fixes #82

Fix weather override

HMI/README.md

@@ -71,6 +71,8 @@ change the page type:
 
 `pageType,popupNotify`
 
+`pageType,screensaver`
+
 ### screensaver page
 
 `weatherUpdate,? tMainIcon? tMainText? tMRIcon? tMR? tForecast1? tF1Icon? tForecast1Val? tForecast2? tF2Icon? tForecast2Val`
@@ -117,7 +119,7 @@ The following message can be used to update the content on the cardEntities Page
 
 `entityUpdateDetail,*internalName*,*tHeading*,*tHeadingColor*,*b1*,*tB1Color*,*b2*,*tB2Color*,*tText*,*tTextColor*,*sleepTimeout*`
 
-`popupExit`
+`exitPopup`
 
 ### cardThermo Page
 
@@ -136,20 +138,27 @@ The following message can be used to update the content on the cardEntities Page
 
 ## Messages from Nextion Display
 
+`event,buttonPress2,pageName,bNext`
+
+`event,buttonPress2,pageName,bPrev`
+
+`event,buttonPress2,pageName,bExit`
+
 ### startup page
 
 `event,startup,version`
 
 ### screensaver page
 
-`event,screensaverOpen`
+`event,buttonPress2,screensaver,exit` - Touch Event on Screensaver
+
+`event,screensaverOpen` - Screensaver has opened
+
 
 ### cardEntities Page
 
 `event,*eventName*,*entityName*,*actionName*,*optionalValue*`
 
-`event,pageOpen,0`
-
 `event,buttonPress2,internalNameEntity,up`
 
 `event,buttonPress2,internalNameEntity,down`
@@ -186,8 +195,6 @@ The following message can be used to update the content on the cardEntities Page
 
 ### cardThermo Page
 
-`event,pageOpen,0`
-
 `event,buttonPress2,*entityName*,tempUpd,*temperature*`
 
 `event,buttonPress2,*entityName*,hvac_action,*hvac_action*`

HMI/n2t-out/Program.s.txt

@@ -5,24 +5,11 @@ Program.s
     int recvCrc=0
     int payloadLength=0
     int par0=0,par1=0
-    // landsspace orientation x has 480px and y has 320px xy limits todo: adjust xy values to something that fit's resulution
-    //Maximum values in directional change for Swipes beeing detected as swipe (diagonal swipes are invalid) (for one axis at a time)
-    int xLimit=125,yLimit=125
-    int ixLimit=-125,iyLimit=-125
-    //Minimum values for swipes, directional changes below theese values are ignored, because they could be unintended swipes
-    int xLimitMin=80,yLimitMin=80
-    int ixLimitMin=-80,iyLimitMin=-80
-    // Swipe Result Vars
-    int ycR=0,xcR=0
-    // Start End Swipe Touch Locations
-    int yc1=0,xc1=0,yc2=0,xc2=0
     // sleep timeout in s
     int sleepTimeout=20
     int sleepValue=0
     // dim value
     int dimValue=40
-    // current page
-    int nPage=0
     // fix touch offset
     lcd_dev fffb 0002 0000 0020
     page pageStartup

HMI/n2t-out/cardAlarm.txt

@@ -324,14 +324,7 @@ Button bNext
     
     Events
         Touch Press Event
-            nPage=nPage+1
+            tSend.txt="event,buttonPress2,cardAlarm,bNext"
-            nPageDisp.val=nPage
-            //page open event
-            // event,pageOpen,cardEntities,pageNumber
-            // craft command
-            // convert pageNumber and write to tTmp
-            covx nPage,tTmp.txt,0,0
-            tSend.txt="event,pageOpen,"+tTmp.txt
             //send calc crc
             btlen tSend.txt,sys0
             crcrest 1,0xffff // reset CRC
@@ -378,14 +371,7 @@ Button bPrev
     
     Events
         Touch Press Event
-            nPage=nPage-1
+            tSend.txt="event,buttonPress2,cardAlarm,bPrev"
-            nPageDisp.val=nPage
-            //page open event
-            // event,pageOpen,cardEntities,pageNumber
-            // craft command
-            // convert pageNumber and write to tTmp
-            covx nPage,tTmp.txt,0,0
-            tSend.txt="event,pageOpen,"+tTmp.txt
             //send calc crc
             btlen tSend.txt,sys0
             crcrest 1,0xffff // reset CRC

HMI/n2t-out/cardEntities.txt

@@ -1131,13 +1131,14 @@ Button bPrev
     
     Events
         Touch Press Event
-            nPage=nPage-1
+            tSend.txt="event,buttonPress2,cardEntities,"
-            //page open event
+            if(bPrev.isbr==1)
-            // event,pageOpen,cardEntities,pageNumber
+            {
-            // craft command
+                tSend.txt+="bBack"
-            // convert pageNumber and write to tTmp
+            }else
-            covx nPage,tTmp.txt,0,0
+            {
-            tSend.txt="event,pageOpen,"+tTmp.txt
+                tSend.txt+="bPrev"
+            }
             //send calc crc
             btlen tSend.txt,sys0
             crcrest 1,0xffff // reset CRC
@@ -1184,13 +1185,7 @@ Button bNext
     
