" to "firmware.bin", copy to Sdcard and insert in motherboard
+
+# See docs/Config_Reference.md for a description of parameters.
+
+[stepper_x]
+step_pin: PC0
+dir_pin: PC1
+enable_pin: !PA8
+rotation_distance: 40
+microsteps: 64
+endstop_pin: ^PB4
+position_endstop: 0
+position_max: 200
+homing_speed: 50
+
+[tmc2209 stepper_x]
+uart_pin: PA3
+tx_pin: PA2
+uart_address: 0
+run_current: 0.800
+interpolate: false
+stealthchop_threshold: 0
+
+[stepper_y]
+step_pin: PC14
+dir_pin: !PC13
+enable_pin: !PC15
+rotation_distance: 40
+microsteps: 64
+endstop_pin: ^PC8
+position_endstop: 0
+position_max: 200
+homing_speed: 50
+
+[tmc2209 stepper_y]
+uart_pin: PA3
+tx_pin: PA2
+uart_address: 2
+run_current: 0.800
+interpolate: false
+stealthchop_threshold: 0
+
+[stepper_z]
+step_pin: PB9
+dir_pin: PB8
+enable_pin: !PC2
+rotation_distance: 8
+microsteps: 64
+endstop_pin: ^PB1
+position_endstop: 0
+position_max: 200
+
+[tmc2209 stepper_z]
+uart_pin: PA3
+tx_pin: PA2
+uart_address: 1
+run_current: 0.800
+interpolate: false
+stealthchop_threshold: 0
+
+[extruder]
+step_pin: PB2
+dir_pin: !PA15
+enable_pin: !PD2
+rotation_distance: 33.500
+microsteps: 16
+nozzle_diameter: 0.400
+filament_diameter: 1.750
+heater_pin: PC6
+sensor_type: EPCOS 100K B57560G104F
+sensor_pin: PC4
+control: pid
+pid_kp: 21.527
+pid_ki: 1.063
+pid_kd: 108.982
+min_temp: 0
+max_temp: 250
+
+[tmc2209 extruder]
+uart_pin: PA3
+tx_pin: PA2
+uart_address: 3
+run_current: 0.800
+interpolate: false
+stealthchop_threshold: 0
+
+[heater_bed]
+heater_pin: PC7
+sensor_type: EPCOS 100K B57560G104F
+sensor_pin: PC5
+control: pid
+pid_kp: 54.027
+pid_ki: 0.770
+pid_kd: 948.182
+min_temp: 0
+max_temp: 120
+
+[fan]
+pin: PA1
+
+[heater_fan my_hotend_fan]
+pin: PA13
+heater: extruder
+heater_temp: 50.0
+
+[controller_fan my_controller_fan]
+pin: PA14
+heater: extruder, heater_bed
+stepper: stepper_x, stepper_y, stepper_z, extruder
+
+[printer]
+kinematics: cartesian
+max_velocity: 500
+max_accel: 5000
+max_z_velocity: 5
+max_z_accel: 1000
+
+[mcu]
+serial: INSERTSERIALIDHERE
+
+[board_pins]
+aliases:
+    # EXP1 header
+    EXP1_1=<5V>,  EXP1_3=<RST>, EXP1_5=PA7,  EXP1_7=PA4,  EXP1_9=PA5,
+    EXP1_2=<GND>, EXP1_4=PC3,   EXP1_6=PC11, EXP1_8=PC10, EXP1_10=PA6,
+
+    # EXP2 header
+    EXP2_1=<5V>,  EXP2_3=PB7, EXP2_5=PB14, EXP2_7=PB12, EXP2_9=PC12,
+    EXP2_2=<GND>, EXP2_4=PB6, EXP2_6=PB13, EXP2_8=PB15, EXP2_10=PC9,
+
+    # EXP3 header
+    EXP3_1=PC9,  EXP3_3=PC10, EXP3_5=PC11, EXP3_7=PB12, EXP3_9=<GND>,
+    EXP3_2=PC12, EXP3_4=PB14, EXP3_6=PB13, EXP3_8=PB15, EXP3_10=<5V>
+    # Pins EXP1_4, EXP1_8, EXP1_6 are also MISO, MOSI, SCK of bus "spi2"

config/generic-fysetc-f6.cfg

@@ -0,0 +1,284 @@
+# This file contains common pin mappings for a Fysetc F6 board.
+# To use this config, the firmware should be compiled for the AVR atmega2560.
+
+# See docs/Config_Reference.md for a description of parameters.
+
+[stepper_x]
+step_pin: PF0
+dir_pin: PF1
+enable_pin: !PD7
+microsteps: 16
+rotation_distance: 40
+endstop_pin: PK1  # PK2 for X-max
+position_endstop: 0
+position_max: 200
+
+[stepper_y]
+step_pin: PF6
+dir_pin: PF7
+enable_pin: !PF2
+microsteps: 16
+rotation_distance: 40
+endstop_pin: PJ1  # PJ0 for Y-max
+position_endstop: 0
+position_max: 200
+
+[stepper_z]
+step_pin: PL6
+dir_pin: PL1
+enable_pin: !PF4
+microsteps: 16
+rotation_distance: 8
+endstop_pin: PB6  # PE4 for Z-max
+position_endstop: 0
+position_max: 400
+
+[extruder]
+step_pin: PA4
+dir_pin: !PA6
+enable_pin: !PA2
+microsteps: 16
+rotation_distance: 33.500
+nozzle_diameter: 0.400
+filament_diameter: 1.750
+heater_pin: PE3
+sensor_type: EPCOS 100K B57560G104F
+sensor_pin: PK4
+control: pid
+pid_Kp: 22
+pid_Ki: 1.08
+pid_Kd: 114
+min_temp: 0
+max_temp: 260
+
+#[extruder1]
+#step_pin: PC1
+#dir_pin: !PC3
+#enable_pin: !PC7
+#heater_pin: PH3
+#sensor_pin: PK5
+
+#[extruder2]
+#step_pin: PF5
+#dir_pin: !PF3
+#enable_pin: !PG1
+#heater_pin: PH4
+#sensor_pin: PK6
+
+[heater_bed]
+heater_pin: PH5
+sensor_type: EPCOS 100K B57560G104F
+sensor_pin: PK7
+control: watermark
+min_temp: 0
+max_temp: 130
+
+#fan for printed model FAN0
+[fan]
+pin: PL5
+
+#fan for hotend FAN1
+#[heater_fan heatbreak_cooling_fan]
+#pin: PL4
+#shutdown_speed: 1
+
+#fan for control board FAN2
+#[heater_fan my_control_fan]
+#pin: PL3
+
+[mcu]
+serial: /dev/serial/by-id/usb-1a86_USB2.0-Serial-if00-port0
+
+[printer]
+kinematics: cartesian
+max_velocity: 300
+max_accel: 3000
+max_z_velocity: 5
+max_z_accel: 100
+
+#Prevents communication issues with SPI drivers
+[static_digital_output disable_sdcard]
+pins: PB0
+
+########################################
+# TMC UART configuration
+########################################
+
+# For TMC UART
+#   1) Remove all jumpers below the stepper drivers.
+#   2) Place jumper on the left and middle pin of the three pin header.
+
+#[tmc2208 stepper_x]
+#uart_pin: PG3
+#tx_pin: PJ2
+#run_current: 0.8
+#stealthchop_threshold: 999999
+
+#[tmc2208 stepper_y]
+#uart_pin: PJ3
+#tx_pin: PJ4
+#run_current: 0.8
+#stealthchop_threshold: 999999
+
+#[tmc2208 stepper_z]
+#uart_pin: PE2
+#tx_pin: PE6
+#run_current: 0.8
+#stealthchop_threshold: 999999
+
+#[tmc2208 extruder]
+#uart_pin: PJ5
+#tx_pin: PJ6
+#run_current: 0.8
+#stealthchop_threshold: 999999
+
+#[tmc2208 extruder1]
+#uart_pin: PE7
+#tx_pin: PD4
+#run_current: 0.8
+#stealthchop_threshold: 999999
+
+#[tmc2208 extruder2]
+#uart_pin: PA1
+#tx_pin: PD5
+#run_current: 0.8
+#stealthchop_threshold: 999999
+
+########################################
+# TMC SPI configuration
+########################################
+
+# For TMC SPI
+#   1) Remove all jumpers below the stepper drivers.
+#   2) Place jumper on the middle and right pin of the small three pin header.
+#   3) Place jumpers on the four small two pin headers.
+
+# For TMC Sensorless homing / DIAG1
+#   1) Place jumper on the small two pin header near the endstop.
+
+#[tmc2130 stepper_x]
+#cs_pin: PG4
+#diag1_pin: PK1
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2130 stepper_y]
+#cs_pin: PG2
+#diag1_pin: PJ1
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2130 stepper_z]
+#cs_pin: PJ7
+#diag1_pin: PB6
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2130 extruder]
+#cs_pin: PL2
+#diag1_pin: PE4
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2130 extruder1]
+#cs_pin: PC5
+#diag1_pin: PJ0
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2130 extruder2]
+#cs_pin: PL7
+#diag1_pin: PK2
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+########################################
+# EXP1 / EXP2 (display) pins
+########################################
+
+# These must be turned 180° when compared to the default RAMPS layout.
+# The aliases below are 180° turned from what Fysetc considers pin 1,
+# but visually correspond to the plugs on the board.
+
+[board_pins]
+aliases:
+    # EXP1 header
+    EXP1_1=PC0, EXP1_2=PC2,
+    EXP1_3=PH0, EXP1_4=PH1,
+    EXP1_5=PA1, EXP1_6=PA3,    # Slot in the socket on this side
+    EXP1_7=PA5, EXP1_8=PA7,
+    EXP1_9=<GND>, EXP1_10=<5V>,
+
+    # EXP2 header
+    EXP2_1=PB3, EXP2_2=PB1,
+    EXP2_3=PC6, EXP2_4=PB0,
+    EXP2_5=PC4, EXP2_6=PB2,    # Slot in the socket on this side
+    EXP2_7=PL0, EXP2_8=<RST>,
+    EXP2_9=<GND>, EXP2_10=<5V> # or PG0 via jumper
+
+# See the sample-lcd.cfg file for definitions of common LCD displays.
+
+########################################
+# Servos
+########################################
+
+# All Servo pins support hardware PWM.
+
+#[servo my_servo1]
+#pin: PB7
+
+#[servo my_servo2]
+#pin: PB5
+
+#[servo my_servo3]
+#pin: PB4
+
+#[servo my_servo4]
+#pin: PG5
+
+########################################
+# RGB header
+########################################
+
+# All RGB pins support hardware PWM.
+
+#[output_pin blue]
+#pin: PH6
+
+#[output_pin red]
+#pin: PE5
+
+#[output_pin green]
+#pin: PG5
+
+########################################
+# AUX-1 header
+########################################
+
+# Various analog and digital pins
+# PK0 (analog), PK3 (analog), <GND>, <5V>
+# PE0 (RXD0)  , PE1 (TXD0)  , <GND>, <5V>
+
+########################################
+# SD header
+########################################
+
+# Various digital / SPI pins
+# PL0 , PB2, PB0, RST
+# <5V>, PB3, PB1, <GND>
+
+########################################
+# UART header
+########################################
+
+# Various digital / UART pins
+# <5V>
+# <GND>
+# PD2
+# PD3
+
+########################################
+# I2C header
+########################################
+
+# SCL, SDA, <5V>, <GND>

config/generic-fysetc-s6-v2.cfg

@@ -0,0 +1,204 @@
+# This file contains common pin mappings for the Fysetc S6 v2 board.  To use
+# this config, the firmware should be compiled for the STM32F446 with a "64KiB
+# bootloader".  When calling "menuconfig", enable "extra low-level configuration
+# setup" and select the "12MHz crystal" as clock reference.
+
+# See docs/Config_Reference.md for a description of parameters.
+
+[stepper_x]
+step_pin: PE11
+dir_pin: PE10
+enable_pin: !PE9
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^PB14  # PA1 for X-max
+position_endstop: 0
+position_max: 200
+
+[stepper_y]
+step_pin: PD8
+dir_pin: PB12
+enable_pin: !PD9
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^PB13  # PA2 for Y-max
+position_endstop: 0
+position_max: 200
+
+[stepper_z]
+step_pin: PD14
+dir_pin: PD13
+enable_pin: !PD15
+microsteps: 16
+rotation_distance: 8
+endstop_pin: ^PA0  # PA3 for Z-max
+position_endstop: 0
+position_max: 400
+
+[extruder]
+step_pin: PD5
+dir_pin: !PD6
+enable_pin: !PD4
+microsteps: 16
+rotation_distance: 33.500
+nozzle_diameter: 0.400
+filament_diameter: 1.750
+heater_pin: PB3
+sensor_type: EPCOS 100K B57560G104F
+sensor_pin: PC0
+control: pid
+pid_Kp: 22
+pid_Ki: 1.08
+pid_Kd: 114
+min_temp: 0
+max_temp: 260
+
+#[extruder1]
+#step_pin: PE6
+#dir_pin: !PC13
+#enable_pin: !PE5
+#heater_pin: PB4
+#sensor_pin: PC1
+
+#[extruder2]
+#step_pin: PE2
+#dir_pin: !PE4
+#enable_pin: !PE3
+#heater_pin: PB15
+#sensor_pin: PC2
+
+[heater_bed]
+heater_pin: PC8
+sensor_type: EPCOS 100K B57560G104F
+sensor_pin: PC3
+control: watermark
+min_temp: 0
+max_temp: 130
+
+#fan for printed model FAN0
+[fan]
+pin: PB0
+
+#fan for hotend FAN1
+#[heater_fan heatbreak_cooling_fan]
+#pin: PB1
+#shutdown_speed: 1
+
+#fan for control board FAN2
+#[heater_fan my_control_fan]
+#pin: PB2
+
+[mcu]
+serial: /dev/serial/by-id/usb-Klipper_Klipper_firmware_12345-if00
+
+[printer]
+kinematics: cartesian
+max_velocity: 300
+max_accel: 3000
+max_z_velocity: 5
+max_z_accel: 100
+
+
+########################################
+# TMC UART configuration
+########################################
+
+#[tmc2208 stepper_x]
+#uart_pin: PE8
+#run_current: 0.8
+#stealthchop_threshold: 999999
+
+#[tmc2208 stepper_y]
+#uart_pin: PC4
+#run_current: 0.8
+#stealthchop_threshold: 999999
+
+#[tmc2208 stepper_z]
+#uart_pin: PD12
+#run_current: 0.8
+#stealthchop_threshold: 999999
+
+#[tmc2208 extruder]
+#uart_pin: PA15
+#run_current: 0.8
+#stealthchop_threshold: 999999
+
+#[tmc2208 extruder1]
+#uart_pin: PC5
+#run_current: 0.8
+#stealthchop_threshold: 999999
+
+#[tmc2208 extruder2]
+#uart_pin: PE0
+#run_current: 0.8
+#stealthchop_threshold: 999999
+
+
+########################################
+# TMC SPI configuration
+########################################
+
+#[tmc2130 stepper_x]
+#spi_bus: spi4
+#cs_pin: PE7
+#diag1_pin: PB14
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2130 stepper_y]
+#spi_bus: spi4
+#cs_pin: PE15
+#diag1_pin: PB13
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2130 stepper_z]
+#spi_bus: spi4
+#cs_pin: PD10
+#diag1_pin: PA0
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2130 extruder]
+#spi_bus: spi4
+#cs_pin: PD7
+#diag1_pin: PA3
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2130 extruder1]
+#spi_bus: spi4
+#cs_pin: PC14
+#diag1_pin: PA2
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2130 extruder2]
+#spi_bus: spi4
+#cs_pin: PC15
+#diag1_pin: PA1
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+
+########################################
+# EXP1 / EXP2 (display) pins
+########################################
+
+[board_pins]
+aliases:
+    # EXP1 header
+    EXP1_1=PC9, EXP1_2=PA8,
+    EXP1_3=PC11, EXP1_4=PD2,
+    EXP1_5=PC10, EXP1_6=PC12,    # Slot in the socket on this side
+    EXP1_7=PD0, EXP1_8=PD1,
+    EXP1_9=<GND>, EXP1_10=<5V>,
+
+    # EXP2 header
+    EXP2_1=PA6, EXP2_2=PA5,
+    EXP2_3=PC6, EXP2_4=PA4,
+    EXP2_5=PC7, EXP2_6=PA7,      # Slot in the socket on this side
+    EXP2_7=PB10, EXP2_8=<RST>,
+    EXP2_9=<GND>, EXP2_10=<5V>
+
+# See the sample-lcd.cfg file for definitions of common LCD displays.

