From 3d76fbafeec470530528971a1ce05d11d9ff271f Mon Sep 17 00:00:00 2001 From: Edward Firmo <94725493+edwardtfn@users.noreply.github.com> Date: Thu, 11 Jan 2024 18:32:56 +0100 Subject: [PATCH] Updated (EN) Common Issues TFT Upload When nspanel lovelace ui has been installed (markdown) --- ...-nspanel-lovelace-ui-has-been-installed.md | 19 +------------------ 1 file changed, 1 insertion(+), 18 deletions(-) diff --git a/(EN)-Common-Issues-TFT-Upload-When-nspanel-lovelace-ui-has-been-installed.md b/(EN)-Common-Issues-TFT-Upload-When-nspanel-lovelace-ui-has-been-installed.md index da63884..5d28d75 100644 --- a/(EN)-Common-Issues-TFT-Upload-When-nspanel-lovelace-ui-has-been-installed.md +++ b/(EN)-Common-Issues-TFT-Upload-When-nspanel-lovelace-ui-has-been-installed.md @@ -1,18 +1 @@ -> _**in the version "nspanel-lovelace-ui" from joBr99 are a few special features built in, which make it not so easy to flash a new version and TFT on the NSPanel. But since we already had this problem, we have of course already a solution for you ;)**_ - -### _**It is necessary to upload a "Blank TFT" file while "Lovelace ui" is still installed on the NSPanel.**_ - -> IMPORTANT! If you have already installed the NSPanel with my version, you must first fully install "Lovelace ui" again. - -### The following steps are necessary: - -1. download the file _**"nspanel_blank.tft"**_ from the folder _**custom_configuration**_. -2. now upload the TFT file _**"nspanel_blank.tft"**_ to the folder _**"www"**_ in Home Assistant -3. now go to the item _**"Developer tools --> Services"**_ and search there for the services -  -_**"ESPHome: DEVICE_NAME_upload_tft"**_ --> (esphome.device_name_upload_tft) -4. under URL you have to enter the path to your file _**nspanel_blank.tft**_. This could look like this -_**"http://IP_HOME_ASSISTANT:8123/local/nspanel_blank.tft"**_ -5. now the TFT file should be played on the NSPanel. It may take a moment until it is ready -6. If everything worked, you should see only a QR code on the NSPanel. -7. now you can continue with the setup and configuration of my version. For this see [Short version of the setup of Esphome and Blueprint](https://github.com/Blackymas/NSPanel_HA_Blueprint/wiki/(EN)-First-Steps---Installation-and-Setup#1-short-version-of-the-setup-of-esphome-and-blueprint) \ No newline at end of file +This page was moved: https://github.com/Blackymas/NSPanel_HA_Blueprint/blob/main/docs/lovelace_ui.md \ No newline at end of file