     Events
         Touch Press Event
-            nPage=nPage+1
+            tSend.txt="event,buttonPress2,cardEntities,bNext"
-            //page open event
-            // event,pageOpen,cardEntities,pageNumber
-            // craft command
-            // convert pageNumber and write to tTmp
-            covx nPage,tTmp.txt,0,0
-            tSend.txt="event,pageOpen,"+tTmp.txt
             //send calc crc
             btlen tSend.txt,sys0
             crcrest 1,0xffff // reset CRC
@@ -1776,6 +1771,27 @@ Timer tmSerial
                                     if(tInstruction.txt=="entityUpdHeading")
                                     {
                                         spstr strCommand.txt,tHeading.txt,",",1
+                                        spstr strCommand.txt,tTmp.txt,",",2
+                                        if(tTmp.txt=="0")
+                                        {
+                                            vis bPrev,0
+                                        }else
+                                        {
+                                            vis bPrev,1
+                                            if(tTmp.txt=="2")
+                                            {
+                                                bPrev.txt=""
+                                                bPrev.isbr=1
+                                            }
+                                        }
+                                        spstr strCommand.txt,tTmp.txt,",",3
+                                        if(tTmp.txt=="0")
+                                        {
+                                            vis bNext,0
+                                        }else
+                                        {
+                                            vis bNext,1
+                                        }
                                     }
                                     if(tInstruction.txt=="entityUpd")
                                     {
@@ -1784,7 +1800,7 @@ Timer tmSerial
                                         spstr strCommand.txt,type1.txt,",",1
                                         // get internal name
                                         spstr strCommand.txt,entn1.txt,",",2
-                                        if(type1.txt=="delete")
+                                        if(type1.txt=="delete"||type1.txt=="")
                                         {
                                             vis bUp1,0
                                             vis bStop1,0
@@ -1871,7 +1887,7 @@ Timer tmSerial
                                         spstr strCommand.txt,type2.txt,",",7
                                         // get internal name
                                         spstr strCommand.txt,entn2.txt,",",8
-                                        if(type2.txt=="delete")
+                                        if(type2.txt=="delete"||type2.txt=="")
                                         {
                                             vis bUp2,0
                                             vis bStop2,0
@@ -1958,7 +1974,7 @@ Timer tmSerial
                                         spstr strCommand.txt,type3.txt,",",13
                                         // get internal name
                                         spstr strCommand.txt,entn3.txt,",",14
-                                        if(type3.txt=="delete")
+                                        if(type3.txt=="delete"||type3.txt=="")
                                         {
                                             vis bUp3,0
                                             vis bStop3,0
@@ -2045,7 +2061,7 @@ Timer tmSerial
                                         spstr strCommand.txt,type4.txt,",",19
                                         // get internal name
                                         spstr strCommand.txt,entn4.txt,",",20
-                                        if(type4.txt=="delete")
+                                        if(type4.txt=="delete"||type4.txt=="")
                                         {
                                             vis bUp4,0
                                             vis bStop4,0

HMI/n2t-out/cardGrid.txt

@@ -515,13 +515,7 @@ Button bPrev
     
     Events
         Touch Press Event
-            nPage=nPage-1
+            tSend.txt="event,buttonPress2,cardGrid,bPrev"
-            //page open event
-            // event,pageOpen,cardEntities,pageNumber
-            // craft command
-            // convert pageNumber and write to tTmp
-            covx nPage,tTmp.txt,0,0
-            tSend.txt="event,pageOpen,"+tTmp.txt
             //send calc crc
             btlen tSend.txt,sys0
             crcrest 1,0xffff // reset CRC
@@ -568,13 +562,7 @@ Button bNext
     
     Events
         Touch Press Event
-            nPage=nPage+1
+            tSend.txt="event,buttonPress2,cardGrid,bNext"
-            //page open event
-            // event,pageOpen,cardEntities,pageNumber
-            // craft command
-            // convert pageNumber and write to tTmp
-            covx nPage,tTmp.txt,0,0
-            tSend.txt="event,pageOpen,"+tTmp.txt
             //send calc crc
             btlen tSend.txt,sys0
             crcrest 1,0xffff // reset CRC

HMI/n2t-out/cardMedia.txt

@@ -23,55 +23,24 @@ Page cardMedia
             vis p0,0
             vis tSend,0
             vis tInstruction,0
-            vis nPageDisp,0
             vis tTmp,0
             vis tId,0
             //vis nPageDisp,0
         
 Variable (string) strCommand
     Attributes
-        ID            : 8
+        ID            : 7
         Scope         : local
         Text          : 
         Max. Text Size: 200
     
 Variable (string) entn
     Attributes
-        ID            : 19
+        ID            : 18
         Scope         : local
         Text          : 
         Max. Text Size: 50
     
-Number nPageDisp
-    Attributes
-        ID                                  : 6
-        Scope                               : local
-        Dragging                            : 0
-        Disable release event after dragging: 0
-        Send Component ID                   : disabled
-        Opacity                             : 127
-        x coordinate                        : 426
-        y coordinate                        : 0
-        Width                               : 42
-        Height                              : 24
-        Effect                              : load
-        Effect Priority                     : 0
-        Effect Time                         : 300
-        Fill                                : solid color
-        Style                               : flat
-        Associated Keyboard                 : none
-        Font ID                             : 0
-        Back. Color                         : 65535
-        Font Color                          : 0
-        Horizontal Alignment                : center
-        Vertical Alignment                  : center
-        Value                               : 0
-        Significant digits shown            : all
-        Format                              : decimal
-        Word wrap                           : enabled
-        Horizontal Spacing                  : 0
-        Vertical Spacing                    : 0
-    
 Text tSend
     Attributes
         ID                                  : 2
@@ -134,7 +103,7 @@ Text tTmp
     
 Text tInstruction
     Attributes
-        ID                                  : 9
+        ID                                  : 8
         Scope                               : local
         Dragging                            : 0
         Disable release event after dragging: 0
@@ -164,7 +133,7 @@ Text tInstruction
     
 Text tId
     Attributes
-        ID                                  : 10
+        ID                                  : 9
         Scope                               : local
         Dragging                            : 0
         Disable release event after dragging: 0
@@ -194,7 +163,7 @@ Text tId
     
 Text tHeading
     Attributes
-        ID                                  : 11
+        ID                                  : 10
         Scope                               : local
         Dragging                            : 0
         Disable release event after dragging: 0
@@ -224,7 +193,7 @@ Text tHeading
     
 Text tTitle
     Attributes
-        ID                                  : 12
+        ID                                  : 11
         Scope                               : local
         Dragging                            : 0
         Disable release event after dragging: 0
@@ -254,7 +223,7 @@ Text tTitle
     
 Text tAuthor
     Attributes
-        ID                                  : 13
+        ID                                  : 12
         Scope                               : local
         Dragging                            : 0
         Disable release event after dragging: 0
@@ -284,7 +253,7 @@ Text tAuthor
     
 Text t2
     Attributes
-        ID                                  : 14
+        ID                                  : 13
         Scope                               : local
         Dragging                            : 0
         Disable release event after dragging: 0
@@ -333,7 +302,7 @@ Text t2
         
