mirror of
https://github.com/joBr99/nspanel-lovelace-ui.git
synced 2025-12-19 22:24:15 +01:00
63 lines
3.0 KiB
Markdown
63 lines
3.0 KiB
Markdown
# Flash Tasmota to your NSPanel
|
|
|
|
You need to connect to your nspanel via serial and flash tasmota [tasmota32-nspanel.bin](http://ota.tasmota.com/tasmota32/release/tasmota32-nspanel.bin) to your NSPanel.
|
|
You can use the Tasmota Web Installer to do so. [Tasmota Web Installer](https://tasmota.github.io/install/)
|
|
|
|
Checkout Blakadders Template Repo for more information on flashing, do not use the autoexec.be from this page.
|
|
[NSPanel Page of the Tasmota Template Repository](https://templates.blakadder.com/sonoff_NSPanel.html)
|
|
|
|
If you prefer EspHome over Tasmota, you can use this thrid party esphome component, which is replacing tasmota and the berry driver of this project.
|
|
[ESPHome component](https://github.com/sairon/esphome-nspanel-lovelace-ui)
|
|
|
|
|
|
## Configure Tasmota Template for NSPanel
|
|
|
|
Configure the NSPanel template for Tasmota. (Go to Configuration and Configure Other and paste the template there, make sure to tick the activate checkbox)
|
|
|
|
|
|
|
|
You can use the following template or copy the one on the [Tasmota Template Repo Site](https://templates.blakadder.com/sonoff_NSPanel.html).
|
|
|
|
`{"NAME":"NSPanel","GPIO":[0,0,0,0,3872,0,0,0,0,0,32,0,0,0,0,225,0,480,224,1,0,0,0,33,0,0,0,0,0,0,0,0,0,0,4736,0],"FLAG":0,"BASE":1,"CMND":"ADCParam 2,11200,10000,3950 | Sleep 0 | BuzzerPWM 1"}`
|
|
|
|
After a reboot of tasmota your screen will light up with the stock display firmware.
|
|
|
|
## Upload Berry Driver to Tasmota
|
|
|
|
Go to `Consoles` > `Console` in Tasmota and execute the following command:
|
|
|
|
```
|
|
Backlog UrlFetch https://raw.githubusercontent.com/joBr99/nspanel-lovelace-ui/main/tasmota/autoexec.be; Restart 1
|
|
```
|
|
|
|
This will download the autoexec.be file from the repository and restart tasmota.
|
|
|
|
## Flash Firmware to Nextion Screen
|
|
|
|
Due the limitations of Berry, it's not possible to download the tft file directly from github, so I'm also renting a small server where you can download the file via HTTP.
|
|
|
|
Use the one following commands in the tasmota console (not berry console) to flash the latest release from this repository:
|
|
|
|
EU Version: `FlashNextion http://nspanel.pky.eu/lui-release.tft`
|
|
|
|
US Version Portrait: `FlashNextion http://nspanel.pky.eu/lui-us-p-release.tft`
|
|
|
|
US Version Landscape: `FlashNextion http://nspanel.pky.eu/lui-us-l-release.tft`
|
|
|
|
After sending the command, the screen should show a progress bar. The flashing progress takes around 5 minutes.
|
|
|
|
Note: For the US Version Users - keep in mind that you need to add the model config option to your apps.yaml later, more details on config overview page
|
|
|
|
|
|
<details>
|
|
<summary>Alternatively you can use your own webserver or the one build into HomeAssistant:</summary>
|
|
<br>
|
|
Upload the nspanel.tft from the lastest release to a Webserver (for example www folder of Home Assistant) and execute the following command in Tasmota Console. (Development Version: [tft file from HMI folder](HMI/nspanel.tft))
|
|
|
|
**Webserver must be HTTP, HTTPS is not supported, due to limitations of berry lang on tasmota**
|
|
|
|
`FlashNextion http://ip-address-of-your-homeassistant:8123/local/nspanel.tft`
|
|
</details>
|
|
|
|
|