config/generic-fysetc-s6.cfg

@@ -0,0 +1,256 @@
+# This file contains common pin mappings for the Fysetc S6 board.  To use this
+# config, the firmware should be compiled for the STM32F446 with a "64KiB
+# bootloader".  When calling "menuconfig", enable "extra low-level configuration
+# setup" and select the "12MHz crystal" as clock reference.
+
+# See docs/Config_Reference.md for a description of parameters.
+
+[stepper_x]
+step_pin: PE11
+dir_pin: PE10
+enable_pin: !PE12
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^PB14  # PA1 for X-max
+position_endstop: 0
+position_max: 200
+
+[stepper_y]
+step_pin: PD8
+dir_pin: PB12
+enable_pin: !PD9
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^PB13  # PA2 for Y-max
+position_endstop: 0
+position_max: 200
+
+[stepper_z]
+step_pin: PD14
+dir_pin: PD13
+enable_pin: !PD15
+microsteps: 16
+rotation_distance: 8
+endstop_pin: ^PA0  # PA3 for Z-max (and servo)
+position_endstop: 0
+position_max: 400
+
+[extruder]
+step_pin: PD5
+dir_pin: !PD6
+enable_pin: !PD4
+microsteps: 16
+rotation_distance: 33.500
+nozzle_diameter: 0.400
+filament_diameter: 1.750
+heater_pin: PB3
+sensor_type: EPCOS 100K B57560G104F
+sensor_pin: PC0
+control: pid
+pid_Kp: 22
+pid_Ki: 1.08
+pid_Kd: 114
+min_temp: 0
+max_temp: 260
+
+#[extruder1]
+#step_pin: PE6
+#dir_pin: !PC13
+#enable_pin: !PE5
+#heater_pin: PB4
+#sensor_pin: PC1
+
+#[extruder2]
+#step_pin: PE2
+#dir_pin: !PE4
+#enable_pin: !PE3
+#heater_pin: PB15
+#sensor_pin: PC2
+
+[heater_bed]
+heater_pin: PC8
+sensor_type: EPCOS 100K B57560G104F
+sensor_pin: PC3
+control: watermark
+min_temp: 0
+max_temp: 130
+
+#fan for printed model FAN0
+[fan]
+pin: PB0
+
+#fan for hotend FAN1
+#[heater_fan heatbreak_cooling_fan]
+#pin: PB1
+#shutdown_speed: 1
+
+#fan for control board FAN2
+#[heater_fan my_control_fan]
+#pin: PB2
+
+[mcu]
+serial: /dev/serial/by-id/usb-Klipper_Klipper_firmware_12345-if00
+
+[printer]
+kinematics: cartesian
+max_velocity: 300
+max_accel: 3000
+max_z_velocity: 5
+max_z_accel: 100
+
+########################################
+# TMC UART configuration
+########################################
+
+# For TMC UART
+#   1) Remove all jumpers below the stepper drivers.
+#   2) Place a jumper on the "PDN-EN" two-pin header.
+
+# For TMC Sensorless homing / DIAG1
+#   1) Place a jumper on the two pin header near the endstop.
+
+#[tmc2208 stepper_x]
+#uart_pin: PE8
+#tx_pin: PE9
+#run_current: 0.8
+#stealthchop_threshold: 999999
+
+#[tmc2208 stepper_y]
+#uart_pin: PE13
+#tx_pin: PE14
+#run_current: 0.8
+#stealthchop_threshold: 999999
+
+#[tmc2208 stepper_z]
+#uart_pin: PD12
+#tx_pin: PD11
+#run_current: 0.8
+#stealthchop_threshold: 999999
+
+#[tmc2208 extruder]
+#uart_pin: PA15
+#tx_pin: PD3
+#run_current: 0.8
+#stealthchop_threshold: 999999
+
+#[tmc2208 extruder1]
+#uart_pin: PC5
+#tx_pin: PC4
+#run_current: 0.8
+#stealthchop_threshold: 999999
+
+#[tmc2208 extruder2]
+#uart_pin: PE0
+#tx_pin: PE1
+#run_current: 0.8
+#stealthchop_threshold: 999999
+
+########################################
+# TMC SPI configuration
+########################################
+
+# For TMC SPI
+#   1) Remove four jumpers below the stepper drivers, connecting the outermost and middle pins of each row.
+
+# For TMC Sensorless homing / DIAG1
+#   1) Place a jumper on the two pin header near the endstop.
+
+# SPI pins:
+# SCK   PA5
+# MISO  PA6
+# MOSI  PA7
+
+#[tmc2130 stepper_x]
+#spi_bus: spi1
+#cs_pin: PE7
+#diag1_pin: PB14
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2130 stepper_y]
+#spi_bus: spi1
+#cs_pin: PE15
+#diag1_pin: PB13
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2130 stepper_z]
+#spi_bus: spi1
+#cs_pin: PD10
+#diag1_pin: PA0
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2130 extruder]
+#spi_bus: spi1
+#cs_pin: PD7
+#diag1_pin: PA3
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2130 extruder1]
+#spi_bus: spi1
+#cs_pin: PC14
+#diag1_pin: PA2
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2130 extruder2]
+#spi_bus: spi1
+#cs_pin: PC15
+#diag1_pin: PA1
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+########################################
+# EXP1 / EXP2 (display) pins
+########################################
+
+# These must be turned 180° when compared to the default RAMPS layout.
+# The aliases below are 180° turned from what Fysetc considers pin 1,
+# but visually correspond to the plugs on the board.
+
+[board_pins]
+aliases:
+    # EXP1 header
+    EXP1_1=PC9, EXP1_2=PA8,
+    EXP1_3=PC11, EXP1_4=PD2,
+    EXP1_5=PC10, EXP1_6=PC12,    # Slot in the socket on this side
+    EXP1_7=PD0, EXP1_8=PD1,
+    EXP1_9=<GND>, EXP1_10=<5V>,
+
+    # EXP2 header
+    EXP2_1=PA6, EXP2_2=PA5,
+    EXP2_3=PC6, EXP2_4=PA4,
+    EXP2_5=PC7, EXP2_6=PA7,      # Slot in the socket on this side
+    EXP2_7=PB10, EXP2_8=<RST>,
+    EXP2_9=<GND>, EXP2_10=<5V>
+
+# See the sample-lcd.cfg file for definitions of common LCD displays.
+
+########################################
+# RGB header
+########################################
+
+#[output_pin blue]
+#pin: PB7
+
+#[output_pin red]
+#pin: PB6
+
+#[output_pin green]
+#pin: PB5
+
+########################################
+# Servo
+########################################
+
+#[servo my_servo1]
+#pin: PA3  # shared with ZMAX
+
+########################################
+# AUX-3 / SPI header
+########################################
+
+# <CD>, <MOSI>, SS, <RESET>
+# <5V>  , MISO  , SCK, <GND>

config/generic-fysetc-spider.cfg

@@ -0,0 +1,248 @@
+# This file contains common pin mappings for the Fysetc Spider board.
+# To use this config, the firmware should be compiled for the STM32F446.
+# When calling "menuconfig", enable "extra low-level configuration setup"
+# and select the "12MHz crystal" as clock reference.
+# For flashing, write the compiled klipper.bin to memory location 0x08000000
+
+# See docs/Config_Reference.md for a description of parameters.
+
+[stepper_x]
+step_pin: PE11
+dir_pin: PE10
+enable_pin: !PE9
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^PB14  # PA1 for X-max
+position_endstop: 0
+position_max: 200
+
+[stepper_y]
+step_pin: PD8
+dir_pin: PB12
+enable_pin: !PD9
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^PB13  # PA2 for Y-max
+position_endstop: 0
+position_max: 200
+
+[stepper_z]
+step_pin: PD14
+dir_pin: PD13
+enable_pin: !PD15
+microsteps: 16
+rotation_distance: 8
+endstop_pin: ^PA0  # PA3 for Z-max
+position_endstop: 0
+position_max: 400
+
+[extruder]
+step_pin: PD5
+dir_pin: !PD6
+enable_pin: !PD4
+microsteps: 16
+rotation_distance: 33.500
+nozzle_diameter: 0.400
+filament_diameter: 1.750
+heater_pin: PB15
+sensor_type: EPCOS 100K B57560G104F
+sensor_pin: PC0
+control: pid
+pid_Kp: 22
+pid_Ki: 1.08
+pid_Kd: 114
+min_temp: 0
+max_temp: 260
+
+#[extruder1]
+#step_pin: PE6
+#dir_pin: !PC13
+#enable_pin: !PE5
+#heater_pin: PC8
+#sensor_pin: PC1
+
+#[extruder2]
+#step_pin: PE2
+#dir_pin: !PE4
+#enable_pin: !PE3
+#heater_pin: PB3
+#sensor_pin: PC2
+
+#[extruder3]
+#step_pin: PD12
+#dir_pin: PC4
+#enable_pin: !PE8
+
+#[extruder4]
+#step_pin: PE1
+#dir_pin: !PE0
+#enable_pin: !PC5
+
+[heater_bed]
+heater_pin: PB4
+sensor_type: EPCOS 100K B57560G104F
+sensor_pin: PC3
+control: watermark
+min_temp: 0
+max_temp: 130
+
+#fan for printed model FAN0
+[fan]
+pin: PB0
+
+#fan for hotend FAN1
+#[heater_fan heatbreak_cooling_fan]
+#pin: PB1
+#shutdown_speed: 1
+
+#fan for control board FAN2
+#[heater_fan my_control_fan]
+#pin: PB2
+
+#####################################################################
+# LED Control
+#####################################################################
+
+#[output_pin caselight ]
+##  Chamber Lighting - In 5V-RGB Position
+#pin: PD3
+#pwm: true
+#shutdown_value: 0
+#value:100
+#cycle_time: 0.01
+
+[mcu]
+## Obtain definition by "ls -l /dev/serial/by-id/" then unplug to verify
+serial: /dev/serial/by-id/usb-Klipper_Klipper_firmware_12345-if00
+
+[printer]
+kinematics: cartesian
+max_velocity: 300
+max_accel: 3000
+max_z_velocity: 5
+max_z_accel: 100
+
+########################################
+# TMC UART configuration
+########################################
+
+#[tmc2208 stepper_x]
+#uart_pin: PE7
+#run_current: 0.8
+#stealthchop_threshold: 999999
+
+#[tmc2208 stepper_y]
+#uart_pin: PE15
+#run_current: 0.8
+#stealthchop_threshold: 999999
+
+#[tmc2208 stepper_z]
+#uart_pin: PD10
+#run_current: 0.8
+#stealthchop_threshold: 999999
+
+#[tmc2208 extruder]
+#uart_pin: PD7
+#run_current: 0.8
+#sense_resistor: 0.110
+#stealthchop_threshold: 999999
+
+#[tmc2208 extruder1]
+#uart_pin: PC14
+#run_current: 0.8
+#stealthchop_threshold: 999999
+
+#[tmc2208 extruder2]
+#uart_pin: PC15
+#run_current: 0.8
+#stealthchop_threshold: 999999
+
+#[tmc2208 extruder3]
+#uart_pin: PA15
+#run_current: 0.8
+#stealthchop_threshold: 999999
+
+#[tmc2208 extruder4]
+#uart_pin: PD11
+#run_current: 0.8
+#stealthchop_threshold: 999999
+
+########################################
+# TMC SPI configuration
+########################################
+
+#[tmc2130 stepper_x]
+#spi_bus: spi4
+#cs_pin: PE7
+#diag1_pin: PB14
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2130 stepper_y]
+#spi_bus: spi4
+#cs_pin: PE15
+#diag1_pin: PB13
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2130 stepper_z]
+#spi_bus: spi4
+#cs_pin: PD10
+#diag1_pin: PA0
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2130 extruder]
+#spi_bus: spi4
+#cs_pin: PD7
+#diag1_pin: PA3
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2130 extruder1]
+#spi_bus: spi4
+#cs_pin: PC14
+#diag1_pin: PA2
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2130 extruder2]
+#spi_bus: spi4
+#cs_pin: PC15
+#diag1_pin: PA1
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2130 extruder3]
+#spi_bus: spi4
+#cs_pin: PA15
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2130 extruder4]
+#spi_bus: spi4
+#cs_pin: PD11
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+########################################
+# EXP1 / EXP2 (display) pins
+########################################
+
+[board_pins]
+aliases:
+    # EXP2 header
+    EXP1_10=<5V>, EXP1_9=<GND>,
+    EXP1_8=PD1,   EXP1_7=PD0,
+    EXP1_6=PC12,  EXP1_5=PC10,     # Slot in the socket on the other side
+    EXP1_4=PD2,   EXP1_3=PC11,
+    EXP1_2=PA8,   EXP1_1=PC9,
+
+    # EXP1 header
+    EXP2_10=<5V>, EXP2_9=<GND>,
+    EXP2_8=<RST>, EXP2_7=PB10,
+    EXP2_6=PA7,   EXP2_5=PC7,       # Slot in the socket on the other side
+    EXP2_4=PA4,   EXP2_3=PC6,
+    EXP2_2=PA5,   EXP2_1=PA6
+
+# See the sample-lcd.cfg file for definitions of common LCD displays.

config/generic-gt2560.cfg

@@ -0,0 +1,91 @@
+# This file contains common pin mappings for the Geeetech GT2560
+# board. GT2560 board uses a firmware compiled for the AVR
+# atmega2560.
+
+# See docs/Config_Reference.md for a description of parameters.
+
+[stepper_x]
+step_pin: PA3
+dir_pin: PA1
+enable_pin: !PA5
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^PA0
+position_endstop: 0
+position_max: 200
+homing_speed: 30
+
+[stepper_y]
+step_pin: PC6
+dir_pin: PC4
+enable_pin: !PA7
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^PA4
+position_endstop: 0
+position_max: 200
+homing_speed: 30
+
+[stepper_z]
+step_pin: PC0
+dir_pin: !PG2
+enable_pin: !PC2
+microsteps: 16
+rotation_distance: 8
+endstop_pin: ^PC7
+position_endstop: 0
+position_max: 200
+position_min: 0.0
+
+[extruder]
+step_pin: PL6
+dir_pin: PL4
+enable_pin: !PG0
+microsteps: 16
+rotation_distance: 33.500
+nozzle_diameter: 0.4
+filament_diameter: 1.750
+heater_pin: PE4
+sensor_type: ATC Semitec 104GT-2
+sensor_pin: PK0
+min_temp: 0
+max_temp: 250
+control: pid
+pid_kp: 29.800
+pid_ki: 1.774
+pid_kd: 125.159
+
+[heater_bed]
+heater_pin: PG5
+sensor_type: ATC Semitec 104GT-2
+sensor_pin: PK2
+min_temp: 0
+max_temp: 120
+control: pid
+pid_kp: 63.041
+pid_ki: 2.898
+pid_kd: 342.787
+
+[fan]
+pin: PH4
+
+[mcu]
+serial: /dev/ttyUSB0
+
+[printer]
+kinematics: cartesian
+max_velocity: 200
+max_accel: 1500
+max_z_velocity: 20
+max_z_accel: 500
+
+[display]
+lcd_type: hd44780
+rs_pin: PD1
+e_pin: PH0
+d4_pin: PH1
+d5_pin: PD0
+d6_pin: PE3
+d7_pin: PH3
+encoder_pins: ^PL7, ^PG1
+click_pin: ^!PD2