 Text tPlayPause
     Attributes
-        ID                                  : 15
+        ID                                  : 14
         Scope                               : local
         Dragging                            : 0
         Disable release event after dragging: 0
@@ -382,7 +351,7 @@ Text tPlayPause
         
 Text t0
     Attributes
-        ID                                  : 16
+        ID                                  : 15
         Scope                               : local
         Dragging                            : 0
         Disable release event after dragging: 0
@@ -431,7 +400,7 @@ Text t0
         
 Text tIcon
     Attributes
-        ID                                  : 18
+        ID                                  : 17
         Scope                               : local
         Dragging                            : 0
         Disable release event after dragging: 0
@@ -459,6 +428,106 @@ Text tIcon
         Horizontal Spacing                  : 0
         Vertical Spacing                    : 0
     
+Text t1
+    Attributes
+        ID                                  : 22
+        Scope                               : local
+        Dragging                            : 0
+        Disable release event after dragging: 0
+        Send Component ID                   : disabled
+        Opacity                             : 127
+        x coordinate                        : 5
+        y coordinate                        : 222
+        Width                               : 50
+        Height                              : 50
+        Effect                              : load
+        Effect Priority                     : 0
+        Effect Time                         : 300
+        Fill                                : solid color
+        Style                               : flat
+        Associated Keyboard                 : none
+        Font ID                             : 2
+        Back. Color                         : 6371
+        Font Color                          : 50712
+        Horizontal Alignment                : center
+        Vertical Alignment                  : center
+        Input Type                          : character
+        Text                                : 
+        Max. Text Size                      : 10
+        Word wrap                           : disabled
+        Horizontal Spacing                  : 0
+        Vertical Spacing                    : 0
+    
+    Events
+        Touch Press Event
+            hVolume.val=hVolume.val-5
+            // event,buttonPress2,internalNameEntity,volumeSlider,50
+            //craft command
+            tSend.txt="event,buttonPress2,"+entn.txt+",volumeSlider,"
+            covx hVolume.val,tTmp.txt,0,0
+            tSend.txt+=tTmp.txt
+            //send calc crc
+            btlen tSend.txt,sys0
+            crcrest 1,0xffff // reset CRC
+            crcputh 55 bb
+            crcputs sys0,1
+            crcputs tSend.txt,0
+            //send cmd
+            printh 55 bb
+            prints sys0,2
+            prints tSend.txt,0
+            prints crcval,2
+        
+Text t3
+    Attributes
+        ID                                  : 23
+        Scope                               : local
+        Dragging                            : 0
+        Disable release event after dragging: 0
+        Send Component ID                   : disabled
+        Opacity                             : 127
+        x coordinate                        : 397
+        y coordinate                        : 222
+        Width                               : 50
+        Height                              : 50
+        Effect                              : load
+        Effect Priority                     : 0
+        Effect Time                         : 300
+        Fill                                : solid color
+        Style                               : flat
+        Associated Keyboard                 : none
+        Font ID                             : 2
+        Back. Color                         : 6371
+        Font Color                          : 50712
+        Horizontal Alignment                : center
+        Vertical Alignment                  : center
+        Input Type                          : character
+        Text                                : 
+        Max. Text Size                      : 10
+        Word wrap                           : disabled
+        Horizontal Spacing                  : 0
+        Vertical Spacing                    : 0
+    
+    Events
+        Touch Press Event
+            hVolume.val=hVolume.val+5
+            // event,buttonPress2,internalNameEntity,volumeSlider,50
+            //craft command
+            tSend.txt="event,buttonPress2,"+entn.txt+",volumeSlider,"
+            covx hVolume.val,tTmp.txt,0,0
+            tSend.txt+=tTmp.txt
+            //send calc crc
+            btlen tSend.txt,sys0
+            crcrest 1,0xffff // reset CRC
+            crcputh 55 bb
+            crcputs sys0,1
+            crcputs tSend.txt,0
+            //send cmd
+            printh 55 bb
+            prints sys0,2
+            prints tSend.txt,0
+            prints crcval,2
+        
 Picture p0
     Attributes
         ID                                  : 1
@@ -478,13 +547,13 @@ Picture p0
     
 Slider hVolume
     Attributes
-        ID                                  : 17
+        ID                                  : 16
         Scope                               : local
         Dragging                            : 0
         Disable release event after dragging: 0
         Send Component ID                   : disabled
         Opacity                             : 127
-        x coordinate                        : 61
+        x coordinate                        : 59
         y coordinate                        : 227
         Width                               : 335
         Height                              : 43
@@ -503,6 +572,8 @@ Slider hVolume
     
     Events
         Touch Release Event
+            tmCooldown.en=1
+            tmCooldown.tim=100
             // event,buttonPress2,internalNameEntity,volumeSlider,50
             //craft command
             tSend.txt="event,buttonPress2,"+entn.txt+",volumeSlider,"
@@ -554,14 +625,7 @@ Button bNext
     
     Events
         Touch Press Event
-            nPage=nPage+1
+            tSend.txt="event,buttonPress2,cardMedia,bNext"
-            nPageDisp.val=nPage
-            //page open event
-            // event,pageOpen,cardEntities,pageNumber
-            // craft command
-            // convert pageNumber and write to tTmp
-            covx nPage,tTmp.txt,0,0
-            tSend.txt="event,pageOpen,"+tTmp.txt
             //send calc crc
             btlen tSend.txt,sys0
             crcrest 1,0xffff // reset CRC
@@ -608,14 +672,7 @@ Button bPrev
     
     Events
         Touch Press Event
-            nPage=nPage-1
+            tSend.txt="event,buttonPress2,cardMedia,bPrev"
-            nPageDisp.val=nPage
-            //page open event
-            // event,pageOpen,cardEntities,pageNumber
-            // craft command
-            // convert pageNumber and write to tTmp
-            covx nPage,tTmp.txt,0,0
-            tSend.txt="event,pageOpen,"+tTmp.txt
             //send calc crc
             btlen tSend.txt,sys0
             crcrest 1,0xffff // reset CRC
@@ -630,7 +687,7 @@ Button bPrev
         
