|
|
|
|
@@ -1,67 +1,74 @@
|
|
|
|
|
# (EN) Blueprint | Setup and Description of the Blueprint
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
## This article is covering the settings in the Blueprint Automation.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This section is covering the settings in the Blueprint Automation.
|
|
|
|
|
The Blueprint Automation is the central configuration piece of this solution for the NSPanel.
|
|
|
|
|
|
|
|
|
|
In principal, setting up the automation is self explaining. Below you will find an explanation of each configuration point of the Blueprint.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
# Parameter:
|
|
|
|
|
1. ESPhome Node Name: This refers to the ESPhome device_name. Important note: please use an underscore for the name.
|
|
|
|
|
# Parameter
|
|
|
|
|
1. **ESPhome Node Name:** Refers to the ESPhome device name. Allowed characters are a-z, 0-9, but no special characters or spaces. This is a restriction by HA, since the respective Entity_IDs are generated from the device name of the blueprint.
|
|
|
|
|
|
|
|
|
|
2. Language for NSPanel: Language selection. Currently we support EN and DE.
|
|
|
|
|
|
|
|
|
|
3. Nextion TFT File Folder: Can be left blank and is only required if you would like to use an individual configarion, e.g. when using a custom build TFT file.
|
|
|
|
|
|
|
|
|
|
4. Delay: If the WiFi signal is weak, it can happen that menus are not loaded completely. If this happens, please increase the delay in 5ms incremeents and verify that the pages are loading correctly.
|
|
|
|
|
|
|
|
|
|
5. Synchronisation of all all values: Light and Cover pages are being refreshed continuously (can lead the flickering)
|
|
|
|
|
|
|
|
|
|
6. Synchronisation of all all Sliders: Light and Cover pages are being refreshed continuously (can lead the flickering)
|
|
|
|
|
|
|
|
|
|
7. Weather Integration: You can select between HA own weather instance or if you want to select the more accurate AccuWeather.
|
|
|
|
|
|
|
|
|
|
8. Name Weather: If using Accuweather, the name of the Accuweather integration needs to be put here.
|
|
|
|
|
|
|
|
|
|
9. Outdoor Temperature: You can use your own outside temperature sensor. If you choose not to, the value of the weather app will be used.
|
|
|
|
|
|
|
|
|
|
10. Humidity Sensor: Optional outside humidity sensor.
|
|
|
|
|
|
|
|
|
|
11. Hot Water Temperatur Sensor: Optional hot water sensor.
|
|
|
|
|
|
|
|
|
|
12. Hot Water Switch: Optional warm water switch for boiler.
|
|
|
|
|
|
|
|
|
|
13. Top 04 Flame: This indicates a flame symbol on the first page, e.g. if a climate is being switched on.
|
|
|
|
|
|
|
|
|
|
14. Climate to Control: This leads to a climate which needs to be set up in HA first. This can be accessed on the NSPanel via the temperature on the home screen.
|
|
|
|
|
|
|
|
|
|
15. Climate Control optimistic Mode: Depending on the climate control being used, you might want to switch to optimistic mode.
|
|
|
|
|
|
|
|
|
|
16. Left Button Switch: Left Hardware Button of NSPanel
|
|
|
|
|
|
|
|
|
|
17. Name Left Button Switch: Name above the left hardware switch (Home Screen)
|
|
|
|
|
|
|
|
|
|
18. Right Button Switch: Right Hardware Button NSPanel
|
|
|
|
|
|
|
|
|
|
19. Name Right Button Switch: Name above the right hardware switch (Home Screen)
|
|
|
|
|
|
|
|
|
|
2. **Language for NSPanel:** The language can be selected via dropdown menu. Currently 26 languages are supported.
|
|
|
|
|
3. **Nextion TFT File Folder:** Can be left blank. But it is needed if you want to use your own TFT configuration.
|
|
|
|
|
4. **Delay**: Weak WiFi signal can lead to screens not being loaded completely. If this happens, a delay in 5ms steps can be set here to compensate for this.
