v3.2.2 - fixed some bugs performance improvement

v3.2.2 - fixed some bugs performance improvement

.gitignore

@@ -1,3 +1,6 @@
 # Ignore Mac DS_Store files
 .DS_Store
 **/.DS_Store
+
+# Ignore IntelliJ IDEA project directory
+.idea

nspanel_esphome.yaml

@@ -7,7 +7,7 @@
 
 
 ##### ADVANCED CONFIGURATION - activate only when you know what you do ##############################
-# substitutions: 
+# substitutions:
   # ## usage of secrets-file ## -> comment in ###### Change ME ######
   # device_name: "nspanel-name" # Wird im Blueprint benötigt!
   # wifi_ssid: !secret nspanel_wifi_ssid # add in your esphome secrets file.
@@ -36,7 +36,7 @@ wifi:
   ssid: ${wifi_ssid}
   password: ${wifi_password}
   power_save_mode: none
-  ##### advanced config - uncomment to use static IP-Config #####  
+  ##### advanced config - uncomment to use static IP-Config #####
   # manual_ip:
   #   static_ip: ${ip}
   #   gateway: ${gw}
@@ -49,15 +49,19 @@ wifi:
     password: ${wifi_password}
 
 ##### Functionality for the Nextion display #####
-external_components:
-  - source: github://pr#2956
-    components: [nextion]
-    refresh: 1h
+# external_components:
+#   - source: github://pr#2956
+#     components: [nextion]
+#     refresh: 1h
 
 ##### ESPHOME CONFIGURATION #####
 esphome:
   name: ${device_name}
   min_version: 2022.10.2
+  on_boot:
+    priority: 601
+    then:
+      - lambda: id(disp1).send_command_printf("DRAKJHSUYDGBNCJHGJKSHBDN");
 
 ##### TYPE OF ESP BOARD #####
 esp32:
@@ -70,13 +74,13 @@ web_server:
   auth:
     username: admin
     password: ${wifi_password}
-    ##### advanced config - change to use web_password ##### 
+    ##### advanced config - change to use web_password #####
     # password: ${web_password}
 
 ##### OTA PASSWORD #####
 ota:
   password: ${wifi_password}
-  ##### advanced config - change to use ota_password ##### 
+  ##### advanced config - change to use ota_password #####
   # password: ${ota_password}
   safe_mode: true
   reboot_timeout: 3min
@@ -107,16 +111,26 @@ uart:
   baud_rate: 115200
   id: tf_uart
 
-###### REBOOT BUTTON #####
+##### START - BUTTON CONFIGURATION #####
 button:
+  ###### REBOOT BUTTON #####
   - platform: restart
     name: ${device_name} Restart
     id: restart_nspanel
 
+  ##### UPDATE TFT DISPLAY #####
+  - platform: template
+    name: ${device_name} Update TFT display
+    icon: mdi:file-sync
+    id: tft_update
+    entity_category: config
+    on_press:
+      - delay: 16ms
+      - lambda: id(disp1).upload_tft();
 
 ##### START - API CONFIGURATION #####
 api:
-  ##### advanced config - activate to use api_password ##### 
+  ##### advanced config - activate to use api_password #####
   # password: ${api_password}
   services:
 
@@ -132,7 +146,7 @@ api:
       then:
         - lambda: 'id(disp1)->set_tft_url(url.c_str());'
         - lambda: 'id(disp1)->upload_tft();'
-            
+
     ##### Service to send a command "printf" directly to the display #####
     - service: send_command_printf
       variables:
@@ -161,7 +175,7 @@ api:
         - lambda: 'id(disp1).set_component_value(component.c_str(), message);'
 
     ##### Service to send a command "hide componente" directly to the display #####
-    - service: send_command_hide
+    - service: send_command_hide ### unused ###
       variables:
         component: string
       then:
@@ -170,7 +184,7 @@ api:
         - lambda: 'id(disp1).hide_component(component.c_str());'
 
     ##### Service to send a command "show componente" directly to the display #####
-    - service: send_command_show
+    - service: send_command_show ### unused ###
       variables:
         component: string
       then:
@@ -178,6 +192,13 @@ api:
               switch.is_on: nextion_init
         - lambda: 'id(disp1).show_component(component.c_str());'
 
+    ##### Service to send a command "show ALL componente" directly to the display #####
+    - service: send_command_show_all ### unused ###
+      then:
+        - wait_until:
+              switch.is_on: nextion_init
+        - lambda: 'id(disp1).show_component("255");'
+
     ##### Service to send a command "font color" directly to the display #####
     - service: send_command_font_color
       variables:
@@ -187,7 +208,7 @@ api:
         - wait_until:
               switch.is_on: nextion_init
         - lambda: 'id(disp1).set_component_font_color(component.c_str(), message);'
-    
+
     ##### Service to send a command "background color" directly to the display #####
     - service: send_command_background_color
       variables:
@@ -229,6 +250,16 @@ api:
             id(notification_text).publish_state("");
         - switch.turn_off: notification_unread
 