 Timer tmSerial
     Attributes
-        ID         : 7
+        ID         : 6
         Scope      : local
         Period (ms): 50
         Enabled    : yes
@@ -791,7 +848,7 @@ Timer tmSerial
         
 Timer tmSleep
     Attributes
-        ID         : 20
+        ID         : 19
         Scope      : local
         Period (ms): 1000
         Enabled    : yes
@@ -809,9 +866,20 @@ Timer tmSleep
                 }
             }
         
+Timer tmCooldown
+    Attributes
+        ID         : 21
+        Scope      : local
+        Period (ms): 100
+        Enabled    : no
+    
+    Events
+        Timer Event
+            tmCooldown.en=0
+        
 TouchCap tc0
     Attributes
-        ID   : 21
+        ID   : 20
         Scope: local
         Value: 0
     

HMI/n2t-out/cardThermo.txt

@@ -559,14 +559,7 @@ Button bNext
     
     Events
         Touch Press Event
-            nPage=nPage+1
+            tSend.txt="event,buttonPress2,cardThermo,bNext"
-            nPageDisp.val=nPage
-            //page open event
-            // event,pageOpen,cardEntities,pageNumber
-            // craft command
-            // convert pageNumber and write to tTmp
-            covx nPage,tTmp.txt,0,0
-            tSend.txt="event,pageOpen,"+tTmp.txt
             //send calc crc
             btlen tSend.txt,sys0
             crcrest 1,0xffff // reset CRC
@@ -721,14 +714,7 @@ Button bPrev
     
     Events
         Touch Press Event
-            nPage=nPage-1
+            tSend.txt="event,buttonPress2,cardThermo,bPrev"
-            nPageDisp.val=nPage
-            //page open event
-            // event,pageOpen,cardEntities,pageNumber
-            // craft command
-            // convert pageNumber and write to tTmp
-            covx nPage,tTmp.txt,0,0
-            tSend.txt="event,pageOpen,"+tTmp.txt
             //send calc crc
             btlen tSend.txt,sys0
             crcrest 1,0xffff // reset CRC

HMI/n2t-out/nspanel_Stats.txt

@@ -1,66 +1,62 @@
 Program.s
 	0    Component(s)
-	17   Line(s) of event code
+	10   Line(s) of event code
-	17   Unique line(s) of event code
+	10   Unique line(s) of event code
 pageIcons
 	6    Component(s)
 	0    Line(s) of event code
 	0    Unique line(s) of event code
+pageTest
+	13   Component(s)
+	13   Line(s) of event code
+	13   Unique line(s) of event code
 pageSerialTest
 	13   Component(s)
 	48   Line(s) of event code
 	43   Unique line(s) of event code
-popupNotify
-	17   Component(s)
-	180  Line(s) of event code
-	119  Unique line(s) of event code
-pageStartup
-	19   Component(s)
-	146  Line(s) of event code
-	111  Unique line(s) of event code
-cardMedia
-	22   Component(s)
-	200  Line(s) of event code
-	115  Unique line(s) of event code
-pageSwipeTest
-	18   Component(s)
-	62   Line(s) of event code
-	44   Unique line(s) of event code
 popupShutter
 	19   Component(s)
-	180  Line(s) of event code
+	179  Line(s) of event code
-	103  Unique line(s) of event code
+	102  Unique line(s) of event code
-pageTest
+popupNotify
-	14   Component(s)
+	17   Component(s)
-	14   Line(s) of event code
+	179  Line(s) of event code
-	14   Unique line(s) of event code
+	118  Unique line(s) of event code
-popupLight
+pageStartup
-	26   Component(s)
+	19   Component(s)
-	304  Line(s) of event code
+	150  Line(s) of event code
-	167  Unique line(s) of event code
+	113  Unique line(s) of event code
-screensaver
-	25   Component(s)
-	173  Line(s) of event code
-	124  Unique line(s) of event code
-cardThermo
-	42   Component(s)
-	412  Line(s) of event code
-	221  Unique line(s) of event code
-cardGrid
-	39   Component(s)
-	382  Line(s) of event code
-	221  Unique line(s) of event code
-cardEntities
-	54   Component(s)
-	728  Line(s) of event code
-	317  Unique line(s) of event code
 cardAlarm
 	35   Component(s)
-	259  Line(s) of event code
+	253  Line(s) of event code
-	163  Unique line(s) of event code
+	160  Unique line(s) of event code
+popupLight
+	27   Component(s)
+	323  Line(s) of event code
+	173  Unique line(s) of event code
+cardGrid
+	39   Component(s)
+	378  Line(s) of event code
+	219  Unique line(s) of event code
+cardThermo
+	42   Component(s)
+	406  Line(s) of event code
+	218  Unique line(s) of event code
+cardEntities
+	54   Component(s)
+	752  Line(s) of event code
+	330  Unique line(s) of event code
+cardMedia
+	24   Component(s)
+	222  Line(s) of event code
+	116  Unique line(s) of event code
+screensaver
+	26   Component(s)
+	176  Line(s) of event code
+	127  Unique line(s) of event code
 
 Total
-	14   Page(s)
+	13   Page(s)
-	349  Component(s)
+	334  Component(s)
-	3105 Line(s) of event code
+	3089 Line(s) of event code
-	827  Unique line(s) of event code
+	817  Unique line(s) of event code

HMI/n2t-out/pageStartup.txt

@@ -402,7 +402,7 @@ Text tVersion
         Horizontal Alignment                : center
         Vertical Alignment                  : center
         Input Type                          : character
-        Text                                : 16
+        Text                                : 19
         Max. Text Size                      : 10
         Word wrap                           : disabled
         Horizontal Spacing                  : 0
@@ -592,6 +592,10 @@ Timer tmSerial
                                         {
                                             page cardThermo
                                         }
+                                        if(tId.txt=="screensaver")
+                                        {
+                                            page screensaver
+                                        }
                                         if(tId.txt=="popupLight")
                                         {
                                             pageIcons.tTmp1.txt=tTmp.txt

HMI/n2t-out/pageTest.txt

@@ -111,45 +111,9 @@ Button b1
         Touch Press Event
             page pageSerialTest
         
