refactor(klipper): tweak klipper install dialogs

Signed-off-by: Dominik Willner <th33xitus@gmail.com>
Merge branch 'master' into install-remove-instances
2023-03-13 22:24:03 +01:00 · 2023-03-11 23:54:41 +01:00 · 2023-03-11 23:52:46 +01:00 · 2023-03-11 23:51:36 +01:00 · 2023-03-11 22:22:11 +01:00 · 2023-03-11 20:25:17 +01:00
41 changed files with 1937 additions and 896 deletions
--- a/README.md
+++ b/README.md
@@ -20,32 +20,86 @@
  <a><img src="https://img.shields.io/github/contributors/th33xitus/kiauh"></a>
 </p>

-## **🛠️ Instructions:**
+<hr>

-For downloading this script it is necessary to have git installed.\
-If you haven't, please run `sudo apt-get install git -y` to install git first.\
-After git is installed, use the following commands in the given order to download and execute the script:
+<h2 align="center">
+  📄️ Instructions 📄
+</h2>

-```shell
-cd ~
+### 📋 Prerequisites
+KIAUH is a script that assists you in installing Klipper on a Linux operating system that has
+already been flashed to your Raspberry Pi's (or other SBC's) SD card. As a result, you must ensure 
+that you have a functional Linux system on hand. `Raspberry Pi OS Lite (32bit)` is a recommended Linux image 
+if you are using a Raspberry Pi. The [official Raspberry Pi Imager](https://www.raspberrypi.com/software/) 
+is the simplest way to flash an image like this to an SD card.

-git clone https://github.com/th33xitus/kiauh.git
+* Once you downloaded, installed and launched the Raspberry Pi Imager 
+select `Choose OS -> Raspberry Pi OS (other)`: \
+<p align="center">
+  <img src="https://raw.githubusercontent.com/th33xitus/kiauh/master/resources/screenshots/rpi_imager1.png" alt="KIAUH logo" height="350">
+</p>

-./kiauh/kiauh.sh
-```
+* Then select `Raspberry Pi OS Lite (32bit)`:
+<p align="center">
+  <img src="https://raw.githubusercontent.com/th33xitus/kiauh/master/resources/screenshots/rpi_imager2.png" alt="KIAUH logo" height="350">
+</p>
+
+* Back in the Raspberry Pi Imager's main menu, select the corresponding SD card to which 
+you want to flash the image.
+
+* Make sure to go into the Advaced Option (the cog icon in the lower left corner of the main menu)
+and enable SSH and configure Wi-Fi.
+
+* If you need more help for using the Raspberry Pi Imager, please visit the [official documentation](https://www.raspberrypi.com/documentation/computers/getting-started.html).
+
+These steps **only** apply if you are actually using a Raspberry Pi. In case you want 
+to use a different SBC (like an Orange Pi or any other Pi derivates), please look up on how to get an appropriate Linux image flashed 
+to the SD card before proceeding further (usually done with Balena Etcher in those cases). Also make sure that KIAUH will be able to run 
+and operate on the Linux Distribution you are going to flash. You likely will have the most success with
+distributions based on Debian 11 Bullseye. Read the notes further down below in this document.
+
+### 💾 Download and use KIAUH
 **📢 Disclaimer: Usage of this script happens at your own risk!**

+* **Step 1:** \
+To download this script, it is necessary to have git installed. If you don't have git already installed, or if you are unsure, run the following command:
+```shell
+sudo apt-get install git -y
+```

-## **❗ Notes:**
+* **Step 2:** \
+Once git is installed, use the following command to download KIAUH into your home-directoy:

-**📋 Please see the [Changelog](docs/changelog.md) for possible important changes!**
+```shell
+cd ~ && git clone https://github.com/th33xitus/kiauh.git
+```

- Tested **only** on Raspberry Pi OS Lite (Debian 10 Buster)
-    - Other Debian based distributions can work
-    - Reported to work on Armbian too
- During the use of this script you might be asked for your sudo password. There are several functions involved which need sudo privileges.
+* **Step 3:** \
+Finally start KIAUH by running the next command:

-## **🌐 Sources & Further Information**
+```shell
+./kiauh/kiauh.sh
+```
+
+* **Step 4:** \
+You should now find yourself in the main menu of KIAUH. You will see several actions to choose from depending 
+on what you want to do. To choose an action, simply type the corresponding number into the "Perform action" 
+prompt and confirm by hitting ENTER.
+
+<hr>
+
+<h2 align="center">❗ Notes ❗</h2>
+
+### **📋 Please see the [Changelog](docs/changelog.md) for possible important changes!**
+
+- Mainly tested on Raspberry Pi OS Lite (Debian 10 Buster / Debian 11 Bullseye)
+    - Other Debian based distributions (like Ubuntu 20 to 22) likely work too
+    - Reported to work on Armbian as well but not tested in detail
+- During the use of this script you will be asked for your sudo password. There are several functions involved which need sudo privileges.
+
+<hr>
+
+<h2 align="center">🌐 Sources & Further Information</h2>

 <table>
 <tr>
@@ -78,26 +132,49 @@ git clone https://github.com/th33xitus/kiauh.git
 <th>by <a href="https://github.com/jordanruthe">jordanruthe</a></th>
 <th>by <a href="https://github.com/OctoPrint">OctoPrint</a></th>
 </tr>
+
+<tr>
 <th><h3><a href="https://github.com/nlef/moonraker-telegram-bot">Moonraker-Telegram-Bot</a></h3></th>
 <th><h3><a href="https://github.com/Kragrathea/pgcode">PrettyGCode for Klipper</a></h3></th>
 <th><h3><a href="https://github.com/TheSpaghettiDetective/moonraker-obico">Obico for Klipper</a></h3></th>
-<tr>
 </tr>
+
 <tr>
 <th><img src="https://avatars.githubusercontent.com/u/52351624?v=4" alt="nlef avatar" height="64"></th>
 <th><img src="https://avatars.githubusercontent.com/u/5917231?v=4" alt="Kragrathea avatar" height="64"></th>
 <th><img src="https://avatars.githubusercontent.com/u/46323662?s=200&v=4" alt="Obico logo" height="64"></th>
-
 </tr>
+
 <tr>
 <th>by <a href="https://github.com/nlef">nlef</a></th>
 <th>by <a href="https://github.com/Kragrathea">Kragrathea</a></th>
 <th>by <a href="https://github.com/TheSpaghettiDetective">Obico</a></th>
 </tr>
+
+<tr>
+<th><h3></h3></th>
+<th><h3><a href="https://octoeverywhere.com/?source=kiauh_readme">OctoEverywhere For Klipper</a></h3></th>
+<th><h3></h3></th>
+</tr>
+
+<tr>
+<th></th>
+<th><a href="https://octoeverywhere.com/?source=kiauh_readme"><img src="https://octoeverywhere.com/img/logo.svg" alt="OctoEverywhere Logo" height="64"></a></th>
+<th></th>
+</tr>
+
+<tr>
+<th></th>
+<th>by <a href="https://github.com/QuinnDamerell">Quinn Damerell</a></th>
+<th></th>
+</tr>
+
 </table>

-## **Credits**
+<hr>
+
+<h2 align="center">✨ Credits ✨</h2>

 * A big thank you to [lixxbox](https://github.com/lixxbox) for that awesome KIAUH-Logo!
-* Also a big thank you to everyone who supported my work with a [Ko-fi](https://ko-fi.com/th33xitus) !
+* Also, a big thank you to everyone who supported my work with a [Ko-fi](https://ko-fi.com/th33xitus) !
 * Last but not least: Thank you to all contributors and members of the Klipper Community who like and share this project!
--- a/docs/changelog.md
+++ b/docs/changelog.md
@@ -2,6 +2,19 @@

 This document covers possible important changes to KIAUH.

+### 2023-02-03
+The installer for MJPG-Streamer got replaced by crowsnest. It is an improved webcam service, utilizing ustreamer. 
+Please have a look here for additional info about crowsnest and how to configure it: https://github.com/mainsail-crew/crowsnest \
+It's unsure if the previous MJPG-Streamer installer will be updated and make its way back into KIAUH.
+A big thanks to [KwadFan](https://github.com/KwadFan) for writing the crowsnest implementation.
+
+### 2022-10-31
+Some functions got updated, though not all of them.
+
+The following functions are still currently unavailable:
+- Installation of: MJPG-Streamer
+- All backup functions and the Log-Upload
+
 ### 2022-10-20
 KIAUH has now reached major version 5 !

--- a/kiauh.sh
+++ b/kiauh.sh
@@ -1,7 +1,7 @@
 #!/usr/bin/env bash

 #=======================================================================#
-# Copyright (C) 2020 - 2022 Dominik Willner <th33xitus@gmail.com>       #
+# Copyright (C) 2020 - 2023 Dominik Willner <th33xitus@gmail.com>       #
 #                                                                       #
 # This file is part of KIAUH - Klipper Installation And Update Helper   #
 # https://github.com/th33xitus/kiauh                                    #
@@ -9,13 +9,8 @@
 # This file may be distributed under the terms of the GNU GPLv3 license #
 #=======================================================================#

-# TODO: mjpg-streamer
-# TODO: moonraker-telegram-bot
-# TODO: obico
-# TODO: pretty_gcode
 # TODO: upload_log
 # TODO: all backup functions
-# TODO: octoprint
 # TODO: doublecheck that nothing got missed!

 set -e
--- a/resources/fluidd
+++ b/resources/fluidd
@@ -55,6 +55,7 @@ server {
        proxy_set_header X-Real-IP $remote_addr;
        proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
        proxy_set_header X-Scheme $scheme;
+        proxy_read_timeout 600;
    }

    location /webcam/ {
--- a/resources/klipper.service
+++ b/resources/klipper.service
@@ -1,7 +1,7 @@
 [Unit]
-Description=Klipper 3D Printer Firmware SV1 %INST%
+Description=Klipper 3D Printer Firmware SV1
 Documentation=https://www.klipper3d.org/
-After=network.target
+After=network-online.target
 Wants=udev.target

 [Install]
@@ -10,7 +10,6 @@ WantedBy=multi-user.target
 [Service]
 Type=simple
 User=%USER%
-RemainAfterExit=yes
 WorkingDirectory=/home/%USER%/klipper
 EnvironmentFile=%ENV_FILE%
 ExecStart=%ENV%/bin/python $KLIPPER_ARGS
--- a/resources/mainsail
+++ b/resources/mainsail
@@ -55,6 +55,7 @@ server {
        proxy_set_header X-Real-IP $remote_addr;
        proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
        proxy_set_header X-Scheme $scheme;
+        proxy_read_timeout 600;
    }

    location /webcam/ {
--- a/resources/moonraker-telegram-bot.env
+++ b/resources/moonraker-telegram-bot.env
@@ -0,0 +1 @@
+TELEGRAM_BOT_ARGS="/home/%USER%/moonraker-telegram-bot/bot/main.py -c %CFG% -l %LOG%"
--- a/resources/moonraker-telegram-bot.service
+++ b/resources/moonraker-telegram-bot.service
@@ -1,19 +1,16 @@
-#Systemd service file for Moonraker Telegram Bot
-
 [Unit]
-Description=Starts Moonraker Telegram Bot instance %INST% on startup
+Description=Moonraker Telegram Bot SV1 %INST%
 Documentation=https://github.com/nlef/moonraker-telegram-bot/wiki
-After=network.target
+After=network-online.target

 [Install]
 WantedBy=multi-user.target

 [Service]
-Environment=TELEGRAM_CONF=%CFG%
-Environment=TELEGRAM_LOG=%LOG%
 Type=simple
 User=%USER%
-RemainAfterExit=yes
-ExecStart=%ENV%/bin/python %DIR%/bot/main.py -c ${TELEGRAM_CONF} -l ${TELEGRAM_LOG}
+WorkingDirectory=/home/%USER%/moonraker-telegram-bot
+EnvironmentFile=%ENV_FILE%
+ExecStart=%ENV%/bin/python $TELEGRAM_BOT_ARGS
 Restart=always
 RestartSec=10
--- a/resources/moonraker.conf
+++ b/resources/moonraker.conf
@@ -14,12 +14,12 @@ trusted_clients:
    FE80::/10
    ::1/128
 cors_domains:
-    http://*.lan
-    http://*.local
-    https://my.mainsail.xyz
-    http://my.mainsail.xyz
-    https://app.fluidd.xyz
-    http://app.fluidd.xyz
+    *.lan
+    *.local
+    *://localhost
+    *://localhost:*
+    *://my.mainsail.xyz
+    *://app.fluidd.xyz

 [octoprint_compat]

--- a/resources/moonraker.service
+++ b/resources/moonraker.service
@@ -11,7 +11,6 @@ WantedBy=multi-user.target
 Type=simple
 User=%USER%
 SupplementaryGroups=moonraker-admin
-RemainAfterExit=yes
 WorkingDirectory=/home/%USER%/moonraker
 EnvironmentFile=%ENV_FILE%
 ExecStart=%ENV%/bin/python $MOONRAKER_ARGS
--- a/resources/screenshots/rpi_imager1.png
+++ b/resources/screenshots/rpi_imager1.png
--- a/resources/screenshots/rpi_imager2.png
+++ b/resources/screenshots/rpi_imager2.png
--- a/scripts/backup.sh
+++ b/scripts/backup.sh
@@ -1,7 +1,7 @@
 #!/usr/bin/env bash

 #=======================================================================#
-# Copyright (C) 2020 - 2022 Dominik Willner <th33xitus@gmail.com>       #
+# Copyright (C) 2020 - 2023 Dominik Willner <th33xitus@gmail.com>       #
 #                                                                       #
 # This file is part of KIAUH - Klipper Installation And Update Helper   #
 # https://github.com/th33xitus/kiauh                                    #
--- a/scripts/crowsnest.sh
+++ b/scripts/crowsnest.sh
@@ -0,0 +1,241 @@
+#!/usr/bin/env bash
+
+#=======================================================================#
+# Copyright (C) 2020 - 2023 Dominik Willner <th33xitus@gmail.com>       #
+#                                                                       #
+# This file is part of KIAUH - Klipper Installation And Update Helper   #
+# https://github.com/th33xitus/kiauh                                    #
+#                                                                       #
+# This file may be distributed under the terms of the GNU GPLv3 license #
+#=======================================================================#
+
+#=======================================================================#
+# Crowsnest Installer brought to you by KwadFan <me@stephanwe.de>       #
+# Copyright (C) 2022 KwadFan <me@stephanwe.de>                          #
+# https://github.com/KwadFan/crowsnest                                  #
+#=======================================================================#
+
+# Error Handling
+set -e
+
+# Helper messages
+
+function multi_instance_message(){
+  echo -e "Crowsnest is NOT designed to support multi instances."
+  echo -e "A workaround for this is to choose the most used instance as a 'master'"
+  echo -e "Use this instance to set up your 'crowsnest.conf' and steering it's service.\n"
+  echo -e "Found the following instances:\n"
+  for i in ${1}; do
+    select_msg "${i}"
+  done
+  echo -e "\nLaunching crowsnest's configuration tool ..."
+  continue_config
+}
+
+# Helper funcs
+function clone_crowsnest(){
+  $(command -v git) clone "${CROWSNEST_REPO}" -b master "${CROWSNEST_DIR}"
+}
+
+function check_multi_instance(){
+  local -a instances
+  readarray -t instances < <(find "${HOME}" -regex "${HOME}/[a-zA-Z0-9_]+_data/*" -printf "%P\n" 2> /dev/null | sort)
+  if [[ "${#instances[@]}" -gt 1 ]]; then
+    status_msg "Multi instance install detected ..."
+    multi_instance_message "${instances[*]}"
+    if [[ -d "${HOME}/crowsnest" ]]; then
+      pushd "${HOME}/crowsnest" &> /dev/null || exit 1
+      if ! make config ;then
+        error_msg "Something went wrong! Please try again..."
+        if [[ -f "tools/.config" ]]; then
+          rm -f tools/.config
+        fi
+        exit 1
+      fi
+      if [[ ! -f "tools/.config" ]]; then
+        log_error "failure while generating .config"
+        error_msg "Generating .config failed, installation aborted"
+        exit 1
+      fi
+      popd &> /dev/null || exit 1
+    fi
+  fi
+}
+
+function continue_config() {
+  local reply
+  while true; do
+    read -erp "${cyan}###### Continue with configuration? (y/N):${white} " reply
+    case "${reply}" in
+      Y|y|Yes|yes)
+        select_msg "Yes"
+        break;;
+      N|n|No|no|"")
+        select_msg "No"
+        warn_msg "Installation aborted by user ... Exiting!"
+        exit 1;;
+      *)
+        error_msg "Invalid Input!\n";;
+    esac
+  done
+  return 0
+}
+
+# Install func
+function install_crowsnest(){
+
+  # Step 1: jump to home directory
+  pushd "${HOME}" &> /dev/null || exit 1
+
+  # Step 2: Clone crowsnest repo
+  status_msg "Cloning 'crowsnest' repository ..."
+  if [[ ! -d "${HOME}/crowsnest" && -z "$(ls -A "${HOME}/crowsnest" 2> /dev/null)" ]]; then
+    clone_crowsnest
+  else
+    ok_msg "crowsnest repository already exists ..."
+  fi
+
+  # Step 3: Install dependencies
+  dependency_check git make
+
+  # Step 4: Check for Multi Instance
+  check_multi_instance
+
+  # Step 5: Launch crowsnest installer
+  pushd "${HOME}/crowsnest" &> /dev/null || exit 1
+  title_msg "Installer will prompt you for sudo password!"
+  status_msg "Launching crowsnest installer ..."
+  if ! sudo make install; then
+    error_msg "Something went wrong! Please try again..."
+    exit 1
+  fi
+
+  # Step 5: Leave directory (twice due two pushd)
+  popd &> /dev/null || exit 1
+  popd &> /dev/null || exit 1
+}
+
+# Remove func
+function remove_crowsnest(){
+  pushd "${HOME}/crowsnest" &> /dev/null || exit 1
+  title_msg "Uninstaller will prompt you for sudo password!"
+  status_msg "Launching crowsnest uninstaller ..."
+  if ! make uninstall; then
+    error_msg "Something went wrong! Please try again..."
+    exit 1
+  fi
+  if [[ -e "${CROWSNEST_DIR}" ]]; then
+    status_msg "Removing crowsnest directory ..."
+    rm -rf "${CROWSNEST_DIR}"
+    ok_msg "Directory removed!"
+  fi
+}
+
+# Status funcs
+get_crowsnest_status(){
+  local -a files
+  local env_file
+  env_file="$(grep "EnvironmentFile" /etc/systemd/system/crowsnest.service 2>/dev/null | cut -d "=" -f2)"
+  files=(
+    "${CROWSNEST_DIR}"
+    "/usr/local/bin/crowsnest"
+    "/etc/logrotate.d/crowsnest"
+    "/etc/systemd/system/crowsnest.service"
+    "${env_file}"
+    )
+  local count
+  count=0
+
+  for file in "${files[@]}"; do
+    [[ -e "${file}" ]] && count=$(( count +1 ))
+  done
+  if [[ "${count}" -eq "${#files[*]}" ]]; then
+    echo "Installed"
+  elif [[ "${count}" -gt 0 ]]; then
+    echo "Incomplete!"
+  else
+    echo "Not installed!"
+  fi
+}
+
+# Update funcs
+# Shameless stolen from KlipperScreen.sh
+function get_local_crowsnest_commit() {
+  [[ ! -d ${CROWSNEST_DIR} || ! -d "${CROWSNEST_DIR}/.git" ]] && return
+
+  local commit
+  cd "${CROWSNEST_DIR}"
+  commit="$(git describe HEAD --always --tags | cut -d "-" -f 1,2)"
+  echo "${commit}"
+}
+
+function get_remote_crowsnest_commit() {
+  [[ ! -d ${CROWSNEST_DIR} || ! -d "${CROWSNEST_DIR}/.git" ]] && return
+
+  local commit
+  cd "${CROWSNEST_DIR}" && git fetch origin -q
+  commit=$(git describe origin/master --always --tags | cut -d "-" -f 1,2)
+  echo "${commit}"
+}
+
+function compare_crowsnest_versions() {
+  local versions local_ver remote_ver
+  local_ver="$(get_local_crowsnest_commit)"
+  remote_ver="$(get_remote_crowsnest_commit)"
+
+  if [[ ${local_ver} != "${remote_ver}" ]]; then
+    versions="${yellow}$(printf " %-14s" "${local_ver}")${white}"
+    versions+="|${green}$(printf " %-13s" "${remote_ver}")${white}"
+    # add moonraker to application_updates_available in kiauh.ini
+    add_to_application_updates "crowsnest"
+  else
+    versions="${green}$(printf " %-14s" "${local_ver}")${white}"
+    versions+="|${green}$(printf " %-13s" "${remote_ver}")${white}"
+  fi
+
+  echo "${versions}"
+}
+
+function install_crowsnest_dependencies() {
+  local packages
+  local install_script="${CROWSNEST_DIR}/tools/install.sh"
+
+  ### read PKGLIST from official install-script
+  status_msg "Reading dependencies..."
+  # shellcheck disable=SC2016
+  packages="$(grep "PKGLIST=" "${install_script}" | cut -d'"' -f2 | sed 's/\${PKGLIST}//g' | tr -d '\n')"
+
+  echo "${cyan}${packages}${white}" | tr '[:space:]' '\n'
+    read -r -a packages <<< "${packages}"
+
+  ### Update system package info
+  status_msg "Updating package lists..."
+  if ! sudo apt-get update --allow-releaseinfo-change; then
+    log_error "failure while updating package lists"
+    error_msg "Updating package lists failed!"
+    exit 1
+  fi
+
+  ### Install required packages
+  status_msg "Installing required packages..."
+  if ! sudo apt-get install --yes "${packages[@]}"; then
+    log_error "failure while installing required crowsnest packages"
+    error_msg "Installing required packages failed!"
+    exit 1
+  fi
+}
+
+function update_crowsnest() {
+  do_action_service "stop" "crowsnest"
+
+  if [[ ! -d ${CROWSNEST_DIR} ]]; then
+    clone_crowsnest
+  else
+    status_msg "Updating Crowsnest ..."
+    cd "${CROWSNEST_DIR}" && git pull
+    ### read PKGLIST and install possible new dependencies
+    install_crowsnest_dependencies
+  fi
+  ok_msg "Update complete!"
+  do_action_service "restart" "crowsnest"
+}
--- a/scripts/flash_klipper.sh
+++ b/scripts/flash_klipper.sh
@@ -1,7 +1,7 @@
 #!/usr/bin/env bash