config/generic-mellow-fly-cdy-v3.cfg

@@ -0,0 +1,216 @@
+# This file contains common pin mappings for the Mellow Fly-CDY-v3.
+# To use this config, the firmware should be compiled for the
+# STM32F407 with a "32KiB bootloader".
+
+# The "make flash" command does not work on the Fly-CDY-v3. Instead,
+# after running "make", copy the generated "out/klipper.bin" file to a
+# file named "firmware.bin" on an SD card and then restart the Fly-CDY-v3
+# with that SD card.
+
+# See docs/Config_Reference.md for a description of parameters.
+
+[stepper_x]
+step_pin: PE5
+dir_pin: PC0
+enable_pin: !PC1
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^PC7        # X-MAX PC6
+position_endstop: 0
+position_max: 200
+homing_speed: 50
+
+[stepper_y]
+step_pin: PE4
+dir_pin: !PC13
+enable_pin: !PC14
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^PD11       # Y-MAX PD10
+position_endstop: 0
+position_max: 200
+homing_speed: 50
+
+[stepper_z]
+step_pin: PE3
+dir_pin: PB7
+enable_pin: !PB8
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^PB10       # Z-MAX PB11
+position_endstop: 0.5
+position_max: 200
+
+[extruder]
+step_pin: PE2
+dir_pin: PD6
+enable_pin: !PD7
+microsteps: 16
+rotation_distance: 33.500
+nozzle_diameter: 0.400
+filament_diameter: 1.750
+heater_pin: PD12
+sensor_pin: PA3
+sensor_type: EPCOS 100K B57560G104F
+control: pid
+pid_Kp: 22.2
+pid_Ki: 1.08
+pid_Kd: 114
+min_temp: 0
+max_temp: 250
+
+#[extruder1]
+#step_pin: PE1
+#dir_pin: !PD3
+#enable_pin: !PD4
+#heater_pin: PD13
+#sensor_pin: PC4
+
+#[extruder2]
+#step_pin: PE0
+#dir_pin: !PA15
+#enable_pin: !PD0
+#heater_pin: PD14
+#sensor_pin: PC5
+
+[heater_bed]
+heater_pin: PB0
+sensor_type: Generic 3950
+sensor_pin: PB1
+control: watermark
+min_temp: 0
+max_temp: 130
+
+#FAN0
+[fan]
+pin: PA0
+
+#FAN1
+#[heater_fan fan1]
+#pin: PA1
+
+#FAN2
+#[heater_fan fan2]
+#pin: PA2
+
+
+[mcu]
+serial: /dev/serial/by-id/usb-Klipper_Klipper_firmware_12345-if00
+
+[printer]
+kinematics: cartesian
+max_velocity: 300
+max_accel: 3000
+max_z_velocity: 5
+max_z_accel: 100
+
+
+########################################
+# TMC2209 configuration
+########################################
+
+#[tmc2209 stepper_x]
+#uart_pin: PC15
+#run_current: 0.800
+#diag_pin: PC7
+#stealthchop_threshold: 999999
+
+#[tmc2209 stepper_y]
+#uart_pin: PA8
+#run_current: 0.800
+#diag_pin: PC6
+#stealthchop_threshold: 999999
+
+#[tmc2209 stepper_z]
+#uart_pin: PB6
+#run_current: 0.800
+#diag_pin: PD11
+#stealthchop_threshold: 999999
+
+#[tmc2209 extruder]
+#uart_pin: PD5
+#run_current: 0.600
+#diag_pin: PD10
+#stealthchop_threshold: 999999
+
+#[tmc2209 extruder1]
+#uart_pin: PD1
+#run_current: 0.600
+#diag_pin: PB10
+#stealthchop_threshold: 999999
+
+#[tmc2209 extruder2]
+#uart_pin: PE9
+#run_current: 0.600
+#diag_pin: PB11
+#stealthchop_threshold: 999999
+
+########################################
+# TMC5160 configuration
+########################################
+
+#[tmc5160 stepper_x]
+#cs_pin: PC15
+#spi_bus: spi3
+#run_current: 0.800
+#diag1_pin: PC7
+#stealthchop_threshold: 999999
+
+#[tmc5160 stepper_y]
+#cs_pin: PA8
+#spi_bus: spi3
+#run_current: 0.800
+#diag1_pin: PC6
+#stealthchop_threshold: 999999
+
+#[tmc5160 stepper_z]
+#cs_pin: PB6
+#spi_bus: spi3
+#run_current: 0.800
+#diag1_pin: PD11
+#stealthchop_threshold: 999999
+
+#[tmc5160 extruder]
+#cs_pin: PD5
+#spi_bus: spi3
+#run_current: 0.800
+#diag1_pin: PD10
+#stealthchop_threshold: 999999
+
+#[tmc5160 extruder1]
+#cs_pin: PD1
+#spi_bus: spi3
+#run_current: 0.800
+#diag1_pin: PB10
+#stealthchop_threshold: 999999
+
+#[tmc5160 extruder2]
+#cs_pin: PE9
+#spi_bus: spi3
+#run_current: 0.800
+#diag1_pin: PB11
+#stealthchop_threshold: 999999
+
+########################################
+# Accelerometer (ADXL345) pins
+########################################
+
+## SCK=PA5, MISO=PA6, MOSI=PA7
+#[adxl345]
+#cs_pin: PE7
+#spi_bus: spi1
+
+########################################
+# EXP1 / EXP2 (display) pins
+########################################
+
+[board_pins]
+aliases:
+    # EXP1 header
+    EXP1_1=<NC>, EXP1_3=PB2,  EXP1_5=PE15, EXP1_7=PA13,  EXP1_9=<GND>,
+    EXP1_2=PA9,  EXP1_4=PA10, EXP1_6=PE14, EXP1_8=PA14,  EXP1_10=<5V>,
+    # EXP2 header
+    EXP2_1=PA6,  EXP2_3=PD8,  EXP2_5=PD9,  EXP2_7=PE13,  EXP2_9=<GND>,
+    EXP2_2=PA5,  EXP2_4=PA4,  EXP2_6=PA7,  EXP2_8=<RST>, EXP2_10=<NC>,
+
+# See the sample-lcd.cfg file for definitions of common LCD displays.

config/generic-mellow-fly-gemini-v1.cfg

@@ -0,0 +1,157 @@
+# This file contains common pin mappings for the Mellow Fly-Gemini-v1.
+# To use this config, the firmware should be compiled for the
+# STM32F405 with a "32KiB bootloader".
+
+# The "make flash" command does not work on the Fly-Gemini-v1. Instead,
+# after running "make", copy the generated "out/klipper.bin" file to a
+# file named "firmware.bin" or "klipper.bin" on an SD card and then restart the Fly-Gemini-v1
+# with that SD card.
+
+# See docs/Config_Reference.md for a description of parameters.
+
+[stepper_x]
+step_pin: PC13
+dir_pin: PC1
+enable_pin: !PB2
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^PA3
+position_endstop: 0
+position_max: 200
+homing_speed: 50
+
+[stepper_y]
+step_pin: PC14
+dir_pin: !PC4
+enable_pin: !PB6
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^PB1
+position_endstop: 0
+position_max: 200
+homing_speed: 50
+
+[stepper_z]
+step_pin: PC15
+dir_pin: PC5
+enable_pin: !PB5
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^PB10
+position_endstop: 0.5
+position_max: 200
+
+[extruder]
+step_pin: PC3
+dir_pin: PC7
+enable_pin: !PB4
+microsteps: 16
+rotation_distance: 33.500
+nozzle_diameter: 0.400
+filament_diameter: 1.750
+heater_pin: PA0
+sensor_type: EPCOS 100K B57560G104F
+sensor_pin: PC0
+control: pid
+pid_Kp: 22.2
+pid_Ki: 1.08
+pid_Kd: 114
+min_temp: 0
+max_temp: 250
+
+[heater_bed]
+heater_pin: PA2
+sensor_type: Generic 3950
+sensor_pin: PC2
+control: watermark
+min_temp: 0
+max_temp: 130
+
+[fan]
+pin: PC6
+
+[mcu]
+serial: /dev/serial/by-id/usb-Klipper_Klipper_firmware_12345-if00
+
+[printer]
+kinematics: cartesian
+max_velocity: 300
+max_accel: 3000
+max_z_velocity: 5
+max_z_accel: 100
+
+
+########################################
+# TMC2209 configuration
+########################################
+
+#[tmc2209 stepper_x]
+#uart_pin: PB11
+#run_current: 0.800
+#diag_pin: PA3
+#stealthchop_threshold: 999999
+
+#[tmc2209 stepper_y]
+#uart_pin: PB9
+#run_current: 0.800
+#diag_pin: PB1
+#stealthchop_threshold: 999999
+
+#[tmc2209 stepper_z]
+#uart_pin: PB8
+#run_current: 0.800
+#diag_pin: PB10
+#stealthchop_threshold: 999999
+
+#[tmc2209 extruder]
+#uart_pin: PB7
+#run_current: 0.600
+#diag_pin:
+#stealthchop_threshold: 999999
+
+########################################
+# TMC5160 configuration
+########################################
+
+#[tmc5160 stepper_x]
+#cs_pin: PB11
+#spi_bus: spi1
+#run_current: 0.800
+#diag1_pin: PA3
+#stealthchop_threshold: 999999
+
+#[tmc5160 stepper_y]
+#cs_pin: PB9
+#spi_bus: spi1
+#run_current: 0.800
+#diag1_pin: PB1
+#stealthchop_threshold: 999999
+
+#[tmc5160 stepper_z]
+#cs_pin: PB8
+#spi_bus: spi1
+#run_current: 0.800
+#diag1_pin: PB10
+#stealthchop_threshold: 999999
+
+#[tmc5160 extruder]
+#cs_pin: PB7
+#spi_bus: spi1
+#run_current: 0.800
+#diag1_pin:
+#stealthchop_threshold: 999999
+
+########################################
+# EXP1 / EXP2 (display) pins
+########################################
+
+[board_pins]
+aliases:
+    # EXP1 header
+    EXP1_1=<NC>, EXP1_3=PA13,  EXP1_5=PA9,   EXP1_7=<NC>,  EXP1_9=<GND>,
+    EXP1_2=PA4,  EXP1_4=PA10,  EXP1_6=PA8,   EXP1_8=<NC>,  EXP1_10=<5V>,
+    # EXP2 header
+    EXP2_1=PB14, EXP2_3=PA15,  EXP2_5=PA14,  EXP2_7=PB3,   EXP2_9=<GND>,
+    EXP2_2=PB13, EXP2_4=PB12,  EXP2_6=PB15,  EXP2_8=<RST>, EXP2_10=<NC>,
+
+# See the sample-lcd.cfg file for definitions of common LCD displays.

config/generic-mellow-fly-gemini-v2.cfg

@@ -0,0 +1,161 @@
+# This file contains common pin mappings for the Mellow Fly-Gemini-v2.
+# To use this config, the firmware should be compiled for the
+# STM32F405 with a "32KiB bootloader".
+
+# The "make flash" command does not work on the Fly-Gemini-v2. Instead,
+# after running "make", copy the generated "out/klipper.bin" file to a
+# file named "firmware.bin" or "klipper.bin" on an SD card and then restart the Fly-Gemini-v2
+# with that SD card.
+
+# See docs/Config_Reference.md for a description of parameters.
+
+[stepper_x]
+step_pin: PC13
+dir_pin: PC1
+enable_pin: !PB2
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^PA3
+position_endstop: 0
+position_max: 200
+homing_speed: 50
+
+[stepper_y]
+step_pin: PC14
+dir_pin: !PC4
+enable_pin: !PD2
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^PB1
+position_endstop: 0
+position_max: 200
+homing_speed: 50
+
+[stepper_z]
+step_pin: PC15
+dir_pin: PC5
+enable_pin: !PC12
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^PB10
+position_endstop: 0.5
+position_max: 200
+
+[extruder]
+step_pin: PC3
+dir_pin: PC8
+enable_pin: !PC11
+microsteps: 16
+rotation_distance: 33.500
+nozzle_diameter: 0.400
+filament_diameter: 1.750
+heater_pin: PA0
+sensor_type: EPCOS 100K B57560G104F
+sensor_pin: PC0
+control: pid
+pid_Kp: 22.2
+pid_Ki: 1.08
+pid_Kd: 114
+min_temp: 0
+max_temp: 250
+
+[heater_bed]
+heater_pin: PA2
+sensor_type: Generic 3950
+sensor_pin: PC2
+control: watermark
+min_temp: 0
+max_temp: 130
+
+[fan]
+pin: PC6
+
+#FAN1
+#[heater_fan fan1]
+#pin: PC7
+
+[mcu]
+serial: /dev/serial/by-id/usb-Klipper_Klipper_firmware_12345-if00
+
+[printer]
+kinematics: cartesian
+max_velocity: 300
+max_accel: 3000
+max_z_velocity: 5
+max_z_accel: 100
+
+
+########################################
+# TMC2209 configuration
+########################################
+
+#[tmc2209 stepper_x]
+#uart_pin: PB11
+#run_current: 0.800
+#diag_pin: PA3
+#stealthchop_threshold: 999999
+
+#[tmc2209 stepper_y]
+#uart_pin: PB9
+#run_current: 0.800
+#diag_pin: PB1
+#stealthchop_threshold: 999999
+
+#[tmc2209 stepper_z]
+#uart_pin: PB8
+#run_current: 0.800
+#diag_pin: PB10
+#stealthchop_threshold: 999999
+
+#[tmc2209 extruder]
+#uart_pin: PB7
+#run_current: 0.600
+#diag_pin:
+#stealthchop_threshold: 999999
+
+########################################
+# TMC5160 configuration
+########################################
+
+#[tmc5160 stepper_x]
+#cs_pin: PB11
+#spi_bus: spi1
+#run_current: 0.800
+#diag1_pin: PA3
+#stealthchop_threshold: 999999
+
+#[tmc5160 stepper_y]
+#cs_pin: PB9
+#spi_bus: spi1
+#run_current: 0.800
+#diag1_pin: PB1
+#stealthchop_threshold: 999999
+
+#[tmc5160 stepper_z]
+#cs_pin: PB8
+#spi_bus: spi1
+#run_current: 0.800
+#diag1_pin: PB10
+#stealthchop_threshold: 999999
+
+#[tmc5160 extruder]
+#cs_pin: PB7
+#spi_bus: spi1
+#run_current: 0.800
+#diag1_pin:
+#stealthchop_threshold: 999999
+
+########################################
+# EXP1 / EXP2 (display) pins
+########################################
+
+[board_pins]
+aliases:
+    # EXP1 header
+    EXP1_1=PC9,  EXP1_3=PA13,  EXP1_5=PA9,   EXP1_7=<NC>,  EXP1_9=<GND>,
+    EXP1_2=PB6,  EXP1_4=PA10,  EXP1_6=PA8,   EXP1_8=<NC>,  EXP1_10=<5V>,
+    # EXP2 header
+    EXP2_1=PB14, EXP2_3=PA15,  EXP2_5=PA14,  EXP2_7=PC10,   EXP2_9=<GND>,
+    EXP2_2=PB13, EXP2_4=PB12,  EXP2_6=PB15,  EXP2_8=<RST>, EXP2_10=<NC>,
+
+# See the sample-lcd.cfg file for definitions of common LCD displays.