-Button b2
-    Attributes
-        ID                                  : 4
-        Scope                               : local
-        Dragging                            : 0
-        Disable release event after dragging: 0
-        Send Component ID                   : disabled
-        Opacity                             : 127
-        x coordinate                        : 7
-        y coordinate                        : 265
-        Width                               : 100
-        Height                              : 50
-        Effect                              : load
-        Effect Priority                     : 0
-        Effect Time                         : 300
-        Fill                                : solid color
-        Style                               : 3D auto
-        Font ID                             : 4
-        Back. Color                         : 50712
-        Back. Picture ID (Pressed)          : 65535
-        Back. Color (Pressed)               : 1024
-        Font Color (Unpressed)              : 0
-        Font Color (Pressed)                : 65535
-        Horizontal Alignment                : center
-        Vertical Alignment                  : center
-        State                               : unpressed
-        Text                                : swipe
-        Max. Text Size                      : 10
-        Word wrap                           : disabled
-        Horizontal Spacing                  : 0
-        Vertical Spacing                    : 0
-    
-    Events
-        Touch Press Event
-            page pageSwipeTest
-        
 Button b3
     Attributes
-        ID                                  : 5
+        ID                                  : 4
         Scope                               : local
         Dragging                            : 0
         Disable release event after dragging: 0
@@ -185,7 +149,7 @@ Button b3
         
 Button b6
     Attributes
-        ID                                  : 6
+        ID                                  : 5
         Scope                               : local
         Dragging                            : 0
         Disable release event after dragging: 0
@@ -221,7 +185,7 @@ Button b6
         
 Button b4
     Attributes
-        ID                                  : 7
+        ID                                  : 6
         Scope                               : local
         Dragging                            : 0
         Disable release event after dragging: 0
@@ -257,7 +221,7 @@ Button b4
         
 Button b5
     Attributes
-        ID                                  : 8
+        ID                                  : 7
         Scope                               : local
         Dragging                            : 0
         Disable release event after dragging: 0
@@ -293,7 +257,7 @@ Button b5
         
 Button b7
     Attributes
-        ID                                  : 9
+        ID                                  : 8
         Scope                               : local
         Dragging                            : 0
         Disable release event after dragging: 0
@@ -329,7 +293,7 @@ Button b7
         
 Button b8
     Attributes
-        ID                                  : 10
+        ID                                  : 9
         Scope                               : local
         Dragging                            : 0
         Disable release event after dragging: 0
@@ -366,7 +330,7 @@ Button b8
         
 Button b9
     Attributes
-        ID                                  : 11
+        ID                                  : 10
         Scope                               : local
         Dragging                            : 0
         Disable release event after dragging: 0
@@ -402,7 +366,7 @@ Button b9
         
 Button b10
     Attributes
-        ID                                  : 12
+        ID                                  : 11
         Scope                               : local
         Dragging                            : 0
         Disable release event after dragging: 0
@@ -438,7 +402,7 @@ Button b10
         
 Button b11
     Attributes
-        ID                                  : 13
+        ID                                  : 12
         Scope                               : local
         Dragging                            : 0
         Disable release event after dragging: 0

HMI/n2t-out/popupLight.txt

@@ -500,6 +500,8 @@ Slider hBrightness
     
     Events
         Touch Release Event
+            tmCooldown.en=1
+            tmCooldown.tim=200
             //craft command
             tSend.txt="event,buttonPress2,"+entn.txt+",brightnessSlider,"
             covx hBrightness.val,tTmp.txt,0,0
@@ -543,6 +545,8 @@ Slider hTempSlider
     
     Events
         Touch Release Event
+            tmCooldown.en=1
+            tmCooldown.tim=200
             //craft command
             tSend.txt="event,buttonPress2,"+entn.txt+",colorTempSlider,"
             covx hTempSlider.val,tTmp.txt,0,0
@@ -593,12 +597,7 @@ Button b0
     
     Events
         Touch Press Event
-            //page open event
+            tSend.txt="event,buttonPress2,popupLight,bExit"
-            // event,pageOpen,cardEntities,pageNumber
-            // craft command
-            // convert pageNumber and write to tTmp
-            covx nPage,tTmp.txt,0,0
-            tSend.txt="event,pageOpen,"+tTmp.txt
             //send calc crc
             btlen tSend.txt,sys0
             crcrest 1,0xffff // reset CRC
@@ -815,7 +814,10 @@ Timer tmSerial
                                             vis t2,1
                                             vis hBrightness,1
                                             covx tTmp.txt,sys0,0,0
-                                            hBrightness.val=sys0
+                                            if(tmCooldown.en==0)
+                                            {
+                                                hBrightness.val=sys0
+                                            }
                                         }
                                         // get ColorTemp value
                                         spstr strCommand.txt,tTmp.txt,",",5
@@ -844,10 +846,15 @@ Timer tmSerial
                                             }
                                         }else
                                         {
-                                            mode_temp.val=0
+                                            mode_temp.val=1
                                             vis hTempSlider,1
                                             vis t3,1
                                             vis t4,1
+                                            if(tmCooldown.en==0)
+                                            {
+                                                covx tTmp.txt,sys0,0,0
+                                                hTempSlider.val=sys0
+                                            }
                                             // mode == 0 is rgb controls currently shown
                                             if(mode.val==0)
                                             {
@@ -867,7 +874,11 @@ Timer tmSerial
                                         }else
                                         {
                                             vis t0,1
-                                            vis bColor,1
+                                            //only enable bColor button if color temp is also supported
+                                            if(mode_temp.val==1)
+                                            {
+                                                vis bColor,1
+                                            }
                                             if(mode.val==0)
                                             {
                                                 vis pColorWheel,1
@@ -945,6 +956,17 @@ Timer tmSerial
                 }
             }
         
+Timer tmCooldown
+    Attributes
+        ID         : 26
+        Scope      : local
+        Period (ms): 100
+        Enabled    : no
+    
+    Events
+        Timer Event
+            tmCooldown.en=0
+        
 TouchCap tc0
     Attributes
         ID   : 14