 #=======================================================================#
-# Copyright (C) 2020 - 2022 Dominik Willner <th33xitus@gmail.com>       #
+# Copyright (C) 2020 - 2023 Dominik Willner <th33xitus@gmail.com>       #
 #                                                                       #
 # This file is part of KIAUH - Klipper Installation And Update Helper   #
 # https://github.com/th33xitus/kiauh                                    #
--- a/scripts/fluidd.sh
+++ b/scripts/fluidd.sh
@@ -1,7 +1,7 @@
 #!/usr/bin/env bash

 #=======================================================================#
-# Copyright (C) 2020 - 2022 Dominik Willner <th33xitus@gmail.com>       #
+# Copyright (C) 2020 - 2023 Dominik Willner <th33xitus@gmail.com>       #
 #                                                                       #
 # This file is part of KIAUH - Klipper Installation And Update Helper   #
 # https://github.com/th33xitus/kiauh                                    #
@@ -39,30 +39,6 @@ function install_fluidd() {
  ### check if another site already listens to port 80
  fluidd_port_check

-#  ### ask user to install mjpg-streamer
-#  local install_mjpg_streamer
-#  if [[ ! -f "${SYSTEMD}/webcamd.service" ]]; then
-#    while true; do
-#      echo
-#      top_border
-#      echo -e "| Install MJPG-Streamer for webcam support?             |"
-#      bottom_border
-#      read -p "${cyan}###### Please select (y/N):${white} " yn
-#      case "${yn}" in
-#        Y|y|Yes|yes)
-#          select_msg "Yes"
-#          install_mjpg_streamer="true"
-#          break;;
-#        N|n|No|no|"")
-#          select_msg "No"
-#          install_mjpg_streamer="false"
-#          break;;
-#        *)
-#          error_msg "Invalid command!";;
-#      esac
-#    done
-#  fi
-
  ### download fluidd
  download_fluidd

@@ -82,9 +58,6 @@ function install_fluidd() {
  ### add fluidd to the update manager in moonraker.conf
  patch_fluidd_update_manager

-  ### install mjpg-streamer
-#  [[ ${install_mjpg_streamer} == "true" ]] && install_mjpg-streamer
-
  fetch_webui_ports #WIP

  ### confirm message
@@ -92,22 +65,21 @@ function install_fluidd() {
 }

 function install_fluidd_macros() {
+  local yn
  while true; do
    echo
    top_border
-    echo -e "| It is recommended to have some important macros in    |"
-    echo -e "| your printer configuration to have Fluidd fully       |"
-    echo -e "| functional and working.                               |"
+    echo -e "| It is recommended to use special macros in order to   |"
+    echo -e "| have Fluidd fully functional and working.             |"
    blank_line
    echo -e "| The recommended macros for Fluidd can be found here:  |"
-    echo -e "| https://docs.fluidd.xyz/configuration/initial_setup   |"
+    echo -e "| https://github.com/fluidd-core/fluidd-config           |"
    blank_line
-    echo -e "| If you already have these macros in your config file, |"
-    echo -e "| skip this step and answer with 'no'.                  |"
+    echo -e "| If you already use these macros skip this step.       |"
    echo -e "| Otherwise you should consider to answer with 'yes' to |"
-    echo -e "| add the recommended example macros to your config.    |"
+    echo -e "| download the recommended macros.                      |"
    bottom_border
-    read -p "${cyan}###### Add the recommended macros? (Y/n):${white} " yn
+    read -p "${cyan}###### Download the recommended macros? (Y/n):${white} " yn
    case "${yn}" in
      Y|y|Yes|yes|"")
        select_msg "Yes"
@@ -124,36 +96,64 @@ function install_fluidd_macros() {
 }

 function download_fluidd_macros() {
-  local fluidd_cfg path configs regex
+  local ms_cfg_repo path configs regex line gcode_dir

-  fluidd_cfg="https://raw.githubusercontent.com/fluidd-core/FluiddPI/master/src/modules/fluidd/filesystem/home/pi/klipper_config/fluidd.cfg"
-  regex="\/home\/${USER}\/([A-Za-z0-9_]+)\/config\/printer\.cfg"
+  ms_cfg_repo="https://github.com/fluidd-core/fluidd-config.git"
+  regex="${HOME//\//\\/}\/([A-Za-z0-9_]+)\/config\/printer\.cfg"
  configs=$(find "${HOME}" -maxdepth 3 -regextype posix-extended -regex "${regex}" | sort)

-  if [[ -n ${configs} ]]; then
-    for config in ${configs}; do
-      path=$(echo "${config}" | rev | cut -d"/" -f2- | rev)
-      if [[ ! -f "${path}/fluidd.cfg" ]]; then
-        status_msg "Downloading fluidd.cfg to ${path} ..."
-        log_info "downloading fluidd.cfg to: ${path}"
-        wget "${fluidd_cfg}" -O "${path}/fluidd.cfg"
-
-        ### replace user 'pi' with current username to prevent issues in cases where the user is not called 'pi'
-        log_info "modify fluidd.cfg"
-        sed -i "/^path: \/home\/pi\/gcode_files/ s/\/home\/pi/\/home\/${USER}/" "${path}/fluidd.cfg"
-
-        ### write include to the very first line of the printer.cfg
-        if ! grep -Eq "^[include fluidd.cfg]$" "${path}/printer.cfg"; then
-          log_info "modify printer.cfg"
-          sed -i "1 i [include fluidd.cfg]" "${path}/printer.cfg"
-        fi
-        ok_msg "Done!"
-      fi
-    done
-  else
+  if [[ -z ${configs} ]]; then
+    print_error "No printer.cfg found! Installation of Macros will be skipped ..."
    log_error "execution stopped! reason: no printer.cfg found"
    return
  fi
+
+  status_msg "Cloning fluidd-config ..."
+  [[ -d "${HOME}/fluidd-config" ]] && rm -rf "${HOME}/fluidd-config"
+  if git clone --recurse-submodules "${ms_cfg_repo}" "${HOME}/fluidd-config"; then
+    for config in ${configs}; do
+      path=$(echo "${config}" | rev | cut -d"/" -f2- | rev)
+
+      if [[ -e "${path}/fluidd.cfg" && ! -h "${path}/fluidd.cfg" ]]; then
+        warn_msg "Attention! Existing fluidd.cfg detected!"
+        warn_msg "The file will be renamed to 'fluidd.bak.cfg' to be able to continue with the installation."
+        if ! mv "${path}/fluidd.cfg" "${path}/fluidd.bak.cfg"; then
+          error_msg "Renaming fluidd.cfg failed! Aborting installation ..."
+          return
+        fi
+      fi
+
+      if [[ -h "${path}/fluidd.cfg" ]]; then
+        warn_msg "Recreating symlink in ${path} ..."
+        rm -rf "${path}/fluidd.cfg"
+      fi
+
+      if ! ln -sf "${HOME}/fluidd-config/client.cfg" "${path}/fluidd.cfg"; then
+        error_msg "Creating symlink failed! Aborting installation ..."
+        return
+      fi
+
+      if ! grep -Eq "^\[include fluidd.cfg\]$" "${path}/printer.cfg"; then
+        log_info "${path}/printer.cfg"
+        sed -i "1 i [include fluidd.cfg]" "${path}/printer.cfg"
+      fi
+
+      line=$(($(grep -n "\[include fluidd.cfg\]" "${path}/printer.cfg" | tail -1 | cut -d: -f1) + 1))
+      gcode_dir=${path/config/gcodes}
+      if ! grep -Eq "^\[virtual_sdcard\]$" "${path}/printer.cfg"; then
+        log_info "${path}/printer.cfg"
+        sed -i "${line} i \[virtual_sdcard]\npath: ${gcode_dir}\non_error_gcode: CANCEL_PRINT\n" "${path}/printer.cfg"
+      fi
+    done
+  else
+    print_error "Cloning failed! Aborting installation ..."
+    log_error "execution stopped! reason: cloning failed"
+    return
+  fi
+
+  patch_fluidd_config_update_manager
+
+  ok_msg "Done!"
 }

 function download_fluidd() {
@@ -191,7 +191,7 @@ function remove_fluidd_dir() {
  rm -rf "${FLUIDD_DIR}" && ok_msg "Directory removed!"
 }

-function remove_fluidd_config() {
+function remove_fluidd_nginx_config() {
  if [[ -e "/etc/nginx/sites-available/fluidd" ]]; then
    status_msg "Removing Fluidd configuration for Nginx ..."
    sudo rm "/etc/nginx/sites-available/fluidd" && ok_msg "File removed!"
@@ -218,7 +218,7 @@ function remove_fluidd_logs() {
 function remove_fluidd_log_symlinks() {
  local files regex

-  regex="\/home\/${USER}\/([A-Za-z0-9_]+)\/logs\/fluidd-.*"
+  regex="${HOME//\//\\/}\/([A-Za-z0-9_]+)\/logs\/fluidd-.*"
  files=$(find "${HOME}" -maxdepth 3 -regextype posix-extended -regex "${regex}" 2> /dev/null | sort)

  if [[ -n ${files} ]]; then
@@ -243,9 +243,18 @@ function remove_legacy_fluidd_log_symlinks() {
  fi
 }

+function remove_fluidd_config() {
+  if [[ -d "${HOME}/fluidd-config"  ]]; then
+    status_msg "Removing ${HOME}/fluidd-config ..."
+    rm -rf "${HOME}/fluidd-config"
+    ok_msg "${HOME}/fluidd-config removed!"
+    print_confirm "Fluidd-Config successfully removed!"
+  fi
+}
+
 function remove_fluidd() {
  remove_fluidd_dir
-  remove_fluidd_config
+  remove_fluidd_nginx_config
  remove_fluidd_logs
  remove_fluidd_log_symlinks
  remove_legacy_fluidd_log_symlinks
@@ -332,8 +341,10 @@ function compare_fluidd_versions() {
 #================================================#

 function get_fluidd_download_url() {
-  local tags latest_tag latest_url stable_tag stable_url url
-  tags=$(curl -s "${FLUIDD_TAGS}" | grep "name" | cut -d'"' -f4)
+  local fl_tags tags latest_tag latest_url stable_tag stable_url url
+
+  fl_tags="https://api.github.com/repos/fluidd-core/fluidd/tags"
+  tags=$(curl -s "${fl_tags}" | grep "name" | cut -d'"' -f4)

  ### latest download url including pre-releases (alpha, beta, rc)
  latest_tag=$(echo "${tags}" | head -1)
@@ -387,7 +398,7 @@ function select_fluidd_port() {
    blank_line
    [[ ${MAINSAIL_PORT} == "80" ]] && echo "|  ● Mainsail                                           |"
    blank_line
-    echo -e "| Make sure you don't choose a port which is already    |"
+    echo -e "| Make sure you don't choose a port which was already   |"
    echo -e "| assigned to another webinterface!                     |"
    blank_line
    echo -e "| Be aware: there is ${red}NO${white} sanity check for the following  |"
@@ -414,12 +425,12 @@ function select_fluidd_port() {

 function patch_fluidd_update_manager() {
  local patched moonraker_configs regex
-  regex="\/home\/${USER}\/([A-Za-z0-9_]+)\/config\/moonraker\.conf"
+  regex="${HOME//\//\\/}\/([A-Za-z0-9_]+)\/config\/moonraker\.conf"
  moonraker_configs=$(find "${HOME}" -maxdepth 3 -type f -regextype posix-extended -regex "${regex}" | sort)

  patched="false"
  for conf in ${moonraker_configs}; do
-    if ! grep -Eq "^\[update_manager fluidd\]$" "${conf}"; then
+    if ! grep -Eq "^\[update_manager fluidd\]\s*$" "${conf}"; then
      ### add new line to conf if it doesn't end with one
      [[ $(tail -c1 "${conf}" | wc -l) -eq 0 ]] && echo "" >> "${conf}"

@@ -443,3 +454,36 @@ MOONRAKER_CONF
    do_action_service "restart" "moonraker"
  fi
 }
+
+function patch_fluidd_config_update_manager() {
+  local patched moonraker_configs regex
+  regex="${HOME//\//\\/}\/([A-Za-z0-9_]+)\/config\/moonraker\.conf"
+  moonraker_configs=$(find "${HOME}" -maxdepth 3 -type f -regextype posix-extended -regex "${regex}" | sort)
+
+  patched="false"
+  for conf in ${moonraker_configs}; do
+    if ! grep -Eq "^\[update_manager fluidd-config\]\s*$" "${conf}"; then
+      ### add new line to conf if it doesn't end with one
+      [[ $(tail -c1 "${conf}" | wc -l) -eq 0 ]] && echo "" >> "${conf}"
+
+      ### add Fluidds update manager section to moonraker.conf
+      status_msg "Adding Fluidd-Config to update manager in file:\n       ${conf}"
+      /bin/sh -c "cat >> ${conf}" << MOONRAKER_CONF
+
+[update_manager fluidd-config]
+type: git_repo
+primary_branch: master
+path: ~/fluidd-config
+origin: https://github.com/fluidd-core/fluidd-config.git
+managed_services: klipper
+MOONRAKER_CONF
+
+    fi
+
+    patched="true"
+  done
+
+  if [[ ${patched} == "true" ]]; then
+    do_action_service "restart" "moonraker"
+  fi
+}
--- a/scripts/gcode_shell_command.sh
+++ b/scripts/gcode_shell_command.sh
@@ -1,7 +1,7 @@
 #!/usr/bin/env bash

 #=======================================================================#
-# Copyright (C) 2020 - 2022 Dominik Willner <th33xitus@gmail.com>       #
+# Copyright (C) 2020 - 2023 Dominik Willner <th33xitus@gmail.com>       #
 #                                                                       #
 # This file is part of KIAUH - Klipper Installation And Update Helper   #
 # https://github.com/th33xitus/kiauh                                    #
@@ -106,7 +106,7 @@ function create_example_shell_command() {
  backup_klipper_config_dir

  local configs regex path
-  regex="\/home\/${USER}\/([A-Za-z0-9_]+)\/config\/printer\.cfg"
+  regex="${HOME//\//\\/}\/([A-Za-z0-9_]+)\/config\/printer\.cfg"
  configs=$(find "${HOME}" -maxdepth 3 -regextype posix-extended -regex "${regex}" | sort)

  for cfg in ${configs}; do
--- a/scripts/globals.sh
+++ b/scripts/globals.sh
@@ -1,7 +1,7 @@
 #!/usr/bin/env bash

 #=======================================================================#
-# Copyright (C) 2020 - 2022 Dominik Willner <th33xitus@gmail.com>       #
+# Copyright (C) 2020 - 2023 Dominik Willner <th33xitus@gmail.com>       #
 #                                                                       #
 # This file is part of KIAUH - Klipper Installation And Update Helper   #
 # https://github.com/th33xitus/kiauh                                    #
@@ -42,13 +42,9 @@ function set_globals() {

  #================= MAINSAIL ===================#
  MAINSAIL_DIR="${HOME}/mainsail"
-  MAINSAIL_REPO_API="https://api.github.com/repos/mainsail-crew/mainsail/releases"
-  MAINSAIL_TAGS="https://api.github.com/repos/mainsail-crew/mainsail/tags"

  #================== FLUIDD ====================#
  FLUIDD_DIR="${HOME}/fluidd"
-  FLUIDD_REPO_API="https://api.github.com/repos/fluidd-core/fluidd/releases"
-  FLUIDD_TAGS="https://api.github.com/repos/fluidd-core/fluidd/tags"

  #=============== KLIPPERSCREEN ================#
  KLIPPERSCREEN_ENV="${HOME}/.KlipperScreen-env"
@@ -72,4 +68,14 @@ function set_globals() {
  #=============== MOONRAKER-OBICO ================#
  MOONRAKER_OBICO_DIR="${HOME}/moonraker-obico"
  MOONRAKER_OBICO_REPO="https://github.com/TheSpaghettiDetective/moonraker-obico.git"
+
+  #=============== OCTOEVERYWHERE ================#
+  OCTOEVERYWHERE_ENV="${HOME}/octoeverywhere-env"
+  OCTOEVERYWHERE_DIR="${HOME}/octoeverywhere"
+  OCTOEVERYWHERE_REPO="https://github.com/QuinnDamerell/OctoPrint-OctoEverywhere.git"
+
+  #=============== Crowsnest ================#
+  CROWSNEST_DIR="${HOME}/crowsnest"
+  CROWSNEST_REPO="https://github.com/mainsail-crew/crowsnest.git"
+
 }
--- a/scripts/klipper.sh
+++ b/scripts/klipper.sh
@@ -1,7 +1,7 @@
 #!/usr/bin/env bash

 #=======================================================================#
-# Copyright (C) 2020 - 2022 Dominik Willner <th33xitus@gmail.com>       #
+# Copyright (C) 2020 - 2023 Dominik Willner <th33xitus@gmail.com>       #
 #                                                                       #
 # This file is part of KIAUH - Klipper Installation And Update Helper   #
 # https://github.com/th33xitus/kiauh                                    #
@@ -11,40 +11,98 @@

 set -e

+#TODO (multi instance):
+# if the klipper installer is started another time while other klipper
+# instances are detected, ask if new instances should be added
+
 #=================================================#
 #================ INSTALL KLIPPER ================#
 #=================================================#

-function klipper_setup_dialog() {
-  status_msg "Initializing Klipper installation ..."
+###
+# this function detects all installed klipper
+# systemd instances and returns their absolute path
+function klipper_systemd() {
+  local services
+  local blacklist
+  local ignore
+  local match

-  local klipper_initd_service
-  local klipper_systemd_services
-  local python_version="${1}" user_input=()
-  local error
+  ###
+  # any service that uses "klipper" in its own name but isn't a full klipper service must be blacklisted using
+  # this variable, otherwise they will be falsely recognized as klipper instances. E.g. "klipper-mcu.service"
+  # is not a klipper service, but related to klippers linux mcu, which also requires its own service file, hence
+  # it must be blacklisted.
+  blacklist="mcu"

-  klipper_initd_service=$(find_klipper_initd)
-  klipper_systemd_services=$(find_klipper_systemd)
-  user_input+=("${python_version}")
+  ignore="${SYSTEMD}/klipper-(${blacklist}).service"
+  match="${SYSTEMD}/klipper(-[0-9a-zA-Z]+)?.service"

-  ### return early if klipper already exists
-  if [[ -n ${klipper_initd_service} ]]; then
-    error="Unsupported Klipper SysVinit service detected:"
-    error="${error}\n ➔ ${klipper_initd_service}"
-    error="${error}\n Please re-install Klipper with KIAUH!"
-    log_info "Unsupported Klipper SysVinit service detected: ${klipper_initd_service}"
-  elif [[ -n ${klipper_systemd_services} ]]; then
-    error="At least one Klipper service is already installed:"
+  services=$(find "${SYSTEMD}" -maxdepth 1 -regextype awk ! -regex "${ignore}" -regex "${match}" | sort)
+  echo "${services}"
+}

-    for s in ${klipper_systemd_services}; do
-      log_info "Found Klipper service: ${s}"
-      error="${error}\n ➔ ${s}"
+function start_klipper_setup() {
+  local is_multi_instance_setup="false"
+  local adding_instances="false"
+  local use_custom_names="false"
+  local klipper_count=0
+
+  local klipper_instances
+  local python_version
+  local instance_count
+  local instance_names
+  local input
+  local regex
+  local blacklist
+
+  status_msg "Initializing Klipper installation ...\n"
+
+  klipper_instances=$(klipper_systemd)
+  [[ -n ${klipper_instances} ]] && is_multi_instance_setup="true"
+
+  if [[ ${is_multi_instance_setup} == "true" ]]; then
+    klipper_count=$(echo "${klipper_instances}" | wc -w)
+    python_version=$(get_klipper_python_ver)
+    adding_instances="true"
+
+    # print list of already installed instances
+    top_border
+    printf "|${green}%-55s${white}|\n" " ${klipper_count} Klipper instances are already installed!"
+    local klipper_folder
+    for s in ${klipper_instances}; do
+      klipper_folder="$(get_data_folder "$(basename "${s}")" klipper)"
+      printf "|${cyan}%-57s${white}|\n" " ● klipper-$(get_instance_name "${s}") - ${klipper_folder}"
    done
+    bottom_border && echo
+
+  else
+    top_border
+    echo -e "| Please select your preferred Python version.          | "
+    echo -e "| The recommended version is Python 3.x.                | "
+    hr
+    echo -e "|  1) [Python 3.x]  (recommended)                       | "
+    echo -e "|  2) [Python 2.7]  ${yellow}(legacy)${white}                            | "
+    back_footer
+    while true; do
+      read -p "${cyan}###### Select Python version:${white} " -e -i 1 input
+      case "${input}" in
+        1)
+          select_msg "Python 3.x\n"
+          python_version=3
+          break;;
+        2)
+          select_msg "Python 2.7\n"
+          python_version=2
+          break;;
+        B|b)
+          clear; install_menu; break;;
+        *)
+          error_msg "Invalid Input!\n";;
+      esac
+    done && input=""
  fi

-  [[ -n ${error} ]] && print_error "${error}" && return
-
-  ### ask for amount of instances to create
  top_border
  echo -e "| Please select the number of Klipper instances to set  |"
  echo -e "| up. The number of Klipper instances will determine    |"
@@ -52,113 +110,139 @@ function klipper_setup_dialog() {
  blank_line
  echo -e "| ${yellow}WARNING:${white}                                              |"
  echo -e "| ${yellow}Setting up too many instances may crash your system.${white}  |"
-  bottom_border
+  back_footer

-  ### ask for amount of instances
-  local klipper_count re="^[1-9][0-9]*$"
-  while [[ ! ${klipper_count} =~ ${re} ]]; do
-    read -p "${cyan}###### Number of Klipper instances to set up:${white} " -i "1" -e klipper_count
-    ### break if input is valid
-    [[ ${klipper_count} =~ ${re} ]] && break
-    ### error messages on invalid input
-    error_msg "Input not a number"
-  done && select_msg "${klipper_count}"
+  regex="^[1-9][0-9]*$"
+  while [[ ! ${input} =~ ${regex} ]]; do
+    local x=""
+    [[ ${adding_instances} == "true" ]] && x="additional"
+    read -p "${cyan}###### Number of ${x} Klipper instances to set up:${white} " -i "1" -e input

-  user_input+=("${klipper_count}")
+    if [[ ${input} =~ ${regex} ]]; then
+      instance_count="${input}"
+      (( instance_count > 1 )) && is_multi_instance_setup="true"
+      select_msg "Instance count: ${instance_count}\n"
+      break
+    elif [[ ${input} == "B" || ${input} == "b" ]]; then
+      install_menu
+    else
+      error_msg "Invalid Input!\n"
+    fi
+  done && input=""

