Updated (EN) Common Issues TFT Upload When nspanel lovelace ui has been installed (markdown)

(EN)-Common-Issues-TFT-Upload-When-nspanel-lovelace-ui-has-been-installed.md

@@ -1,18 +1 @@
-> _**in the version "nspanel-lovelace-ui" from joBr99 are a few special features built in, which make it not so easy to flash a new version and TFT on the NSPanel. But since we already had this problem, we have of course already a solution for you ;)**_
+This page was moved: https://github.com/Blackymas/NSPanel_HA_Blueprint/blob/main/docs/lovelace_ui.md
-
-### _**It is necessary to upload a "Blank TFT" file while "Lovelace ui" is still installed on the NSPanel.**_
-
-> IMPORTANT! If you have already installed the NSPanel with my version, you must first fully install "Lovelace ui" again.
-
-### The following steps are necessary:
-
-1. download the file _**"nspanel_blank.tft"**_ from the folder _**custom_configuration**_.
-2. now upload the TFT file _**"nspanel_blank.tft"**_ to the folder _**"www"**_ in Home Assistant
-3. now go to the item _**"Developer tools --> Services"**_ and search there for the services
-   
-_**"ESPHome: DEVICE_NAME_upload_tft"**_  --> (esphome.device_name_upload_tft)
-4. under URL you have to enter the path to your file _**nspanel_blank.tft**_. This could look like this
-_**"http://IP_HOME_ASSISTANT:8123/local/nspanel_blank.tft"**_
-5. now the TFT file should be played on the NSPanel. It may take a moment until it is ready
-6. If everything worked, you should see only a QR code on the NSPanel.
-7. now you can continue with the setup and configuration of my version. For this see [Short version of the setup of Esphome and Blueprint](https://github.com/Blackymas/NSPanel_HA_Blueprint/wiki/(EN)-First-Steps---Installation-and-Setup#1-short-version-of-the-setup-of-esphome-and-blueprint)