+    ##### Service to set entity-information for settings-page(s)
+    - service: set_settings_entity
+      variables:
+        entity: string
+      then:
+        - wait_until:
+            switch.is_on: nextion_init
+        - lambda: |-
+            id(settings_entity).publish_state(entity.c_str());
+
     ##### Service to play a rtttl tones #####
     # Example tones : https://codebender.cc/sketch:109888#RTTTL%20Songs.ino
     - service: play_rtttl
@@ -236,7 +267,7 @@ api:
         song_str: string
       then:
         - rtttl.play:
-            rtttl: !lambda 'return song_str;'    
+            rtttl: !lambda 'return song_str;'
 
     # Service to show a QR code on the display (ex. for WiFi password)
     - service: qr_code
@@ -275,6 +306,41 @@ api:
             id(disp1).set_component_text_printf("target_temp", "%.1f°", value);
             id(display_target_temp).publish_state(value);
 
+    #### Service to set the buttons ####
+    - service: set_button
+      variables:
+        btn_id: string
+        btn_pic: int
+        btn_bg: int
+        btn_icon_font: int
+        btn_txt_font: int
+        btn_bri_font: int
+        btn_icon: string
+        btn_label: string
+        btn_bri_txt: string
+      then:
+        - wait_until:
+              switch.is_on: nextion_init
+        - lambda: |-
+            // ESP_LOGD("nextion", "set button %s", btn_id.c_str());
+            std::string btnicon = btn_id.c_str() + std::string("icon");
+            std::string btntext = btn_id.c_str() + std::string("text");
+            std::string btnbri = btn_id.c_str() + std::string("bri");
+            id(disp1).send_command_printf("%spic.pic=%i", btn_id.c_str(), btn_pic);
+            id(disp1).set_component_background_color(btnicon.c_str(), btn_bg);
+            id(disp1).set_component_background_color(btntext.c_str(), btn_bg);
+            id(disp1).set_component_background_color(btnbri.c_str(), btn_bg);
+            id(disp1).set_component_font_color(btnicon.c_str(), btn_icon_font);
+            id(disp1).set_component_font_color(btntext.c_str(), btn_txt_font);
+            id(disp1).set_component_font_color(btnbri.c_str(), btn_bri_font);
+            id(disp1).set_component_text_printf(btnicon.c_str(), "%s", btn_icon.c_str());
+            id(disp1).set_component_text_printf(btntext.c_str(), "%s", btn_label.c_str());
+            // id(disp1).set_component_text_printf(btnbri.c_str(), "%s", btn_bri_txt.c_str());
+            if (strcmp(btn_bri_txt.c_str(), "0") != 0) {
+              id(disp1).set_component_text_printf(btnbri.c_str(), "%s", btn_bri_txt.c_str());
+            } else {
+              id(disp1).set_component_text_printf(btnbri.c_str(), " ");
+            }
 
 ##### START - GLOBALS CONFIGURATION #####
 globals:
@@ -338,18 +404,13 @@ binary_sensor:
 
   ###### LEFT BUTTON BELOW DISPLAY TO TOGGLE RELAY#####
   - platform: gpio
-    # name: ${device_name} Left Button
+    name: ${device_name} Left Button
     id: left_button
     pin:
       number: 14
       inverted: true
     on_click:
-    - min_length: 50ms
-      max_length: 1000ms
       then:
-        - binary_sensor.template.publish:
-            id: left_button_short
-            state: ON
         - if:
             condition:
               and:
@@ -358,57 +419,26 @@ binary_sensor:
                       api.connected:
             then:
               - switch.toggle: relay_1
-              - lambda: id(disp1).send_command_printf("home.icon_top_01.pic=51");
-              - lambda: id(disp1).send_command_printf("home.left_bt_pic.pic=98");
               - if: 
                   condition:
                     switch.is_on: relay_1
                   then:
-                    - lambda: id(disp1).send_command_printf("home.icon_top_01.pic=105");
-        - delay: 500ms
-        - binary_sensor.template.publish:
-            id: left_button_short
-            state: OFF
-    on_press:
-      then:
-        - lambda: |-
-            if (id(disp1_currentpage).state == "lightsettings" or id(disp1_currentpage).state == "coversettings") {
-              ESP_LOGD("nspanel", "settingspage -> no press");
-            } else {
-              // ESP_LOGD("nspanel", "release button");
-              id(disp1_lastclick_general).set_state("pressbuttonleft",true,true);
-            }
-    on_release:
-      then:
-        - lambda: |-
-            if (id(disp1_currentpage).state == "lightsettings" or id(disp1_currentpage).state == "coversettings") {
-              ESP_LOGD("nspanel", "settingspage -> no release");
-            } else {
-              // ESP_LOGD("nspanel", "release button");
-              id(disp1_lastclick_general).set_state("releasebuttonleft",true,true);
-            }
-
-  - platform: template
-    name: ${device_name} Left Button
-    id: left_button_short
-    lambda: |-
-      return {};
+                    - lambda: id(disp1).send_command_printf("home.left_bt_pic.pic=78");
+                    - lambda: id(disp1).send_command_printf("home.icon_top_01","\U0000E3A5");
+                  else:
+                    - lambda: id(disp1).send_command_printf("home.left_bt_pic.pic=77");
+                    - lambda: id(disp1).send_command_printf("home.icon_top_01","\U0000FFFF");
 