-  ### confirm instance amount
-  local yn
-  while true; do
-    read -p "${cyan}###### Install ${klipper_count} instance(s)? (Y/n):${white} " yn
-    case "${yn}" in
-      Y|y|Yes|yes|"")
-        select_msg "Yes"
-        break;;
-      N|n|No|no)
-        select_msg "No"
-        abort_msg "Exiting Klipper setup ...\n"
-        return;;
-      *)
-        error_msg "Invalid Input!";;
-    esac
-  done
-
-  ### ask for custom names
-  if (( klipper_count > 1 )); then
-    local custom_names="false"
+  if [[ ${is_multi_instance_setup} == "true" ]]; then
    top_border
-    echo -e "| You can give each instance a custom name or skip.     |"
-    echo -e "| If skipped, KIAUH will automatically assign an index  |"
-    echo -e "| to each instance in ascending order, starting at '1'. |"
+    echo -e "| You can now give each instance a custom name. If you  |"
+    echo -e "| select 'N', each instance will get an index assigned  |"
+    echo -e "| in ascending order, starting at index '$((klipper_count + 1))'.            |"
    blank_line
-    echo -e "| Info:                                                 |"
-    echo -e "| Only alphanumeric characters will be allowed.         |"
-    bottom_border
+    echo -e "| ${yellow}Info:${white}                                                 |"
+    echo -e "| ${yellow}Only alphanumeric characters are allowed!${white}             |"
+    back_footer
    while true; do
-      read -p "${cyan}###### Use custom names? (y/N):${white} " yn
-      case "${yn}" in
+      read -p "${cyan}###### Assign custom names? (y/N):${white} " input
+      case "${input}" in
        Y|y|Yes|yes)
-          select_msg "Yes"
-          custom_names="true"
+          select_msg "Yes\n"
+          use_custom_names="true"
          break;;
        N|n|No|no|"")
-          select_msg "No"
+          select_msg "No\n"
          break;;
+        B|b)
+          clear; install_menu; break;;
        *)
-          error_msg "Invalid Input!";;
+          error_msg "Invalid Input!\n";;
      esac
-    done
-
-    ### get user input for custom names
-    if [[ ${custom_names} == "true" ]]; then
-      local i=1 name re="^[0-9a-zA-Z]+$"
-      while [[ ! ${name} =~ ${re} || ${i} -le ${klipper_count} ]]; do
-        read -p "${cyan}###### Name for instance #${i}:${white} " name
-        if [[ ${name} =~ ${re} ]]; then
-          select_msg "Name: ${name}"
-          user_input+=("${name}")
-          i=$(( i + 1 ))
-        else
-          error_msg "Invalid Input!"
-        fi
-      done
-    else
-      ### if no custom names are used, add the respective amount of indices to the user_input array
-      for (( i=1; i <= klipper_count; i++ )); do
-        user_input+=("${i}")
-      done
-    fi
+    done && input=""
+  else
+    instance_names+=("printer")
  fi

+  ### user selection for setting the actual custom names
+  shopt -s nocasematch
+  if [[ ${use_custom_names} == "true" ]]; then
+    regex="^[0-9a-zA-Z]+$"
+    blacklist="mcu"

-  (( klipper_count > 1 )) && status_msg "Installing ${klipper_count} Klipper instances ..."
-  (( klipper_count == 1 )) && status_msg "Installing single Klipper instance ..."
+    local i=1
+    while [[ ! ${input} =~ ${regex} || ${input} =~ ${blacklist} || ${i} -le ${instance_count} ]]; do
+      read -p "${cyan}###### Name for instance #$((klipper_count + i)):${white} " input

-  klipper_setup "${user_input[@]}"
+      if [[ ! ${input} =~ ${regex} ]]; then
+        error_msg "Invalid Input!\n"
+      elif [[ ${input} =~ ${blacklist} ]]; then
+        error_msg "Name not allowed! You are trying to use a reserved name.\n"
+      elif get_multi_instance_names | grep -q "${input}"; then
+        error_msg "Instance with name '${input}' already exists. Please choose a different name.\n"
+      elif echo "${instance_names[@]}" | grep -q "${input}"; then
+        error_msg "Name already assigned. Please choose a different name.\n"
+      elif [[ ${input} =~ ${regex} && ! ${input} =~ ${blacklist} ]]; then
+        select_msg "Name: ${input}\n"
+        local instance_name
+        if [[ ${input} =~ ^[0-9]+$ ]]; then
+          instance_name="printer_${input}"
+        else
+          instance_name="${input}"
+        fi
+        instance_names+=("${instance_name}")
+        i=$(( i + 1 ))
+      else
+        error_msg "Invalid Input!\n"
+      fi
+    done && input=""
+
+  elif [[ ${is_multi_instance_setup} == "true" && ${use_custom_names} == "false" ]]; then
+    for (( i=klipper_count+1; i <= instance_count+klipper_count; ++i )); do
+      instance_names+=("printer_${i}")
+    done
+  fi
+  shopt -u nocasematch
+
+  local msg="Installing Klipper ..."
+  if [[ ${is_multi_instance_setup} == "true" && ${adding_instances} == "false" ]]; then
+    msg="Installing ${instance_count} Klipper instances ..."
+  elif [[ ${adding_instances} == "true" ]]; then
+    msg="Installing ${instance_count} additional Klipper instances ..."
+  fi
+  status_msg "${msg}"
+
+  run_klipper_setup "${python_version}" "${adding_instances}" "${instance_names[@]}"
 }

-function klipper_setup() {
+function run_klipper_setup() {
  read_kiauh_ini "${FUNCNAME[0]}"
-  ### index 0: python version, index 1: instance count, index 2-n: instance names (optional)
-  local user_input=("${@}")
-  local python_version="${user_input[0]}" && unset "user_input[0]"
-  local instance_arr=("${user_input[@]}") && unset "user_input[@]"
-  local custom_repo="${custom_klipper_repo}"
-  local custom_branch="${custom_klipper_repo_branch}"
-  local dep=(git)
+
+  local python_version=${1}
+  local adding_instances=${2}
+  local instance_names
+  local confirm
+  local custom_repo
+  local custom_branch
+  local dep
+
+  shift 2 && read -r -a instance_names <<< "${@}"
+
+  custom_repo="${custom_klipper_repo}"
+  custom_branch="${custom_klipper_repo_branch}"
+  dep=(git)

  ### checking dependencies
  dependency_check "${dep[@]}"

-  ### step 1: clone klipper
-  clone_klipper "${custom_repo}" "${custom_branch}"
+  if [[ "${adding_instances}" == "false" ]]; then
+    ### step 1: clone klipper
+    clone_klipper "${custom_repo}" "${custom_branch}"

-  ### step 2: install klipper dependencies and create python virtualenv
-  install_klipper_packages "${python_version}"
-  create_klipper_virtualenv "${python_version}"
+    ### step 2: install klipper dependencies and create python virtualenv
+    install_klipper_packages "${python_version}"
+    create_klipper_virtualenv "${python_version}"
+  fi

-  ### step 3: configure and create klipper instances
-  configure_klipper_service "${instance_arr[@]}"
+  ### step 3: create klipper instances
+  for instance in "${instance_names[@]}"; do
+    create_klipper_service "${instance}"
+  done

  ### step 4: enable and start all instances
  do_action_service "enable" "klipper"
@@ -168,9 +252,11 @@ function klipper_setup() {
  check_usergroups

  ### confirm message
-  local confirm=""
-  (( instance_arr[0] == 1 )) && confirm="Klipper has been set up!"
-  (( instance_arr[0] > 1 )) && confirm="${instance_arr[0]} Klipper instances have been set up!"
+  (( ${#instance_names[@]} == 1 )) && confirm="Klipper has been set up!"
+  (( ${#instance_names[@]} > 1 )) && confirm="${#instance_names[@]} Klipper instances have been set up!"
+
+  ### finalizing the setup with writing instance names to the kiauh.ini
+  set_multi_instance_names

  print_confirm "${confirm}" && return
 }
@@ -201,37 +287,18 @@ function clone_klipper() {
 function create_klipper_virtualenv() {
  local python_version="${1}"

-  [[ ${python_version} == "python2" ]] && \
-  status_msg "Installing $(python2 -V) virtual environment..."
-
-  [[ ${python_version} == "python3" ]] && \
-  status_msg "Installing $(python3 -V) virtual environment..."
-
-  ### remove klippy-env if it already exists
  [[ -d ${KLIPPY_ENV} ]] && rm -rf "${KLIPPY_ENV}"

-  if [[ ${python_version} == "python2" ]]; then
-    if virtualenv -p python2 "${KLIPPY_ENV}"; then
-      "${KLIPPY_ENV}"/bin/pip install -r "${KLIPPER_DIR}"/scripts/klippy-requirements.txt
-    else
-      log_error "failure while creating python2 klippy-env"
-      error_msg "Creation of Klipper virtualenv failed!"
-      exit 1
-    fi
-  fi
+  status_msg "Installing $("python${python_version}" -V) virtual environment..."

-  if [[ ${python_version} == "python3" ]]; then
-    if virtualenv -p python3 "${KLIPPY_ENV}"; then
-      "${KLIPPY_ENV}"/bin/pip install -U pip
-      "${KLIPPY_ENV}"/bin/pip install -r "${KLIPPER_DIR}"/scripts/klippy-requirements.txt
-    else
-      log_error "failure while creating python3 klippy-env"
-      error_msg "Creation of Klipper virtualenv failed!"
-      exit 1
-    fi
+  if virtualenv -p "python${python_version}" "${KLIPPY_ENV}"; then
+    (( python_version == 3 )) && "${KLIPPY_ENV}"/bin/pip install -U pip
+    "${KLIPPY_ENV}"/bin/pip install -r "${KLIPPER_DIR}"/scripts/klippy-requirements.txt
+  else
+    log_error "failure while creating python3 klippy-env"
+    error_msg "Creation of Klipper virtualenv failed!"
+    exit 1
  fi
-
-  return
 }

 ###
@@ -252,10 +319,10 @@ function install_klipper_packages() {
  ### add dbus requirement for DietPi distro
  [[ -e "/boot/dietpi/.version" ]] && packages+=" dbus"

-  if [[ ${python_version} == "python3" ]]; then
+  if (( python_version == 3 )); then
    ### replace python-dev with python3-dev if python3 was selected
    packages="${packages//python-dev/python3-dev}"
-  elif [[ ${python_version} == "python2" ]]; then
+  elif (( python_version == 2 )); then
    ### package name 'python-dev' is deprecated (-> no installation candidate) on more modern linux distros
    packages="${packages//python-dev/python2-dev}"
  else
@@ -284,95 +351,68 @@ function install_klipper_packages() {
  fi
 }

-function configure_klipper_service() {
-  local input=("${@}")
-  local klipper_count=${input[0]} && unset "input[0]"
-  local names=("${input[@]}") && unset "input[@]"
-  local printer_data cfg_dir cfg log printer uds service env_file
+function create_klipper_service() {
+  local instance_name=${1}

-  if (( klipper_count == 1 )) && [[ ${#names[@]} -eq 0 ]]; then
-    printer_data="${HOME}/printer_data"
-    cfg_dir="${printer_data}/config"
-    cfg="${cfg_dir}/printer.cfg"
-    log="${printer_data}/logs/klippy.log"
-    printer="${printer_data}/comms/klippy.serial"
-    uds="${printer_data}/comms/klippy.sock"
-    service="${SYSTEMD}/klipper.service"
-    env_file="${printer_data}/systemd/klipper.env"
+  local printer_data
+  local cfg_dir
+  local cfg
+  local log
+  local klippy_serial
+  local klippy_socket
+  local env_file
+  local service
+  local service_template
+  local env_template
+  local suffix

-    ### create required folder structure
-    create_required_folders "${printer_data}"
-
-    ### write single instance service
-    write_klipper_service "" "${cfg}" "${log}" "${printer}" "${uds}" "${service}" "${env_file}"
-    write_example_printer_cfg "${cfg_dir}" "${cfg}"
-    ok_msg "Klipper instance created!"
-
-  elif (( klipper_count >= 1 )) && [[ ${#names[@]} -gt 0 ]]; then
-    local j=0 re="^[1-9][0-9]*$"
-
-    for (( i=1; i <= klipper_count; i++ )); do
-      ### overwrite config folder if name is only a number
-      if [[ ${names[j]} =~ ${re} ]]; then
-        printer_data="${HOME}/printer_${names[${j}]}_data"
-      else
-        printer_data="${HOME}/${names[${j}]}_data"
-      fi
-
-      cfg_dir="${printer_data}/config"
-      cfg="${cfg_dir}/printer.cfg"
-      log="${printer_data}/logs/klippy.log"
-      printer="${printer_data}/comms/klippy.serial"
-      uds="${printer_data}/comms/klippy.sock"
-      service="${SYSTEMD}/klipper-${names[${j}]}.service"
-      env_file="${printer_data}/systemd/klipper.env"
-
-      ### create required folder structure
-      create_required_folders "${printer_data}"
-
-      ### write multi instance service
-      write_klipper_service "${names[${j}]}" "${cfg}" "${log}" "${printer}" "${uds}" "${service}" "${env_file}"
-      write_example_printer_cfg "${cfg_dir}" "${cfg}"
-      ok_msg "Klipper instance 'klipper-${names[${j}]}' created!"
-      j=$(( j + 1 ))
-    done && unset j
+  printer_data="${HOME}/${instance_name}_data"
+  cfg_dir="${printer_data}/config"
+  cfg="${cfg_dir}/printer.cfg"
+  log="${printer_data}/logs/klippy.log"
+  klippy_serial="${printer_data}/comms/klippy.serial"
+  klippy_socket="${printer_data}/comms/klippy.sock"
+  env_file="${printer_data}/systemd/klipper.env"

+  if [[ ${instance_name} == "printer" ]]; then
+    suffix="${instance_name//printer/}"
  else
-    return 1
+    suffix="-${instance_name//printer_/}"
  fi
-}

-function write_klipper_service() {
-  local i=${1} cfg=${2} log=${3} printer=${4} uds=${5} service=${6} env_file=${7}
-  local service_template="${KIAUH_SRCDIR}/resources/klipper.service"
-  local env_template="${KIAUH_SRCDIR}/resources/klipper.env"
+  create_required_folders "${printer_data}"
+
+  service_template="${KIAUH_SRCDIR}/resources/klipper.service"
+  env_template="${KIAUH_SRCDIR}/resources/klipper.env"
+  service="${SYSTEMD}/klipper${suffix}.service"

-  ### replace all placeholders
  if [[ ! -f ${service} ]]; then
-    status_msg "Creating Klipper Service ${i} ..."
+    status_msg "Create Klipper service file ..."
+
    sudo cp "${service_template}" "${service}"
    sudo cp "${env_template}" "${env_file}"
-    [[ -z ${i} ]] && sudo sed -i "s| %INST%||" "${service}"
-    [[ -n ${i} ]] && sudo sed -i "s|%INST%|${i}|" "${service}"
    sudo sed -i "s|%USER%|${USER}|g; s|%ENV%|${KLIPPY_ENV}|; s|%ENV_FILE%|${env_file}|" "${service}"
-    sudo sed -i "s|%USER%|${USER}|; s|%LOG%|${log}|; s|%CFG%|${cfg}|; s|%PRINTER%|${printer}|; s|%UDS%|${uds}|" "${env_file}"
+    sudo sed -i "s|%USER%|${USER}|; s|%LOG%|${log}|; s|%CFG%|${cfg}|; s|%PRINTER%|${klippy_serial}|; s|%UDS%|${klippy_socket}|" "${env_file}"
+
+    ok_msg "Klipper service file created!"
+  fi
+
+  if [[ ! -f ${cfg} ]]; then
+    write_example_printer_cfg "${cfg}"
  fi
 }

 function write_example_printer_cfg() {
-  local cfg_dir=${1} cfg=${2}
-  local cfg_template="${KIAUH_SRCDIR}/resources/example.printer.cfg"
+  local cfg=${1}
+  local cfg_template

-  ### create a config directory if it doesn't exist
-  if [[ ! -d ${cfg_dir} ]]; then
-    status_msg "Creating '${cfg_dir}' ..."
-    mkdir -p "${cfg_dir}"
-  fi
+  cfg_template="${KIAUH_SRCDIR}/resources/example.printer.cfg"

-  ### create a minimal config if there is no printer.cfg
-  if [[ ! -f ${cfg} ]]; then
-    status_msg "Creating minimal example printer.cfg ..."
-    cp "${cfg_template}" "${cfg}"
+  status_msg "Creating minimal example printer.cfg ..."
+  if cp "${cfg_template}" "${cfg}"; then
+    ok_msg "Minimal example printer.cfg created!"
+  else
+    error_msg "Couldn't create minimal example printer.cfg!"
  fi
 }

@@ -380,110 +420,53 @@ function write_example_printer_cfg() {
 #================ REMOVE KLIPPER ================#
 #================================================#

-function remove_klipper_sysvinit() {
-  [[ ! -e "${INITD}/klipper" ]] && return
+function remove_klipper_service() {
+  status_msg "Removing Klipper services ..."

-  status_msg "Removing Klipper SysVinit service ..."
-  sudo systemctl stop klipper
-  sudo update-rc.d -f klipper remove
-  sudo rm -f "${INITD}/klipper" "${ETCDEF}/klipper"
-  ok_msg "Klipper SysVinit service removed!"
-}
-
-function remove_klipper_systemd() {
-  [[ -z $(find_klipper_systemd) ]] && return
-
-  status_msg "Removing Klipper Systemd Services ..."
-  for service in $(find_klipper_systemd | cut -d"/" -f5); do
+  for service in "${@}"; do
    status_msg "Removing ${service} ..."
    sudo systemctl stop "${service}"
    sudo systemctl disable "${service}"
    sudo rm -f "${SYSTEMD}/${service}"
-    ok_msg "Done!"
  done

-  ### reloading units
  sudo systemctl daemon-reload
  sudo systemctl reset-failed
-  ok_msg "Klipper Service removed!"
+
+  ok_msg "Selected Klipper services removed!"
 }

-function remove_klipper_env_file() {
-  local files regex="\/home\/${USER}\/([A-Za-z0-9_]+)\/systemd\/klipper\.env"
-  files=$(find "${HOME}" -maxdepth 3 -regextype posix-extended -regex "${regex}" | sort)
-
-  if [[ -n ${files} ]]; then
-    for file in ${files}; do
-      status_msg "Removing ${file} ..."
-      rm -f "${file}"
-      ok_msg "${file} removed!"
-    done
-  fi
-}
-
-function remove_klipper_logs() {
-  local files regex="\/home\/${USER}\/([A-Za-z0-9_]+)\/logs\/klippy\.log.*"
-  files=$(find "${HOME}" -maxdepth 3 -regextype posix-extended -regex "${regex}" | sort)
-
-  if [[ -n ${files} ]]; then
-    for file in ${files}; do
-      status_msg "Removing ${file} ..."
-      rm -f "${file}"
-      ok_msg "${file} removed!"
-    done
-  fi
-}
-
-function remove_legacy_klipper_logs() {
-  local files regex="klippy(-[0-9a-zA-Z]+)?\.log(.*)?"
-  files=$(find "${HOME}/klipper_logs" -maxdepth 1 -regextype posix-extended -regex "${HOME}/klipper_logs/${regex}" 2> /dev/null | sort)
-
-  if [[ -n ${files} ]]; then
-    for file in ${files}; do
-      status_msg "Removing ${file} ..."
-      rm -f "${file}"
-      ok_msg "${file} removed!"
-    done
-  fi
-}
-
-function remove_klipper_uds() {
-  local files regex="\/home\/${USER}\/([A-Za-z0-9_]+)\/comms\/klippy\.sock"
-  files=$(find "${HOME}" -maxdepth 3 -regextype posix-extended -regex "${regex}" | sort)
-
-  if [[ -n ${files} ]]; then
-    for file in ${files}; do
-      status_msg "Removing ${file} ..."
-      rm -f "${file}"
-      ok_msg "${file} removed!"
-    done
-  fi
-}
-
-function remove_klipper_printer() {
-  local files regex="\/home\/${USER}\/([A-Za-z0-9_]+)\/comms\/klippy\.serial"
-  files=$(find "${HOME}" -maxdepth 3 -regextype posix-extended -regex "${regex}" | sort)
-
-  if [[ -n ${files} ]]; then
-    for file in ${files}; do
-      status_msg "Removing ${file} ..."
-      rm -f "${file}"
-      ok_msg "${file} removed!"
-    done
-  fi
-}
-
-function remove_legacy_klipper_printer() {
+function find_instance_files() {
+  local data_folder=${1}
+  local target_folder=${2}
+  local target_name=${3}
  local files
-  files=$(find /tmp -maxdepth 1 -regextype posix-extended -regex "/tmp/printer(-[0-9a-zA-Z]+)?" | sort)

-  if [[ -n ${files} ]]; then
-    for file in ${files}; do
-      status_msg "Removing ${file} ..."
-      rm -f "${file}"
-      ok_msg "${file} removed!"
-    done
-  fi
+  readarray -t files < <(find "${HOME}" -regex "${data_folder}/${target_folder}/${target_name}" | sort)
+
+  echo -e "${files[@]}"
+}
+
+function find_legacy_klipper_logs() {
+  local files
+  local regex="klippy(-[0-9a-zA-Z]+)?\.log(.*)?"
+
+  readarray -t files < <(find "${HOME}/klipper_logs" -maxdepth 1 -regextype posix-extended -regex "${HOME}/klipper_logs/${regex}" 2> /dev/null | sort)
+  echo -e "${files[@]}"
+}
+
+function find_legacy_klipper_uds() {
+  local files
+
+  readarray -t files < <(find /tmp -maxdepth 1 -regextype posix-extended -regex "/tmp/klippy_uds(-[0-9a-zA-Z]+)?" | sort)
+  echo -e "${files[@]}"
+}
+
+function find_legacy_klipper_printer() {
+  local files
+
+  readarray -t files < <(find /tmp -maxdepth 1 -regextype posix-extended -regex "/tmp/printer(-[0-9a-zA-Z]+)?" | sort)
+  echo -e "${files[@]}"
 }

 function remove_klipper_dir() {
@@ -502,20 +485,108 @@ function remove_klipper_env() {
  ok_msg "Directory removed!"
 }

-function remove_klipper() {
-  remove_klipper_sysvinit
-  remove_klipper_systemd
-  remove_klipper_env_file
-  remove_klipper_logs
-  remove_legacy_klipper_logs
-  remove_klipper_uds
-  remove_klipper_printer
-  remove_legacy_klipper_printer
-  remove_klipper_dir
-  remove_klipper_env
+###
+# takes in a string of space separated absolute
+# filepaths and removes those files one after another
+#
+function remove_files() {
+  local files
+  read -r -a files <<< "${@}"