config/generic-mellow-super-infinty-hv.cfg

@@ -0,0 +1,311 @@
+# This file contains common pin mappings for the 8 stepper motor "Mellow Super
+# 8 HV Board" board. To use this config, the firmware should be compiled for
+# the STM32F407 with a "32KiB bootloader".
+
+# The "make flash" command does not work on the Super 8 HV. Instead, after
+# running "make", copy the generated "out/klipper.bin" file to a file named
+# "firmware.bin" on an SD card and then restart the Super 8 HV with that SD card.
+
+# Serial options:
+#  * PA11/PA12 for serial over USB
+#  * PA9 /PA10 for serial UART
+#  * PD8 /PD9  for serial UART (to ESP32 module)
+
+# See docs/Config_Reference.md for a description of parameters.
+
+[stepper_x]
+step_pin: PE2  # Drive0
+dir_pin: PC5
+enable_pin: !PF11
+microsteps: 16
+rotation_distance: 40
+endstop_pin: PG12  # IO0
+position_endstop: 0
+position_max: 200
+homing_speed: 50
+
+[stepper_y]
+step_pin: PE3  # Drive1
+dir_pin: PF13
+enable_pin: !PF14
+microsteps: 16
+rotation_distance: 40
+endstop_pin: PG11  # IO1
+position_endstop: 0
+position_max: 200
+homing_speed: 50
+
+[stepper_z]
+step_pin: PE4  # Drive2
+dir_pin: PG0
+enable_pin: !PG1
+microsteps: 16
+rotation_distance: 8
+endstop_pin: PG10  # IO2
+position_endstop: 0.5
+position_max: 200
+
+[extruder]
+step_pin: PE14
+dir_pin: PE8
+enable_pin: !PE9
+microsteps: 16
+rotation_distance: 33.500
+nozzle_diameter: 0.400
+filament_diameter: 1.750
+heater_pin: PB0 # Heat0
+sensor_pin: PF4 # ADC_0
+sensor_type: EPCOS 100K B57560G104F
+control: pid
+pid_Kp: 22.2
+pid_Ki: 1.08
+pid_Kd: 114
+min_temp: 0
+max_temp: 350
+
+#[extruder1]
+#step_pin: PE15
+#dir_pin: PE11
+#enable_pin: !PF2
+#heater_pin: PB1  # Heat1
+#sensor_pin: PF5  # ADC_1
+#...
+
+#[extruder2]
+#step_pin: PE1
+#dir_pin: PF0
+#enable_pin: !PC15
+#heater_pin: PC7  # Heat2
+#sensor_pin: PF9  # ADC_2
+#...
+
+#[extruder3]
+#step_pin: PE0
+#dir_pin: PG3
+#enable_pin: !PG4
+#heater_pin: PF7  # Heat3
+#sensor_pin: PF10 # ADC_3
+#...
+
+#[extruder4]
+#step_pin: PE6
+#dir_pin: PG6
+#enable_pin: !PG7
+#heater_pin: PF6  # Heat4
+#sensor_pin: PC0  # ADC_4
+#...
+
+[heater_bed]
+heater_pin: PE5   # BED
+sensor_pin: PC1   # ADC_5
+sensor_type: ATC Semitec 104GT-2
+control: watermark
+min_temp: 0
+max_temp: 200
+
+# BLTouch port, has <GND>,<5V>,<CTRL>,<GND>,<PROBE>
+#[bltouch]
+#sensor_pin: ^PC3
+#control_pin: PC6
+#...
+
+# Accelerometer port, has <5V>,<GND>,<MISO>,<MOSI>,<INT>,<CS>,<SCLK>
+#[adxl345]
+#spi_speed: 5000
+#spi_software_miso_pin: PD0
+#spi_software_mosi_pin: PD1
+##interrupt: PD3
+#cs_pin: PD4
+#spi_software_sclk_pin: PD5
+#axes_map: x,y,z
+#rate: 3200
+
+[fan]
+pin: PA0  # Fan0
+
+[heater_fan fan1]
+pin: PA1
+
+#[heater_fan fan2]
+#pin: PA2
+
+#[heater_fan fan3]
+#pin: PA3
+
+#[heater_fan fan4]
+#pin: PA15
+
+#[heater_fan fan5]
+#pin: PB11
+
+#[heater_fan fan6]
+#pin: PB10
+
+#[heater_fan fan7]
+#pin: PD12
+
+#[heater_fan fan8]
+#pin: PD14
+
+#[heater_fan fan9]
+#pin: PD15
+
+[mcu]
+serial: /dev/serial/by-id/usb-Klipper_Klipper_firmware_12345-if00
+
+[printer]
+kinematics: corexy
+max_velocity: 300
+max_accel: 3000
+max_z_velocity: 5
+max_z_accel: 100
+
+########################################
+# Stand-alone configuration
+########################################
+#
+# Jumpers A,B,C,D for stand-alone module is as follows:
+#
+#  +-+-+-+-+
+#  |A|B|C|D|  B = MS3
+#  |A|B|C|D|  C = MS2
+#  |.|.|.|.|  D = MS1
+#  +-+-+-+-+
+
+
+########################################
+# TMC2208 configuration
+########################################
+#
+# Jumper A for the stepStick module in UART mode is as follows:
+#
+#  +-+-+-+-+
+#  |.|.|.|.|
+#  |.|A|.|.|
+#  |.|A|.|.|
+#  +-+-+-+-+
+
+#[tmc2208 stepper_x]
+#uart_pin: PC4
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2208 stepper_y]
+#uart_pin: PF12
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2208 stepper_z]
+#uart_pin: PF15
+#run_current: 0.650
+#stealthchop_threshold: 999999
+
+#[tmc2208 extruder]
+#uart_pin: PE7
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2208 extruder1]
+#uart_pin: PE10
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2208 extruder2]
+#uart_pin: PF1
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2208 extruder3]
+#uart_pin: PG2
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2208 extruder4]
+#uart_pin: PG5
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+
+########################################
+# TMC5160 configuration
+########################################
+#
+# Jumpers A,B,C,D for the stepStick module in SPI mode is as follows:
+#
+#  +-+-+-+-+
+#  |.|.|.|.|
+#  |A|B|C|D|
+#  |A|B|C|D|
+#  +-+-+-+-+
+
+#[tmc5160 stepper_x]
+#cs_pin: PC4
+#spi_bus: spi3
+##diag1_pin: PG12
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc5160 stepper_y]
+#cs_pin: PF12
+#spi_bus: spi3
+##diag1_pin: PG11
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc5160 stepper_z]
+#cs_pin: PF15
+#spi_bus: spi3
+##diag1_pin: PG10
+#run_current: 0.650
+#stealthchop_threshold: 999999
+
+#[tmc5160 extruder]
+#cs_pin: PE7
+#spi_bus: spi3
+##diag1_pin: PG9
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc5160 extruder1]
+#cs_pin: PE10
+#spi_bus: spi3
+##diag1_pin: PD7
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc5160 extruder2]
+#cs_pin: PF1
+#spi_bus: spi3
+##diag1_pin: PD6
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc5160 extruder3]
+#cs_pin: PG2
+#spi_bus: spi3
+##diag1_pin: PA8
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc5160 extruder4]
+#cs_pin: PG5
+#spi_bus: spi3
+##diag1_pin: PF3
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+
+########################################
+# EXP1 / EXP2 (display) pins
+########################################
+
+[board_pins]
+aliases:
+    # EXP1 header
+    EXP1_1=PE12, EXP1_3=PB2, EXP1_5=PC14, EXP1_7=PG14, EXP1_9=<GND>,
+    EXP1_2=PE13, EXP1_4=PG8, EXP1_6=PC13, EXP1_8=PG13, EXP1_10=<5V>,
+    # EXP2 header
+    EXP2_1=PA6, EXP2_3=PB7, EXP2_5=PB6, EXP2_7=PG15,  EXP2_9=<GND>,
+    EXP2_2=PA4, EXP2_4=PA4, EXP2_6=PA7, EXP2_8=<RST>, EXP2_10=<5V>
+
+# See the sample-lcd.cfg file for definitions of common LCD displays.

config/generic-melzi.cfg

@@ -0,0 +1,83 @@
+# This file contains common pin mappings for Melzi v2.0 boards. To use
+# this config, the firmware should be compiled for the AVR
+# atmega1284p.
+
+# Note, a number of Melzi boards are shipped with a bootloader that
+# requires the following command to flash the board:
+#  avrdude -p atmega1284p -c arduino -b 57600 -P /dev/ttyUSB0 -U out/klipper.elf.hex
+# If the above command does not work and "make flash" does not work
+# then one may need to flash a bootloader to the board - see the
+# Klipper docs/Bootloaders.md file for more information.
+
+# See docs/Config_Reference.md for a description of parameters.
+
+[stepper_x]
+step_pin: PD7
+dir_pin: PC5
+enable_pin: !PD6
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^!PC2
+position_endstop: 0
+position_max: 200
+homing_speed: 50
+
+[stepper_y]
+step_pin: PC6
+dir_pin: PC7
+enable_pin: !PD6
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^!PC3
+position_endstop: 0
+position_max: 200
+homing_speed: 50
+
+[stepper_z]
+step_pin: PB3
+dir_pin: !PB2
+enable_pin: !PA5
+microsteps: 16
+rotation_distance: 8
+endstop_pin: ^!PC4
+position_endstop: 0.5
+position_max: 200
+
+[extruder]
+step_pin: PB1
+dir_pin: PB0
+enable_pin: !PD6
+microsteps: 16
+rotation_distance: 33.500
+nozzle_diameter: 0.400
+filament_diameter: 1.750
+heater_pin: PD5
+sensor_type: EPCOS 100K B57560G104F
+sensor_pin: PA7
+control: pid
+pid_Kp: 22.2
+pid_Ki: 1.08
+pid_Kd: 114
+min_temp: 0
+max_temp: 250
+
+[heater_bed]
+heater_pin: PD2
+sensor_type: EPCOS 100K B57560G104F
+sensor_pin: PA6
+control: watermark
+min_temp: 0
+max_temp: 130
+
+[fan]
+pin: PB4
+
+[mcu]
+serial: /dev/ttyUSB0
+
+[printer]
+kinematics: cartesian
+max_velocity: 300
+max_accel: 3000
+max_z_velocity: 5
+max_z_accel: 100

config/generic-mightyboard.cfg

@@ -0,0 +1,140 @@
+# This file contains common pin mappings for the Makerbot
+# Mightyboard. To use this config, the firmware should be compiled for
+# the Atmel atmega1280.
+
+# See docs/Config_Reference.md for a description of parameters.
+
+[stepper_x]
+step_pin: PF1
+dir_pin: !PF0
+enable_pin: !PF2
+microsteps: 16
+rotation_distance: 32
+endstop_pin: ^!PL1
+position_endstop: 152
+position_max: 153
+position_min: -120
+homing_speed: 50
+
+[stepper_y]
+step_pin: PF5
+dir_pin: !PF4
+enable_pin: !PF6
+microsteps: 16
+rotation_distance: 32
+endstop_pin: ^!PL3
+position_endstop: 77
+position_max: 78
+position_min: -84
+homing_speed: 50
+
+[stepper_z]
+step_pin: PK1
+dir_pin: !PK0
+enable_pin: !PK2
+microsteps: 16
+rotation_distance: 8
+endstop_pin: !PL6
+position_endstop: 0
+position_max: 230
+position_min: 0
+
+[extruder]
+step_pin: PA3
+dir_pin: !PA2
+enable_pin: !PA4
+microsteps: 16
+rotation_distance: 33.238
+nozzle_diameter: 0.400
+filament_diameter: 1.750
+heater_pin: PH3
+sensor_type: MAX6675
+sensor_pin: PE3
+spi_software_miso_pin: PE5
+spi_software_sclk_pin: PE2
+spi_software_mosi_pin: PA1 #dummy mosi pin
+control: pid
+pid_Kp: 26.414
+pid_Ki: 1.115
+pid_Kd: 156.5054
+min_temp: 0
+max_temp: 260
+
+[heater_fan extruder_fan]
+pin: PH4
+
+[fan]
+pin: PL5
+
+[heater_bed]
+heater_pin: PL4
+sensor_type: ATC Semitec 104GT-2
+sensor_pin: PK7
+control: pid
+pid_Kp: 70.037
+pid_Ki: 1.710
+pid_Kd: 717.000
+min_temp: 0
+max_temp: 130
+
+[mcu]
+serial: /dev/ttyAMA0
+restart_method: command
+
+[printer]
+kinematics: cartesian
+max_velocity: 300
+max_accel: 3000
+max_z_velocity: 5
+max_z_accel: 100
+
+[mcp4018 x_axis_pot]
+scl_pin: PJ5
+sda_pin: PF3
+wiper: 0.50
+scale: 0.773
+
+[mcp4018 y_axis_pot]
+scl_pin: PJ5
+sda_pin: PF7
+wiper: 0.50
+scale: 0.773
+
+[mcp4018 z_axis_pot]
+scl_pin: PJ5
+sda_pin: PK3
+wiper: 0.50
+scale: 0.773
+
+[mcp4018 a_axis_pot]
+scl_pin: PJ5
+sda_pin: PA5
+wiper: 0.50
+scale: 0.773
+
+[mcp4018 b_axis_pot]
+scl_pin: PJ5
+sda_pin: PJ6
+wiper: 0.50
+scale: 0.773
+
+[display]
+lcd_type: hd44780_spi
+spi_software_mosi_pin: PC3
+spi_software_sclk_pin: PC2
+#miso not used, dummy pin.
+spi_software_miso_pin: PJ1
+latch_pin: PC4
+
+click_pin: ^PJ0
+back_pin: ^PJ2
+up_pin: ^PJ4
+down_pin: ^PJ3
+
+[pca9533 led_strip]
+#set_led led=led_strip red=1 green=1 blue=1
+i2c_bus: twi
+i2c_address: 98
+initial_RED: 1
+initial_GREEN: 1
+initial_BLUE: 1

config/generic-mini-rambo.cfg

@@ -0,0 +1,113 @@
+# This file contains common pin mappings for Mini-RAMBo boards. To use
+# this config, the firmware should be compiled for the AVR atmega2560.
+
+# See docs/Config_Reference.md for a description of parameters.
+
+[stepper_x]
+step_pin: PC0
+dir_pin: PL1
+enable_pin: !PA7
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^PB6
+#endstop_pin: ^PC7
+position_endstop: 0
+position_max: 250
+
+[stepper_y]
+step_pin: PC1
+dir_pin: !PL0
+enable_pin: !PA6
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^PB5
+#endstop_pin: ^PA2
+position_endstop: 0
+position_max: 210
+
+[stepper_z]
+step_pin: PC2
+dir_pin: PL2
+enable_pin: !PA5
+microsteps: 16
+rotation_distance: 8
+endstop_pin: ^PB4
+#endstop_pin: ^PA1
+position_endstop: 0.5
+position_max: 200
+
+[extruder]
+step_pin: PC3
+dir_pin: PL6
+enable_pin: !PA4
+microsteps: 16
+rotation_distance: 33.500
+nozzle_diameter: 0.400
+filament_diameter: 1.750
+heater_pin: PE5
+sensor_type: EPCOS 100K B57560G104F
+sensor_pin: PF0
+control: pid
+pid_Kp: 22.2
+pid_Ki: 1.08
+pid_Kd: 114
+min_temp: 0
+max_temp: 250
+
+[heater_bed]
+heater_pin: PG5
+sensor_type: EPCOS 100K B57560G104F
+sensor_pin: PF2
+control: watermark
+min_temp: 0
+max_temp: 130
+
+[fan]
+pin: PH5
+
+#[heater_fan heatbreak_cooling_fan]
+#pin: PH3
+
+[mcu]
+serial: /dev/ttyACM0
+
+[printer]
+kinematics: cartesian
+max_velocity: 300
+max_accel: 3000
+max_z_velocity: 5
+max_z_accel: 100
+
+[output_pin stepper_xy_current]
+pin: PL3
+pwm: True
+scale: 2.0
+cycle_time: .000030
+hardware_pwm: True
+static_value: 1.3
+
+[output_pin stepper_z_current]
+pin: PL4
+pwm: True
+scale: 2.0
+cycle_time: .000030
+hardware_pwm: True
+static_value: 1.3
+
+[output_pin stepper_e_current]
+pin: PL5
+pwm: True
+scale: 2.0
+cycle_time: .000030
+hardware_pwm: True
+static_value: 1.25
+
+[static_digital_output stepper_config]
+pins:
+    PG1, PG0,
+    PK7, PG2,
+    PK6, PK5,
+    PK3, PK4
+
+[static_digital_output yellow_led]
+pins: !PB7

config/generic-minitronics1.cfg

@@ -0,0 +1,84 @@
+# This file contains common pin mappings for Minitronics v1.0
+# boards. To use this config, the firmware should be compiled for the
+# AVR atmega1280.
+
+# The "make flash" command does not work on the Minitronics v1.0
+# because the board actually has an atmega1281 chip. Use the following
+# command to flash the board:
+#  avrdude -carduino -patmega1281 -P/dev/ttyUSB0 -b57600 -D -Uout/klipper.elf.hex
+
+# See docs/Config_Reference.md for a description of parameters.
+
+[stepper_x]
+step_pin: PF2
+dir_pin: PF1
+enable_pin: !PF3
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^!PE3
+position_endstop: 0
+position_max: 200
+homing_speed: 50
+
+[stepper_y]
+step_pin: PA1
+dir_pin: PA2
+enable_pin: !PA0
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^!PE4
+position_endstop: 0
+position_max: 200
+homing_speed: 50
+
+[stepper_z]
+step_pin: PA4
+dir_pin: !PA5
+enable_pin: !PA3
+microsteps: 16
+rotation_distance: 8
+endstop_pin: ^!PB4
+position_endstop: 0.5
+position_max: 200
+
+[extruder]
+step_pin: PA7
+dir_pin: PA6
+enable_pin: !PG2
+microsteps: 16
+rotation_distance: 33.500
+nozzle_diameter: 0.400
+filament_diameter: 1.750
+heater_pin: PB5
+sensor_type: EPCOS 100K B57560G104F
+sensor_pin: PF7
+control: pid
+pid_Kp: 22.2
+pid_Ki: 1.08
+pid_Kd: 114
+min_temp: 0
+max_temp: 250
+
+[heater_bed]
+heater_pin: PE5
+sensor_type: EPCOS 100K B57560G104F
+sensor_pin: PF6
+control: watermark
+min_temp: 0
+max_temp: 130
+
+[fan]
+pin: PB7
+
+[mcu]
+serial: /dev/ttyUSB0
+
+[printer]
+kinematics: cartesian
+max_velocity: 300
+max_accel: 3000
+max_z_velocity: 5
+max_z_accel: 100
+
+[static_digital_output yellow_led]
+pins: PF0