HMI/n2t-out/popupNotify.txt

@@ -278,12 +278,7 @@ Button b0
     Events
         Touch Press Event
             sleepTimeout=vaOldSleepT.val
-            //page open event
+            tSend.txt="event,buttonPress2,popupNotify,bExit"
-            // event,pageOpen,cardEntities,pageNumber
-            // craft command
-            // convert pageNumber and write to tTmp
-            covx nPage,tTmp.txt,0,0
-            tSend.txt="event,pageOpen,"+tTmp.txt
             //send calc crc
             btlen tSend.txt,sys0
             crcrest 1,0xffff // reset CRC

HMI/n2t-out/popupShutter.txt

@@ -364,12 +364,7 @@ Button b0
     
     Events
         Touch Press Event
-            //page open event
+            tSend.txt="event,buttonPress2,popupShutter,bExit"
-            // event,pageOpen,cardEntities,pageNumber
-            // craft command
-            // convert pageNumber and write to tTmp
-            covx nPage,tTmp.txt,0,0
-            tSend.txt="event,pageOpen,"+tTmp.txt
             //send calc crc
             btlen tSend.txt,sys0
             crcrest 1,0xffff // reset CRC

HMI/n2t-out/screensaver.txt

@@ -27,12 +27,28 @@ Page screensaver
             vis tTmp,0
             vis p0,0
             //load gloabl time string from pageIcons
-            tTime.txt=vaTime.txt
+            //tTime.txt=vaTime.txt
+            spstr vaTime.txt,tTime.txt,"?",0
+            spstr vaTime.txt,tAMPM.txt,"?",1
+            if(tAMPM.txt=="")
+            {
+                vis tAMPM,0
+            }
             tDate.txt=vaDate.txt
             dim=dimValue
             vis tSend,0
             //page open event
-            // craft command
+            // clear weather elements, to keep example content in HMI
+            tMainIcon.txt=""
+            tMainText.txt=""
+            tMRIcon.txt=""
+            tMR.txt=""
+            tForecast1.txt=""
+            tF1Icon.txt=""
+            tForecast1Val.txt=""
+            tForecast2.txt=""
+            tF2Icon.txt=""
+            tForecast2Val.txt=""
             tSend.txt="event,screensaverOpen"
             //send calc crc
             btlen tSend.txt,sys0
@@ -45,17 +61,6 @@ Page screensaver
             prints sys0,2
             prints tSend.txt,0
             prints crcval,2
-            // clear weather elements, to keep example content in HMI
-            tMainIcon.txt=""
-            tMainText.txt=""
-            tMRIcon.txt=""
-            tMR.txt=""
-            tForecast1.txt=""
-            tF1Icon.txt=""
-            tForecast1Val.txt=""
-            tForecast2.txt=""
-            tF2Icon.txt=""
-            tForecast2Val.txt=""
         
 Variable (string) strCommand
     Attributes
@@ -69,7 +74,7 @@ Variable (string) vaTime
         ID            : 10
         Scope         : global
         Text          : 
-        Max. Text Size: 10
+        Max. Text Size: 15
     
 Variable (string) vaDate
     Attributes
@@ -200,7 +205,7 @@ Text tTime
         Vertical Alignment                  : center
         Input Type                          : character
         Text                                : 21:32   
-        Max. Text Size                      : 10
+        Max. Text Size                      : 15
         Word wrap                           : disabled
         Horizontal Spacing                  : 0
         Vertical Spacing                    : 0
@@ -260,7 +265,7 @@ Text tSend
         Vertical Alignment                  : center
         Input Type                          : character
         Text                                : 
-        Max. Text Size                      : 25
+        Max. Text Size                      : 50
         Word wrap                           : disabled
         Horizontal Spacing                  : 0
         Vertical Spacing                    : 0
@@ -595,6 +600,36 @@ Text t10
         Horizontal Spacing                  : 0
         Vertical Spacing                    : 0
     
+Text tAMPM
+    Attributes
+        ID                                  : 25
+        Scope                               : local
+        Dragging                            : 0
+        Disable release event after dragging: 0
+        Send Component ID                   : disabled
+        Opacity                             : 127
+        x coordinate                        : 343
+        y coordinate                        : 48
+        Width                               : 104
+        Height                              : 57
+        Effect                              : load
+        Effect Priority                     : 0
+        Effect Time                         : 300
+        Fill                                : solid color
+        Style                               : flat
+        Associated Keyboard                 : none
+        Font ID                             : 3
+        Back. Color                         : 0
+        Font Color                          : 65535
+        Horizontal Alignment                : center
+        Vertical Alignment                  : center
+        Input Type                          : character
+        Text                                : PM
+        Max. Text Size                      : 10
+        Word wrap                           : disabled
+        Horizontal Spacing                  : 0
+        Vertical Spacing                    : 0
+    
 Picture p0
     Attributes
         ID                                  : 1
@@ -680,7 +715,12 @@ Timer tmSerial
                                     {
                                         //get set time to global variable
                                         spstr strCommand.txt,vaTime.txt,",",1
-                                        tTime.txt=vaTime.txt
+                                        spstr vaTime.txt,tTime.txt,"?",0
+                                        spstr vaTime.txt,tAMPM.txt,"?",1
+                                        if(tAMPM.txt=="")
+                                        {
+                                            vis tAMPM,0
+                                        }
                                     }
                                     if(tInstruction.txt=="date")
                                     {
@@ -725,14 +765,6 @@ Timer tmSerial
                                         //tForecast2Val
                                         spstr strCommand.txt,tForecast2Val.txt,"?",10
                                     }
-                                    if(tInstruction.txt=="page")
-                                    {
-                                        //pagenumber
-                                        spstr strCommand.txt,tTmp.txt,",",1
-                                        covx tTmp.txt,sys0,0,0
-                                        nPage=sys0
-                                        //don't send current page number, wake will do
-                                    }
                                     if(tInstruction.txt=="pageType")
                                     {
                                         dim=100
@@ -804,12 +836,7 @@ TouchCap tc0
     
     Events
         Touch Press Event
-            //page open event
+            tSend.txt="event,buttonPress2,screensaver,bExit"
-            // event,pageOpen,cardEntities,pageNumber
-            // craft command
-            // convert pageNumber and write to tTmp
-            covx nPage,tTmp.txt,0,0
-            tSend.txt="event,pageOpen,"+tTmp.txt
             //send calc crc
             btlen tSend.txt,sys0
             crcrest 1,0xffff // reset CRC