-  local confirm="Klipper was successfully removed!"
-  print_confirm "${confirm}" && return
+  if (( ${#files[@]} > 0 )); then
+    for file in "${files[@]}"; do
+      status_msg "Removing ${file} ..."
+      if rm -f "${file}"; then
+        ok_msg "${file} removed!"
+      else
+        error_msg "${file} could not be removed! Please remove it manually!"
+      fi
+    done
+  fi
+}
+
+function remove_klipper_files() {
+  status_msg "Removing Klipper files ..."
+
+  for service in "${@}"; do
+    local data_folder
+    data_folder=$(get_data_folder "${service}")
+    remove_files "$(find_instance_files "${data_folder}" "systemd" "klipper.env")"
+    remove_files "$(find_instance_files "${data_folder}" "logs" "klippy.log.*")"
+    remove_files "$(find_instance_files "${data_folder}" "comms" "klippy.sock")"
+    remove_files "$(find_instance_files "${data_folder}" "comms" "klippy.serial")"
+  done
+
+  ok_msg "Files removed!"
+}
+
+function remove_klipper() {
+  local klipper_systemd_services
+  local klipper_services_count
+  local user_input=()
+  local klipper_names=()
+  local service_name
+
+  klipper_systemd_services=$(klipper_systemd)
+  if [[ -z ${klipper_systemd_services} ]]; then
+    print_error "Klipper not installed, nothing to do!"
+    return
+  fi
+
+  remove_files "$(find_legacy_klipper_logs)"
+  remove_files "$(find_legacy_klipper_uds)"
+  remove_files "$(find_legacy_klipper_printer)"
+
+  top_border
+  echo -e "|     ${red}~~~~~~~~ [ Klipper instance remover ] ~~~~~~~${white}     |"
+  hr
+
+  klipper_services_count="$(echo "${klipper_systemd_services}" | wc -w)"
+  if (( klipper_services_count == 1 )); then
+    service_name=$(basename "${klipper_systemd_services}")
+    klipper_names+=( "${service_name}" )
+    printf "| 0) %-51s|\n" "${service_name}"
+  else
+    printf "| 0) %-51s|\n" "Remove all"
+    local i=1
+    for name in ${klipper_systemd_services}; do
+      service_name=$(basename "${name}")
+      klipper_names+=( "${service_name}" )
+      printf "| ${i}) %-51s|\n" "${service_name}"
+      i=$(( i + 1 ))
+    done
+  fi
+  back_footer
+
+  local option
+  while true; do
+    read -p "${cyan}Instance to remove:${white} " option
+    if [[ ${option} == "B" || ${option} == "b" ]]; then
+      return
+    elif [[ $((option)) != "${option}" ]]; then
+      error_msg "Invalid command!"
+    elif (( option >= 0 && option <= ${#klipper_names[@]} )); then
+      break
+    else
+      error_msg "Invalid command!"
+    fi
+  done
+
+  if (( option == 0 )); then
+    user_input=( "${klipper_names[@]}" )
+  else
+    user_input=( "${klipper_names[(( option - 1 ))]}" )
+  fi
+
+  remove_klipper_service "${user_input[@]}"
+  remove_klipper_files "${user_input[@]}"
+
+  if (( klipper_services_count == 1 )) || [[ "${option}" == "0" ]]; then
+    remove_klipper_dir
+    remove_klipper_env
+  fi
+
+  print_confirm "Klipper was successfully removed!" && return
 }

 #================================================#
@@ -533,7 +604,7 @@ function update_klipper() {
  local custom_repo="${custom_klipper_repo}"
  local custom_branch="${custom_klipper_repo_branch}"

-  py_ver="python$(get_klipper_python_ver)"
+  py_ver=$(get_klipper_python_ver)

  do_action_service "stop" "klipper"

@@ -560,13 +631,7 @@ function update_klipper() {

 function get_klipper_status() {
  local sf_count status py_ver
-  sf_count="$(find_klipper_systemd | wc -w)"
-
-  ### detect an existing "legacy" klipper init.d installation
-  if [[ $(find_klipper_systemd | wc -w) -eq 0 ]] \
-  && [[ $(find_klipper_initd | wc -w) -ge 1 ]]; then
-    sf_count=1
-  fi
+  sf_count="$(klipper_systemd | wc -w)"

  py_ver=$(get_klipper_python_ver)

--- a/scripts/klipperscreen.sh
+++ b/scripts/klipperscreen.sh
@@ -1,7 +1,7 @@
 #!/usr/bin/env bash

 #=======================================================================#
-# Copyright (C) 2020 - 2022 Dominik Willner <th33xitus@gmail.com>       #
+# Copyright (C) 2020 - 2023 Dominik Willner <th33xitus@gmail.com>       #
 #                                                                       #
 # This file is part of KIAUH - Klipper Installation And Update Helper   #
 # https://github.com/th33xitus/kiauh                                    #
@@ -207,7 +207,7 @@ function patch_klipperscreen_update_manager() {
  moonraker_configs=$(find "${KLIPPER_CONFIG}" -type f -name "moonraker.conf" | sort)

  for conf in ${moonraker_configs}; do
-    if ! grep -Eq "^\[update_manager KlipperScreen\]$" "${conf}"; then
+    if ! grep -Eq "^\[update_manager KlipperScreen\]\s*$" "${conf}"; then
      ### add new line to conf if it doesn't end with one
      [[ $(tail -c1 "${conf}" | wc -l) -eq 0 ]] && echo "" >> "${conf}"

--- a/scripts/mainsail.sh
+++ b/scripts/mainsail.sh
@@ -1,7 +1,7 @@
 #!/usr/bin/env bash

 #=======================================================================#
-# Copyright (C) 2020 - 2022 Dominik Willner <th33xitus@gmail.com>       #
+# Copyright (C) 2020 - 2023 Dominik Willner <th33xitus@gmail.com>       #
 #                                                                       #
 # This file is part of KIAUH - Klipper Installation And Update Helper   #
 # https://github.com/th33xitus/kiauh                                    #
@@ -30,7 +30,7 @@ function install_mainsail() {

  status_msg "Initializing Mainsail installation ..."
  ### first, we create a backup of the full klipper_config dir - safety first!
-  backup_klipper_config_dir
+  #backup_klipper_config_dir

  ### check for other enabled web interfaces
  unset SET_LISTEN_PORT
@@ -39,30 +39,6 @@ function install_mainsail() {
  ### check if another site already listens to port 80
  mainsail_port_check

-#  ### ask user to install mjpg-streamer
-#  local install_mjpg_streamer
-#  if [[ ! -f "${SYSTEMD}/webcamd.service" ]]; then
-#    while true; do
-#      echo
-#      top_border
-#      echo -e "| Install MJPG-Streamer for webcam support?             |"
-#      bottom_border
-#      read -p "${cyan}###### Please select (y/N):${white} " yn
-#      case "${yn}" in
-#        Y|y|Yes|yes)
-#          select_msg "Yes"
-#          install_mjpg_streamer="true"
-#          break;;
-#        N|n|No|no|"")
-#          select_msg "No"
-#          install_mjpg_streamer="false"
-#          break;;
-#        *)
-#          error_msg "Invalid command!";;
-#      esac
-#    done
-#  fi
-
  ### download mainsail
  download_mainsail

@@ -82,9 +58,6 @@ function install_mainsail() {
  ### add mainsail to the update manager in moonraker.conf
  patch_mainsail_update_manager

-  ### install mjpg-streamer
-#  [[ ${install_mjpg_streamer} == "true" ]] && install_mjpg-streamer
-
  fetch_webui_ports #WIP

  ### confirm message
@@ -92,22 +65,21 @@ function install_mainsail() {
 }

 function install_mainsail_macros() {
+  local yn
  while true; do
    echo
    top_border
-    echo -e "| It is recommended to have some important macros in    |"
-    echo -e "| your printer configuration to have Mainsail fully     |"
-    echo -e "| functional and working.                               |"
+    echo -e "| It is recommended to use special macros in order to   |"
+    echo -e "| have Mainsail fully functional and working.           |"
    blank_line
    echo -e "| The recommended macros for Mainsail can be seen here: |"
-    echo -e "| https://docs.mainsail.xyz/configuration#macros        |"
+    echo -e "| https://github.com/mainsail-crew/mainsail-config      |"
    blank_line
-    echo -e "| If you already have these macros in your config file, |"
-    echo -e "| skip this step and answer with 'no'.                  |"
+    echo -e "| If you already use these macros skip this step.       |"
    echo -e "| Otherwise you should consider to answer with 'yes' to |"
-    echo -e "| add the recommended example macros to your config.    |"
+    echo -e "| download the recommended macros.                      |"
    bottom_border
-    read -p "${cyan}###### Add the recommended macros? (Y/n):${white} " yn
+    read -p "${cyan}###### Download the recommended macros? (Y/n):${white} " yn
    case "${yn}" in
      Y|y|Yes|yes|"")
        select_msg "Yes"
@@ -124,36 +96,64 @@ function install_mainsail_macros() {
 }

 function download_mainsail_macros() {
-  local ms_cfg path configs regex
+  local ms_cfg_repo path configs regex line gcode_dir

-  ms_cfg="https://raw.githubusercontent.com/mainsail-crew/MainsailOS/master/src/modules/mainsail/filesystem/home/pi/klipper_config/mainsail.cfg"
-  regex="\/home\/${USER}\/([A-Za-z0-9_]+)\/config\/printer\.cfg"
+  ms_cfg_repo="https://github.com/mainsail-crew/mainsail-config.git"
+  regex="${HOME//\//\\/}\/([A-Za-z0-9_]+)\/config\/printer\.cfg"
  configs=$(find "${HOME}" -maxdepth 3 -regextype posix-extended -regex "${regex}" | sort)

-  if [[ -n ${configs} ]]; then
-    for config in ${configs}; do
-      path=$(echo "${config}" | rev | cut -d"/" -f2- | rev)
-      if [[ ! -f "${path}/mainsail.cfg" ]]; then
-        status_msg "Downloading mainsail.cfg to ${path} ..."
-        log_info "downloading mainsail.cfg to: ${path}"
-        wget "${ms_cfg}" -O "${path}/mainsail.cfg"
-
-        ### replace user 'pi' with current username to prevent issues in cases where the user is not called 'pi'
-        log_info "modify mainsail.cfg"
-        sed -i "/^path: \/home\/pi\/gcode_files/ s/\/home\/pi/\/home\/${USER}/" "${path}/mainsail.cfg"
-
-        ### write include to the very first line of the printer.cfg
-        if ! grep -Eq "^[include mainsail.cfg]$" "${path}/printer.cfg"; then
-          log_info "modify printer.cfg"
-          sed -i "1 i [include mainsail.cfg]" "${path}/printer.cfg"
-        fi
-        ok_msg "Done!"
-      fi
-    done
-  else
+  if [[ -z ${configs} ]]; then
+    print_error "No printer.cfg found! Installation of Macros will be skipped ..."
    log_error "execution stopped! reason: no printer.cfg found"
    return
  fi
+
+  status_msg "Cloning mainsail-config ..."
+  [[ -d "${HOME}/mainsail-config" ]] && rm -rf "${HOME}/mainsail-config"
+  if git clone "${ms_cfg_repo}" "${HOME}/mainsail-config"; then
+    for config in ${configs}; do
+      path=$(echo "${config}" | rev | cut -d"/" -f2- | rev)
+
+      if [[ -e "${path}/mainsail.cfg" && ! -h "${path}/mainsail.cfg" ]]; then
+        warn_msg "Attention! Existing mainsail.cfg detected!"
+        warn_msg "The file will be renamed to 'mainsail.bak.cfg' to be able to continue with the installation."
+        if ! mv "${path}/mainsail.cfg" "${path}/mainsail.bak.cfg"; then
+          error_msg "Renaming mainsail.cfg failed! Aborting installation ..."
+          return
+        fi
+      fi
+
+      if [[ -h "${path}/mainsail.cfg" ]]; then
+        warn_msg "Recreating symlink in ${path} ..."
+        rm -rf "${path}/mainsail.cfg"
+      fi
+
+      if ! ln -sf "${HOME}/mainsail-config/client.cfg" "${path}/mainsail.cfg"; then
+        error_msg "Creating symlink failed! Aborting installation ..."
+        return
+      fi
+
+      if ! grep -Eq "^\[include mainsail.cfg\]$" "${path}/printer.cfg"; then
+        log_info "${path}/printer.cfg"
+        sed -i "1 i [include mainsail.cfg]" "${path}/printer.cfg"
+      fi
+
+      line=$(($(grep -n "\[include mainsail.cfg\]" "${path}/printer.cfg" | tail -1 | cut -d: -f1) + 1))
+      gcode_dir=${path/config/gcodes}
+      if ! grep -Eq "^\[virtual_sdcard\]$" "${path}/printer.cfg"; then
+        log_info "${path}/printer.cfg"
+        sed -i "${line} i \[virtual_sdcard]\npath: ${gcode_dir}\non_error_gcode: CANCEL_PRINT\n" "${path}/printer.cfg"
+      fi
+    done
+  else
+    print_error "Cloning failed! Aborting installation ..."
+    log_error "execution stopped! reason: cloning failed"
+    return
+  fi
+
+  patch_mainsail_config_update_manager
+
+  ok_msg "Done!"
 }

 function download_mainsail() {
@@ -196,7 +196,7 @@ function remove_mainsail_dir() {
  rm -rf "${MAINSAIL_DIR}" && ok_msg "Directory removed!"
 }

-function remove_mainsail_config() {
+function remove_mainsail_nginx_config() {
  if [[ -e "/etc/nginx/sites-available/mainsail" ]]; then
    status_msg "Removing Mainsail configuration for Nginx ..."
    sudo rm "/etc/nginx/sites-available/mainsail" && ok_msg "File removed!"
@@ -223,7 +223,7 @@ function remove_mainsail_logs() {
 function remove_mainsail_log_symlinks() {
  local files regex

-  regex="\/home\/${USER}\/([A-Za-z0-9_]+)\/logs\/mainsail-.*"
+  regex="${HOME//\//\\/}\/([A-Za-z0-9_]+)\/logs\/mainsail-.*"
  files=$(find "${HOME}" -maxdepth 3 -regextype posix-extended -regex "${regex}" 2> /dev/null | sort)

  if [[ -n ${files} ]]; then
@@ -248,9 +248,18 @@ function remove_legacy_mainsail_log_symlinks() {
  fi
 }

+function remove_mainsail_config() {
+  if [[ -d "${HOME}/mainsail-config"  ]]; then
+    status_msg "Removing ${HOME}/mainsail-config ..."
+    rm -rf "${HOME}/mainsail-config"
+    ok_msg "${HOME}/mainsail-config removed!"
+    print_confirm "Mainsail-Config successfully removed!"
+  fi
+}
+
 function remove_mainsail() {
  remove_mainsail_dir
-  remove_mainsail_config
+  remove_mainsail_nginx_config
  remove_mainsail_logs
  remove_mainsail_log_symlinks
  remove_legacy_mainsail_log_symlinks
@@ -460,7 +469,7 @@ function ms_theme_install() {
 function ms_theme_delete() {
  local regex theme_folders target_folders=()

-  regex="\/home\/${USER}\/([A-Za-z0-9_]+)\/config\/\.theme"
+  regex="${HOME//\//\\/}\/([A-Za-z0-9_]+)\/config\/\.theme"
  theme_folders=$(find "${HOME}" -maxdepth 3 -type d -regextype posix-extended -regex "${regex}" | sort)
 #  theme_folders=$(find "${KLIPPER_CONFIG}" -mindepth 1 -type d -name ".theme" | sort)

@@ -502,8 +511,10 @@ function ms_theme_delete() {
 #================================================#

 function get_mainsail_download_url() {
-  local tags latest_tag latest_url stable_tag stable_url url
-  tags=$(curl -s "${MAINSAIL_TAGS}" | grep "name" | cut -d'"' -f4)
+  local ms_tags tags latest_tag latest_url stable_tag stable_url url
+
+  ms_tags="https://api.github.com/repos/mainsail-crew/mainsail/tags"
+  tags=$(curl -s "${ms_tags}" | grep "name" | cut -d'"' -f4)

  ### latest download url including pre-releases (alpha, beta, rc)
  latest_tag=$(echo "${tags}" | head -1)
@@ -592,12 +603,12 @@ function enable_mainsail_remotemode() {

 function patch_mainsail_update_manager() {
  local patched moonraker_configs regex
-  regex="\/home\/${USER}\/([A-Za-z0-9_]+)\/config\/moonraker\.conf"
+  regex="${HOME//\//\\/}\/([A-Za-z0-9_]+)\/config\/moonraker\.conf"
  moonraker_configs=$(find "${HOME}" -maxdepth 3 -type f -regextype posix-extended -regex "${regex}" | sort)

  patched="false"
  for conf in ${moonraker_configs}; do
-    if ! grep -Eq "^\[update_manager mainsail\]$" "${conf}"; then
+    if ! grep -Eq "^\[update_manager mainsail\]\s*$" "${conf}"; then
      ### add new line to conf if it doesn't end with one
      [[ $(tail -c1 "${conf}" | wc -l) -eq 0 ]] && echo "" >> "${conf}"

@@ -621,3 +632,36 @@ MOONRAKER_CONF
    do_action_service "restart" "moonraker"
  fi
 }
+
+function patch_mainsail_config_update_manager() {
+  local patched moonraker_configs regex
+  regex="${HOME//\//\\/}\/([A-Za-z0-9_]+)\/config\/moonraker\.conf"
+  moonraker_configs=$(find "${HOME}" -maxdepth 3 -type f -regextype posix-extended -regex "${regex}" | sort)
+
+  patched="false"
+  for conf in ${moonraker_configs}; do
+    if ! grep -Eq "^\[update_manager mainsail-config\]\s*$" "${conf}"; then
+      ### add new line to conf if it doesn't end with one
+      [[ $(tail -c1 "${conf}" | wc -l) -eq 0 ]] && echo "" >> "${conf}"
+
+      ### add Mainsails update manager section to moonraker.conf
+      status_msg "Adding Mainsail-Config to update manager in file:\n       ${conf}"
+      /bin/sh -c "cat >> ${conf}" << MOONRAKER_CONF
+
+[update_manager mainsail-config]
+type: git_repo
+primary_branch: master
+path: ~/mainsail-config
+origin: https://github.com/mainsail-crew/mainsail-config.git
+managed_services: klipper
+MOONRAKER_CONF
+
+    fi
+
+    patched="true"
+  done
+
+  if [[ ${patched} == "true" ]]; then
+    do_action_service "restart" "moonraker"
+  fi
+}
--- a/scripts/mjpg-streamer.sh
+++ b/scripts/mjpg-streamer.sh
@@ -1,7 +1,7 @@
 #!/usr/bin/env bash

 #=======================================================================#
-# Copyright (C) 2020 - 2022 Dominik Willner <th33xitus@gmail.com>       #
+# Copyright (C) 2020 - 2023 Dominik Willner <th33xitus@gmail.com>       #
 #                                                                       #
 # This file is part of KIAUH - Klipper Installation And Update Helper   #
 # https://github.com/th33xitus/kiauh                                    #
--- a/scripts/moonraker-telegram-bot.sh
+++ b/scripts/moonraker-telegram-bot.sh
@@ -1,7 +1,7 @@
 #!/usr/bin/env bash

 #=======================================================================#
-# Copyright (C) 2020 - 2022 Dominik Willner <th33xitus@gmail.com>       #
+# Copyright (C) 2020 - 2023 Dominik Willner <th33xitus@gmail.com>       #
 #                                                                       #
 # This file is part of KIAUH - Klipper Installation And Update Helper   #
 # https://github.com/th33xitus/kiauh                                    #
@@ -203,29 +203,40 @@ function create_telegram_conf() {
  local input=("${@}")
  local telegram_bot_count=${input[0]} && unset "input[0]"
  local names=("${input[@]}") && unset "input[@]"
-  local log="${KLIPPER_LOGS}"
-  local cfg cfg_dir
+  local printer_data log_dir cfg cfg_dir

  if (( telegram_bot_count == 1 )); then
-    cfg_dir="${KLIPPER_CONFIG}"
+    printer_data="${HOME}/printer_data"
+    log_dir="${printer_data}/logs"
+    cfg_dir="${printer_data}/config"
    cfg="${cfg_dir}/telegram.conf"
+
+    ### create required folder structure
+    create_required_folders "${printer_data}"
+
    ### write single instance config
-    write_telegram_conf "${cfg_dir}" "${cfg}" "${log}"
+    write_telegram_conf "${cfg_dir}" "${cfg}"

  elif (( telegram_bot_count > 1 )); then
    local j=0 re="^[1-9][0-9]*$"

    for (( i=1; i <= telegram_bot_count; i++ )); do
-      ### overwrite config folder if name is only a number
-      if [[ ${names[j]} =~ ${re} ]]; then
-        cfg_dir="${KLIPPER_CONFIG}/printer_${names[${j}]}"
-      else
-        cfg_dir="${KLIPPER_CONFIG}/${names[${j}]}"
-      fi
+
+      printer_data="${HOME}/${names[${j}]}_data"
+      ### prefix instance name with "printer_" if it is only a number
+      [[ ${names[j]} =~ ${re} ]] && printer_data="${HOME}/printer_${names[${j}]}_data"
+
+
+      cfg_dir="${printer_data}/config"
      cfg="${cfg_dir}/telegram.conf"
+      log_dir="${printer_data}/logs"
+
+      ### create required folder structure
+      create_required_folders "${printer_data}"

      ### write multi instance config
-      write_telegram_conf "${cfg_dir}" "${cfg}" "${log}"
+      write_telegram_conf "${cfg_dir}" "${cfg}"
+
      j=$(( j + 1 ))
    done && unset j

@@ -235,17 +246,15 @@ function create_telegram_conf() {
 }

 function write_telegram_conf() {
-  local cfg_dir=${1} cfg=${2} log=${3}
+  local cfg_dir=${1} cfg=${2}
  local conf_template="${TELEGRAM_BOT_DIR}/scripts/base_install_template"
-  [[ ! -d ${cfg_dir} ]] && mkdir -p "${cfg_dir}"

  if [[ ! -f ${cfg} ]]; then
    status_msg "Creating telegram.conf in ${cfg_dir} ..."
    cp "${conf_template}" "${cfg}"
-    sed -i "s|some_log_path|${log}|g" "${cfg}"
    ok_msg "telegram.conf created!"
  else
-    status_msg "File '${cfg}' already exists!\nSkipping..."
+    ok_msg "File '${cfg}' already exists! Skipping..."
  fi
 }

