Merge pull request #585 from Blackymas/dev

v.3.2.2 - fixed some bugs

nspanel_esphome.yaml

@@ -7,7 +7,7 @@
 
 
 ##### ADVANCED CONFIGURATION - activate only when you know what you do ##############################
-# substitutions: 
+# substitutions:
   # ## usage of secrets-file ## -> comment in ###### Change ME ######
   # device_name: "nspanel-name" # Wird im Blueprint benötigt!
   # wifi_ssid: !secret nspanel_wifi_ssid # add in your esphome secrets file.
@@ -36,7 +36,7 @@ wifi:
   ssid: ${wifi_ssid}
   password: ${wifi_password}
   power_save_mode: none
-  ##### advanced config - uncomment to use static IP-Config #####  
+  ##### advanced config - uncomment to use static IP-Config #####
   # manual_ip:
   #   static_ip: ${ip}
   #   gateway: ${gw}
@@ -49,15 +49,19 @@ wifi:
     password: ${wifi_password}
 
 ##### Functionality for the Nextion display #####
-external_components:
-  - source: github://pr#2956
-    components: [nextion]
-    refresh: 1h
+# external_components:
+#   - source: github://pr#2956
+#     components: [nextion]
+#     refresh: 1h
 
 ##### ESPHOME CONFIGURATION #####
 esphome:
   name: ${device_name}
   min_version: 2022.10.2
+  on_boot:
+    priority: 601
+    then:
+      - lambda: id(disp1).send_command_printf("DRAKJHSUYDGBNCJHGJKSHBDN");
 
 ##### TYPE OF ESP BOARD #####
 esp32:
@@ -70,13 +74,13 @@ web_server:
   auth:
     username: admin
     password: ${wifi_password}
-    ##### advanced config - change to use web_password ##### 
+    ##### advanced config - change to use web_password #####
     # password: ${web_password}
 
 ##### OTA PASSWORD #####
 ota:
   password: ${wifi_password}
-  ##### advanced config - change to use ota_password ##### 
+  ##### advanced config - change to use ota_password #####
   # password: ${ota_password}
   safe_mode: true
   reboot_timeout: 3min
@@ -126,7 +130,7 @@ button:
 
 ##### START - API CONFIGURATION #####
 api:
-  ##### advanced config - activate to use api_password ##### 
+  ##### advanced config - activate to use api_password #####
   # password: ${api_password}
   services:
 
@@ -142,7 +146,7 @@ api:
       then:
         - lambda: 'id(disp1)->set_tft_url(url.c_str());'
         - lambda: 'id(disp1)->upload_tft();'
-            
+
     ##### Service to send a command "printf" directly to the display #####
     - service: send_command_printf
       variables:
@@ -204,7 +208,7 @@ api:
         - wait_until:
               switch.is_on: nextion_init
         - lambda: 'id(disp1).set_component_font_color(component.c_str(), message);'
-    
+
     ##### Service to send a command "background color" directly to the display #####
     - service: send_command_background_color
       variables:
@@ -263,7 +267,7 @@ api:
         song_str: string
       then:
         - rtttl.play:
-            rtttl: !lambda 'return song_str;'    
+            rtttl: !lambda 'return song_str;'
 
     # Service to show a QR code on the display (ex. for WiFi password)
     - service: qr_code
@@ -302,6 +306,41 @@ api:
             id(disp1).set_component_text_printf("target_temp", "%.1f°", value);
             id(display_target_temp).publish_state(value);
 
+    #### Service to set the buttons ####
+    - service: set_button
+      variables:
+        btn_id: string
+        btn_pic: int
+        btn_bg: int
+        btn_icon_font: int
+        btn_txt_font: int
+        btn_bri_font: int
+        btn_icon: string
+        btn_label: string
+        btn_bri_txt: string
+      then:
+        - wait_until:
+              switch.is_on: nextion_init
+        - lambda: |-
+            // ESP_LOGD("nextion", "set button %s", btn_id.c_str());
+            std::string btnicon = btn_id.c_str() + std::string("icon");
+            std::string btntext = btn_id.c_str() + std::string("text");
+            std::string btnbri = btn_id.c_str() + std::string("bri");
+            id(disp1).send_command_printf("%spic.pic=%i", btn_id.c_str(), btn_pic);
+            id(disp1).set_component_background_color(btnicon.c_str(), btn_bg);
+            id(disp1).set_component_background_color(btntext.c_str(), btn_bg);
+            id(disp1).set_component_background_color(btnbri.c_str(), btn_bg);
+            id(disp1).set_component_font_color(btnicon.c_str(), btn_icon_font);
+            id(disp1).set_component_font_color(btntext.c_str(), btn_txt_font);
+            id(disp1).set_component_font_color(btnbri.c_str(), btn_bri_font);
+            id(disp1).set_component_text_printf(btnicon.c_str(), "%s", btn_icon.c_str());
+            id(disp1).set_component_text_printf(btntext.c_str(), "%s", btn_label.c_str());
+            // id(disp1).set_component_text_printf(btnbri.c_str(), "%s", btn_bri_txt.c_str());
+            if (strcmp(btn_bri_txt.c_str(), "0") != 0) {
+              id(disp1).set_component_text_printf(btnbri.c_str(), "%s", btn_bri_txt.c_str());
+            } else {
+              id(disp1).set_component_text_printf(btnbri.c_str(), " ");
+            }
 