config/generic-mks-monster8.cfg

@@ -0,0 +1,268 @@
+# This file contains common pin mappings for MKS Monster8
+# boards. To use this config, the firmware should be compiled for the
+# stm32f407. When running "make menuconfig", select the 48KiB
+# bootloader, and enable "USB for communication".
+
+# The "make flash" command does not work on the MKS Monster8. Instead,
+# after running "make", copy the generated "out/klipper.bin" file to a
+# file named "mks_monster8.bin" on an SD card or Udisk and then restart the
+# MKS Monster8 with that SD card or Udisk.
+
+# See docs/Config_Reference.md for a description of parameters.
+
+[stepper_x]
+step_pin: PC14
+dir_pin: PC13
+enable_pin: !PC15
+microsteps: 16
+rotation_distance: 40
+endstop_pin: !PA14  # PA13 for X-max; endstop have'!' is NO
+position_endstop: 0
+position_max: 200
+homing_speed: 50
+
+[stepper_y]
+step_pin: PE5
+dir_pin: !PE4
+enable_pin: !PC15
+microsteps: 16
+rotation_distance: 40
+endstop_pin: !PA15  # PC5 for Y-max; endstop have'!' is NO
+position_endstop: 0
+position_max: 200
+homing_speed: 50
+
+[stepper_z]
+step_pin: PE1
+dir_pin: PE0
+enable_pin: !PE2
+microsteps: 16
+rotation_distance: 8
+endstop_pin: !PB13  # PB12 for Z-max; endstop have'!' is NO
+position_endstop: 0
+position_max: 220
+
+[extruder]
+step_pin: PB5
+dir_pin: !PB4
+enable_pin: !PB6
+microsteps: 16
+rotation_distance: 33.500
+nozzle_diameter: 0.400
+filament_diameter: 1.750
+heater_pin: PB1
+sensor_type: EPCOS 100K B57560G104F
+sensor_pin: PC1
+control: pid
+pid_Kp: 22
+pid_Ki: 1.08
+pid_Kd: 114
+min_temp: 0
+max_temp: 260
+
+#[extruder1]
+#step_pin: PD6
+#dir_pin: !PD5
+#enable_pin: !PD7
+#heater_pin: PB0
+#sensor_pin: PC2
+
+#[extruder2]
+#step_pin: PD2
+#dir_pin: !PD1
+#enable_pin: !PD3
+#heater_pin: PA3
+#sensor_pin: PC3
+
+#[extruder3]
+#step_pin: PC7
+#dir_pin: PC6
+#enable_pin: !PC8
+
+#[extruder4]
+#step_pin: PD13
+#dir_pin: !PD12
+#enable_pin: !PD14
+
+[heater_bed]
+heater_pin: PB10
+sensor_type: NTC 100K MGB18-104F39050L32
+sensor_pin: PC0
+max_power: 1.0
+control: pid
+pid_kp: 71.039
+pid_ki: 2.223
+pid_kd: 567.421
+min_temp: 0
+max_temp: 200
+
+#fan for printed model FAN0
+[fan]
+pin: PA2
+
+#fan for hotend FAN1
+#[heater_fan my_nozzle_fan]
+[heater_fan fan1]
+pin: PA1
+shutdown_speed: 1
+
+#fan for control board FAN2
+#[heater_fan my_control_fan]
+[heater_fan fan2]
+pin: PA0
+shutdown_speed: 1
+
+[mcu]
+serial: /dev/serial/by-id/usb-Klipper_stm32f407xx_4D0045001850314335393520-if00
+
+[printer]
+kinematics: cartesian
+max_velocity: 10000
+max_accel: 20000
+max_z_velocity: 100
+max_z_accel: 1000
+
+#####################################################################
+# LED Control
+#####################################################################
+
+#[output_pin caselight ](Use PA9)
+##  Chamber Lighting - In 5V-RGB Position
+#pin: PA9
+#pwm: true
+#shutdown_value: 0
+#value:100
+#cycle_time: 0.01
+
+########################################
+# TMC UART configuration
+########################################
+
+#[tmc2208 stepper_x]
+#uart_pin: PE6
+#run_current: 0.8
+#hold_current: 0.5
+#stealthchop_threshold: 999999
+
+#[tmc2208 stepper_y]
+#uart_pin: PE3
+#run_current: 0.8
+#hold_current: 0.5
+#stealthchop_threshold: 999999
+
+#[tmc2208 stepper_z]
+#uart_pin: PB7
+#run_current: 0.8
+#hold_current: 0.5
+#stealthchop_threshold: 999999
+
+#[tmc2208 extruder]
+#uart_pin: PB3
+#run_current: 0.8
+#hold_current: 0.5
+#sense_resistor: 0.110
+#stealthchop_threshold: 999999
+
+#[tmc2208 extruder1]
+#uart_pin: PD4
+#run_current: 0.8
+#hold_current: 0.5
+#stealthchop_threshold: 999999
+
+#[tmc2208 extruder2]
+#uart_pin: PD0
+#run_current: 0.8
+#hold_current: 0.5
+#stealthchop_threshold: 999999
+
+#[tmc2208 extruder3]
+#uart_pin: PD15
+#run_current: 0.8
+#hold_current: 0.5
+#stealthchop_threshold: 999999
+
+#[tmc2208 extruder4]
+#uart_pin: PD11
+#run_current: 0.8
+#hold_current: 0.5
+#stealthchop_threshold: 999999
+
+########################################
+# TMC SPI configuration
+########################################
+
+#[tmc2130 stepper_x]
+#spi_bus: spi4
+#cs_pin: PE6
+#diag1_pin: PA14
+#run_current: 0.800
+#hold_current: 0.500
+#stealthchop_threshold: 999999
+
+#[tmc2130 stepper_y]
+#spi_bus: spi4
+#cs_pin: PE3
+#diag1_pin: PA15
+#run_current: 0.800
+#hold_current: 0.500
+#stealthchop_threshold: 999999
+
+#[tmc2130 stepper_z]
+#spi_bus: spi4
+#cs_pin: PB7
+#diag1_pin: PB13
+#run_current: 0.800
+#hold_current: 0.500
+#stealthchop_threshold: 999999
+
+#[tmc2130 extruder]
+#spi_bus: spi4
+#cs_pin: PB3
+#diag1_pin: PA13
+#run_current: 0.800
+#hold_current: 0.500
+#stealthchop_threshold: 999999
+
+#[tmc2130 extruder1]
+#spi_bus: spi4
+#cs_pin: PD4
+#diag1_pin: PC5
+#run_current: 0.800
+#hold_current: 0.500
+#stealthchop_threshold: 999999
+
+#[tmc2130 extruder2]
+#spi_bus: spi4
+#cs_pin: PD0
+#diag1_pin: PB12
+#run_current: 0.800
+#hold_current: 0.500
+#stealthchop_threshold: 999999
+
+#[tmc2130 extruder3]
+#spi_bus: spi4
+#cs_pin: PD15
+#run_current: 0.800
+#hold_current: 0.500
+#stealthchop_threshold: 999999
+
+#[tmc2130 extruder4]
+#spi_bus: spi4
+#cs_pin: PD11
+#run_current: 0.800
+#hold_current: 0.500
+#stealthchop_threshold: 999999
+
+########################################
+# EXP1 / EXP2 (display) pins
+########################################
+
+[board_pins]
+aliases:
+    # EXP1 header
+    EXP1_1=PB2,  EXP1_3=PE11, EXP1_5=PD9, EXP1_7=PE15, EXP1_9=<GND>,
+    EXP1_2=PE10, EXP1_4=PD10, EXP1_6=PD8, EXP1_8=PE7,  EXP1_10=<5V>,
+    # EXP2 header
+    EXP2_1=PA6, EXP2_3=PE9, EXP2_5=PE8, EXP2_7=PB11,  EXP2_9=<GND>,
+    EXP2_2=PA5, EXP2_4=PA4, EXP2_6=PA7, EXP2_8=<RST>, EXP2_10=<3.3v>
+    # Pins EXP2_1, EXP2_6, EXP2_2 are also MISO, MOSI, SCK of bus "ssp1"

config/generic-mks-robin-e3.cfg

@@ -0,0 +1,145 @@
+# This file contains common pin mappings for MKS Robin E3 boards. To
+# use this config, the firmware should be compiled for the STM32F103.
+# When running "make menuconfig", enable "extra low-level
+# configuration setup", select the 20KiB bootloader, and serial (on
+# USART1 PA10/PA9) communication.
+
+# Note that the "make flash" command does not work with MKS Robin
+# boards. After running "make", run the following command:
+#   ./scripts/update_mks_robin.py out/klipper.bin out/Robin_e3.bin
+# Copy the file out/Robin_e3.bin to an SD card and then restart the
+# printer with that SD card.
+
+# MKS Robin E3 has onboard TMC2209. This config can also be used for
+# MKS Robin E3D if equipped with TMC2209 stepper drivers.
+
+# Please note pin name change for stepper Z for v1.1 of the boards.
+
+# See docs/Config_Reference.md for a description of parameters.
+
+[stepper_x]
+step_pin: PC0
+dir_pin: PB2
+enable_pin: !PC13
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^PA12
+position_endstop: 0
+position_max: 165
+homing_speed: 50
+
+[stepper_y]
+step_pin: PC2
+dir_pin: PB9
+enable_pin: !PB12
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^PA11
+position_endstop: 0
+position_max: 165
+homing_speed: 50
+
+[stepper_z]
+step_pin: PB7 # PC14 if using board v1.1
+dir_pin: !PB6 # !PC15 if using board v1.1
+enable_pin: !PB8
+microsteps: 16
+rotation_distance: 8
+endstop_pin: ^PC6
+position_endstop: 0
+position_max: 200
+
+[extruder]
+step_pin: PB4
+dir_pin: PB3
+enable_pin: !PB5
+microsteps: 16
+rotation_distance: 33.500
+nozzle_diameter: 0.400
+filament_diameter: 1.750
+heater_pin: PC9
+sensor_type: EPCOS 100K B57560G104F
+sensor_pin: PA0
+control: pid
+pid_Kp: 21.527
+pid_Ki: 1.063
+pid_Kd: 108.982
+min_temp: 0
+max_temp: 250
+
+[tmc2209 stepper_x]
+uart_pin: PC7
+run_current: 0.800
+stealthchop_threshold: 999999
+
+[tmc2209 stepper_y]
+uart_pin: PD2
+run_current: 0.800
+stealthchop_threshold: 999999
+
+[tmc2209 stepper_z]
+uart_pin: PC12
+run_current: 0.650
+stealthchop_threshold: 999999
+
+[tmc2209 extruder]
+uart_pin: PC11
+run_current: 0.800
+stealthchop_threshold: 999999
+
+[fan]
+pin: PA8
+
+#[heater_bed]
+#heater_pin: PC8
+#sensor_pin: PA1
+#...
+
+#[bltouch]
+#sensor_pin: ^PC6
+#control_pin: PA3
+#...
+
+#[filament_switch_sensor my_sensor]
+#switch_pin: PB10
+#...
+
+[mcu]
+serial: /dev/serial/by-id/usb-1a86_USB2.0-Serial-if00-port0
+restart_method: command
+
+[printer]
+kinematics: cartesian
+max_velocity: 300
+max_accel: 1500
+max_z_velocity: 5
+max_z_accel: 100
+
+# EXP1 / EXP2 (display) pins
+[board_pins]
+aliases:
+    # EXP1 header
+    EXP1_1=PC3, EXP1_3=PA4, EXP1_5=PA6, EXP1_7=PC4, EXP1_9=<GND>,
+    EXP1_2=PC1, EXP1_4=PA5, EXP1_6=PA7, EXP1_8=PC5, EXP1_10=<5V>,
+    # EXP2 header
+    EXP2_1=PB14, EXP2_3=PB11, EXP2_5=PB0,  EXP2_7=PC10,  EXP2_9=<GND>,
+    EXP2_2=PB13, EXP2_4=PA15, EXP2_6=PB15, EXP2_8=<RST>, EXP2_10=<NC>,
+    # CR_EXP3 header - additional header dedicated to Creality Ender 3/5 stock screens
+    CR_EXP3_10=<5V>, CR_EXP3_8=PA4, CR_EXP3_6=PA6, CR_EXP3_4=<RST>, CR_EXP3_2=PC3,
+    CR_EXP3_9=<GND>, CR_EXP3_7=PA5, CR_EXP3_5=PB0, CR_EXP3_3=PB11,  CR_EXP3_1=PC1
+
+# If you're using this board to replace stock Creality board, connect display to EXP3
+# and use this display config
+#[display]
+#lcd_type: st7920
+#sid_pin: CR_EXP3_8
+#cs_pin: CR_EXP3_7
+#sclk_pin: CR_EXP3_6
+#encoder_pins: ^CR_EXP3_5, ^CR_EXP3_3
+#click_pin: ^!CR_EXP3_2
+#
+#[output_pin beeper]
+## pin: EXP1_9
+#pin: CR_EXP3_1
+
+# See the sample-lcd.cfg file for definitions of common LCD displays.

config/generic-mks-robin-nano-v1.cfg

@@ -0,0 +1,96 @@
+# This file contains common pin mappings for MKS Robin Nano (v1.2.004)
+# boards. To use this config, the firmware should be compiled for the
+# STM32F103. When running "make menuconfig", enable "extra low-level
+# configuration setup", select the 28KiB bootloader, and serial (on
+# USART3 PB11/PB10) communication.
+
+# Note that the "make flash" command does not work with MKS Robin
+# boards. After running "make", run the following command:
+#   ./scripts/update_mks_robin.py out/klipper.bin out/Robin_nano.bin
+# Copy the file out/Robin_nano.bin to an SD card and then restart the
+# printer with that SD card.
+
+# See docs/Config_Reference.md for a description of parameters.
+
+[stepper_x]
+step_pin: PE3
+dir_pin: !PE2
+enable_pin: !PE4
+microsteps: 16
+rotation_distance: 40
+endstop_pin: !PA15
+position_endstop: 0
+position_max: 200
+homing_speed: 50
+
+[stepper_y]
+step_pin: PE0
+dir_pin: !PB9
+enable_pin: !PE1
+microsteps: 16
+rotation_distance: 40
+endstop_pin: !PA12
+position_endstop: 230
+position_max: 230
+homing_speed: 50
+
+[stepper_z]
+step_pin: PB5
+dir_pin: PB4
+enable_pin: !PB8
+microsteps: 16
+rotation_distance: 8
+endstop_pin: !PA11
+position_endstop: 0.5
+position_max: 200
+
+[extruder]
+step_pin: PD6
+dir_pin: !PD3
+enable_pin: !PB3
+microsteps: 16
+rotation_distance: 33.500
+nozzle_diameter: 0.400
+filament_diameter: 1.750
+heater_pin: PC3
+sensor_type: ATC Semitec 104GT-2
+sensor_pin: PC1
+control: pid
+pid_Kp: 14.669
+pid_Ki: 0.572
+pid_Kd: 94.068
+min_temp: 0
+max_temp: 250
+
+#[extruder1]
+#step_pin: PA6
+#dir_pin: !PA1
+#enable_pin: !PA3
+#heater_pin: PB0
+#sensor_pin: PC2
+#...
+
+[heater_bed]
+heater_pin: PA0
+sensor_type: EPCOS 100K B57560G104F
+sensor_pin: PC0
+control: pid
+pid_Kp: 325.10
+pid_Ki: 63.35
+pid_Kd: 417.10
+min_temp: 0
+max_temp: 130
+
+[fan]
+pin: PB1
+
+[mcu]
+serial: /dev/ttyUSB0
+restart_method: command
+
+[printer]
+kinematics: corexy
+max_velocity: 250
+max_accel: 4500
+max_z_velocity: 25
+max_z_accel: 100

config/generic-mks-robin-nano-v2.cfg

@@ -0,0 +1,112 @@
+# This file contains common pin mappings for MKS Robin Nano V2
+# boards. To use this config, the firmware should be compiled for the
+# STM32F103. When running "make menuconfig", enable "extra low-level
+# configuration setup", select the 28KiB bootloader, and serial (on
+# USART3 PB11/PB10) communication.
+
+# Note that the "make flash" command does not work with MKS Robin
+# boards. After running "make", run the following command:
+#   ./scripts/update_mks_robin.py out/klipper.bin out/Robin_nano35.bin
+# Copy the file out/Robin_nano35.bin to an SD card and then restart the
+# printer with that SD card.
+
+# See docs/Config_Reference.md for a description of parameters.
+
+[stepper_x]
+step_pin: PE3
+dir_pin: !PE2
+enable_pin: !PE4
+microsteps: 16
+rotation_distance: 40
+endstop_pin: PA15
+position_endstop: 0
+position_max: 300
+homing_speed: 50
+
+[stepper_y]
+step_pin: PE0
+dir_pin: !PB9
+enable_pin: !PE1
+microsteps: 16
+rotation_distance: 40
+endstop_pin: !PA12
+position_endstop: 0
+position_max: 300
+homing_speed: 50
+
+[stepper_z]
+step_pin: PB5
+dir_pin: PB4
+enable_pin: !PB8
+microsteps: 16
+rotation_distance: 8
+endstop_pin: !PA11
+position_endstop: 0.5
+position_max: 200
+
+[extruder]
+step_pin: PD6
+dir_pin: !PD3
+enable_pin: !PB3
+microsteps: 16
+rotation_distance: 33.500
+nozzle_diameter: 0.400
+filament_diameter: 1.750
+heater_pin: PC3
+sensor_type: ATC Semitec 104GT-2
+sensor_pin: PC1
+control: pid
+pid_Kp: 14.669
+pid_Ki: 0.572
+pid_Kd: 94.068
+min_temp: 0
+max_temp: 250
+
+#[extruder1]
+#step_pin: PD15
+#dir_pin: !PA1
+#enable_pin: !PA3
+#heater_pin: PB0
+#sensor_pin: PC2
+#...
+
+[heater_bed]
+heater_pin: PA0
+sensor_type: EPCOS 100K B57560G104F
+sensor_pin: PC0
+control: pid
+pid_Kp: 325.10
+pid_Ki: 63.35
+pid_Kd: 417.10
+min_temp: 0
+max_temp: 130
+
+[fan]
+pin: PB1
+
+[mcu]
+serial: /dev/serial/by-id/usb-1a86_USB2.0-Serial-if00-port0
+restart_method: command
+
+[printer]
+kinematics: cartesian
+max_velocity: 250
+max_accel: 4500
+max_z_velocity: 25
+max_z_accel: 100
+
+########################################
+# EXP1 / EXP2 (display) pins
+########################################
+
+[board_pins]
+aliases:
+    # EXP1 header
+    EXP1_2=PE13, EXP1_4=PC6, EXP1_6=PE15, EXP1_8=PD10, EXP1_10=<5V>,
+    EXP1_1=PC5, EXP1_3=PD13, EXP1_5=PE14, EXP1_7=PD11,  EXP1_9=<GND>,
+    # EXP2 header
+    EXP2_2=PA5, EXP2_4=PE0, EXP2_6=PE10,  EXP2_8=<RST>, EXP2_10=<3.3v>,
+    EXP2_1=PA6, EXP2_3=PE8, EXP2_5=PE11, EXP2_7=PE12, EXP2_9=<GND>
+    # Pins EXP2_1, EXP2_6, EXP2_2 are also MISO, MOSI, SCK of bus "ssp1"
+
+# See the sample-lcd.cfg file for definitions of common LCD displays.