@@ -253,16 +262,22 @@ function create_telegram_bot_service() {
  local input=("${@}")
  local instances=${input[0]} && unset "input[0]"
  local names=("${input[@]}") && unset "input[@]"
-  local cfg_dir cfg log service
+  local printer_data cfg_dir cfg log service env_file

  if (( instances == 1 )); then
-    cfg_dir="${KLIPPER_CONFIG}"
+    printer_data="${HOME}/printer_data"
+    cfg_dir="${printer_data}/config"
    cfg="${cfg_dir}/telegram.conf"
-    log="${KLIPPER_LOGS}/telegram.log"
+    log="${printer_data}/logs/telegram.log"
    service="${SYSTEMD}/moonraker-telegram-bot.service"
+    env_file="${printer_data}/systemd/moonraker-telegram-bot.env"
+
+    ### create required folder structure
+    create_required_folders "${printer_data}"
+
    ### write single instance service
-    write_telegram_bot_service "" "${cfg}" "${log}" "${service}"
-    ok_msg "Single Telegram Bot instance created!"
+    write_telegram_bot_service "" "${cfg}" "${log}" "${service}" "${env_file}"
+    ok_msg "Telegram Bot instance created!"

  elif (( instances > 1 )); then
    local j=0 re="^[1-9][0-9]*$"
@@ -270,17 +285,27 @@ function create_telegram_bot_service() {
    for (( i=1; i <= instances; i++ )); do
      ### overwrite config folder if name is only a number
      if [[ ${names[j]} =~ ${re} ]]; then
-        cfg_dir="${KLIPPER_CONFIG}/printer_${names[${j}]}"
+        printer_data="${HOME}/printer_${names[${j}]}_data"
      else
-        cfg_dir="${KLIPPER_CONFIG}/${names[${j}]}"
+        printer_data="${HOME}/${names[${j}]}_data"
      fi

+      cfg_dir="${printer_data}/config"
      cfg="${cfg_dir}/telegram.conf"
-      log="${KLIPPER_LOGS}/telegram-${names[${j}]}.log"
+      log="${printer_data}/logs/telegram.log"
      service="${SYSTEMD}/moonraker-telegram-bot-${names[${j}]}.service"
+      env_file="${printer_data}/systemd/moonraker-telegram-bot.env"
+
+      ### create required folder structure
+      create_required_folders "${printer_data}"
+
      ### write multi instance service
-      write_telegram_bot_service "${names[${j}]}" "${cfg}" "${log}" "${service}"
-      ok_msg "Telegram Bot instance moonraker-telegram-bot-${names[${j}]} created!"
+      if write_telegram_bot_service "${names[${j}]}" "${cfg}" "${log}" "${service}" "${env_file}"; then
+        ok_msg "Telegram Bot instance moonraker-telegram-bot-${names[${j}]} created!"
+      else
+        error_msg "An error occured during creation of instance moonraker-telegram-bot-${names[${j}]}!"
+      fi
+
      j=$(( j + 1 ))
    done && unset j

@@ -290,17 +315,24 @@ function create_telegram_bot_service() {
 }

 function write_telegram_bot_service() {
-  local i=${1} cfg=${2} log=${3} service=${4}
+  local i=${1} cfg=${2} log=${3} service=${4} env_file=${5}
  local service_template="${KIAUH_SRCDIR}/resources/moonraker-telegram-bot.service"
+  local env_template="${KIAUH_SRCDIR}/resources/moonraker-telegram-bot.env"

  ### replace all placeholders
  if [[ ! -f ${service} ]]; then
-    status_msg "Creating Telegram Bot Service ${i} ..."
+    status_msg "Creating service file for instance ${i} ..."
    sudo cp "${service_template}" "${service}"
-    [[ -z ${i} ]] && sudo sed -i "s|instance %INST% ||" "${service}"
-    [[ -n ${i} ]] && sudo sed -i "s|%INST%|${i}|" "${service}"
-    sudo sed -i "s|%USER%|${USER}|; s|%ENV%|${TELEGRAM_BOT_ENV}|; s|%DIR%|${TELEGRAM_BOT_DIR}|" "${service}"
-    sudo sed -i "s|%CFG%|${cfg}|; s|%LOG%|${log}|" "${service}"
+    if [[ -z ${i} ]]; then
+      sudo sed -i "s| %INST%||" "${service}"
+    else
+      sudo sed -i "s|%INST%|${i}|" "${service}"
+    fi
+    sudo sed -i "s|%USER%|${USER}|g; s|%ENV%|${TELEGRAM_BOT_ENV}|; s|%ENV_FILE%|${env_file}|" "${service}"
+
+    status_msg "Creating environment file for instance ${i} ..."
+    cp "${env_template}" "${env_file}"
+    sed -i "s|%USER%|${USER}|; s|%CFG%|${cfg}|; s|%LOG%|${log}|" "${env_file}"
  fi
 }

@@ -343,9 +375,35 @@ function remove_telegram_bot_env() {
  ok_msg "Directory removed!"
 }

+function remove_telegram_bot_env_file() {
+  local files regex="${HOME//\//\\/}\/([A-Za-z0-9_]+)\/systemd\/moonraker-telegram-bot\.env"
+  files=$(find "${HOME}" -maxdepth 3 -regextype posix-extended -regex "${regex}" | sort)
+
+  if [[ -n ${files} ]]; then
+    for file in ${files}; do
+      status_msg "Removing ${file} ..."
+      rm -f "${file}"
+      ok_msg "${file} removed!"
+    done
+  fi
+}
+
 function remove_telegram_bot_logs() {
+  local files regex="${HOME//\//\\/}\/([A-Za-z0-9_]+)\/logs\/telegram\.log.*"
+  files=$(find "${HOME}" -maxdepth 3 -regextype posix-extended -regex "${regex}" | sort)
+
+  if [[ -n ${files} ]]; then
+    for file in ${files}; do
+      status_msg "Removing ${file} ..."
+      rm -f "${file}"
+      ok_msg "${file} removed!"
+    done
+  fi
+}
+
+function remove_legacy_telegram_bot_logs() {
  local files regex="telegram(-[0-9a-zA-Z]+)?\.log(.*)?"
-  files=$(find "${KLIPPER_LOGS}" -maxdepth 1 -regextype posix-extended -regex "${KLIPPER_LOGS}/${regex}" | sort)
+  files=$(find "${HOME}/klipper_logs" -maxdepth 1 -regextype posix-extended -regex "${HOME}/klipper_logs/${regex}" 2> /dev/null | sort)

  if [[ -n ${files} ]]; then
    for file in ${files}; do
@@ -360,7 +418,9 @@ function remove_telegram_bot() {
  remove_telegram_bot_systemd
  remove_telegram_bot_dir
  remove_telegram_bot_env
+  remove_telegram_bot_env_file
  remove_telegram_bot_logs
+  remove_legacy_telegram_bot_logs

  local confirm="Moonraker-Telegram-Bot was successfully removed!"
  print_confirm "${confirm}" && return
@@ -458,12 +518,13 @@ function compare_telegram_bot_versions() {
 #================================================#

 function patch_telegram_bot_update_manager() {
-  local patched="false"
-  local moonraker_configs
-  moonraker_configs=$(find "${KLIPPER_CONFIG}" -type f -name "moonraker.conf" | sort)
+  local patched moonraker_configs regex
+  regex="${HOME//\//\\/}\/([A-Za-z0-9_]+)\/config\/moonraker\.conf"
+  moonraker_configs=$(find "${HOME}" -maxdepth 3 -type f -regextype posix-extended -regex "${regex}" | sort)

+  patched="false"
  for conf in ${moonraker_configs}; do
-    if ! grep -Eq "^\[update_manager moonraker-telegram-bot\]$" "${conf}"; then
+    if ! grep -Eq "^\[update_manager moonraker-telegram-bot\]\s*$" "${conf}"; then
      ### add new line to conf if it doesn't end with one
      [[ $(tail -c1 "${conf}" | wc -l) -eq 0 ]] && echo "" >> "${conf}"

--- a/scripts/moonraker.sh
+++ b/scripts/moonraker.sh
@@ -1,7 +1,7 @@
 #!/usr/bin/env bash

 #=======================================================================#
-# Copyright (C) 2020 - 2022 Dominik Willner <th33xitus@gmail.com>       #
+# Copyright (C) 2020 - 2023 Dominik Willner <th33xitus@gmail.com>       #
 #                                                                       #
 # This file is part of KIAUH - Klipper Installation And Update Helper   #
 # https://github.com/th33xitus/kiauh                                    #
@@ -37,8 +37,6 @@ function moonraker_systemd() {
 }

 function moonraker_setup_dialog() {
-  status_msg "Initializing Moonraker installation ..."
-
  ### return early if python version check fails
  if [[ $(python3_check) == "false" ]]; then
    local error="Versioncheck failed! Python 3.7 or newer required!\n"
@@ -46,97 +44,85 @@ function moonraker_setup_dialog() {
    print_error "${error}" && return
  fi

-  ### return early if moonraker already exists
-  local moonraker_services
-  moonraker_services=$(moonraker_systemd)
-  if [[ -n ${moonraker_services} ]]; then
-    local error="At least one Moonraker service is already installed:"
-    for s in ${moonraker_services}; do
-      log_info "Found Moonraker service: ${s}"
-      error="${error}\n ➔ ${s}"
-    done
-    print_error "${error}" && return
-  fi
+  local klipper_services=$(klipper_systemd)
+  local klipper_count=$(echo "${klipper_services}" | wc -w )
+  for service in ${klipper_services}; do
+    klipper_names+=( "$(get_instance_name "${service}")" )
+  done
+
+  local moonraker_services=$(moonraker_systemd)
+  local moonraker_count=$(echo "${moonraker_services}" | wc -w )
+  for service in ${moonraker_services}; do
+    moonraker_names+=( "$(get_instance_name "${service}")" )
+  done

  ### return early if klipper is not installed
-  local klipper_services
-  klipper_services=$(find_klipper_systemd)
  if [[ -z ${klipper_services} ]]; then
    local error="Klipper not installed! Please install Klipper first!"
    log_error "Moonraker setup started without Klipper being installed. Aborting setup."
    print_error "${error}" && return
  fi

-  local klipper_count user_input=() klipper_names=()
-  klipper_count=$(echo "${klipper_services}" | wc -w )
-  for service in ${klipper_services}; do
-    klipper_names+=( "$(get_instance_name "${service}")" )
+  top_border
+  echo -e "|     ${red}~~~~~~~~~ [ Moonraker installation ] ~~~~~~~~${white}     |"
+  hr
+
+  printf "|${green}%-55s${white}|\n" " ${moonraker_count} Moonraker services found!"
+  local moonraker_folders=()
+  for name in ${moonraker_services}; do
+    local moonraker_folder=$(get_data_folder $(basename ${name}) moonraker)
+    printf "|${cyan}%-57s${white}|\n" " ● $(basename ${name}) - $(get_moonraker_address $(basename ${name}))"
+    moonraker_folders+=( "${moonraker_folder}" )
  done
+  blank_line
+  printf "|${green}%-55s${white}|\n" " ${klipper_count} Klipper services found!"
+  local klipper_available=()
+  for name in ${klipper_services}; do
+    local klipper_folder=$(get_data_folder $(basename ${name}) klipper)
+    printf "|${cyan}%-57s${white}|\n" " ● $(basename ${name}) - ${klipper_folder}"
+    if [[ ! " ${moonraker_folders[*]} " =~ " ${klipper_folder} " ]]; then
+      klipper_available+=( "$(basename ${name})" )
+    fi
+  done
+  local klipper_available_count=${#klipper_available[@]}
+  hr

-  local moonraker_count
-  if (( klipper_count == 1 )); then
-    ok_msg "Klipper installation found!\n"
-    moonraker_count=1
-  elif (( klipper_count > 1 )); then
-    top_border
-    printf "|${green}%-55s${white}|\n" " ${klipper_count} Klipper instances found!"
-    for name in "${klipper_names[@]}"; do
-      printf "|${cyan}%-57s${white}|\n" " ● klipper-${name}"
-    done
-    blank_line
-    echo -e "| The setup will apply the same names to Moonraker!     |"
-    blank_line
-    echo -e "| Please select the number of Moonraker instances to    |"
-    echo -e "| install. Usually one Moonraker instance per Klipper   |"
-    echo -e "| instance is required, but you may not install more    |"
-    echo -e "| Moonraker instances than available Klipper instances. |"
-    bottom_border
-
-    ### ask for amount of instances
-    local re="^[1-9][0-9]*$"
-    while [[ ! ${moonraker_count} =~ ${re} || ${moonraker_count} -gt ${klipper_count} ]]; do
-      read -p "${cyan}###### Number of Moonraker instances to set up:${white} " -i "${klipper_count}" -e moonraker_count
-      ### break if input is valid
-      [[ ${moonraker_count} =~ ${re} && ${moonraker_count} -le ${klipper_count} ]] && break
-      ### conditional error messages
-      [[ ! ${moonraker_count} =~ ${re} ]] && error_msg "Input not a number"
-      (( moonraker_count > klipper_count )) && error_msg "Number of Moonraker instances larger than installed Klipper instances"
-    done && select_msg "${moonraker_count}"
+  printf "|${green}%-55s${white}|\n" " ${klipper_available_count} Moonraker services can be installed:"
+  local service_name
+  if (( klipper_available_count == 1 )); then
+    service_name=$(basename "${klipper_available[@]}")
+    printf "| 0) %-51s|\n" "${service_name}"
  else
-    log_error "Internal error. klipper_count of '${klipper_count}' not equal or grather than one!"
-    return 1
-  fi
-
-  user_input+=("${moonraker_count}")
-
-  ### confirm instance amount
-  local yn
-  while true; do
-    (( moonraker_count == 1 )) && local question="Install Moonraker?"
-    (( moonraker_count > 1 )) && local question="Install ${moonraker_count} Moonraker instances?"
-    read -p "${cyan}###### ${question} (Y/n):${white} " yn
-    case "${yn}" in
-      Y|y|Yes|yes|"")
-        select_msg "Yes"
-        break;;
-      N|n|No|no)
-        select_msg "No"
-        abort_msg "Exiting Moonraker setup ...\n"
-        return;;
-      *)
-        error_msg "Invalid Input!";;
-    esac
-  done
-
-  ### write existing klipper names into user_input array to use them as names for moonraker
-  if (( klipper_count > 1 )); then
-    for name in "${klipper_names[@]}"; do
-      user_input+=("${name}")
+    printf "| 0) %-51s|\n" "Install all"
+    local i=1
+    for name in "${klipper_available[@]}"; do
+      printf "| ${i}) %-51s|\n" "${name}"
+      (( i=i+1 ))
    done
  fi
+  back_footer

-  (( moonraker_count > 1 )) && status_msg "Installing ${moonraker_count} Moonraker instances ..."
-  (( moonraker_count == 1 )) && status_msg "Installing Moonraker ..."
+  local option
+  while true; do
+    read -p "${cyan}Install moonraker for:${white} " option
+    if [[ ${option} == "B" || ${option} == "b" ]]; then
+      return
+    elif [[ $((option)) != $option ]]; then
+      error_msg "Invalid command!"
+    elif (( option >= 0 && option < ${#klipper_available[@]} )); then
+      break
+    else
+      error_msg "Invalid command!"
+    fi
+  done
+
+  if (( option == 0 )); then
+    user_input=( ${klipper_available[@]} )
+  else
+    user_input=( "${klipper_available[(( option-1 ))]}" )
+  fi
+
+  status_msg "Installing Moonraker ..."
  moonraker_setup "${user_input[@]}"
 }

@@ -199,7 +185,10 @@ function moonraker_setup() {
  ### step 2: install moonraker dependencies and create python virtualenv
  status_msg "Installing dependencies ..."
  install_moonraker_dependencies
-  create_moonraker_virtualenv
+  if [[ "${moonraker_clone_result}" == "0" ]]; then
+    create_moonraker_virtualenv
+  fi
+  unset moonraker_clone_result

  ### step 3: create moonraker.conf
  create_moonraker_conf "${instance_arr[@]}"
@@ -216,9 +205,10 @@ function moonraker_setup() {

  ### confirm message
  local confirm=""
-  (( instance_arr[0] == 1 )) && confirm="Moonraker has been set up!"
-  (( instance_arr[0] > 1 )) && confirm="${instance_arr[0]} Moonraker instances have been set up!"
-  print_confirm "${confirm}" && print_mr_ip_list "${instance_arr[0]}" && return
+  (( ${#instance_arr[@]} == 1 )) && confirm="Moonraker has been set up!"
+  (( ${#instance_arr[@]} > 1 )) && confirm="${#instance_arr[@]} Moonraker instances have been set up!"
+  print_confirm "${confirm}"
+  print_moonraker_addresses
 }

 function clone_moonraker() {
@@ -226,6 +216,15 @@ function clone_moonraker() {

  status_msg "Cloning Moonraker from ${repo} ..."

+  if [[ -d ${MOONRAKER_DIR} ]]
+  then
+    status_msg "Moonraker already cloned, pulling recent changes ..."
+    git -C ${MOONRAKER_DIR} stash
+    git -C ${MOONRAKER_DIR} pull --ff-only
+    moonraker_clone_result="1"
+    return
+  fi
+
  ### force remove existing moonraker dir and clone into fresh moonraker dir
  [[ -d ${MOONRAKER_DIR} ]] && rm -rf "${MOONRAKER_DIR}"

@@ -234,50 +233,29 @@ function clone_moonraker() {
    print_error "Cloning Moonraker from\n ${repo}\n failed!"
    exit 1
  fi
+  moonraker_clone_result="0"
 }

 function create_moonraker_conf() {
-  local input=("${@}")
-  local moonraker_count=${input[0]} && unset "input[0]"
-  local names=("${input[@]}") && unset "input[@]"
-  local port lan printer_data cfg_dir cfg uds
+  local names=("${@}")
+  local moonraker_count=${#names[@]}
+  local lan printer_data cfg_dir cfg uds
+  local port=$(get_moonraker_next_port)

-  port=7125
  lan="$(hostname -I | cut -d" " -f1 | cut -d"." -f1-2).0.0/16"

-  if (( moonraker_count == 1 )); then
-    printer_data="${HOME}/printer_data"
+  for service in "${names[@]}"; do
+    ### overwrite config folder if name is only a number
+    printer_data=$(get_data_folder "${service}" "klipper")
+
    cfg_dir="${printer_data}/config"
    cfg="${cfg_dir}/moonraker.conf"
    uds="${printer_data}/comms/klippy.sock"

-    ### write single instance config
+    ### write multi instance config
    write_moonraker_conf "${cfg_dir}" "${cfg}" "${port}" "${uds}" "${lan}"
-
-  elif (( moonraker_count > 1 )); then
-    local j=0 re="^[1-9][0-9]*$"
-
-    for (( i=1; i <= moonraker_count; i++ )); do
-      ### overwrite config folder if name is only a number
-      if [[ ${names[j]} =~ ${re} ]]; then
-        printer_data="${HOME}/printer_${names[${j}]}_data"
-      else
-        printer_data="${HOME}/${names[${j}]}_data"
-      fi
-
-      cfg_dir="${printer_data}/config"
-      cfg="${cfg_dir}/moonraker.conf"
-      uds="${printer_data}/comms/klippy.sock"
-
-      ### write multi instance config
-      write_moonraker_conf "${cfg_dir}" "${cfg}" "${port}" "${uds}" "${lan}"
-      port=$(( port + 1 ))
-      j=$(( j + 1 ))
-    done && unset j
-
-  else
-    return 1
-  fi
+    (( port=port+1 ))
+  done && unset j
 }

 function write_moonraker_conf() {
@@ -304,56 +282,29 @@ function write_moonraker_conf() {
 }

 function configure_moonraker_service() {
-  local input=("${@}")
-  local moonraker_count=${input[0]} && unset "input[0]"
-  local names=("${input[@]}") && unset "input[@]"
-  local printer_data cfg_dir service env_file
+  local names=("${@}")
+  local moonraker_count=${#names[@]}
+  local printer_data cfg_dir service env_file service_name
+
+  for service in "${names[@]}"; do
+    printer_data=$(get_data_folder "${service}" "klipper")

-  if (( moonraker_count == 1 )) && [[ ${#names[@]} -eq 0 ]]; then
-    i=""
-    printer_data="${HOME}/printer_data"
    cfg_dir="${printer_data}/config"
-    service="${SYSTEMD}/moonraker.service"
+    service_name="${service/"klipper"/"moonraker"}" 
+    service="${SYSTEMD}/${service_name}"
    env_file="${printer_data}/systemd/moonraker.env"

    ### create required folder structure
    create_required_folders "${printer_data}"

-    ### write single instance service
-    write_moonraker_service "" "${printer_data}" "${service}" "${env_file}"
-    ok_msg "Moonraker instance created!"
+    ### write multi instance service
+    write_moonraker_service "${service_name}" "${printer_data}" "${service}" "${env_file}"
+    ok_msg "Moonraker instance '${service_name}' created!"
+  done && unset i

-  elif (( moonraker_count > 1 )) && [[ ${#names[@]} -gt 0 ]]; then
-    local j=0 re="^[1-9][0-9]*$"
-
-    for (( i=1; i <= moonraker_count; i++ )); do
-      ### overwrite config folder if name is only a number
-      if [[ ${names[j]} =~ ${re} ]]; then
-        printer_data="${HOME}/printer_${names[${j}]}_data"
-      else
-        printer_data="${HOME}/${names[${j}]}_data"
-      fi
-
-      cfg_dir="${printer_data}/config"
-      service="${SYSTEMD}/moonraker-${names[${j}]}.service"
-      env_file="${printer_data}/systemd/moonraker.env"
-
-      ### create required folder structure
-      create_required_folders "${printer_data}"
-
-      ### write multi instance service
-      write_moonraker_service "${names[${j}]}" "${printer_data}" "${service}" "${env_file}"
-      ok_msg "Moonraker instance 'moonraker-${names[${j}]}' created!"
-      j=$(( j + 1 ))
-    done && unset i
-
-    ### enable mainsails remoteMode if mainsail is found
-    if [[ -d ${MAINSAIL_DIR} ]]; then
-      enable_mainsail_remotemode
-    fi
-
-  else
-    return 1
+  ### enable mainsails remoteMode if mainsail is found
+  if [[ -d ${MAINSAIL_DIR} ]]; then
+    enable_mainsail_remotemode
  fi
 }

@@ -361,6 +312,7 @@ function write_moonraker_service() {
  local i=${1} printer_data=${2} service=${3} env_file=${4}
  local service_template="${KIAUH_SRCDIR}/resources/moonraker.service"
  local env_template="${KIAUH_SRCDIR}/resources/moonraker.env"
+  local instance_name=$(get_instance_name "${i}")

  ### replace all placeholders
  if [[ ! -f ${service} ]]; then
@@ -368,8 +320,7 @@ function write_moonraker_service() {
    sudo cp "${service_template}" "${service}"
    sudo cp "${env_template}" "${env_file}"

-    [[ -z ${i} ]] && sudo sed -i "s| %INST%||" "${service}"
-    [[ -n ${i} ]] && sudo sed -i "s|%INST%|${i}|" "${service}"
+    sudo sed -i "s|%INST%|${instance_name}|" "${service}"
    sudo sed -i "s|%USER%|${USER}|g; s|%ENV%|${MOONRAKER_ENV}|; s|%ENV_FILE%|${env_file}|" "${service}"
    sudo sed -i "s|%USER%|${USER}|; s|%PRINTER_DATA%|${printer_data}|" "${env_file}"
  fi
@@ -385,6 +336,45 @@ function print_mr_ip_list() {
  done && echo
 }

+function get_moonraker_next_port() {
+  local port=7125
+  local moonraker_services=$(moonraker_systemd) moonraker_ports=()
+  for service in ${moonraker_services}
+  do
+    service_name=$(basename ${service})
+    moonraker_ports+=( "$(get_moonraker_port ${service_name})" )
+  done
+  while true; do
+    if [[ ! " ${moonraker_ports[*]} " =~ " ${port} " ]]; then
+      break
+    fi
+    (( port=port+1 ))
+  done
+  echo "${port}"
+}
+
+function get_moonraker_port() {
+  local service=${1}
+  local printer_data=$(get_data_folder ${service} moonraker)
+  local port=$(grep "^port:" "${printer_data}/config/moonraker.conf" | cut -f 2 -d " ")
+  echo "${port}"
+}
+
+function get_moonraker_address() {
+  local ip=$(hostname -I | cut -d" " -f1)
+  local port=$(get_moonraker_port ${1})
+  echo "${ip}:${port}"
+}
+
+function print_moonraker_addresses() {
+  local service_name moonraker_services=$(moonraker_systemd)
+  for service in ${moonraker_services}
+  do
+    service_name=$(basename ${service})
+    echo "   ${cyan}● ${service_name}:${white} $(get_moonraker_address ${service_name})"
+  done
+}
+
 ### introduced due to
 ### https://github.com/Arksine/moonraker/issues/349
 ### https://github.com/Arksine/moonraker/pull/346
@@ -435,22 +425,10 @@ function install_moonraker_polkit() {
 #================ REMOVE MOONRAKER ================#
 #==================================================#

-function remove_moonraker_sysvinit() {
-  [[ ! -e "${INITD}/moonraker" ]] && return
-
-  status_msg "Removing Moonraker SysVinit service ..."
-  sudo systemctl stop moonraker
-  sudo update-rc.d -f moonraker remove
-  sudo rm -f "${INITD}/moonraker" "${ETCDEF}/moonraker"
-  ok_msg "Moonraker SysVinit service removed!"
-}
-
 function remove_moonraker_systemd() {
-  [[ -z $(moonraker_systemd) ]] && return
-
  status_msg "Removing Moonraker Systemd Services ..."