 
   ##### RIGHT BUTTON BELOW DISPLAY TO TOGGLE RELAY #####
   - platform: gpio
-    # name: ${device_name} Right Button
+    name: ${device_name} Right Button
     id: right_button
     pin:
       number: 27
       inverted: true
     on_click:
-    - min_length: 50ms
-      max_length: 1000ms
       then:
-        - binary_sensor.template.publish:
-            id: right_button_short
-            state: ON
         - if:
             condition:
               and:
@@ -417,47 +447,33 @@ binary_sensor:
                       api.connected:
             then:
               - switch.toggle: relay_2
-              - lambda: id(disp1).send_command_printf("home.icon_top_02.pic=51");
-              - lambda: id(disp1).send_command_printf("home.right_bt_pic.pic=98");
               - if: 
                   condition:
                     switch.is_on: relay_2
                   then:
-                    - lambda: id(disp1).send_command_printf("home.icon_top_02.pic=106");
-        - delay: 500ms
-        - binary_sensor.template.publish:
-            id: right_button_short
-            state: OFF
-    on_press:
-      then:
-        - lambda: |-
-            if (id(disp1_currentpage).state == "lightsettings" or id(disp1_currentpage).state == "coversettings") {
-              ESP_LOGD("nspanel", "settingspage -> no press");
-            } else {
-              // ESP_LOGD("nspanel", "release button");
-              id(disp1_lastclick_general).set_state("pressbuttonright",true,true);
-            }
-    on_release:
-      then:
-        - lambda: |-
-            if (id(disp1_currentpage).state == "lightsettings" or id(disp1_currentpage).state == "coversettings") {
-              ESP_LOGD("nspanel", "settingspage -> no release");
-            } else {
-              // ESP_LOGD("nspanel", "release button");
-              id(disp1_lastclick_general).set_state("releasebuttonright",true,true);
-            }
+                    - lambda: id(disp1).send_command_printf("home.right_bt_pic.pic=78");
+                    - lambda: id(disp1).send_command_printf("home.icon_top_02","\U0000E3A8");
+                  else:
+                    - lambda: id(disp1).send_command_printf("home.right_bt_pic.pic=77");
+                    - lambda: id(disp1).send_command_printf("home.icon_top_02","\U0000FFFF");
 
-  - platform: template
-    name: ${device_name} Right Button
-    id: right_button_short
-    lambda: |-
-      return {};
+  ##### JUMP PAGE TO SETTING PAGE #####
+  - platform: nextion
+    name: $device_name setting page
+    page_id: 0
+    component_id: 52
+    internal: true
+    on_multi_click:
+      - timing:
+          - ON for at least 1s #LONG Press
+        then:
+          - lambda: 'id(disp1).send_command_printf("page settings");'
 
   ##### Restart NSPanel Button - Setting Page #####
   - platform: nextion
     name: ${device_name} Restart
     page_id: 7
-    component_id: 8
+    component_id: 13
     internal: true
     on_click:
       - button.press: restart_nspanel
@@ -466,7 +482,7 @@ binary_sensor:
   - platform: nextion
     name: ${device_name} Restart
     page_id: 8
-    component_id: 5
+    component_id: 4
     internal: true
     on_click:
       - button.press: restart_nspanel
@@ -475,7 +491,7 @@ binary_sensor:
   - platform: nextion
     name: ${device_name} Sleep Modus
     page_id: 7
-    component_id: 3
+    component_id: 14
     internal: true
     on_click:
       - switch.toggle: sleep_modus
@@ -504,6 +520,14 @@ sensor:
   - platform: wifi_signal
     name: ${device_name} RSSI
     update_interval: 60s
+    on_value:
+      - if:
+          condition:
+            wifi.connected:
+          then:
+            - lambda: id(disp1).set_component_text_printf("home.wifi_icon", "%s", "\U0000E5A8");
+          else:
+            - lambda: id(disp1).set_component_text_printf("home.wifi_icon", "%s", "\U0000FFFF");
 