config/generic-mks-robin-nano-v3.cfg

@@ -0,0 +1,110 @@
+# This file contains common pin mappings for MKS Robin Nano V3
+# boards. To use this config, the firmware should be compiled for the
+# stm32f407. When running "make menuconfig", select the 48KiB
+# bootloader, and enable "USB for communication".
+
+# The "make flash" command does not work on the MKS Robin. Instead,
+# after running "make", copy the generated "out/klipper.bin" file to a
+# file named "Robin_nano_v3.bin" on an SD card and then restart the
+# MKS Robin with that SD card.
+
+# See docs/Config_Reference.md for a description of parameters.
+
+[stepper_x]
+step_pin: PE3
+dir_pin: !PE2
+enable_pin: !PE4
+microsteps: 16
+rotation_distance: 40
+endstop_pin: PA15
+position_endstop: 0
+position_max: 300
+homing_speed: 50
+
+[stepper_y]
+step_pin: PE0
+dir_pin: !PB9
+enable_pin: !PE1
+microsteps: 16
+rotation_distance: 40
+endstop_pin: !PD2
+position_endstop: 0
+position_max: 300
+homing_speed: 50
+
+[stepper_z]
+step_pin: PB5
+dir_pin: PB4
+enable_pin: !PB8
+microsteps: 16
+rotation_distance: 8
+endstop_pin: !PC8
+position_endstop: 0.5
+position_max: 200
+
+[extruder]
+step_pin: PD6
+dir_pin: !PD3
+enable_pin: !PB3
+microsteps: 16
+rotation_distance: 33.500
+nozzle_diameter: 0.400
+filament_diameter: 1.750
+heater_pin: PE5
+sensor_type: ATC Semitec 104GT-2
+sensor_pin: PC1
+control: pid
+pid_Kp: 14.669
+pid_Ki: 0.572
+pid_Kd: 94.068
+min_temp: 0
+max_temp: 250
+
+#[extruder1]
+#step_pin: PD15
+#dir_pin: !PA1
+#enable_pin: !PA3
+#heater_pin: PB0
+#sensor_pin: PA2
+#...
+
+[heater_bed]
+heater_pin: PA0
+sensor_type: EPCOS 100K B57560G104F
+sensor_pin: PC0
+control: pid
+pid_Kp: 325.10
+pid_Ki: 63.35
+pid_Kd: 417.10
+min_temp: 0
+max_temp: 130
+
+[fan]
+pin: PC14   # fan1
+#pin: PB1 # fan2
+
+[mcu]
+serial: /dev/serial/by-id/usb-Klipper_stm32f407xx_000000000000000000000000-if00
+
+[printer]
+kinematics: cartesian
+max_velocity: 250
+max_accel: 4500
+max_z_velocity: 25
+max_z_accel: 100
+
+########################################
+# EXP1 / EXP2 (display) pins
+########################################
+
+[board_pins]
+aliases:
+    # EXP1 header
+    EXP1_1=PC5,  EXP1_3=PD13, EXP1_5=PE14, EXP1_7=PD11, EXP1_9=<GND>,
+    EXP1_2=PE13, EXP1_4=PC6,  EXP1_6=PE15, EXP1_8=PD10, EXP1_10=<5V>,
+    # EXP2 header
+    EXP2_1=PA6, EXP2_3=PE8, EXP2_5=PE11, EXP2_7=PE12,  EXP2_9=<GND>,
+    EXP2_2=PA5, EXP2_4=PE10, EXP2_6=PA7, EXP2_8=<RST>, EXP2_10=<3.3v>
+    # Pins EXP2_1, EXP2_6, EXP2_2 are also MISO, MOSI, SCK of bus "ssp1"
+
+# See the sample-lcd.cfg file for definitions of common LCD displays.

config/generic-mks-rumba32-v1.0.cfg

@@ -0,0 +1,140 @@
+# This file contains common pin mappings for MKS RUMBA32 boards.  To use
+# this config, the firmware should be compiled for the STMicroelectronics STM32,
+# Processor model STM32F446, Clock Reference 12 MHz crystal.
+
+# See docs/Config_Reference.md for a description of parameters.
+
+[stepper_x]
+step_pin: PA0
+dir_pin: PC15
+enable_pin: !PC11
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^PB12
+position_endstop: 0
+position_max: 200
+homing_speed: 50
+
+[stepper_y]
+step_pin: PE5
+dir_pin: !PE6
+enable_pin: !PE3
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^PB15
+position_endstop: 0
+position_max: 200
+homing_speed: 50
+
+[stepper_z]
+step_pin: PE1
+dir_pin: PE2
+enable_pin: !PB7
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^PD9
+position_endstop: 0.5
+position_max: 200
+
+[extruder]
+step_pin: PB5
+dir_pin: PB6
+enable_pin: !PC12
+microsteps: 16
+rotation_distance: 33.500
+nozzle_diameter: 0.400
+filament_diameter: 1.750
+heater_pin: PC6
+sensor_type: EPCOS 100K B57560G104F
+sensor_pin: PC4
+control: pid
+pid_Kp: 22.2
+pid_Ki: 1.08
+pid_Kd: 114
+min_temp: 0
+max_temp: 250
+
+#[extruder1]
+#step_pin: PD6
+#dir_pin: PD7
+#enable_pin: !PD4
+#heater_pin: PC7
+#sensor_pin: PC3
+#...
+
+#[extruder2]
+#step_pin: PD2
+#dir_pin: PD3
+#enable_pin: !PD0
+#heater_pin: PC8
+#sensor_pin: PC2
+#...
+
+[heater_bed]
+heater_pin: PA1
+sensor_type: Generic 3950
+sensor_pin: PC0
+control: watermark
+min_temp: 0
+max_temp: 130
+
+[fan]
+pin: PC9
+
+#[heater_fan fan1]
+#pin: PA8
+
+[mcu]
+serial: /dev/ttyACM0
+
+[printer]
+kinematics: cartesian
+max_velocity: 300
+max_accel: 3000
+max_z_velocity: 5
+max_z_accel: 100
+
+
+########################################
+# EXP1 / EXP2 (display) pins
+########################################
+
+[board_pins]
+aliases:
+    # EXP1 header
+    EXP1_1=PE8, EXP1_3=PE9, EXP1_5=PE12, EXP1_7=PE14, EXP1_9=<GND>,
+    EXP1_2=PE7, EXP1_4=PE10, EXP1_6=PE13, EXP1_8=PE15, EXP1_10=<5V>,
+    # EXP2 header
+    EXP2_1=PA6, EXP2_3=PB2, EXP2_5=PB1, EXP2_7=PB0,  EXP2_9=<GND>,
+    EXP2_2=PA5, EXP2_4=PA2, EXP2_6=PA7, EXP2_8=<RST>, EXP2_10=PC5
+
+# See the sample-lcd.cfg file for definitions of common LCD displays.
+
+
+########################################
+# TMC2209 configuration
+########################################
+
+#[tmc2209 stepper_x]
+#uart_pin: PC14
+##tx_pin: PA3
+#run_current: 0.800
+#diag_pin:
+
+#[tmc2209 stepper_y]
+#uart_pin: PE4
+##tx_pin: PA4
+#run_current: 0.800
+#diag_pin:
+
+#[tmc2209 stepper_z]
+#uart_pin: PE0
+##tx_pin: PD13
+#run_current: 0.800
+#diag_pin:
+
+#[tmc2209 extruder]
+#uart_pin: PC13
+##tx_pin: PD14
+#run_current: 0.600
+#diag_pin:

config/generic-mks-sgenl.cfg

@@ -0,0 +1,180 @@
+# This file contains common pin mappings for the MKS SGEN_L board. To
+# use this config, the firmware should be compiled for the LPC1768.
+
+# See docs/Config_Reference.md for a description of parameters.
+
+[stepper_x]
+step_pin: P2.2
+dir_pin: !P2.3
+enable_pin: !P2.1
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^P1.29  # ^P1.28 for X-max
+position_endstop: 0
+position_max: 320
+homing_speed: 50
+
+[stepper_y]
+step_pin: P0.19
+dir_pin: !P0.20
+enable_pin: !P2.8
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^P1.27  # ^P1.26 for Y-max
+position_endstop: 0
+position_max: 300
+homing_speed: 50
+
+[stepper_z]
+step_pin: P0.22
+dir_pin: P2.11
+enable_pin: !P0.21
+microsteps: 16
+rotation_distance: 8
+endstop_pin: ^P1.25  # ^P1.24 for Z-max
+position_endstop: 0.5
+position_max: 400
+
+[extruder]
+step_pin: P2.13
+dir_pin: !P0.11
+enable_pin: !P2.12
+microsteps: 16
+rotation_distance: 33.500
+nozzle_diameter: 0.400
+filament_diameter: 1.750
+heater_pin: P2.7
+sensor_type: EPCOS 100K B57560G104F
+sensor_pin: P0.23
+control: pid
+pid_Kp: 22.2
+pid_Ki: 1.08
+pid_Kd: 114
+min_temp: 0
+max_temp: 260
+
+#[extruder1]
+#step_pin: P0.1
+#dir_pin: P0.0
+#enable_pin: !P0.10
+#heater_pin: P2.6
+#sensor_pin: P0.25
+#...
+
+[heater_bed]
+heater_pin: P2.5
+sensor_type: ATC Semitec 104GT-2
+sensor_pin: P0.24
+control: watermark
+min_temp: 0
+max_temp: 130
+
+[fan]
+pin: P2.4
+
+[mcu]
+serial: /dev/serial/by-id/usb-Klipper_Klipper_firmware_12345-if00
+
+[printer]
+kinematics: cartesian
+max_velocity: 200
+max_accel: 2000
+max_z_velocity: 25
+max_z_accel: 100
+
+
+########################################
+# TMC2208 configuration
+########################################
+
+#[tmc2208 stepper_x]
+#uart_pin: P1.1
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2208 stepper_y]
+#uart_pin: P1.8
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2208 stepper_z]
+#uart_pin: P1.10
+#run_current: 0.650
+#stealthchop_threshold: 999999
+
+#[tmc2208 extruder]
+#uart_pin: P1.15
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2208 extruder1]
+#uart_pin: P1.17
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+
+########################################
+# TMC2130 configuration
+########################################
+
+#[tmc2130 stepper_x]
+#cs_pin: P1.1
+#spi_software_miso_pin: P0.5
+#spi_software_mosi_pin: P4.28
+#spi_software_sclk_pin: P0.4
+##diag1_pin: ^!P1.29
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2130 stepper_y]
+#cs_pin: P1.8
+#spi_software_miso_pin: P0.5
+#spi_software_mosi_pin: P4.28
+#spi_software_sclk_pin: P0.4
+##diag1_pin: ^!P1.27
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2130 stepper_z]
+#cs_pin: P1.10
+#spi_software_miso_pin: P0.5
+#spi_software_mosi_pin: P4.28
+#spi_software_sclk_pin: P0.4
+##diag1_pin: ^!P1.25
+#run_current: 0.650
+#stealthchop_threshold: 999999
+
+#[tmc2130 extruder]
+#cs_pin: P1.15
+#spi_software_miso_pin: P0.5
+#spi_software_mosi_pin: P4.28
+#spi_software_sclk_pin: P0.4
+##diag1_pin: ^!P1.28
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+#[tmc2130 extruder1]
+#cs_pin: P1.17
+#spi_software_miso_pin: P0.5
+#spi_software_mosi_pin: P4.28
+#spi_software_sclk_pin: P0.4
+##diag1_pin: ^!P1.26
+#run_current: 0.800
+#stealthchop_threshold: 999999
+
+
+########################################
+# EXP1 / EXP2 (display) pins
+########################################
+
+[board_pins]
+aliases:
+    # EXP1 header
+    EXP1_1=P1.31, EXP1_3=P0.18, EXP1_5=P0.15, EXP1_7=P1.0,  EXP1_9=<GND>,
+    EXP1_2=P1.30, EXP1_4=P0.16, EXP1_6=P0.17, EXP1_8=P1.22, EXP1_10=<5V>,
+    # EXP2 header
+    EXP2_1=P0.8, EXP2_3=P3.25, EXP2_5=P3.26, EXP2_7=P0.27, EXP2_9=<GND>,
+    EXP2_2=P0.7, EXP2_4=P0.28, EXP2_6=P0.9,  EXP2_8=<RST>, EXP2_10=<NC>
+    # Pins EXP2_1, EXP2_6, EXP2_2 are also MISO, MOSI, SCK of bus "ssp1"
+
+# See the sample-lcd.cfg file for definitions of common LCD displays.

config/generic-printrboard-g2.cfg

@@ -0,0 +1,121 @@
+# This file contains common pin mappings for Printrboard G2 boards.
+# To use this config, the firmware should be compiled for the SAM3x8c.
+
+# See docs/Config_Reference.md for a description of parameters.
+
+[stepper_x]
+step_pin: PB15
+dir_pin: !PA16
+enable_pin: !PB16
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^PA11
+position_endstop: 0
+position_max: 200
+homing_speed: 50
+
+[stepper_y]
+step_pin: PA29
+dir_pin: !PB1
+enable_pin: !PB0
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^PB26
+position_endstop: 150
+position_max: 150
+homing_speed: 50
+
+[stepper_z]
+step_pin: PA21
+dir_pin: PA26
+enable_pin: !PA25
+microsteps: 16
+rotation_distance: 8
+endstop_pin: ^!PA10
+position_endstop: 0
+position_min: -2
+position_max: 200
+
+[output_pin motor_x_pwm]
+pin: PB17
+pwm: True
+hardware_pwm: True
+scale: 2.25
+cycle_time: .000004
+value: 0.8
+
+[output_pin motor_y_pwm]
+pin: PB19
+pwm: True
+hardware_pwm: True
+scale: 2.25
+cycle_time: .000004
+value: 0.8
+
+[output_pin motor_z_pwm]
+pin: PB18
+pwm: True
+hardware_pwm: True
+scale: 2.25
+cycle_time: .000004
+value: 0.8
+
+[output_pin motor_e_pwm]
+pin: PA2
+pwm: True
+hardware_pwm: True
+scale: 2.25
+cycle_time: .000004
+value: 0.5
+
+[output_pin heater_enable]
+pin: PA7
+pwm: True
+cycle_time: 0.050
+value: 0.1
+
+[thermistor G2]
+temperature1: 20
+resistance1: 140000
+temperature2: 195
+resistance2: 593
+temperature3: 255
+resistance3: 189
+
+[extruder]
+step_pin: PB14
+dir_pin: PB23
+enable_pin: !PB22
+microsteps: 16
+rotation_distance: 25.600
+nozzle_diameter: 0.300
+filament_diameter: 1.750
+heater_pin: PA5
+sensor_pin: PA23
+sensor_type: G2
+inline_resistor: 4700
+control: pid
+pid_kp: 29.852
+pid_ki: 2.843
+pid_kd: 78
+min_temp: 0
+max_temp: 290
+
+[fan]
+pin: PB27
+
+[heater_fan heatbreak_cooling_fan]
+pin: PA6
+
+[mcu]
+serial: /dev/serial/by-id/usb-Klipper_Klipper_firmware_12345-if00
+
+[printer]
+kinematics: cartesian
+max_velocity: 400
+max_accel: 2500
+max_z_velocity: 15
+max_z_accel: 300
+
+[static_digital_output step_config]
+pins: PA19, PB20, PA27, PB10