-  for service in $(moonraker_systemd | cut -d"/" -f5); do
+  for service in "${@}"; do
    status_msg "Removing ${service} ..."
    sudo systemctl stop "${service}"
    sudo systemctl disable "${service}"
@@ -465,29 +443,25 @@ function remove_moonraker_systemd() {
 }

 function remove_moonraker_env_file() {
-  local files regex="\/home\/${USER}\/([A-Za-z0-9_]+)\/systemd\/moonraker\.env"
-  files=$(find "${HOME}" -maxdepth 3 -regextype posix-extended -regex "${regex}" | sort)
-
-  if [[ -n ${files} ]]; then
-    for file in ${files}; do
-      status_msg "Removing ${file} ..."
-      rm -f "${file}"
-      ok_msg "${file} removed!"
-    done
-  fi
+  local printer_data file
+  for service in "${@}"; do
+    printer_data=$(get_data_folder ${service} moonraker)
+    file="${printer_data}/systemd/moonraker.env"
+    status_msg "Removing ${file} ..."
+    rm -f "${file}"
+    ok_msg "${file} removed!"
+  done
 }

 function remove_moonraker_logs() {
-  local files regex="\/home\/${USER}\/([A-Za-z0-9_]+)\/logs\/moonraker\.log.*"
-  files=$(find "${HOME}" -maxdepth 3 -regextype posix-extended -regex "${regex}" | sort)
-
-  if [[ -n ${files} ]]; then
-    for file in ${files}; do
-      status_msg "Removing ${file} ..."
-      rm -f "${file}"
-      ok_msg "${file} removed!"
-    done
-  fi
+  local printer_data file
+  for service in "${@}"; do
+    printer_data=$(get_data_folder ${service} moonraker)
+    file="${printer_data}/systemd/moonraker.lo"*
+    status_msg "Removing ${file} ..."
+    rm -f "${file}"
+    ok_msg "${file} removed!"
+  done
 }

 function remove_legacy_moonraker_logs() {
@@ -544,15 +518,72 @@ function remove_moonraker_polkit() {
 }

 function remove_moonraker() {
-  remove_moonraker_sysvinit
-  remove_moonraker_systemd
-  remove_moonraker_env_file
-  remove_moonraker_logs
+  local moonraker_services=$(moonraker_systemd)
+  if [[ -z ${moonraker_services} ]]; then
+    print_error "Moonraker not installed, nothing to do!"
+    return
+  fi
+
+  local moonraker_services=$(moonraker_systemd)
+  if [[ -z ${moonraker_services} ]]; then
+    print_error "Moonraker not installed, nothing to do!"
+    return
+  fi
+
+  top_border
+  echo -e "|     ${red}~~~~~~~ [ Moonraker instance remover ] ~~~~~~${white}     |"
+  hr
+
+  local user_input=() moonraker_names=()
+  local moonraker_services_count="$(moonraker_systemd | wc -w)"
+  if (( moonraker_services_count == 1 )); then
+    service_name=$(basename ${moonraker_services})
+    moonraker_names+=( "${service_name}" )
+    printf "| 0) %-51s|\n" "${service_name}"
+  else
+    printf "| 0) %-51s|\n" "Remove all"
+    local i=1 service_name
+    for name in ${moonraker_services}; do
+      service_name=$(basename ${name})
+      moonraker_names+=( "${service_name}" )
+      printf "| ${i}) %-51s|\n" "${service_name}"
+      (( i=i+1 ))
+    done
+  fi
+  back_footer
+
+  local option
+  while true; do
+    read -p "${cyan}Remove Moonraker instance:${white} " option
+    if [[ ${option} == "B" || ${option} == "b" ]]; then
+      return
+    elif [[ $((option)) != $option ]]; then
+      error_msg "Invalid command!"
+    elif (( option >= 0 && option < ${#moonraker_names[@]} )); then
+      break
+    else
+      error_msg "Invalid command!"
+    fi
+  done
+
+  if (( option == 0 )); then
+    user_input=( ${moonraker_names[@]} )
+  else
+    user_input=( "${moonraker_names[(( option-1 ))]}" )
+  fi
+
+  remove_moonraker_systemd "${user_input[@]}"
+  remove_moonraker_env_file "${user_input[@]}"
+  remove_moonraker_logs "${user_input[@]}"
+
  remove_legacy_moonraker_logs
-  remove_moonraker_api_key
-  remove_moonraker_polkit
-  remove_moonraker_dir
-  remove_moonraker_env
+
+  if (( ${moonraker_services_count} == 1 )) || [[ "${option}" == "0" ]]; then
+    remove_moonraker_api_key
+    remove_moonraker_polkit
+    remove_moonraker_dir
+    remove_moonraker_env
+  fi

  print_confirm "Moonraker was successfully removed!"
  return
@@ -566,7 +597,8 @@ function update_moonraker() {
  do_action_service "stop" "moonraker"

  if [[ ! -d ${MOONRAKER_DIR} ]]; then
-    clone_moonraker "${MOONRAKER_REPO}"
+    error_msg "Nothing to update, Moonraker directory doesn't exists! Please install Moonraker first."
+    return
  else
    backup_before_update "moonraker"
    status_msg "Updating Moonraker ..."
--- a/scripts/nginx.sh
+++ b/scripts/nginx.sh
@@ -1,7 +1,7 @@
 #!/usr/bin/env bash

 #=======================================================================#
-# Copyright (C) 2020 - 2022 Dominik Willner <th33xitus@gmail.com>       #
+# Copyright (C) 2020 - 2023 Dominik Willner <th33xitus@gmail.com>       #
 #                                                                       #
 # This file is part of KIAUH - Klipper Installation And Update Helper   #
 # https://github.com/th33xitus/kiauh                                    #
@@ -79,7 +79,7 @@ function symlink_webui_nginx_log() {
  interface=${1}
  access_log="/var/log/nginx/${interface}-access.log"
  error_log="/var/log/nginx/${interface}-error.log"
-  regex="\/home\/${USER}\/([A-Za-z0-9_]+)\/logs"
+  regex="${HOME//\//\\/}\/([A-Za-z0-9_]+)\/logs"
  logpaths=$(find "${HOME}" -maxdepth 2 -type d -regextype posix-extended -regex "${regex}" | sort)

  for path in ${logpaths}; do
--- a/scripts/obico.sh
+++ b/scripts/obico.sh
@@ -1,7 +1,7 @@
 #!/usr/bin/env bash

 #=======================================================================#
-# Copyright (C) 2020 - 2022 Dominik Willner <th33xitus@gmail.com>       #
+# Copyright (C) 2020 - 2023 Dominik Willner <th33xitus@gmail.com>       #
 #                                                                       #
 # This file is part of KIAUH - Klipper Installation And Update Helper   #
 # https://github.com/th33xitus/kiauh                                    #
@@ -24,7 +24,7 @@ function moonraker_obico_systemd() {
 function moonraker_obico_config() {
  local moonraker_cfg_dirs

-  read -r -a moonraker_cfg_dirs <<< "$(get_config_folders)"
+  read -r -a moonraker_cfg_dirs <<< "$(get_instance_folder_path "config")"

  if (( ${#moonraker_cfg_dirs[@]} > 0 )); then
    echo "${moonraker_cfg_dirs[${1}]}/moonraker-obico.cfg"
@@ -65,7 +65,6 @@ function obico_server_url_prompt() {
 function moonraker_obico_setup_dialog() {
  status_msg "Initializing Moonraker-obico installation ..."

-
  local moonraker_count
  local moonraker_names

@@ -103,7 +102,6 @@ function moonraker_obico_setup_dialog() {
      if (( existing_moonraker_obico_count > 0 )); then
        printf "|${green}%-55s${white}|\n" " ${existing_moonraker_obico_count} Moonraker-obico instances already installed!"
        for svc in ${moonraker_obico_services}; do
-#          printf "|${cyan}%-57s${white}|\n" " ● moonraker-obco-$(get_instance_name "${svc}" moonraker-obico)"
          printf "|${cyan}%-57s${white}|\n" " ● moonraker-obco-$(get_instance_name "${svc}")"
        done
      fi
@@ -179,17 +177,29 @@ function moonraker_obico_setup_dialog() {

    ### step 6: call moonrake-obico/install.sh with the correct params
    local port=7125
-    local moonraker_cfg_dirs
+    local instance_cfg_dirs
+    local instance_log_dirs

-    read -r -a moonraker_cfg_dirs <<< "$(get_config_folders)"
+    read -r -a instance_cfg_dirs <<< "$(get_instance_folder_path "config")"
+    read -r -a instance_log_dirs <<< "$(get_instance_folder_path "logs")"

    if (( moonraker_count == 1 )); then
-      "${MOONRAKER_OBICO_DIR}/install.sh" -C "${moonraker_cfg_dirs[0]}/moonraker.conf" -p "${port}" -H 127.0.0.1 -l "${KLIPPER_LOGS}" -s -L -S "${obico_server_url}"
+      "${MOONRAKER_OBICO_DIR}/install.sh"\
+      -C "${instance_cfg_dirs[0]}/moonraker.conf"\
+      -p "${port}" -H 127.0.0.1 -l\
+      "${instance_log_dirs[0]}"\
+      -L -S "${obico_server_url}"
    elif (( moonraker_count > 1 )); then
      local j=${existing_moonraker_obico_count}

      for (( i=1; i <= new_moonraker_obico_count; i++ )); do
-        "${MOONRAKER_OBICO_DIR}/install.sh" -n "${moonraker_names[${j}]}" -C "${moonraker_cfg_dirs[${j}]}/moonraker.conf" -p $((port+j)) -H 127.0.0.1 -l "${KLIPPER_LOGS}" -s -L -S "${obico_server_url}"
+        "${MOONRAKER_OBICO_DIR}/install.sh"\
+        -n "${moonraker_names[${j}]}"\
+        -C "${instance_cfg_dirs[${j}]}/moonraker.conf"\
+        -p $((port+j))\
+        -H 127.0.0.1\
+        -l "${instance_log_dirs[${j}]}"\
+        -L -S "${obico_server_url}"
        j=$(( j + 1 ))
      done && unset j
    fi # (( moonraker_count == 1 ))
@@ -301,8 +311,21 @@ function remove_moonraker_obico_systemd() {
 }

 function remove_moonraker_obico_logs() {
+  local files regex="${HOME//\//\\/}\/([A-Za-z0-9_]+)\/logs\/moonraker-obico(-[0-9a-zA-Z]+)?\.log(.*)?"
+  files=$(find "${HOME}" -maxdepth 3 -regextype posix-extended -regex "${regex}" | sort)
+
+  if [[ -n ${files} ]]; then
+    for file in ${files}; do
+      status_msg "Removing ${file} ..."
+      rm -f "${file}"
+      ok_msg "${file} removed!"
+    done
+  fi
+}
+
+function remove_legacy_moonraker_obico_logs() {
  local files regex="moonraker-obico(-[0-9a-zA-Z]+)?\.log(.*)?"
-  files=$(find "${KLIPPER_LOGS}" -maxdepth 1 -regextype posix-extended -regex "${KLIPPER_LOGS}/${regex}" 2> /dev/null | sort)
+  files=$(find "${HOME}/klipper_logs" -maxdepth 1 -regextype posix-extended -regex "${HOME}/klipper_logs/${regex}" 2> /dev/null | sort)

  if [[ -n ${files} ]]; then
    for file in ${files}; do
@@ -372,7 +395,7 @@ function get_moonraker_obico_status() {

