Updates en afstellen bltouch

klipper/DNV-TPU-Ender3/klipper_config/printer.cfg

@@ -36,9 +36,9 @@ enable_pin: !PB14
 microsteps: 16
 rotation_distance: 40
 endstop_pin: ^PC0
-position_endstop: -13.5
-position_min: -13.5
-position_max: 221.5
+position_endstop: -14
+position_min: -14
+position_max: 195
 homing_speed: 50
 
 [tmc2209 stepper_x]
@@ -56,7 +56,7 @@ rotation_distance: 40
 endstop_pin: ^PC1
 position_endstop: -51
 position_min: -51
-position_max: 185
+position_max: 160
 homing_speed: 50
 
 [tmc2209 stepper_y]
@@ -87,7 +87,7 @@ sensor_pin: ^PC14
 control_pin: PA1
 #pin_up_reports_not_triggered: False
 #pin_up_touch_mode_reports_triggered: False
-x_offset: 33.7
+x_offset: 32.3
 y_offset: -33.5
 #z_offset: 2.68
 pin_move_time: 0.680
@@ -103,7 +103,7 @@ screw4: 29,206
 speed: 80
 horizontal_move_z: 5
 mesh_min: 25,10
-mesh_max: 200,150
+mesh_max: 228.7,126.5
 probe_count: 5,5
 
 [extruder]
@@ -215,18 +215,18 @@ shaper_type_y: ei
 #*#
 #*# [extruder]
 #*# control = pid
-#*# pid_kp = 30.552
-#*# pid_ki = 2.289
-#*# pid_kd = 101.966
+#*# pid_kp = 31.285
+#*# pid_ki = 2.343
+#*# pid_kd = 104.414
 #*#
 #*# [heater_bed]
 #*# control = pid
-#*# pid_kp = 61.642
-#*# pid_ki = 0.561
-#*# pid_kd = 1694.375
+#*# pid_kp = 63.394
+#*# pid_ki = 0.394
+#*# pid_kd = 2550.799
 #*#
 #*# [bltouch]
-#*# z_offset = 2.675
+#*# z_offset = 2.935
 #*#
 #*# [stepper_z]
 #*#