config/generic-printrboard.cfg

@@ -0,0 +1,93 @@
+# This file contains common pin mappings for Printrboard boards (rev B
+# through D). To use this config the firmware should be compiled for
+# the AVR at90usb1286.
+
+# Note that the "make flash" command will not work for Printrboard!
+# To flash:
+# - Connect the "BOOT" jumper.
+# - Press the reset button (on board) to enter into DFU mode.
+# - Connect via USB and run:
+# avrdude -c flip1 -p usb1286 -U flash:w:out/klipper.elf.hex
+
+# See docs/Config_Reference.md for a description of parameters.
+
+[stepper_x]
+step_pin: PA0
+dir_pin: !PA1
+enable_pin: !PE7
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^PE3
+position_endstop: 0
+position_max: 200
+homing_speed: 50
+
+[stepper_y]
+step_pin: PA2
+dir_pin: PA3
+enable_pin: !PE6
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^PB0
+# Printrboard RevF uses a different Y endstop pin.
+#endstop_pin: ^PB4
+position_endstop: 0
+position_max: 200
+homing_speed: 50
+
+[stepper_z]
+step_pin: PA4
+dir_pin: !PA5
+enable_pin: !PC7
+microsteps: 16
+rotation_distance: 8
+endstop_pin: ^PE4
+position_endstop: 0.5
+position_max: 200
+
+[extruder]
+step_pin: PA6
+dir_pin: PA7
+enable_pin: !PC3
+microsteps: 16
+rotation_distance: 33.500
+nozzle_diameter: 0.400
+filament_diameter: 1.750
+heater_pin: PC5
+sensor_type: EPCOS 100K B57560G104F
+sensor_pin: PF1
+control: pid
+pid_Kp: 22.2
+pid_Ki: 1.08
+pid_Kd: 114
+min_temp: 0
+max_temp: 250
+
+[heater_bed]
+heater_pin: PC4
+sensor_type: EPCOS 100K B57560G104F
+sensor_pin: PF0
+control: watermark
+min_temp: 0
+max_temp: 130
+
+[fan]
+pin: PC6
+
+[mcu]
+serial: /dev/serial/by-id/usb-Klipper_Klipper_firmware_12345-if00
+
+[printer]
+kinematics: cartesian
+max_velocity: 300
+max_accel: 3000
+max_z_velocity: 5
+max_z_accel: 100
+
+# Use the following on a Printrboard RevF to control stepper current.
+#[mcp4728 stepper_current_dac]
+#scale: 2.327
+#channel_a: 1.2 # Extruder
+#channel_b: 1.2 # stepper_z
+#channel_c: 1.0 # stepper_y
+#channel_d: 1.0 # stepper_x

config/generic-prusa-buddy.cfg

@@ -0,0 +1,159 @@
+# This file contains common configurations and pin mappings for the Prusa Buddy
+# board. The LCD is not currently supported by Klipper, so the touchscreen will
+# permanently display the bootloader screen after the Klipper firmware is flashed;
+# use Fluidd, Mainsail, or OctoPrint etc. to control the printer.
+
+# To use this config, the firmware should be compiled for the STM32F407. When
+# running "make menuconfig", enable "extra low-level configuration setup",
+# select the "128KiB + 512 byte offset" bootloader, and USB communication.
+# Connect the printer to your Raspberry Pi using the printer's micro-USB port.
+# If you prefer to remove Prusa's stock bootloader entirely, select the
+# "No bootloader" option.
+
+# When flashing for the first time, you will need to break the "appendix"
+# on the Buddy board, then put the device into DFU mode by moving the jumper
+# on the 3-pin header (older boards) or shorting the 2-pin header (newer boards)
+# and resetting, and finally use "make flash" to install Klipper. Once Klipper is
+# installed, you no longer need the jumper - just use "make flash" which will
+# automatically put the device into DFU mode.
+
+# Note that if you were previously running Prusa firmware, you must fully
+# power cycle the board after flashing. Otherwise, Klipper will be unable to
+# communicate with the TMC2209s due to the abrupt change in the baud rate,
+# and will show this error: "Unable to read tmc uart register IFCNT".
+
+# See docs/Config_Reference.md for a description of parameters.
+
+[stepper_x]
+step_pin: PD1
+dir_pin: PD0
+enable_pin: !PD3
+microsteps: 16
+rotation_distance: 32
+endstop_pin: tmc2209_stepper_x:virtual_endstop
+position_endstop: 200
+position_min: 0
+position_max: 200
+homing_speed: 50
+homing_retract_dist: 0
+
+[stepper_y]
+step_pin: PD13
+dir_pin: PD12
+enable_pin: !PD14
+microsteps: 16
+rotation_distance: 32
+endstop_pin: tmc2209_stepper_y:virtual_endstop
+position_endstop: 0
+position_min: 0
+position_max: 200
+homing_speed: 50
+homing_retract_dist: 0
+
+[stepper_z]
+step_pin: PD4
+dir_pin: !PD15
+enable_pin: !PD2
+microsteps: 16
+rotation_distance: 4
+endstop_pin: probe:z_virtual_endstop
+position_min: 0
+position_max: 200
+
+[extruder]
+step_pin: PD9
+dir_pin: !PD8
+enable_pin: !PD10
+microsteps: 16
+rotation_distance: 33.500
+nozzle_diameter: 0.400
+filament_diameter: 1.750
+heater_pin: PB1
+sensor_type: ATC Semitec 104GT-2
+sensor_pin: PC0
+control: pid
+pid_Kp: 7
+pid_Ki: 0.5
+pid_Kd: 45
+min_temp: 10
+max_temp: 305
+
+[tmc2209 stepper_x]
+uart_pin: PD5
+uart_address: 1
+diag_pin: ^PE2
+driver_SGTHRS: 130
+run_current: 0.35
+sense_resistor: 0.22
+stealthchop_threshold: 999999
+
+[tmc2209 stepper_y]
+uart_pin: PD5
+uart_address: 3
+diag_pin: ^PE1
+driver_SGTHRS: 130
+run_current: 0.35
+sense_resistor: 0.22
+stealthchop_threshold: 999999
+
+[tmc2209 stepper_z]
+uart_pin: PD5
+uart_address: 0
+diag_pin: ^PE3
+driver_SGTHRS: 100
+run_current: 0.35
+sense_resistor: 0.22
+stealthchop_threshold: 999999
+
+[tmc2209 extruder]
+uart_pin: PD5
+uart_address: 2
+diag_pin: ^PA15
+driver_SGTHRS: 100
+run_current: 0.4
+sense_resistor: 0.22
+
+[heater_bed]
+heater_pin: PB0
+sensor_type: EPCOS 100K B57560G104F
+sensor_pin: PA4
+control: pid
+pid_Kp: 120
+pid_Ki: 1.5
+pid_Kd: 600
+min_temp: 10
+max_temp: 110
+
+# Hotend fan.
+[heater_fan hotend_fan]
+pin: PE9
+tachometer_pin: PE14
+
+# Part cooling fan.
+[fan]
+pin: PE11
+tachometer_pin: PE10
+
+# The SuperPINDA has built-in temperature compensation and no thermistor output,
+# so no compensation table is needed. The PINDA thermistor is otherwise on pin PA6.
+[probe]
+pin: PA8
+x_offset: -29
+y_offset: -3
+z_offset: 0
+speed: 6.0
+
+[filament_switch_sensor filament_sensor]
+switch_pin: ^PB4
+pause_on_runout: True
+
+[mcu]
+serial: /dev/serial/by-id/usb-Klipper_stm32f407xx_3100380013504E4E53353420-if00
+restart_method: command
+
+[printer]
+kinematics: cartesian
+max_velocity: 180
+max_accel: 1250
+max_z_velocity: 12
+max_z_accel: 400

config/generic-radds.cfg

@@ -0,0 +1,114 @@
+# This file contains common pin mappings for RADDS (v1.5) boards.  To
+# use this config, the firmware should be compiled for the Arduino
+# Due.
+
+# See docs/Config_Reference.md for a description of parameters.
+
+# Temp sensor pins: PA16..PA6
+# Mosfet Pins: PC23 (Heatbed), PC22, PC21, PD7, PD8, PB27
+
+[stepper_x]
+step_pin: PA15
+dir_pin: PA14
+enable_pin: PD1
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^PD3
+#endstop_pin: ^PC2
+position_endstop: 0
+position_max: 200
+homing_speed: 50
+
+[stepper_y]
+step_pin: PA12
+dir_pin: !PA13
+enable_pin: PB26
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^PD9
+#endstop_pin: ^PC4
+position_endstop: 0
+position_max: 200
+homing_speed: 50
+
+[stepper_z]
+step_pin: PB25
+dir_pin: PC28
+enable_pin: PD5
+microsteps: 16
+rotation_distance: 8
+endstop_pin: ^PD10
+#endstop_pin: ^PC6
+position_endstop: 0.5
+position_max: 200
+
+[extruder]
+step_pin: PA2
+dir_pin: PA3
+enable_pin: PB17
+microsteps: 16
+rotation_distance: 33.500
+nozzle_diameter: 0.400
+filament_diameter: 1.750
+heater_pin: PB27
+sensor_type: EPCOS 100K B57560G104F
+sensor_pin: PA16
+control: pid
+pid_Kp: 22.2
+pid_Ki: 1.08
+pid_Kd: 114
+min_temp: 0
+max_temp: 250
+
+#[extruder1]
+#step_pin:           PB19
+#dir_pin:            PB18
+#enable_pin:         PB20
+
+#[extruder2]
+#step_pin:           PC12
+#dir_pin:            PB14
+#enable_pin:         PC14
+
+[heater_bed]
+heater_pin: PC23
+sensor_type: EPCOS 100K B57560G104F
+sensor_pin: PA24
+control: watermark
+min_temp: 0
+max_temp: 130
+
+[fan]
+pin: PC21
+
+#[heater_fan heatbreak_cooling_fan]
+#pin: PC22
+
+[mcu]
+serial: /dev/ttyACM0
+
+[printer]
+kinematics: cartesian
+max_velocity: 300
+max_accel: 3000
+max_z_velocity: 5
+max_z_accel: 100
+
+# "RepRapDiscount 2004 Smart Controller" type displays
+#[display]
+#lcd_type: hd44780
+#rs_pin: PA19
+#e_pin: PA20
+#d4_pin: PC19
+#d5_pin: PC18
+#d6_pin: PC17
+#d7_pin: PC16
+#encoder_pins: ^PB21, ^PC13
+#click_pin: ^!PC15
+
+# "RepRapDiscount 128x64 Full Graphic Smart Controller" type displays
+#[display]
+#lcd_type: st7920
+#cs_pin: PA19
+#sclk_pin: PC19
+#sid_pin: PA20

config/generic-rambo.cfg

@@ -0,0 +1,126 @@
+# This file contains common pin mappings for RAMBo boards. To use this
+# config, the firmware should be compiled for the AVR atmega2560.
+
+# See docs/Config_Reference.md for a description of parameters.
+
+[stepper_x]
+step_pin: PC0
+dir_pin: PL1
+enable_pin: !PA7
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^PB6
+#endstop_pin: ^PA2
+position_endstop: 0
+position_max: 200
+homing_speed: 50
+
+[stepper_y]
+step_pin: PC1
+dir_pin: !PL0
+enable_pin: !PA6
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^PB5
+#endstop_pin: ^PA1
+position_endstop: 0
+position_max: 200
+homing_speed: 50
+
+[stepper_z]
+step_pin: PC2
+dir_pin: PL2
+enable_pin: !PA5
+microsteps: 16
+rotation_distance: 8
+endstop_pin: ^PB4
+#endstop_pin: ^PC7
+position_endstop: 0.5
+position_max: 200
+
+[extruder]
+step_pin: PC3
+dir_pin: PL6
+enable_pin: !PA4
+microsteps: 16
+rotation_distance: 33.500
+nozzle_diameter: 0.400
+filament_diameter: 1.750
+heater_pin: PH6
+sensor_type: EPCOS 100K B57560G104F
+sensor_pin: PF0
+control: pid
+pid_Kp: 22.2
+pid_Ki: 1.08
+pid_Kd: 114
+min_temp: 0
+max_temp: 250
+
+#[extruder1]
+#step_pin: PC4
+#dir_pin: PL7
+#enable_pin: !PA3
+#heater_pin: PH4
+#sensor_pin: PF1
+#...
+
+[heater_bed]
+heater_pin: PE5
+sensor_type: EPCOS 100K B57560G104F
+sensor_pin: PF2
+control: watermark
+min_temp: 0
+max_temp: 130
+
+[fan]
+pin: PH5
+
+#[heater_fan heatbreak_cooling_fan]
+#pin: PH3
+
+[mcu]
+serial: /dev/ttyACM0
+
+[printer]
+kinematics: cartesian
+max_velocity: 300
+max_accel: 3000
+max_z_velocity: 5
+max_z_accel: 100
+
+[ad5206 stepper_digipot]
+enable_pin: PD7
+# Scale the config so that the channel value can be specified in amps.
+# (For Rambo v1.0d boards, use 1.56 instead.)
+scale: 2.08
+# Channel 1 is E0, 2 is E1, 3 is unused, 4 is Z, 5 is X, 6 is Y
+channel_1: 1.34
+channel_2: 1.0
+channel_4: 1.1
+channel_5: 1.1
+channel_6: 1.1
+
+# Enable 16 micro-steps on steppers X, Y, Z, E0, E1
+[static_digital_output stepper_config]
+pins:
+    PG1, PG0,
+    PK7, PG2,
+    PK6, PK5,
+    PK3, PK4,
+    PK1, PK2
+
+[static_digital_output yellow_led]
+pins: !PB7
+
+# Common EXP1 / EXP2 (display) pins
+[board_pins]
+aliases:
+    # Common EXP1/EXP2 headers found on RAMBo v1.4
+    EXP1_1=PE6, EXP1_3=PG3, EXP1_5=PJ2, EXP1_7=PJ7, EXP1_9=<GND>,
+    EXP1_2=PE2, EXP1_4=PG4, EXP1_6=PJ3, EXP1_8=PJ4, EXP1_10=<5V>,
+    # EXP2 header
+    EXP2_1=PB3, EXP2_3=PJ5, EXP2_5=PJ6, EXP2_7=PD4, EXP2_9=<GND>,
+    EXP2_2=PB1, EXP2_4=PB0, EXP2_6=PB2, EXP2_8=PE7, EXP2_10=PH2
+    # Pins EXP2_1, EXP2_6, EXP2_2 are also MISO, MOSI, SCK of bus "spi"
+
+# See the sample-lcd.cfg file for definitions of common LCD displays.

config/generic-ramps.cfg

@@ -0,0 +1,101 @@
+# This file contains common pin mappings for RAMPS (v1.3 and later)
+# boards. RAMPS boards typically use a firmware compiled for the AVR
+# atmega2560 (though the atmega1280 is also possible).
+
+# See docs/Config_Reference.md for a description of parameters.
+
+[stepper_x]
+step_pin: PF0
+dir_pin: PF1
+enable_pin: !PD7
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^PE5
+#endstop_pin: ^PE4
+position_endstop: 0
+position_max: 200
+homing_speed: 50
+
+[stepper_y]
+step_pin: PF6
+dir_pin: !PF7
+enable_pin: !PF2
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^PJ1
+#endstop_pin: ^PJ0
+position_endstop: 0
+position_max: 200
+homing_speed: 50
+
+[stepper_z]
+step_pin: PL3
+dir_pin: PL1
+enable_pin: !PK0
+microsteps: 16
+rotation_distance: 8
+endstop_pin: ^PD3
+#endstop_pin: ^PD2
+position_endstop: 0.5
+position_max: 200
+
+[extruder]
+step_pin: PA4
+dir_pin: PA6
+enable_pin: !PA2
+microsteps: 16
+rotation_distance: 33.500
+nozzle_diameter: 0.400
+filament_diameter: 1.750
+heater_pin: PB4
+sensor_type: EPCOS 100K B57560G104F
+sensor_pin: PK5
+control: pid
+pid_Kp: 22.2
+pid_Ki: 1.08
+pid_Kd: 114
+min_temp: 0
+max_temp: 250
+
+#[extruder1]
+#step_pin: PC1
+#dir_pin: PC3
+#enable_pin: !PC7
+#heater_pin: PH6
+#sensor_pin: PK7
+#...
+
+[heater_bed]
+heater_pin: PH5
+sensor_type: EPCOS 100K B57560G104F
+sensor_pin: PK6
+control: watermark
+min_temp: 0
+max_temp: 130
+
+[fan]
+pin: PH6
+
+[mcu]
+serial: /dev/ttyACM0
+
+[printer]
+kinematics: cartesian
+max_velocity: 300
+max_accel: 3000
+max_z_velocity: 5
+max_z_accel: 100
+
+# Common EXP1 / EXP2 (display) pins
+[board_pins]
+aliases:
+    # Common EXP1 header found on many "all-in-one" ramps clones
+    EXP1_1=PC0, EXP1_3=PH0, EXP1_5=PA1, EXP1_7=PA5, EXP1_9=<GND>,
+    EXP1_2=PC2, EXP1_4=PH1, EXP1_6=PA3, EXP1_8=PA7, EXP1_10=<5V>,
+    # EXP2 header
+    EXP2_1=PB3, EXP2_3=PC6, EXP2_5=PC4, EXP2_7=PL0, EXP2_9=<GND>,
+    EXP2_2=PB1, EXP2_4=PB0, EXP2_6=PB2, EXP2_8=PG0, EXP2_10=<RST>
+    # Pins EXP2_1, EXP2_6, EXP2_2 are also MISO, MOSI, SCK of bus "spi"
+    # Note, some boards wire: EXP2_8=<RST>, EXP2_10=PG0
+
+# See the sample-lcd.cfg file for definitions of common LCD displays.