  is_linked="true"
  if [[ -n ${moonraker_obico_services} ]]; then
-    for cfg_dir in $(get_config_folders); do
+    for cfg_dir in $(get_instance_folder_path "config"); do
      if moonraker_obico_needs_linking "${cfg_dir}/moonraker-obico.cfg"; then
        is_linked="false"
      fi
--- a/scripts/octoeverywhere.sh
+++ b/scripts/octoeverywhere.sh
@@ -0,0 +1,395 @@
+#!/usr/bin/env bash
+
+#=======================================================================#
+# Copyright (C) 2020 - 2023 Dominik Willner <th33xitus@gmail.com>       #
+#                                                                       #
+# This file is part of KIAUH - Klipper Installation And Update Helper   #
+# https://github.com/th33xitus/kiauh                                    #
+#                                                                       #
+# This file may be distributed under the terms of the GNU GPLv3 license #
+#=======================================================================#
+
+#
+# This file is written and maintained by Quinn Damerell from OctoEverywhere
+# Please contact our support team if you need any help!
+# https://octoeverywhere.com/support
+#
+
+set -e
+
+#===================================================#
+#==============         Install         ============#
+#===================================================#
+
+function octoeverywhere_systemd() {
+  local services
+  services=$(find "${SYSTEMD}" -maxdepth 1 -regextype posix-extended -regex "${SYSTEMD}/octoeverywhere(-[0-9a-zA-Z]+)?.service")
+  echo "${services}"
+}
+
+function octoeverywhere_setup_dialog() {
+  status_msg "Initializing OctoEverywhere for Klipper installation ..."
+
+  # First, check for moonraker service instances.
+  local moonraker_count
+  local moonraker_names
+  moonraker_count=$(moonraker_systemd | wc -w)
+  if (( moonraker_count == 0 )); then
+    ### return early if moonraker is not installed
+    local error="Moonraker not installed! Please install Moonraker first!"
+    log_error   "OctoEverywhere setup started without Moonraker being installed. Aborting setup."
+    print_error "${error}" && return
+  elif (( moonraker_count > 1 )); then
+    # moonraker_names is valid only in case of multi-instance
+    read -r -a moonraker_names <<< "$(get_multi_instance_names)"
+  fi
+
+  # Next, check for any existing OctoEverywhere services.
+  local octoeverywhere_services
+  local existing_octoeverywhere_count
+  octoeverywhere_services=$(octoeverywhere_systemd)
+  existing_octoeverywhere_count=$(echo "${octoeverywhere_services}" | wc -w )
+
+  # We need to make the moonraker instance count to the OctoEverywhere service count.
+  local allowed_octoeverywhere_count=$(( moonraker_count - existing_octoeverywhere_count ))
+  if (( allowed_octoeverywhere_count > 0 )); then
+    local new_octoeverywhere_count
+
+    ### Step 1: Ask for the number of OctoEverywhere instances to install
+    if (( moonraker_count == 1 )); then
+      ok_msg "Moonraker installation found!\n"
+      new_octoeverywhere_count=1
+    elif (( moonraker_count > 1 )); then
+      top_border
+      printf "|${green}%-55s${white}|\n" " ${moonraker_count} Moonraker instances found!"
+      for name in "${moonraker_names[@]}"; do
+        printf "|${cyan}%-57s${white}|\n" " ● moonraker-${name}"
+      done
+      blank_line
+      if (( existing_octoeverywhere_count > 0 )); then
+        printf "|${green}%-55s${white}|\n" " ${existing_octoeverywhere_count} OctoEverywhere instances already installed!"
+        for svc in ${octoeverywhere_services}; do
+          printf "|${cyan}%-57s${white}|\n" " ● octoeverywhere-$(get_instance_name "${svc}")"
+        done
+      fi
+      blank_line
+      echo -e "| The setup will apply the same names to                |"
+      echo -e "| OctoEverywhere                                        |"
+      blank_line
+      echo -e "| Please select the number of OctoEverywhere instances  |"
+      echo -e "| to install. Usually one OctoEverywhere instance per   |"
+      echo -e "| Moonraker instance is required, but you may not       |"
+      echo -e "| install more OctoEverywhere instances than available  |"
+      echo -e "| Moonraker instances.                                  |"
+      bottom_border
+
+      ### ask for amount of instances
+      local re="^[1-9][0-9]*$"
+      while [[ ! ${new_octoeverywhere_count} =~ ${re} || ${new_octoeverywhere_count} -gt ${allowed_octoeverywhere_count} ]]; do
+        read -p "${cyan}###### Number of new OctoEverywhere instances to set up:${white} " -i "${allowed_octoeverywhere_count}" -e new_octoeverywhere_count
+        ### break if input is valid
+        [[ ${new_octoeverywhere_count} =~ ${re} && ${new_octoeverywhere_count} -le ${allowed_octoeverywhere_count} ]] && break
+        ### conditional error messages
+        [[ ! ${new_octoeverywhere_count} =~ ${re} ]] && error_msg "Input not a number"
+        (( new_octoeverywhere_count > allowed_octoeverywhere_count )) && error_msg "Number of OctoEverywhere instances larger than installed Moonraker instances"
+      done && select_msg "${new_octoeverywhere_count}"
+    else
+      log_error "Internal error. moonraker_count of '${moonraker_count}' not equal or grater than one!"
+      return 1
+    fi  # (( moonraker_count == 1 ))
+  fi  # (( allowed_octoeverywhere_count > 0 ))
+
+  # Special case for one moonraker instance with OctoEverywhere already installed.
+  # If the user selects the install option again, they might be trying to recover the install
+  # or complete a printer link they didn't finish in the past.
+  # So in this case, we will allow them to run the install script again, since it's safe to run
+  # if the service is already installed, it will repair any missing issues.
+  if (( allowed_octoeverywhere_count == 0 && moonraker_count == 1 )); then
+    local yn
+    while true; do
+      echo "${yellow}OctoEverywhere is already installed.${white}"
+      echo "It is safe to run the install again to repair any issues or if the printer isn't linked, run the printer linking logic again."
+      echo ""
+      local question="Do you want to run the OctoEverywhere recovery or linking logic again?"
+      read -p "${cyan}###### ${question} (Y/n):${white} " yn
+      case "${yn}" in
+        Y|y|Yes|yes|"")
+          select_msg "Yes"
+          break;;
+        N|n|No|no)
+          select_msg "No"
+          abort_msg "Exiting OctoEverywhere setup ...\n"
+          return;;
+        *)
+          error_msg "Invalid Input!";;
+      esac
+    done
+    # The user responded yes, allow the install to run again.
+    allowed_octoeverywhere_count=1
+  fi
+
+  # If there's something to install, do it!
+  if (( allowed_octoeverywhere_count > 0 )); then
+
+    (( new_octoeverywhere_count > 1 )) && status_msg "Installing ${new_octoeverywhere_count} OctoEverywhere instances ..."
+    (( new_octoeverywhere_count == 1 )) && status_msg "Installing OctoEverywhere ..."
+
+    # Ensure the basic system dependencies are installed.
+    local dep=(git dfu-util virtualenv python3 python3-pip python3-venv)
+    dependency_check "${dep[@]}"
+
+    # Close the repo
+    clone_octoeverywhere "${OCTOEVERYWHERE_REPO}"
+
+    # Call install with the correct args.
+    local instance_cfg_dirs
+    read -r -a instance_cfg_dirs <<< "$(get_instance_folder_path "config")"
+    echo instance_cfg_dirs[0]
+
+    if (( moonraker_count == 1 )); then
+      "${OCTOEVERYWHERE_DIR}/install.sh" "${instance_cfg_dirs[0]}/moonraker.conf"
+    elif (( moonraker_count > 1 )); then
+      local j=${existing_octoeverywhere_count}
+
+      for (( i=1; i <= new_octoeverywhere_count; i++ )); do
+        "${OCTOEVERYWHERE_DIR}/install.sh" "${instance_cfg_dirs[${j}]}/moonraker.conf"
+        j=$(( j + 1 ))
+      done && unset j
+    fi # (( moonraker_count == 1 ))
+  fi  # (( allowed_octoeverywhere_count > 0 ))
+}
+
+function clone_octoeverywhere() {
+  local repo=${1}
+
+  status_msg "Cloning OctoEverywhere..."
+  ### force remove existing repos
+  [[ -d "${OCTOEVERYWHERE_DIR}" ]] && rm -rf "${OCTOEVERYWHERE_DIR}"
+
+  cd "${HOME}" || exit 1
+  if ! git clone "${repo}" "${OCTOEVERYWHERE_DIR}"; then
+    print_error "Cloning OctoEverywhere from\n ${repo}\n failed!"
+    exit 1
+  fi
+}
+
+function octoeverywhere_install() {
+  "${OCTOEVERYWHERE_DIR}/install.sh" "$@"
+}
+
+#===================================================#
+#=============        Remove          ==============#
+#===================================================#
+
+function remove_octoeverywhere_systemd() {
+  [[ -z $(octoeverywhere_systemd) ]] && return
+  status_msg "Removing OctoEverywhere Systemd Services ..."
+
+  for service in $(octoeverywhere_systemd | cut -d"/" -f5); do
+    status_msg "Removing ${service} ..."
+    sudo systemctl stop "${service}"
+    sudo systemctl disable "${service}"
+    sudo rm -f "${SYSTEMD}/${service}"
+    ok_msg "Done!"
+  done
+
+  ### reloading units
+  sudo systemctl daemon-reload
+  sudo systemctl reset-failed
+  ok_msg "OctoEverywhere Services removed!"
+}
+
+function remove_octoeverywhere_logs() {
+  local files regex="${HOME//\//\\/}\/([A-Za-z0-9_]+)\/logs\/octoeverywhere(-[0-9a-zA-Z]+)?\.log(.*)?"
+  files=$(find "${HOME}" -maxdepth 3 -regextype posix-extended -regex "${regex}" | sort)
+
+  if [[ -n ${files} ]]; then
+    for file in ${files}; do
+      status_msg "Removing ${file} ..."
+      rm -f "${file}"
+      ok_msg "${file} removed!"
+    done
+  fi
+}
+
+function remove_octoeverywhere_dir() {
+  [[ ! -d ${OCTOEVERYWHERE_DIR} ]] && return
+
+  status_msg "Removing OctoEverywhere directory ..."
+  rm -rf "${OCTOEVERYWHERE_DIR}"
+  ok_msg "Directory removed!"
+}
+
+function remove_octoeverywhere_config() {
+  # Remove the system config but not the main config, so the printer id doesn't get lost.
+  local files regex="${HOME//\//\\/}\/([A-Za-z0-9_]+)\/config\/octoeverywhere-system(-[0-9a-zA-Z]+)?\.cfg(.*)?"
+  files=$(find "${HOME}" -maxdepth 4 -regextype posix-extended -regex "${regex}" | sort)
+
+  if [[ -n ${files} ]]; then
+    for file in ${files}; do
+      status_msg "Removing ${file} ..."
+      rm -f "${file}"
+      ok_msg "${file} removed!"
+    done
+  fi
+}
+
+function remove_octoeverywhere_store_dir() {
+  local files regex="${HOME//\//\\/}\/([A-Za-z0-9_]+)\/octoeverywhere-store"
+  files=$(find "${HOME}" -maxdepth 2 -type d -regextype posix-extended -regex "${regex}" | sort)
+
+  if [[ -n ${files} ]]; then
+    for file in ${files}; do
+      status_msg "Removing ${file} ..."
+      rm -rf "${file}"
+      ok_msg "${file} removed!"
+    done
+  fi
+}
+
+function remove_octoeverywhere_env() {
+  [[ ! -d "${HOME}/octoeverywhere-env" ]] && return
+
+  status_msg "Removing octoeverywhere-env directory ..."
+  rm -rf "${HOME}/octoeverywhere-env"
+  ok_msg "Directory removed!"
+}
+
+function remove_octoeverywhere()
+{
+  remove_octoeverywhere_systemd
+  remove_octoeverywhere_logs
+  remove_octoeverywhere_dir
+  remove_octoeverywhere_env
+  remove_octoeverywhere_config
+  remove_octoeverywhere_store_dir
+
+  print_confirm "OctoEverywhere was successfully removed!"
+  return
+}
+
+#===================================================#
+#=============        UPDATE          ==============#
+#===================================================#
+
+function update_octoeverywhere() {
+  do_action_service "stop" "octoeverywhere"
+
+  if [[ ! -d ${OCTOEVERYWHERE_DIR} ]]; then
+    clone_octoeverywhere "${OCTOEVERYWHERE_REPO}"
+  else
+    backup_before_update "octoeverywhere"
+    status_msg "Updating OctoEverywhere for Klipper ..."
+    cd "${OCTOEVERYWHERE_DIR}" && git pull
+    ### read PKGLIST and install possible new dependencies
+    install_octoeverywhere_dependencies
+    ### install possible new python dependencies
+    "${OCTOEVERYWHERE_ENV}"/bin/pip install -r "${OCTOEVERYWHERE_DIR}/requirements.txt"
+  fi
+
+  ok_msg "Update complete!"
+  do_action_service "restart" "octoeverywhere"
+}
+
+function clone_octoeverywhere() {
+  local repo=${1}
+
+  status_msg "Cloning OctoEverywhere from ${repo} ..."
+
+  ### force remove existing octoeverywhere dir and clone into fresh octoeverywhere dir
+  [[ -d ${OCTOEVERYWHERE_DIR} ]] && rm -rf "${OCTOEVERYWHERE_DIR}"
+
+  cd "${HOME}" || exit 1
+  if ! git clone "${OCTOEVERYWHERE_REPO}" "${OCTOEVERYWHERE_DIR}"; then
+    print_error "Cloning OctoEverywhere from\n ${repo}\n failed!"
+    exit 1
+  fi
+}
+
+function install_octoeverywhere_dependencies() {
+  local packages
+  local install_script="${OCTOEVERYWHERE_DIR}/install.sh"
+
+  ### read PKGLIST from official install-script
+  status_msg "Reading dependencies..."
+  # shellcheck disable=SC2016
+  packages="$(grep "PKGLIST=" "${install_script}" | cut -d'"' -f2 | sed 's/\${PKGLIST}//g' | tr -d '\n')"
+
+  echo "${cyan}${packages}${white}" | tr '[:space:]' '\n'
+  read -r -a packages <<< "${packages}"
+
+  ### Update system package info
+  status_msg "Updating package lists..."
+  if ! sudo apt-get update --allow-releaseinfo-change; then
+    log_error "failure while updating package lists"
+    error_msg "Updating package lists failed!"
+    exit 1
+  fi
+
+  ### Install required packages
+  status_msg "Installing required packages..."
+  if ! sudo apt-get install --yes "${packages[@]}"; then
+    log_error "failure while installing required octoeverywhere packages"
+    error_msg "Installing required packages failed!"
+    exit 1
+  fi
+}
+
+#===================================================#
+#=============        STATUS          ==============#
+#===================================================#
+
+function get_octoeverywhere_status() {
+  local status
+  local service_count
+  local octoeverywhere_services
+
+  octoeverywhere_services=$(octoeverywhere_systemd)
+  service_count=$(echo "${octoeverywhere_services}" | wc -w )
+
+  if (( service_count == 0 )); then
+    status="Not installed!"
+  elif [[ ! -d "${OCTOEVERYWHERE_DIR}" ]]; then
+    status="Incomplete!"
+  else
+    status="Installed!"
+  fi
+
+  echo "${status}"
+}
+
+function get_local_octoeverywhere_commit() {
+  [[ ! -d ${OCTOEVERYWHERE_DIR} || ! -d "${OCTOEVERYWHERE_DIR}/.git" ]] && return
+
+  local commit
+  cd "${OCTOEVERYWHERE_DIR}"
+  commit="$(git describe HEAD --always --tags | cut -d "-" -f 1,2)"
+  echo "${commit}"
+}
+
+function get_remote_octoeverywhere_commit() {
+  [[ ! -d ${OCTOEVERYWHERE_DIR} || ! -d "${OCTOEVERYWHERE_DIR}/.git" ]] && return
+
+  local commit
+  cd "${OCTOEVERYWHERE_DIR}" && git fetch origin -q
+  commit=$(git describe origin/master --always --tags | cut -d "-" -f 1,2)
+  echo "${commit}"
+}
+
+function compare_octoeverywhere_versions() {
+  local versions local_ver remote_ver
+  local_ver="$(get_local_octoeverywhere_commit)"
+  remote_ver="$(get_remote_octoeverywhere_commit)"
+
+  if [[ ${local_ver} != "${remote_ver}" ]]; then
+    versions="${yellow}$(printf " %-14s" "${local_ver}")${white}"
+    versions+="|${green}$(printf " %-13s" "${remote_ver}")${white}"
+    # Add us to the update file, so if the user selects "update all" it includes us.
+    add_to_application_updates "octoeverywhere"
+  else
+    versions="${green}$(printf " %-14s" "${local_ver}")${white}"
+    versions+="|${green}$(printf " %-13s" "${remote_ver}")${white}"
+  fi
+
+  echo "${versions}"
+}
--- a/scripts/octoprint.sh
+++ b/scripts/octoprint.sh
@@ -1,7 +1,7 @@
 #!/usr/bin/env bash

 #=======================================================================#
-# Copyright (C) 2020 - 2022 Dominik Willner <th33xitus@gmail.com>       #
+# Copyright (C) 2020 - 2023 Dominik Willner <th33xitus@gmail.com>       #
 #                                                                       #
 # This file is part of KIAUH - Klipper Installation And Update Helper   #
 # https://github.com/th33xitus/kiauh                                    #
@@ -25,7 +25,7 @@ function octoprint_setup_dialog() {
  status_msg "Initializing OctoPrint installation ..."

  local klipper_services
-  klipper_services=$(find_klipper_systemd)
+  klipper_services=$(klipper_systemd)
  if [[ -z ${klipper_services} ]]; then
    local error="Klipper not installed! Please install Klipper first!"
    log_error "OctoPrint setup started without Klipper being installed. Aborting setup."
@@ -227,21 +227,30 @@ function create_octoprint_service() {
  local octoprint_count=${input[0]} && unset "input[0]"
  local names=("${input[@]}") && unset "input[@]"
  local j=0 port=5000
-  local octo_env service basedir tmp_printer config_yaml restart_cmd
+  local printer_data octo_env service basedir printer config_yaml restart_cmd

  for (( i=1; i <= octoprint_count; i++ )); do
    if (( octoprint_count == 1 )); then
+      printer_data="${HOME}/printer_data"
      octo_env="${HOME}/OctoPrint"
      service="${SYSTEMD}/octoprint.service"
      basedir="${HOME}/.octoprint"
-      tmp_printer="/tmp/printer"
+      printer="${printer_data}/comms/klippy.serial"
      config_yaml="${basedir}/config.yaml"
      restart_cmd="sudo service octoprint restart"
    elif (( octoprint_count > 1 )); then
+
+      local re="^[1-9][0-9]*$"
+      if [[ ${names[j]} =~ ${re} ]]; then
+        printer_data="${HOME}/printer_${names[${j}]}_data"
+      else
+        printer_data="${HOME}/${names[${j}]}_data"
+      fi
+
      octo_env="${HOME}/OctoPrint_${names[${j}]}"
      service="${SYSTEMD}/octoprint-${names[${j}]}.service"
      basedir="${HOME}/.octoprint_${names[${j}]}"
-      tmp_printer="/tmp/printer-${names[${j}]}"
+      printer="${printer_data}/comms/klippy.serial"
      config_yaml="${basedir}/config.yaml"
      restart_cmd="sudo service octoprint-${names[${j}]} restart"
    fi
@@ -280,9 +289,9 @@ OCTOPRINT
      /bin/sh -c "cat > ${basedir}/config.yaml" << CONFIGYAML
 serial:
    additionalPorts:
-    - ${tmp_printer}
+    - ${printer}
    disconnectOnErrors: false
-    port: ${tmp_printer}
+    port: ${printer}
 server:
    commands:
        serverRestartCommand: ${restart_cmd}
--- a/scripts/pretty_gcode.sh
+++ b/scripts/pretty_gcode.sh
@@ -1,7 +1,7 @@
 #!/usr/bin/env bash

 #=======================================================================#
-# Copyright (C) 2020 - 2022 Dominik Willner <th33xitus@gmail.com>       #
+# Copyright (C) 2020 - 2023 Dominik Willner <th33xitus@gmail.com>       #
 #                                                                       #
 # This file is part of KIAUH - Klipper Installation And Update Helper   #
 # https://github.com/th33xitus/kiauh                                    #
@@ -38,7 +38,7 @@ function install_pgc_for_klipper() {
  fi

  sudo cp "${pgconfsrc}" "${pgconf}"
-  sudo sed -i "s|/home/pi/pgcode;|/home/${USER}/pgcode;|" "${pgconf}"
+  sudo sed -i "s|/home/pi/pgcode;|${HOME}/pgcode;|" "${pgconf}"

  ### replace default port
  if (( pgc_custom_port != pgc_default_port )); then
--- a/scripts/rollback.sh
+++ b/scripts/rollback.sh
@@ -1,7 +1,7 @@
 #!/usr/bin/env bash

 #=======================================================================#
-# Copyright (C) 2020 - 2022 Dominik Willner <th33xitus@gmail.com>       #
+# Copyright (C) 2020 - 2023 Dominik Willner <th33xitus@gmail.com>       #
 #                                                                       #
 # This file is part of KIAUH - Klipper Installation And Update Helper   #
 # https://github.com/th33xitus/kiauh                                    #
--- a/scripts/switch_klipper_repo.sh
+++ b/scripts/switch_klipper_repo.sh
@@ -1,7 +1,7 @@
 #!/usr/bin/env bash

 #=======================================================================#
-# Copyright (C) 2020 - 2022 Dominik Willner <th33xitus@gmail.com>       #
+# Copyright (C) 2020 - 2023 Dominik Willner <th33xitus@gmail.com>       #
 #                                                                       #
 # This file is part of KIAUH - Klipper Installation And Update Helper   #
 # https://github.com/th33xitus/kiauh                                    #
--- a/scripts/ui/advanced_menu.sh
+++ b/scripts/ui/advanced_menu.sh
@@ -1,7 +1,7 @@
 #!/usr/bin/env bash

 #=======================================================================#
-# Copyright (C) 2020 - 2022 Dominik Willner <th33xitus@gmail.com>       #
+# Copyright (C) 2020 - 2023 Dominik Willner <th33xitus@gmail.com>       #
 #                                                                       #
 # This file is part of KIAUH - Klipper Installation And Update Helper   #
 # https://github.com/th33xitus/kiauh                                    #
--- a/scripts/ui/backup_menu.sh
+++ b/scripts/ui/backup_menu.sh
@@ -1,7 +1,7 @@
 #!/usr/bin/env bash

 #=======================================================================#
-# Copyright (C) 2020 - 2022 Dominik Willner <th33xitus@gmail.com>       #
+# Copyright (C) 2020 - 2023 Dominik Willner <th33xitus@gmail.com>       #
 #                                                                       #
 # This file is part of KIAUH - Klipper Installation And Update Helper   #
 # https://github.com/th33xitus/kiauh                                    #
--- a/scripts/ui/general_ui.sh
+++ b/scripts/ui/general_ui.sh
@@ -1,7 +1,7 @@
 #!/usr/bin/env bash

 #=======================================================================#
-# Copyright (C) 2020 - 2022 Dominik Willner <th33xitus@gmail.com>       #
+# Copyright (C) 2020 - 2023 Dominik Willner <th33xitus@gmail.com>       #
 #                                                                       #
 # This file is part of KIAUH - Klipper Installation And Update Helper   #
 # https://github.com/th33xitus/kiauh                                    #
--- a/scripts/ui/install_menu.sh
+++ b/scripts/ui/install_menu.sh
@@ -1,7 +1,7 @@
 #!/usr/bin/env bash

 #=======================================================================#
-# Copyright (C) 2020 - 2022 Dominik Willner <th33xitus@gmail.com>       #
+# Copyright (C) 2020 - 2023 Dominik Willner <th33xitus@gmail.com>       #
 #                                                                       #
 # This file is part of KIAUH - Klipper Installation And Update Helper   #
 # https://github.com/th33xitus/kiauh                                    #
@@ -26,9 +26,10 @@ function install_ui() {
  echo -e "| Klipper Webinterface:    |  7) [PrettyGCode]          |"
  echo -e "|  3) [Mainsail]           |  8) [Telegram Bot]         |"
  echo -e "|  4) [Fluidd]             |  9) $(obico_install_title) |"
-  echo -e "|                          |                            |"
-  echo -e "| Touchscreen GUI:         | Webcam Streamer:           |"
-  echo -e "|  5) [KlipperScreen]      | 10) [MJPG-Streamer]        |"
+  echo -e "|                          | 10) [OctoEverywhere]       |"
+  echo -e "| Touchscreen GUI:         |                            |"
+  echo -e "|  5) [KlipperScreen]      | Webcam Streamer:           |"
+  echo -e "|                          | 11) [Crowsnest]            |"
  back_footer
 }

@@ -47,7 +48,7 @@ function install_menu() {
    read -p "${cyan}####### Perform action:${white} " action
    case "${action}" in
      1)
-        do_action "select_klipper_python_version" "install_ui";;
+        do_action "start_klipper_setup" "install_ui";;
      2)
        do_action "moonraker_setup_dialog" "install_ui";;
      3)
@@ -55,35 +56,19 @@ function install_menu() {
      4)
        do_action "install_fluidd" "install_ui";;
      5)
-        #do_action "install_klipperscreen" "install_ui";;
-        clear && print_header
-        print_error "Function currently disabled! Sorry!"
-        install_ui;;
+        do_action "install_klipperscreen" "install_ui";;
      6)
-        #do_action "octoprint_setup_dialog" "install_ui";;
-        clear && print_header
-        print_error "Function currently disabled! Sorry!"
-        install_ui;;
+        do_action "octoprint_setup_dialog" "install_ui";;
      7)
-        #do_action "install_pgc_for_klipper" "install_ui";;
-        clear && print_header
-        print_error "Function currently disabled! Sorry!"
-        install_ui;;
+        do_action "install_pgc_for_klipper" "install_ui";;
      8)
-        #do_action "telegram_bot_setup_dialog" "install_ui";;
-        clear && print_header
-        print_error "Function currently disabled! Sorry!"
-        install_ui;;
+        do_action "telegram_bot_setup_dialog" "install_ui";;
      9)
-        #do_action "moonraker_obico_setup_dialog" "install_ui";;
-        clear && print_header
-        print_error "Function currently disabled! Sorry!"
-        install_ui;;
+        do_action "moonraker_obico_setup_dialog" "install_ui";;
      10)
-        #do_action "install_mjpg-streamer" "install_ui";;
-        clear && print_header
-        print_error "Function currently disabled! Sorry!"
-        install_ui;;
+        do_action "octoeverywhere_setup_dialog" "install_ui";;
+      11)
+        do_action "install_crowsnest" "install_ui";;
      B|b)
        clear; main_menu; break;;
      *)
@@ -92,33 +77,3 @@ function install_menu() {
  done
  install_menu
 }
-
-function select_klipper_python_version() {
-  top_border
-  echo -e "| Please select the preferred Python version.           | "
-  echo -e "| The recommended version is Python 2.7.                | "
-  blank_line
-  echo -e "| Installing Klipper with Python 3 is officially not    | "
-  echo -e "| recommended and should be considered as experimental. | "
-  hr
-  echo -e "|  1) [Python 2.7]  (recommended)                       | "
-  echo -e "|  2) [Python 3.x]  ${yellow}(experimental)${white}                      | "
-  back_footer
-  while true; do
-    read -p "${cyan}###### Select Python version:${white} " action
-    case "${action}" in
-      1)
-        select_msg "Python 2.7"
-        klipper_setup_dialog "python2"
-        break;;
-      2)
-        select_msg "Python 3.x"
-        klipper_setup_dialog "python3"
-        break;;
-      B|b)
-        clear; install_menu; break;;
-      *)
-        error_msg "Invalid Input!\n";;
-    esac
-  done
-}
--- a/scripts/ui/main_menu.sh
+++ b/scripts/ui/main_menu.sh
@@ -1,7 +1,7 @@
 #!/usr/bin/env bash

 #=======================================================================#
-# Copyright (C) 2020 - 2022 Dominik Willner <th33xitus@gmail.com>       #
+# Copyright (C) 2020 - 2023 Dominik Willner <th33xitus@gmail.com>       #
 #                                                                       #
 # This file is part of KIAUH - Klipper Installation And Update Helper   #
 # https://github.com/th33xitus/kiauh                                    #
@@ -19,18 +19,21 @@ function main_ui() {
  top_border
  echo -e "|     $(title_msg "~~~~~~~~~~~~~~~ [ Main Menu ] ~~~~~~~~~~~~~~~")     |"
  hr
-  echo -e "|  0) [Log-Upload]   |       Klipper: $(print_status "klipper")|"
-  echo -e "|                    |          Repo: $(print_klipper_repo)|"
-  echo -e "|  1) [Install]      |                                  |"
-  echo -e "|  2) [Update]       |     Moonraker: $(print_status "moonraker")|"
-  echo -e "|  3) [Remove]       |                                  |"
-  echo -e "|  4) [Advanced]     |      Mainsail: $(print_status "mainsail")|"
-  echo -e "|  5) [Backup]       |        Fluidd: $(print_status "fluidd")|"
-  echo -e "|                    | KlipperScreen: $(print_status "klipperscreen")|"
-  echo -e "|  6) [Settings]     |  Telegram Bot: $(print_status "telegram_bot")|"
-  echo -e "|                    |         Obico: $(print_status "moonraker_obico")|"
-  echo -e "|                    |                                  |"
-  echo -e "|  $(print_kiauh_version)|     Octoprint: $(print_status "octoprint")|"
+  echo -e "|  0) [Log-Upload] |         Klipper: $(print_status "klipper")|"
+  echo -e "|                  |            Repo: $(print_klipper_repo)|"
+  echo -e "|  1) [Install]    |                                    |"
+  echo -e "|  2) [Update]     |       Moonraker: $(print_status "moonraker")|"
+  echo -e "|  3) [Remove]     |                                    |"
+  echo -e "|  4) [Advanced]   |        Mainsail: $(print_status "mainsail")|"
+#  echo -e "|  5) [Backup]     |        Fluidd: $(print_status "fluidd")|"
+  echo -e "|                  |          Fluidd: $(print_status "fluidd")|"
+  echo -e "|                  |   KlipperScreen: $(print_status "klipperscreen")|"
+  echo -e "|  6) [Settings]   |    Telegram Bot: $(print_status "telegram_bot")|"
+  echo -e "|                  |       Crowsnest: $(print_status "crowsnest")|"
+  echo -e "|                  |           Obico: $(print_status "moonraker_obico")|"
+  echo -e "|                  |  OctoEverywhere: $(print_status "octoeverywhere")|"
+  echo -e "|                  |                                    |"
+  echo -e "|  $(print_kiauh_version)|       Octoprint: $(print_status "octoprint")|"
  quit_footer
 }