 ##### START - GLOBALS CONFIGURATION #####
 globals:
@@ -380,13 +419,15 @@ binary_sensor:
                       api.connected:
             then:
               - switch.toggle: relay_1
-              - lambda: id(disp1).send_command_printf("home.icon_top_01.pic=51");
-              - lambda: id(disp1).send_command_printf("home.left_bt_pic.pic=98");
               - if: 
                   condition:
                     switch.is_on: relay_1
                   then:
-                    - lambda: id(disp1).send_command_printf("home.icon_top_01.pic=105");
+                    - lambda: id(disp1).send_command_printf("home.left_bt_pic.pic=78");
+                    - lambda: id(disp1).send_command_printf("home.icon_top_01","\U0000E3A5");
+                  else:
+                    - lambda: id(disp1).send_command_printf("home.left_bt_pic.pic=77");
+                    - lambda: id(disp1).send_command_printf("home.icon_top_01","\U0000FFFF");
 
 
   ##### RIGHT BUTTON BELOW DISPLAY TO TOGGLE RELAY #####
@@ -406,19 +447,21 @@ binary_sensor:
                       api.connected:
             then:
               - switch.toggle: relay_2
-              - lambda: id(disp1).send_command_printf("home.icon_top_02.pic=51");
-              - lambda: id(disp1).send_command_printf("home.right_bt_pic.pic=98");
               - if: 
                   condition:
                     switch.is_on: relay_2
                   then:
-                    - lambda: id(disp1).send_command_printf("home.icon_top_02.pic=106");
+                    - lambda: id(disp1).send_command_printf("home.right_bt_pic.pic=78");
+                    - lambda: id(disp1).send_command_printf("home.icon_top_02","\U0000E3A8");
+                  else:
+                    - lambda: id(disp1).send_command_printf("home.right_bt_pic.pic=77");
+                    - lambda: id(disp1).send_command_printf("home.icon_top_02","\U0000FFFF");
 
   ##### JUMP PAGE TO SETTING PAGE #####
   - platform: nextion
     name: $device_name setting page
     page_id: 0
-    component_id: 53
+    component_id: 52
     internal: true
     on_multi_click:
       - timing:
@@ -430,7 +473,7 @@ binary_sensor:
   - platform: nextion
     name: ${device_name} Restart
     page_id: 7
-    component_id: 15
+    component_id: 13
     internal: true
     on_click:
       - button.press: restart_nspanel
@@ -439,7 +482,7 @@ binary_sensor:
   - platform: nextion
     name: ${device_name} Restart
     page_id: 8
-    component_id: 5
+    component_id: 4
     internal: true
     on_click:
       - button.press: restart_nspanel
@@ -448,7 +491,7 @@ binary_sensor:
   - platform: nextion
     name: ${device_name} Sleep Modus
     page_id: 7
-    component_id: 16
+    component_id: 14
     internal: true
     on_click:
       - switch.toggle: sleep_modus
@@ -538,7 +581,7 @@ sensor:
         - number.set:
             id: display_brightness
             value: !lambda 'return int(x);'
-          # send text field percentage of current_lightslider_val  
+          # send text field percentage of current_lightslider_val
         - lambda: id(disp1).set_component_text_printf("settings.a03", "%i", id(display_brightness_global));
 
   ###### Display DIM Brightness GET VALUE FROM NSPanel SLIDER #####
@@ -554,7 +597,7 @@ sensor:
         - number.set:
             id: display_dim_brightness
             value: !lambda 'return int(x);'
-          # send text field percentage of current_lightslider_val  
+          # send text field percentage of current_lightslider_val
         - lambda: id(disp1).set_component_text_printf("settings.a04", "%i", id(display_dim_brightness_global));
 
   ###### Send current page to HA
@@ -623,7 +666,7 @@ text_sensor:
             value: !lambda return x;
         - lambda: |-
             id(page_timer)->execute(int(id(page_timeout).state));
-  
+
   ##### last click lightsettings page, the main action variable - push to HA #####
   - platform: nextion
     nextion_id: disp1
@@ -741,7 +784,7 @@ text_sensor:
             id(page_timer)->execute(int(id(page_timeout).state));
 
 
-##### START - SWITCH CONFIGURATION #####  
+##### START - SWITCH CONFIGURATION #####
 switch:
 
   # ##### Restart switch ######
@@ -798,7 +841,7 @@ switch:
     id: relay_2
     pin:
       number: 19
-      
+
   ##### DISPLAY ALWAYS ON #####
   - platform: gpio
     name: ${device_name} Screen Power
@@ -832,7 +875,7 @@ switch:
             value: '1'
       - lambda:  id(disp1).set_component_value("settings.a02",1);
 
-  ##### Relay Local control Fallback #####  
+  ##### Relay Local control Fallback #####
   - platform: template
     name: ${device_name} Relay 1 Local Fallback
     id: relay1_fallback
@@ -925,7 +968,7 @@ display:
     on_setup:
       then:
         - lambda: id(disp1).send_command_printf("page 8");
-        - lambda: id(disp1).set_component_text_printf("boot.esph_version", "%s", "3.2"); ### esphome-version ###
+        - lambda: id(disp1).set_component_text_printf("boot.esph_version", "%s", "3.2.2"); ### esphome-version ###
         - wait_until:
             api.connected
         - lambda: id(disp1).set_component_text_printf("boot.ip_addr", "%s", id(ip_address).state.c_str());