jake-b ae6c16422f mcp4018: Add SET_DIGIPOT command to mcp4018 implementation (#5737) ...

Added a SET_DIGIPOT command to the mcp4018 implementation.
Previously the mcp4018 was read only, and set at the time of
configuration.  This allows you to change the value during a
print, which is needed for some older printers that need to
lower the stepper current during preheating.

Signed-off-by: Jake Bordens <jake@allaboutjake.com>

2022-09-02 10:30:06 -04:00

4.5 KiB

Raw Blame History

View Raw