README.md

@@ -202,7 +202,7 @@ Due the limitations of Berry, it's not possible to download the tft file directl
 
 The following Link has always the latest version from this repository, just execute the following Command in Tasmota:
 
-`FlashNextion http://nspanel.pky.eu/lui.tft`
+`FlashNextion http://nspanel.pky.eu/lui-release.tft`
 
 ## Configuration
 
@@ -244,26 +244,25 @@ Confiure your NSPanel as you like, you need to edit the `apps.yaml` inside of yo
 You can have multiple nspanel sections.
 
 ```yaml
+---
 nspanel-1:
   module: nspanel-lovelace-ui
   class: NsPanelLovelaceUIManager
   config:
     panelRecvTopic: "tele/tasmota_your_mqtt_topic/RESULT"
     panelSendTopic: "cmnd/tasmota_your_mqtt_topic/CustomSend"
-    updateMode: auto-notify # possible values are auto, auto-notify and manual
+    timeoutScreensaver: 20
-    timeoutScreensaver: 15 #in seconds
     #brightnessScreensaver: 10
     brightnessScreensaver:
       - time: "7:00:00"
         value: 10
       - time: "23:00:00"
         value: 0
-    locale: "de_DE" # only used if babel python package is installed
+    locale: "de_DE"
-    dateFormatBabel: "full" # only used if babel python package is installed
+    dateFormatBabel: "full"
-                            # formatting options on https://babel.pocoo.org/en/latest/dates.html?highlight=name%20of%20day#date-fields
     timeFormat: "%H:%M"
     dateFormat: "%A, %d. %B %Y" # ignored if babel python package is installed
-    weatherEntity: weather.example
+    weather: weather.example
     pages:
       - type: cardEntities
         heading: Example Page 1
@@ -309,9 +308,39 @@ key | optional | type | default | description
 `class` | False | string | | The name of the Class.
 `config` | False | complex | | Config/Mapping between Homeassistant and your NsPanel
 
-### Override Icons
+Possible configuration values for config key:
 
-To override Icons of entities you can configure an icon name in your configuration, please see the following example.
+key | optional | type | default | description
+-- | -- | -- | -- | --
+`panelRecvTopic` | False | string | `tele/tasmota_your_mqtt_topic/RESULT` | The mqtt topic used to receive messages. 
+`panelSendTopic` | False | string | `cmnd/tasmota_your_mqtt_topic/CustomSend` | The mqtt topic used to send messages. 
+`timeoutScreensaver` | True | integer | `20` | Timeout for the screen to enter screensaver, to disable screensaver use 0
+`brightnessScreensaver` | True | integer/complex | `20` | Brightness for the screen to enter screensaver, see example below for complex/scheduled config.
+`brightnessScreensaverTracking` | True | string | None | Forces screensaver brightness to 0 in case entity state is not_home, can be a group, person or device_tracker entity.
+`locale` | True | string | `en_US` | Used by babel to determinante Date format on screensaver, also used for localization.
+`dateFormatBabel` | True | string | `full` | formatting options on https://babel.pocoo.org/en/latest/dates.html?highlight=name%20of%20day#date-fields
+`timeFormat` | True | string | `%H:%M` | Time Format on screensaver. Substring after `?` is displayed in a seperate smaller textbox. Useful for 12h time format with AM/PM  `"%I:%M   ?%p"`
+`dateFormat` | True | string | `%A, %d. %B %Y` | date format used if babel is not installed
+`weather` | True | string | `weather.example` | weather entity from homeassistant
+`weatherOverrideForecast1` | True | string | `None` | sensor entity from home assistant here to override the first weather forecast item on the screensaver
+`weatherOverrideForecast2` | True | string | `None` | sensor entity from home assistant here to override the second weather forecast item on the screensaver
+`pages` | False | complex | | configuration for pages on panel
+
+#### Schedule screensaver brightness
+
+It is possible to schedule a brightness change for the screen at specific times.
+
+```yaml
+    brightnessScreensaver:
+      - time: "7:00:00"
+        value: 10
+      - time: "23:00:00"
+        value: 0
+```
+
+#### Override Icons or Names
+
+To override Icons or Names of entities you can configure an icon and/or name in your configuration, please see the following example.
 Only the icons listed in the [Icon Table](HMI#icons-ids) are useable.
 
 ```yaml
@@ -322,6 +351,7 @@ Only the icons listed in the [Icon Table](HMI#icons-ids) are useable.
           - light.schreibtischlampe
           - switch.deckenbeleuchtung_hinten:
               icon: lightbulb
+              name: Lampe
           - delete
           - delete
       - type: cardMedia

appdaemon/apps.yaml

@@ -1,12 +1,12 @@
 ---
-nspanel:
+nspanel-1:
   module: nspanel-lovelace-ui
   class: NsPanelLovelaceUIManager
   config:
     panelRecvTopic: "tele/tasmota_your_mqtt_topic/RESULT"
     panelSendTopic: "cmnd/tasmota_your_mqtt_topic/CustomSend"
-    updateMode: auto-notify # possible values are auto, auto-notify and manual
+    updateMode: "auto-notify"
-    timeoutScreensaver: 15 #in seconds
+    timeoutScreensaver: 20
     #brightnessScreensaver: 10
     brightnessScreensaver:
       - time: "7:00:00"
@@ -18,7 +18,7 @@ nspanel:
                             # formatting options on https://babel.pocoo.org/en/latest/dates.html?highlight=name%20of%20day#date-fields
     timeFormat: "%H:%M"
     dateFormat: "%A, %d. %B %Y" # ignored if babel python package is installed
-    weatherEntity: weather.example
+    weather: weather.example
     pages:
       - type: cardEntities
         heading: Example Page 1
@@ -56,4 +56,3 @@ nspanel:
       - type: cardMedia
         heading: Exampe Media
         item: media_player.spotify_user
-