@@ -43,7 +46,7 @@ function get_kiauh_version() {

 function print_kiauh_version() {
  local version
-  version="$(printf "%-18s" "$(get_kiauh_version)")"
+  version="$(printf "%-16s" "$(get_kiauh_version)")"
  echo "${cyan}${version}${white}"
 }

@@ -106,6 +109,9 @@ function main_menu() {
      "start octoprint") do_action_service "start" "octoprint"; main_ui;;
      "stop octoprint") do_action_service "stop" "octoprint"; main_ui;;
      "restart octoprint") do_action_service "restart" "octoprint"; main_ui;;
+      "start crowsnest") do_action_service "start" "crowsnest"; main_ui;;
+      "stop crowsnest") do_action_service "stop" "crowsnest"; main_ui;;
+      "restart crowsnest") do_action_service "restart" "crowsnest"; main_ui;;
      update) do_action "update_kiauh" "main_ui";;
      0)clear && print_header
        #upload_selection
--- a/scripts/ui/remove_menu.sh
+++ b/scripts/ui/remove_menu.sh
@@ -1,7 +1,7 @@
 #!/usr/bin/env bash

 #=======================================================================#
-# Copyright (C) 2020 - 2022 Dominik Willner <th33xitus@gmail.com>       #
+# Copyright (C) 2020 - 2023 Dominik Willner <th33xitus@gmail.com>       #
 #                                                                       #
 # This file is part of KIAUH - Klipper Installation And Update Helper   #
 # https://github.com/th33xitus/kiauh                                    #
@@ -18,16 +18,18 @@ function remove_ui() {
  echo -e "| ${yellow}INFO: Configurations and/or any backups will be kept!${white} |"
  hr
  echo -e "| Firmware & API:           | 3rd Party Webinterface:   |"
-  echo -e "|  1) [Klipper]             |  6) [OctoPrint]           |"
+  echo -e "|  1) [Klipper]             |  8) [OctoPrint]           |"
  echo -e "|  2) [Moonraker]           |                           |"
  echo -e "|                           | Webcam Streamer:          |"
-  echo -e "| Klipper Webinterface:     |  7) [MJPG-Streamer]       |"
-  echo -e "|  3) [Mainsail]            |                           |"
-  echo -e "|  4) [Fluidd]              | Other:                    |"
-  echo -e "|                           |  8) [PrettyGCode]         |"
-  echo -e "| Touchscreen GUI:          |  9) [Telegram Bot]        |"
-  echo -e "|  5) [KlipperScreen]       | 10) [Obico for Klipper]   |"
-  echo -e "|                           | 11) [NGINX]               |"
+  echo -e "| Klipper Webinterface:     |  9) [Crowsnest]           |"
+  echo -e "|  3) [Mainsail]            | 10) [MJPG-Streamer]       |"
+  echo -e "|  4) [Mainsail-Config]     |                           |"
+  echo -e "|  5) [Fluidd]              | Other:                    |"
+  echo -e "|  6) [Fluidd-Config]       | 11) [PrettyGCode]         |"
+  echo -e "|                           | 12) [Telegram Bot]        |"
+  echo -e "| Touchscreen GUI:          | 13) [Obico for Klipper]   |"
+  echo -e "|  7) [KlipperScreen]       | 14) [OctoEverywhere]      |"
+  echo -e "|                           | 15) [NGINX]               |"
  back_footer
 }

@@ -45,20 +47,28 @@ function remove_menu() {
      3)
        do_action "remove_mainsail" "remove_ui";;
      4)
-        do_action "remove_fluidd" "remove_ui";;
+        do_action "remove_mainsail_config" "remove_ui";;
      5)
-        do_action "remove_klipperscreen" "remove_ui";;
+        do_action "remove_fluidd" "remove_ui";;
      6)
-        do_action "remove_octoprint" "remove_ui";;
+        do_action "remove_fluidd_config" "remove_ui";;
      7)
-        do_action "remove_mjpg-streamer" "remove_ui";;
+        do_action "remove_klipperscreen" "remove_ui";;
      8)
-        do_action "remove_prettygcode" "remove_ui";;
+        do_action "remove_octoprint" "remove_ui";;
      9)
-        do_action "remove_telegram_bot" "remove_ui";;
+        do_action "remove_crowsnest" "remove_ui";;
      10)
-        do_action "remove_moonraker_obico" "remove_ui";;
+        do_action "remove_mjpg-streamer" "remove_ui";;
      11)
+        do_action "remove_prettygcode" "remove_ui";;
+      12)
+        do_action "remove_telegram_bot" "remove_ui";;
+      13)
+        do_action "remove_moonraker_obico" "remove_ui";;
+      14)
+        do_action "remove_octoeverywhere" "remove_ui";;
+      15)
        do_action "remove_nginx" "remove_ui";;
      B|b)
        clear; main_menu; break;;
--- a/scripts/ui/settings_menu.sh
+++ b/scripts/ui/settings_menu.sh
@@ -1,7 +1,7 @@
 #!/usr/bin/env bash

 #=======================================================================#
-# Copyright (C) 2020 - 2022 Dominik Willner <th33xitus@gmail.com>       #
+# Copyright (C) 2020 - 2023 Dominik Willner <th33xitus@gmail.com>       #
 #                                                                       #
 # This file is part of KIAUH - Klipper Installation And Update Helper   #
 # https://github.com/th33xitus/kiauh                                    #
--- a/scripts/ui/update_menu.sh
+++ b/scripts/ui/update_menu.sh
@@ -1,7 +1,7 @@
 #!/usr/bin/env bash

 #=======================================================================#
-# Copyright (C) 2020 - 2022 Dominik Willner <th33xitus@gmail.com>       #
+# Copyright (C) 2020 - 2023 Dominik Willner <th33xitus@gmail.com>       #
 #                                                                       #
 # This file is part of KIAUH - Klipper Installation And Update Helper   #
 # https://github.com/th33xitus/kiauh                                    #
@@ -32,8 +32,10 @@ function update_ui() {
  echo -e "|  6) [PrettyGCode]      |$(compare_prettygcode_versions)|"
  echo -e "|  7) [Telegram Bot]     |$(compare_telegram_bot_versions)|"
  echo -e "|  8) [Obico for Klipper]|$(compare_moonraker_obico_versions)|"
+  echo -e "|  9) [OctoEverywhere]   |$(compare_octoeverywhere_versions)|"
+  echo -e "| 10) [Crowsnest]        |$(compare_crowsnest_versions)|"
  echo -e "|                        |------------------------------|"
-  echo -e "|  9) [System]           |  $(check_system_updates)   |"
+  echo -e "| 11) [System]           |  $(check_system_updates)   |"
  back_footer
 }

@@ -63,6 +65,10 @@ function update_menu() {
      8)
        do_action "update_moonraker_obico" "update_ui";;
      9)
+        do_action "update_octoeverywhere" "update_ui";;
+      10)
+        do_action "update_crowsnest" "update_ui";;
+      11)
        do_action "update_system" "update_ui";;
      a)
        do_action "update_all" "update_ui";;
@@ -114,6 +120,9 @@ function update_all() {
    [[ "${update_arr[*]}" =~ "telegram_bot" ]] && \
    echo -e "|  ${cyan}● MoonrakerTelegramBot${white}                               |"

+    [[ "${update_arr[*]}" =~ "octoeverywhere" ]] && \
+    echo -e "|  ${cyan}● OctoEverywhere${white}                                     |"
+
    [[ "${update_arr[*]}" =~ "system" ]] && \
    echo -e "|  ${cyan}● System${white}                                             |"

--- a/scripts/upload_log.sh
+++ b/scripts/upload_log.sh
@@ -1,7 +1,7 @@
 #!/usr/bin/env bash

 #=======================================================================#
-# Copyright (C) 2020 - 2022 Dominik Willner <th33xitus@gmail.com>       #
+# Copyright (C) 2020 - 2023 Dominik Willner <th33xitus@gmail.com>       #
 #                                                                       #
 # This file is part of KIAUH - Klipper Installation And Update Helper   #
 # https://github.com/th33xitus/kiauh                                    #
--- a/scripts/utilities.sh
+++ b/scripts/utilities.sh
@@ -1,7 +1,7 @@
 #!/usr/bin/env bash

 #=======================================================================#
-# Copyright (C) 2020 - 2022 Dominik Willner <th33xitus@gmail.com>       #
+# Copyright (C) 2020 - 2023 Dominik Willner <th33xitus@gmail.com>       #
 #                                                                       #
 # This file is part of KIAUH - Klipper Installation And Update Helper   #
 # https://github.com/th33xitus/kiauh                                    #
@@ -338,18 +338,6 @@ function fetch_webui_ports() {
 #=================== SYSTEM =====================#
 #================================================#

-function find_klipper_initd() {
-  local services
-  services=$(find "${INITD}" -maxdepth 1 -regextype posix-extended -regex "${INITD}/klipper(-[^0])?[0-9]*" | sort)
-  echo "${services}"
-}
-
-function find_klipper_systemd() {
-  local services
-  services=$(find "${SYSTEMD}" -maxdepth 1 -regextype posix-extended -regex "${SYSTEMD}/klipper(-[0-9a-zA-Z]+)?.service" | sort)
-  echo "${services}"
-}
-
 function create_required_folders() {
  local printer_data=${1} folders
  folders=("backup" "certs" "config" "database" "gcodes" "comms" "logs" "systemd")
@@ -597,7 +585,9 @@ function set_multi_instance_names() {

  local name
  local names=""
-  local services=$(find_klipper_systemd)
+  local services
+
+  services=$(klipper_systemd)

  ###
  # if value of 'multi_instance_names' is not an empty
@@ -639,6 +629,30 @@ function get_multi_instance_names() {
  echo "${instance_names[@]}"
 }

+###
+# helper function that returns klipper data directory
+# path based on systemd service name.
+#
+# => return an empty string if klipper is not installed
+# => return absolute config directory path
+#
+function get_data_folder() {
+  local service_name=${1}
+  local service_type=${2}
+  local instance_name
+
+  if [[ "${service_name}" == "${service_type}.service" ]]; then
+    echo "${HOME}/printer_data"
+  else
+    instance_name=$(get_instance_name "${service_name}")
+    if [[ ${instance_name} =~ ^[0-9]+$ ]]; then
+      echo "${HOME}/printer_${instance_name}_data"
+    else
+      echo "${HOME}/${instance_name}_data"
+    fi
+  fi
+}
+
 ###
 # helper function that returns all possibly available absolute
 # klipper config directory paths based on their instance name.
@@ -657,16 +671,60 @@ function get_config_folders() {
      # by KIAUH convention, all instance names of only numbers
      # need to be prefixed with 'printer_'
      if [[ ${name} =~ ^[0-9]+$ ]]; then
-        cfg_dirs+=("${KLIPPER_CONFIG}/printer_${name}")
+        cfg_dirs+=("${HOME}/printer_${name}_data/config")
      else
-        cfg_dirs+=("${KLIPPER_CONFIG}/${name}")
+        cfg_dirs+=("${HOME}/${name}_data/config")
      fi
    done
-  elif [[ -z ${instance_names} && $(find_klipper_systemd | wc -w) -gt 0 ]]; then
-    cfg_dirs+=("${KLIPPER_CONFIG}")
+  elif [[ -z ${instance_names} && $(klipper_systemd | wc -w) -gt 0 ]]; then
+    cfg_dirs+=("${HOME}/printer_data/config")
  else
    cfg_dirs=()
  fi

  echo "${cfg_dirs[@]}"
 }
+
+###
+# helper function that returns all available absolute directory paths
+# based on their instance name and specified target folder
+#
+# @param {string}: folder name - target instance folder name (e.g. config)
+#
+# => return an empty string if klipper is not installed
+# => return space-separated string of absolute directory paths
+#
+function get_instance_folder_path() {
+  local folder_name=${1}
+  local folder_paths=()
+  local instance_names
+  local path
+
+  instance_names=$(get_multi_instance_names)
+
+  if [[ -n ${instance_names} ]]; then
+    for name in ${instance_names}; do
+      ###
+      # by KIAUH convention, all instance names of only numbers
+      # need to be prefixed with 'printer_'
+      if [[ ${name} =~ ^[0-9]+$ ]]; then
+        path="${HOME}/printer_${name}_data/${folder_name}"
+        if [[ -d ${path} ]]; then
+          folder_paths+=("${path}")
+        fi
+      else
+        path="${HOME}/${name}_data/${folder_name}"
+        if [[ -d ${path} ]]; then
+          folder_paths+=("${path}")
+        fi
+      fi
+    done
+  elif [[ -z ${instance_names} && $(klipper_systemd | wc -w) -gt 0 ]]; then
+    path="${HOME}/printer_data/${folder_name}"
+    if [[ -d ${path} ]]; then
+      folder_paths+=("${path}")
+    fi
+  fi
+
+  echo "${folder_paths[@]}"
+}
Author	SHA1	Message	Date
th33xitus	70c316b512	refactor(klipper): tweak klipper install dialogs Signed-off-by: Dominik Willner <th33xitus@gmail.com>	2023-03-13 22:24:03 +01:00
th33xitus	4bbab899e7	Merge branch 'master' into install-remove-instances	2023-03-11 23:54:41 +01:00
Quinn Damerell	ae9e79c579	feat(octoeverywhere): add OE to the "update all" action (#311 )	2023-03-11 23:52:46 +01:00
th33xitus	c148b0e8ac	refactor(klipper): refactor klipper remove procedure Signed-off-by: Dominik Willner <th33xitus@gmail.com>	2023-03-11 23:51:36 +01:00
th33xitus	38090816ca	revert(klipper): revert klipper update function Signed-off-by: Dominik Willner <th33xitus@gmail.com>	2023-03-11 22:22:11 +01:00
th33xitus	1215446a6c	feat(octoeverywhere): implement update function (#310 )	2023-03-11 20:25:17 +01:00
th33xitus	2b168e2463	refactor(klipper): first refactor of klipper installation procedure Signed-off-by: Dominik Willner <th33xitus@gmail.com>	2023-03-11 12:33:05 +01:00
th33xitus	37f673dde9	revert(klipper): revert changes to run_klipper_setup Signed-off-by: Dominik Willner <th33xitus@gmail.com>	2023-03-11 12:22:20 +01:00
th33xitus	516af17df0	revert(klipper): revert changes to clone_klipper Signed-off-by: Dominik Willner <th33xitus@gmail.com>	2023-03-11 12:19:38 +01:00
th33xitus	4543ccff20	fix: fix SC2155 Signed-off-by: Dominik Willner <th33xitus@gmail.com>	2023-03-11 09:19:35 +01:00
th33xitus	4c2d834560	Merge branch 'master' into install-remove-instances	2023-03-11 09:11:09 +01:00
th33xitus	8526acf8b6	chore: update copyright notice Signed-off-by: Dominik Willner <th33xitus@gmail.com>	2023-03-10 20:06:06 +01:00
th33xitus	cc27aaec7c	readme: add prerequisites to readme (#309 )	2023-03-08 20:07:00 +01:00
Quinn Damerell	1e9493461c	feat: add OctoEverywhere for Klipper (#300 ) Co-authored-by: th33xitus <th33xitus@googlemail.com>	2023-03-05 17:19:20 +01:00
th33xitus	31616ebad5	fix(crowsnest): silence grep error output in main menu fixes #308 Signed-off-by: Dominik Willner <th33xitus@gmail.com>	2023-03-04 16:01:06 +01:00
coderus	176c44d6e4	fix(moonraker): remove init.d cleanup code	2023-02-28 22:23:03 +01:00
coderus	b11fbdb953	fix(crownest): remove errors output from menu	2023-02-28 22:22:46 +01:00
coderus	e0d65cc447	Merge branch 'master' into install-remove-instances	2023-02-28 22:21:53 +01:00
Stephan Wendel	faf56ed1b1	refactor(crowsnest): improve performance in crowsnest.sh (#306 )	2023-02-28 18:37:43 +01:00
th33xitus	d6837af2a2	refactor(klipper): implement blacklisted service names (#304 )	2023-02-28 18:29:21 +01:00
Pedro Lamas	afe6f7499a	feat(fluidd): use fluidd-config repo for downloading fluidd macros (#305 )	2023-02-28 16:33:32 +01:00
Pedro Lamas	e3ed223b5c	fix: always use system home directory (#303 )	2023-02-28 15:30:42 +01:00
th33xitus	fd27db28d4	feat(mainsail): use mainsail-config repo for downloading mainsail macros (#301 )	2023-02-26 16:29:01 +01:00
Michael Bravo	68a02ad3f5	fix(mainsail): set increased read timeout on API endpoint (#294 )	2023-02-25 12:59:31 +01:00
CODeRUS	99b7672dc9	fix(telegram bot): Fix service restart (#296 )	2023-02-14 19:40:11 +01:00
th33xitus	bb3ec79756	revert(mjpg-streamer): re-add uninstall option for mjpg-streamer fix #291 Signed-off-by: Dominik Willner <th33xitus@gmail.com>	2023-02-05 08:57:15 +01:00
Kenneth Jiang	ce595abd60	refactor(obico): remove "-s" option from moonraker-obico/install.sh invocation (#292 )	2023-02-05 08:50:06 +01:00
th33xitus	c79dc280e3	refactor(moonraker): update cors domains in moonraker.conf template Signed-off-by: Dominik Willner <th33xitus@gmail.com>	2023-02-05 08:47:46 +01:00
Stephan Wendel	7aa186e8b9	feat: replace mjpg-streamer with crowsnest (#286 ) Co-authored-by: th33xitus <th33xitus@googlemail.com>	2023-02-03 21:59:59 +01:00
coderus	7c1c1d8f21	fix(moonraker): remove print at start	2023-01-08 16:36:46 +01:00
th33xitus	8493269c6f	refactor: hide currently still disabled functions from the menus Signed-off-by: Dominik Willner <th33xitus@gmail.com>	2023-01-08 11:05:14 +01:00
coderus	00a3fbe43b	refactor(moonraker): refactor UI dialogs	2023-01-08 00:13:05 +01:00
coderus	d02fc2e01f	refactor(klipper): refactor UI dialogs	2023-01-08 00:13:00 +01:00
coderus	26d27a03ec	fix(moonraker): remove single instance	2023-01-07 20:48:22 +01:00
coderus	57e7b476fa	refactor(moonraker): install/remove single instances	2023-01-07 20:39:12 +01:00
coderus	3071e1e037	refactor(moonraker): instance installation a bit messy commit, might require more polishing	2023-01-07 17:36:52 +01:00
coderus	2b53e005e6	refactor(moonraker): funcs to get and print actual moonraker addressses with ports	2023-01-07 17:34:12 +01:00
coderus	937ad4cffd	refactor(utilities): get_data_folder function	2023-01-07 17:32:33 +01:00
coderus	40fee65bf4	refactor(moonraker): do not remove dir for clone if exists, do not reset venv	2023-01-07 17:32:07 +01:00
coderus	3b68783f3b	refactor(klipper): Install additional instances without full reinstall	2023-01-06 19:56:18 +01:00
coderus	72b5038e71	refactor(klipper): Just update venv if already exists	2023-01-06 19:56:15 +01:00
coderus	3556a009ec	refactor(klipper): Do not clone in Update if no dir exists	2023-01-06 19:54:49 +01:00
coderus	b131cf56ef	refactor(klipper): confirm instalaltion to existing instance folder	2023-01-06 15:46:51 +01:00
coderus	c07c17e8c9	refactor(python): Add default input to Python version selector	2023-01-06 15:43:59 +01:00
coderus	810fcde5c1	refactor(klipper): do not force remove and clone if already exists	2023-01-06 15:37:21 +01:00
coderus	ea5219ddc9	fix(systemd): remove RemainAfterExit from services RemainAfterExit=yes makes impossible for service to restart automatically if exited with 0 exit code	2023-01-06 15:30:22 +01:00
th33xitus	150ef0142f	refactor(mainsail/fluidd): move tag urls from globals to respective files Signed-off-by: Dominik Willner <th33xitus@gmail.com>	2022-12-14 19:40:12 +01:00
th33xitus	f70faa52cc	fix(klipper): update python dialog description Signed-off-by: Dominik Willner <th33xitus@gmail.com>	2022-12-08 19:25:58 +01:00
CODeRUS	e796f74640	refactor(klipper): recommend Python3 for Klipper installation (#246 )	2022-12-07 18:42:51 +01:00
Thomas Lété	2c9f5bed60	fix: pull mainsail.cfg from correct location (#272 )	2022-12-07 17:34:01 +01:00
th33xitus	e9c23ca93e	fix(klipper): use correct value for `py_ver` variable in update function Signed-off-by: Dominik Willner <th33xitus@gmail.com>	2022-11-14 19:50:55 +01:00
th33xitus	67afa26ed7	refactor(klipper): full refactor of klipper install/remove part (#264 )	2022-11-13 15:51:22 +01:00
th33xitus	54be7e4e21	refactor(obico): update obico installer (#254 )	2022-10-31 16:06:45 +01:00
th33xitus	811c071b74	refactor(telegram-bot): update telegram-bot installer (#251 )	2022-10-30 18:30:20 +01:00
th33xitus	6116fc92cf	fix: allow for any amount of whitespaces after config section in update manager Signed-off-by: Dominik Willner <th33xitus@gmail.com>	2022-10-30 18:27:13 +01:00
th33xitus	5524a40f04	refactor(klipperscreen): re-enable klipperscreen installer Signed-off-by: Dominik Willner <th33xitus@gmail.com>	2022-10-25 15:24:25 +02:00
th33xitus	cb3661b8b5	refactor(prettygcode): re-enable pretty gcode installer Signed-off-by: Dominik Willner <th33xitus@gmail.com>	2022-10-25 15:23:57 +02:00
th33xitus	2cec90b29c	refactor(octoprint): update octoprint installer Signed-off-by: Dominik Willner <th33xitus@gmail.com>	2022-10-24 10:35:30 +02:00
th33xitus	d2c009df9a	fix(klipper): `network.target` is now `network-online.target` Signed-off-by: Dominik Willner th33xitus@gmail.com	2022-10-22 23:28:01 +02:00
				`@@ -0,0 +1 @@`
				`TELEGRAM_BOT_ARGS="/home/%USER%/moonraker-telegram-bot/bot/main.py -c %CFG% -l %LOG%"`