   ##### INTERNAL TEMPERATURE SENSOR, ADC VALUE #####
   - platform: adc
@@ -557,7 +581,7 @@ sensor:
         - number.set:
             id: display_brightness
             value: !lambda 'return int(x);'
-          # send text field percentage of current_lightslider_val  
+          # send text field percentage of current_lightslider_val
         - lambda: id(disp1).set_component_text_printf("settings.a03", "%i", id(display_brightness_global));
 
   ###### Display DIM Brightness GET VALUE FROM NSPanel SLIDER #####
@@ -573,7 +597,7 @@ sensor:
         - number.set:
             id: display_dim_brightness
             value: !lambda 'return int(x);'
-          # send text field percentage of current_lightslider_val  
+          # send text field percentage of current_lightslider_val
         - lambda: id(disp1).set_component_text_printf("settings.a04", "%i", id(display_dim_brightness_global));
 
   ###### Send current page to HA
@@ -616,6 +640,10 @@ text_sensor:
     name: ${device_name} Notification Text
     id: notification_text
 
+  - platform: template
+    name: ${device_name} Settings Entity
+    id: settings_entity
+
   ##### last click sensor, the main action variable - push to HA #####
   - platform: nextion
     nextion_id: disp1
@@ -638,7 +666,7 @@ text_sensor:
             value: !lambda return x;
         - lambda: |-
             id(page_timer)->execute(int(id(page_timeout).state));
-  
+
   ##### last click lightsettings page, the main action variable - push to HA #####
   - platform: nextion
     nextion_id: disp1
@@ -756,7 +784,7 @@ text_sensor:
             id(page_timer)->execute(int(id(page_timeout).state));
 
 
-##### START - SWITCH CONFIGURATION #####  
+##### START - SWITCH CONFIGURATION #####
 switch:
 
   # ##### Restart switch ######
@@ -800,16 +828,6 @@ switch:
     restore_state: false
     optimistic: true
 
-  ##### UPDATE TFT DISPLAY #####
-  - platform: template
-    name: ${device_name} Update TFT display
-    id: tft_update
-    entity_category: config
-    turn_on_action:
-      - delay: 16ms
-      - lambda: id(disp1).upload_tft();
-      - switch.turn_off: tft_update
-
   ##### PHYSICAL SWITCH 1 #####
   - platform: gpio
     name: ${device_name} Relay 1
@@ -823,7 +841,7 @@ switch:
     id: relay_2
     pin:
       number: 19
-      
+
   ##### DISPLAY ALWAYS ON #####
   - platform: gpio
     name: ${device_name} Screen Power
@@ -857,7 +875,7 @@ switch:
             value: '1'
       - lambda:  id(disp1).set_component_value("settings.a02",1);
 
-  ##### Relay Local control Fallback #####  
+  ##### Relay Local control Fallback #####
   - platform: template
     name: ${device_name} Relay 1 Local Fallback
     id: relay1_fallback
@@ -950,11 +968,11 @@ display:
     on_setup:
       then:
         - lambda: id(disp1).send_command_printf("page 8");
-        - lambda: id(disp1).set_component_text_printf("boot.esph_version", "%s", "3.1.0"); ### esphome-version ###
+        - lambda: id(disp1).set_component_text_printf("boot.esph_version", "%s", "3.2.2"); ### esphome-version ###
         - wait_until:
             api.connected
         - lambda: id(disp1).set_component_text_printf("boot.ip_addr", "%s", id(ip_address).state.c_str());
-        - delay: 0.5s
+        - delay: 1s
         - number.set:
             id: display_brightness
             value: !lambda 'return id(display_brightness_global);'
@@ -967,7 +985,7 @@ display:
         - lambda: id(disp1).send_command_printf("settings.dimslider.val=%i", id(display_dim_brightness_global));
         - lambda: id(disp1).send_command_printf("home.sleepmodus.val=%i", id(sleep_modus_global));
         - lambda: id(disp1).set_component_value("settings.a02", id(sleep_modus_global) == 1);
-        - delay: 0.5s
+        - delay: 1s
         - switch.template.publish:
             id: nextion_init
             state: on
@@ -988,4 +1006,3 @@ script:
             ESP_LOGD("nspanel", "timer->home");
             id(disp1).send_command_printf("page 0");
           }
-