config/generic-re-arm.cfg

@@ -0,0 +1,105 @@
+# This file contains common pin mappings for Re-Arm. To use this
+# config, the firmware should be compiled for the LPC1768.
+
+# See docs/Config_Reference.md for a description of parameters.
+
+[stepper_x]
+step_pin: P2.1
+dir_pin: P0.11
+enable_pin: !P0.10
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^P1.24
+#endstop_pin: ^P1.25
+position_endstop: 0.5
+position_min: 0
+position_max: 200
+homing_speed: 50
+
+# The stepper_y section is used to describe the Y axis as well as the
+# stepper controlling the X-Y movement.
+[stepper_y]
+step_pin: P2.2
+dir_pin: P0.20
+enable_pin: !P0.19
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^P1.26
+#endstop_pin: ^P1.27
+position_endstop: 0
+position_max: 200
+homing_speed: 50
+
+[stepper_z]
+step_pin: P2.3
+dir_pin: P0.22
+enable_pin: !P0.21
+microsteps: 16
+rotation_distance: 8
+endstop_pin: ^P1.29
+#endstop_pin: ^P1.28
+position_endstop: 0.5
+position_min: 0
+position_max: 200
+
+[extruder]
+step_pin: P2.0
+dir_pin: P0.5
+enable_pin: !P0.4
+microsteps: 16
+rotation_distance: 33.500
+nozzle_diameter: 0.400
+filament_diameter: 1.750
+heater_pin: P2.5
+sensor_type: EPCOS 100K B57560G104F
+sensor_pin: P0.23
+control: pid
+pid_Kp: 22.2
+pid_Ki: 1.08
+pid_Kd: 114
+min_temp: 0
+max_temp: 250
+
+#[extruder1]
+#step_pin: P2.8
+#dir_pin: P2.13
+#enable_pin: !P4.29
+#heater_pin: P2.4
+#sensor_pin: P0.25
+#...
+
+[heater_bed]
+heater_pin: P2.7
+sensor_type: EPCOS 100K B57560G104F
+sensor_pin: P0.24
+control: watermark
+min_temp: 0
+max_temp: 130
+
+[fan]
+pin: P2.4
+
+[mcu]
+serial: /dev/serial/by-id/usb-Klipper_Klipper_firmware_12345-if00
+
+[printer]
+kinematics: cartesian
+max_velocity: 300
+max_accel: 3000
+max_z_velocity: 5
+max_z_accel: 100
+
+
+# "RepRapDiscount 128x64 Full Graphic Smart Controller" type displays
+# Re-Arm will only work with this type of display
+#[display]
+#lcd_type: st7920
+#cs_pin: P0.16
+#sclk_pin: P0.15
+#sid_pin: P0.18
+#encoder_pins: ^P3.25, ^P3.26
+#click_pin: ^!P2.11
+#kill_pin: ^!P1.22
+# Ground the buzzer pin to prevent stray voltages causing an audible "whine"
+#[static_digital_output buzzer]
+#pins: !P1.30

config/generic-remram.cfg

@@ -0,0 +1,117 @@
+# This file contains common pin mappings for remram boards. To use this
+# config, the firmware should be compiled for the ST stm32f765.
+
+# See docs/Config_Reference.md for a description of parameters.
+
+[mcu]
+serial: /dev/ttyACM0
+
+[printer]
+kinematics: cartesian
+max_velocity: 300
+max_accel: 3000
+max_z_velocity: 5
+max_z_accel: 100
+
+[stepper_x]
+step_pin: PA15
+dir_pin: PC10
+enable_pin: !PC12
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^!PB12  # X_MIN
+position_endstop: 0
+position_max: 200
+homing_speed: 10
+
+[tmc2130 stepper_x]
+cs_pin: PB1
+spi_bus: spi1
+run_current: 0.600
+stealthchop_threshold: 999999
+diag1_pin: ^!PC11
+
+[stepper_y]
+step_pin: PB3
+dir_pin: !PD6
+enable_pin: !PD4
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^!PB14  # Y_MIN
+position_endstop: 0
+position_max: 200
+homing_speed: 10
+
+[tmc2130 stepper_y]
+cs_pin: PB0
+spi_bus: spi1
+run_current: 0.600
+stealthchop_threshold: 999999
+diag1_pin: ^!PD5
+
+[stepper_z]
+step_pin: PB10
+dir_pin: PE13
+enable_pin: !PE15
+microsteps: 16
+rotation_distance: 8
+endstop_pin: ^!PD8  # Z_MIN
+position_endstop: 0.5
+position_max: 200
+homing_speed: 10
+
+[tmc2130 stepper_z]
+cs_pin: PC5
+spi_bus: spi1
+run_current: 0.600
+stealthchop_threshold: 999999
+diag1_pin: ^!PE14
+
+[extruder]
+step_pin: PB11
+dir_pin: PE10
+enable_pin: !PE11
+microsteps: 16
+rotation_distance: 33.500
+nozzle_diameter: 0.400
+filament_diameter: 1.750
+heater_pin: PA3  # HEATER
+sensor_type: Generic 3950
+sensor_pin: PC1  # TEMP2
+control: pid
+pid_Kp: 22.2
+pid_Ki: 1.08
+pid_Kd: 114
+min_temp: 0
+max_temp: 250
+
+[tmc2130 extruder]
+cs_pin: PC4
+spi_bus: spi1
+run_current: 0.600
+stealthchop_threshold: 999999
+diag1_pin: ^!PE12
+
+[heater_fan hotend_fan]
+pin: PA2  # FAN2
+
+[heater_bed]
+heater_pin: PA1  # BED OUT
+sensor_type: Generic 3950
+sensor_pin: PC0  # TEMP1
+control: watermark
+min_temp: 0
+max_temp: 130
+
+[fan]  # Print cooling fan.
+pin: PA0  # FAN1
+
+# [temperature_sensor temp3]
+# sensor_type: Generic 3950
+# sensor_pin: PC2  # TEMP3
+# min_temp: 0
+# max_temp: 300
+# gcode_id: temp3
+
+[static_digital_output yellow_led]
+pins: !PD0  # STATUS LED

config/generic-replicape.cfg

@@ -0,0 +1,137 @@
+# This file contains an example configuration for the Replicape rev B3
+# board. To use this config, one must compile and install the
+# micro-controller code for the "Beaglebone PRU", and then compile and
+# install the micro-controller code a second time for a "Linux
+# process".
+
+# NOTE: Klipper does not alter the input/output state of the
+# Beaglebone pins and it does not control their pull-up resistors.
+# Typically the correct settings are automatically applied when the
+# Beaglebone detects the Replicape board, but if changes are needed
+# they must be specified in a "device tree overlay" or via the
+# config-pin program.
+
+# See docs/Config_Reference.md for a description of parameters.
+
+[mcu]
+serial: /dev/rpmsg_pru30
+
+[mcu host]
+serial: /tmp/klipper_host_mcu
+
+[replicape]
+revision: B3
+host_mcu: host
+stepper_x_microstep_mode: spread16
+stepper_x_current: 0.5
+stepper_y_microstep_mode: spread16
+stepper_y_current: 0.5
+stepper_z_microstep_mode: spread16
+stepper_z_current: 0.5
+stepper_e_microstep_mode: 16
+stepper_e_current: 0.5
+
+[stepper_x]
+step_pin: gpio0_27
+dir_pin: gpio1_29
+enable_pin: replicape:stepper_x_enable
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^gpio3_21
+position_endstop: 0
+position_max: 200
+homing_speed: 50
+
+[stepper_y]
+step_pin: gpio1_12
+dir_pin: gpio0_22
+enable_pin: replicape:stepper_y_enable
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^gpio1_17
+position_endstop: 0
+position_max: 200
+homing_speed: 50
+
+[stepper_z]
+step_pin: gpio0_23
+dir_pin: gpio0_26
+enable_pin: replicape:stepper_z_enable
+microsteps: 16
+rotation_distance: 8
+endstop_pin: ^gpio0_31
+position_endstop: 0
+position_max: 200
+
+[printer]
+kinematics: cartesian
+max_velocity: 300
+max_accel: 3000
+max_z_velocity: 25
+max_z_accel: 30
+
+[extruder]
+step_pin: gpio1_28
+dir_pin: gpio1_15
+enable_pin: replicape:stepper_e_enable
+microsteps: 16
+rotation_distance: 33.500
+nozzle_diameter: 0.400
+filament_diameter: 1.750
+heater_pin: replicape:power_e
+sensor_type: EPCOS 100K B57560G104F
+sensor_pin: host:analog4
+control: pid
+pid_Kp: 22.2
+pid_Ki: 1.08
+pid_Kd: 114
+min_temp: 0
+max_temp: 250
+
+[heater_bed]
+heater_pin: replicape:power_hotbed
+sensor_type: EPCOS 100K B57560G104F
+sensor_pin: host:analog6
+control: watermark
+min_temp: 0
+max_temp: 130
+
+[fan]
+pin: replicape:power_fan0
+
+# The alternative servo pins channels on the endstops x2 and y2 can be used
+# via the special relicape pins servo0 (gpio1_18) and servo1 (gpio1_19).
+#[servo servo_x2]
+#pin: replicape:servo0
+#   PWM output pin controlling the servo. This parameter must be
+#   provided.
+#...
+
+# Providing an example of a switch filament sensor using the Linux MCU for replicape, instead of the PRU which does not have enough memory:
+#[filament_switch_sensor switch_sensor]
+#switch_pin: HOST_X2_STOP
+
+# providing board pin aliases for PRU firmware
+[board_pins]
+aliases:
+   # step/dir pins
+   X_DIR=gpio1_29, X_STEP=gpio0_27, Y_DIR=gpio0_22, Y_STEP=gpio1_12, Z_DIR=gpio0_26, Z_STEP=gpio0_23,
+   E_DIR=gpio1_15, E_STEP=gpio1_28, H_DIR=gpio1_14, H_STEP=gpio1_13,
+   # stepper fault pins
+   FAULT_X=gpio2_4, FAULT_Y=gpio2_5, FAULT_Z=gpio0_15, FAULT_E=gpio2_1, FAULT_H=gpio2_3,
+   # endstops
+   STOP_X1=gpio3_21, STOP_X2=gpio0_30, STOP_Y1=gpio1_17, STOP_Y2=gpio3_17, STOP_Z1=gpio0_31, STOP_Z2=gpio0_4,
+   # enable steppers (all on one pin)
+   STEPPER_ENABLE=gpio0_20,
+   # servos
+   SERVO_0=gpio1_18, SERVO_1=gpio1_19,
+
+[board_pins host]
+mcu: host
+aliases:
+   # Host aliases for Linux MCU
+   HOST_X2_STOP=gpio30, HOST_Y2_STOP=gpio113, HOST_Z2_STOP=gpio4,
+   # Thermistors
+   THERM_E=analog4, THERM_H=analog5, THERM_BED=analog6,
+   # D1W pin
+   DALLAS=gpio2

config/generic-rumba.cfg

@@ -0,0 +1,118 @@
+# This file contains common pin mappings for RUMBA boards.  To use
+# this config, the firmware should be compiled for the AVR atmega2560.
+
+# See docs/Config_Reference.md for a description of parameters.
+
+[stepper_x]
+step_pin: PH0
+dir_pin: PH1
+enable_pin: !PL1
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^PC0
+#endstop_pin: ^PC1
+position_endstop: 0
+position_max: 200
+homing_speed: 50
+
+[stepper_y]
+step_pin: PF0
+dir_pin: !PL2
+enable_pin: !PF1
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^PC2
+#endstop_pin: ^PC3
+position_endstop: 0
+position_max: 200
+homing_speed: 50
+
+[stepper_z]
+step_pin: PF3
+dir_pin: PF2
+enable_pin: !PK0
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^PC4
+#endstop_pin: ^PC5
+position_endstop: 0.5
+position_max: 200
+
+[extruder]
+step_pin: PA1
+dir_pin: PA0
+enable_pin: !PA2
+microsteps: 16
+rotation_distance: 33.500
+nozzle_diameter: 0.400
+filament_diameter: 1.750
+heater_pin: PE4
+sensor_type: EPCOS 100K B57560G104F
+sensor_pin: PK7
+control: pid
+pid_Kp: 22.2
+pid_Ki: 1.08
+pid_Kd: 114
+min_temp: 0
+max_temp: 250
+
+#[extruder1]
+#step_pin: PA4
+#dir_pin: PA3
+#enable_pin: !PA5
+#heater_pin: PE5
+#sensor_pin: PK6
+#...
+
+#[extruder2]
+#step_pin: PA7
+#dir_pin: PA6
+#enable_pin: !PG2
+#heater_pin: PH3
+#sensor_pin: PK5
+#...
+
+[heater_bed]
+heater_pin: PH6
+sensor_type: Generic 3950
+sensor_pin: PK3
+control: watermark
+min_temp: 0
+max_temp: 130
+
+[fan]
+pin: PH4
+
+#[heater_fan fan1]
+#pin: PH5
+
+[mcu]
+serial: /dev/ttyACM0
+
+[printer]
+kinematics: cartesian
+max_velocity: 300
+max_accel: 3000
+max_z_velocity: 5
+max_z_accel: 100
+
+# "RepRapDiscount 2004 Smart Controller" type displays
+#[display]
+#lcd_type: hd44780
+#rs_pin: PD2
+#e_pin: PL7
+#d4_pin: PD3
+#d5_pin: PD7
+#d6_pin: PG0
+#d7_pin: PG1
+#encoder_pins: ^PB5, ^PB6
+#click_pin: ^!PL6
+
+# "RepRapDiscount 128x64 Full Graphic Smart Controller" type displays
+#[display]
+#lcd_type: st7920
+#cs_pin: PD2
+#sclk_pin: PD3
+#sid_pin: PL7
+#encoder_pins: ^PB5, ^PB6
+#click_pin: ^!PL6

config/generic-ruramps-v1.3.cfg

@@ -0,0 +1,85 @@
+# This file contains common pin mappings for RuRamps (v1.3) boards.  To
+# use this config, the firmware should be compiled for the Arduino
+# Due.
+
+# See docs/Config_Reference.md for a description of parameters.
+
+[stepper_x]
+step_pin: PC5
+dir_pin: PC4
+enable_pin: !PA7
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^PC7
+position_endstop: 0
+position_max: 200
+homing_speed: 50
+
+[stepper_y]
+step_pin: PD10
+dir_pin: PC3
+enable_pin: !PA7
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^PC9
+position_endstop: 0
+position_max: 200
+homing_speed: 50
+
+[stepper_z]
+step_pin: PD9
+dir_pin: PB25
+enable_pin: !PA7
+microsteps: 16
+rotation_distance: 8
+endstop_pin: ^PA20
+position_endstop: 0
+position_max: 200
+homing_speed: 50
+
+[extruder]
+step_pin: PD6
+dir_pin: PD3
+enable_pin: !PC1
+microsteps: 16
+rotation_distance: 33.500
+nozzle_diameter: 0.400
+filament_diameter: 1.750
+heater_pin: PB27
+sensor_type: EPCOS 100K B57560G104F
+sensor_pin: PA16
+control: pid
+pid_kp: 15.572
+pid_ki: 0.446
+pid_kd: 136.064
+min_temp: 0
+max_temp: 270
+
+#[extruder1]
+#step_pin: PB26
+#dir_pin: PA15
+#enable_pin: !PD1
+
+[heater_bed]
+heater_pin: PC23
+sensor_type: EPCOS 100K B57560G104F
+sensor_pin: PA6
+control: watermark
+min_temp: 0
+max_temp: 130
+
+[fan]
+pin: PB18
+
+#[heater_fan extruder_cooler_fan]
+#pin: PB17
+
+[mcu]
+serial: /dev/ttyACM0
+
+[printer]
+kinematics: cartesian
+max_velocity: 300
+max_accel: 3000
+max_z_velocity: 5
+max_z_accel: 100