redstone99 14eec15267 safe_z_home: Fix final z hop to use relative z coordinates (#5879) ...

After a G28 z-axis homing, there is a final z hop.
It was hoping to height z_hop as an absolute z height rather than relative.

If the z-axis home leaves the head at a z height higher than z_hop,
e.g. because you were using a probe to do z homing,
this meant that it was z hopping in the negative z direction, which
could result in crashing the toolhead.

Signed-off-by: Joshua Redstone <redstone@gmail.com>

2022-11-22 18:55:43 -05:00

4.0 KiB

Raw Blame History

View Raw