|
|
|
|
|
5. **Synchronization of all all values:** Light and cover pages (values) are updated continuously (can lead to flickering).
|
|
|
|
|
6. **Synchronization of all sliders:** light and cover pages (cover position) are updated continuously (can cause flickering).
|
|
|
|
|
7. **Weather Integration:** Choose between HA Weather Integration or the more accurate Accuweather.
|
|
|
|
|
8. **Name Weather:** Dropdown menu to select the weather entity to use. Example: If "Accuweather" is selected in option 7, the entity for Accuweather must be selected here.
|
|
|
|
|
9. **Outdoor Temperature:** Optionally the value of an outdoor temperature sensor can be used here. If no separate sensor is used, the value of the weather integration is used.
|
|
|
|
|
10. **Humidity Sensor:** Optional outdoor humidity sensor.
|
|
|
|
|
11. **Hot Water Temperature Sensor:** Optional hot water sensor.
|
|
|
|
|
12. **Hot Water Switch:** Optional hot water switch, e.g. for a boiler.
|
|
|
|
|
13. **Top 04 Flame:** Displays a flame symbol on the home screen, e.g. when a therme is switched on (On).
|
|
|
|
|
14. **Climate to Control:** If a Climate Integration is to be controlled, it must be entered here. This can then be accessed via the temperature on the home screen of the NSPanel.
|
|
|
|
|
15. **Climate Control optimistic Mode:** Depending on the climate control, the optimistic mode can be used for a better response.
|
|
|
|
|
16. **Left Button Switch:** Left Hardware Button of the NSPanel.
|
|
|
|
|
17. **Name Left Button Switch:** Text on the screen above the left hardware button (Home Screen).
|
|
|
|
|
18. **Right Button Switch:** Right Hardware Button of the NSPanel.
|
|
|
|
|
19. **Name Right Button Switch:** Text on the screen above the right hardware button (Home Screen).
|
|
|
|
|
20. **Name Button Page 1- 4:** Text on the respective Button Screens.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
**Buttons 01-32**
|
|
|
|
|
The buttons can be reached by swiping to the right on the home screen and are identical in their function.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The buttons are numbered as follows:
|
|
|
|
|
|
|
|
|
|
| | Button Page 1 | Button Page 2 | Button Page 3 | Button Page 4 |
|
|
|
|
|
| ----- | ------------- | ------------- | ------------- | ------------- |
|
|
|
|
|
| Row 1 | 01 02 03 04 | 09 10 11 12 | 17 18 19 20 | 25 26 27 28 |
|
|
|
|
|
| Row 2 | 05 06 07 08 | 13 14 15 16 | 21 22 23 24 | 29 30 31 32 |
|
|
|
|
|
|
|
|
|
|
The following entities can be stored:
|
|
|
|
|
|
|
|
|
|
- Light
|
|
|
|
|
- Switch
|
|
|
|
|
- Cover
|
|
|
|
|
- Input Boolean
|
|
|
|
|
- Automation
|
|
|
|
|
- Button
|
|
|
|
|
- Input Button
|
|
|
|
|
- Scene
|
|
|
|
|
- Person
|
|
|
|
|
- Script
|
|
|
|
|
- Binary Sensor
|
|
|
|
|
- Fan
|
|
|
|
|
|
|
|
|
|
If the respective button is pressed, the corresponding page is automatically opened, e.g. the cover control for covers, etc.
|
|
|
|
|
A name can be set optionally for each button.
|
|
|
|
|
|
|
|
|
|
All buttons offer the possibility to optionally confirm the execution of the action. This can be activated or deactivated separately for each button via "Confirm execution of the button press".
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
##Button 1-32
|
|
|
|
|
The buttons can be reached by swiping to the right and are completely identical in function
|
|
|
|
|
Button 1 is located on the far left and Button 32 on the far right.
|
|
|
|
|
Entities with the property Light, Switch, Cover, Input Boolean, Automation, Button, Input Button, Scene and Person can be used.
|
|
|
|
|
When the button is pressed, the correct setting page is automatically called.
|
|
|
|
|
A name for each button can be specified.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
***
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
hollabee