apps/nspanel-lovelace-ui/luibackend/config.py

@@ -0,0 +1,157 @@
+import logging
+
+LOGGER = logging.getLogger(__name__)
+
+class PageNode(object):
+    def __init__(self, data, parent=None):
+        self.data = data
+        self.name = None
+        self.childs = []
+        self.parent = parent
+        self.pos = None
+
+        if "items" in data:
+            childs = data.pop("items")
+            for page in childs:
+                self.add_child(PageNode(page, self))
+
+        name  = self.data.get("heading", "unkown") if type(self.data) is dict else self.data
+        ptype = self.data.get("type", "unkown") if type(self.data) is dict else "leaf"
+
+        self.name = f"{ptype}.{name}" if type(self.data) is dict else self.data
+        self.name  = self.name.replace(".","_")
+        self.name  = self.name.replace(",","_")
+        self.name  = self.name.replace(" ","_")
+
+    def add_child(self, obj):
+        obj.pos = len(self.childs)
+        self.childs.append(obj)
+
+    def next(self):
+        if self.parent is not None:
+            pos    = self.pos
+            length = len(self.parent.childs)
+            return self.parent.childs[(pos+1)%length]
+        else:
+            return self
+    def prev(self):
+        if self.parent is not None:
+            pos    = self.pos
+            length = len(self.parent.childs)
+            return self.parent.childs[(pos-1)%length]
+        else:
+            return self
+
+    def search_page_by_name(self, name):
+        name = name.replace("navigate.", "")
+        pages = []
+        for i in self.childs:
+            # compare name of current page
+            if i.name == name:
+                pages.append(i)
+            # current pages has also childs
+            if len(i.childs) > 0:
+                pages.extend(i.search_page_by_name(name))
+        return pages
+
+        return items
+
+    def dump(self, indent=0):
+        """dump tree to string"""
+        tab = '    '*(indent-1) + ' |- ' if indent > 0 else ''
+        name   = self.name
+        parent = self.parent.name if self.parent is not None else "root"
+        dumpstring = f"{tab}{self.pos}:{name} -> {parent} \n"
+        for obj in self.childs:
+            dumpstring += obj.dump(indent + 1)
+        return dumpstring
+    
+    def get_items(self):
+        items = []
+        for i in self.childs:
+            if len(i.childs) > 0:
+                items.append(f"navigate.{i.name}")
+            else:
+                items.append(i.data)
+        return items
+
+    def get_all_item_names(self, recursive=True):
+        items = []
+        # current page
+        if type(self.data) is dict:
+            items.append(self.data.get("item", next(iter(self.data))))
+        else:
+            items.append(self.data)
+        # childs of page
+        for i in self.childs:
+            if len(i.childs) > 0:
+                if recursive:
+                    items.extend(i.get_all_item_names())
+            else:
+                if type(i.data) is dict:
+                    items.append(i.data.get("item", next(iter(i.data))))
+                else:
+                    items.append(i.data)
+        return items
+    
+class LuiBackendConfig(object):
+
+    _DEFAULT_CONFIG = {
+        'panelRecvTopic': "tele/tasmota_your_mqtt_topic/RESULT",
+        'panelSendTopic': "cmnd/tasmota_your_mqtt_topic/CustomSend",
+        'updateMode': "auto-notify",
+        'timeoutScreensaver': 20,
+        'brightnessScreensaver': 20,
+        'brightnessScreensaverTracking': None,
+        'locale': "en_US",
+        'timeFormat': "%H:%M",
+        'dateFormatBabel': "full",
+        'dateFormat': "%A, %d. %B %Y",
+        'weather': 'weather.example',
+        'weatherOverrideForecast1': None,
+        'weatherOverrideForecast2': None,
+        'pages': [{
+            'type': 'cardEntities',
+            'heading': 'Test Entities 1',
+            'items': ['switch.test_item', 'switch.test_item', 'switch.test_item']
+            }, {
+            'type': 'cardGrid',
+            'heading': 'Test Grid 1',
+            'items': ['switch.test_item', 'switch.test_item', 'switch.test_item']
+            }
+        ]
+    }
+
+    def __init__(self, args=None, check=True):
+        self._config = {}
+        self._page_config = None
+        
+        if args:
+            self.load(args)
+
+        if check:
+            self.check()
+
+    def load(self, args):
+        for k, v in args.items():
+            if k in self._DEFAULT_CONFIG:
+                self._config[k] = v
+        LOGGER.info(f"Loaded config: {self._config}")
+
+        root_page = {"items": self.get("pages"), "type": "internal", "heading": "root"}
+        self._page_config = PageNode(root_page)
+
+        LOGGER.info(f"Parsed Page config to the following Tree: \n {self._page_config.dump()}")
+
+    def check(self):
+        return
+
+    def get(self, name):
+        value = self._config.get(name)
+        if value is None:
+            value = self._DEFAULT_CONFIG.get(name)
+        return value
+
+    def get_root_page(self):
+        return self._page_config
+

apps/nspanel-lovelace-ui/luibackend/controller.py

@@ -0,0 +1,209 @@
+import logging
+import datetime
+from helper import scale, pos_to_color
+
+from pages import LuiPagesGen
+
+LOGGER = logging.getLogger(__name__)
+
+class LuiController(object):
+
+    def __init__(self, ha_api, config, send_mqtt_msg):
+        self._ha_api = ha_api
+        self._config = config
+        self._send_mqtt_msg = send_mqtt_msg
+
+        # first child of root page (default, after startup)
+        self._current_page = self._config._page_config.childs[0]
+        
+        self._pages_gen = LuiPagesGen(ha_api, config, send_mqtt_msg)
+
+        # send panel back to startup page on restart of this script
+        self._pages_gen.page_type("pageStartup")
+        
+        # time update callback
+        time = datetime.time(0, 0, 0)
+        ha_api.run_minutely(self._pages_gen.update_time, time)
+
+        # weather callback
+        weather_interval = 15 * 60 # 15 minutes
+        ha_api.run_every(self.weather_update, "now", weather_interval)
+
+        # register callbacks
+        self.register_callbacks()
+
+        # register callbacks for each time
+        if type(self._config.get("brightnessScreensaver")) == list:
+            for index, timeset in enumerate(self._config.get("brightnessScreensaver")):
+                self._ha_api.run_daily(self.update_screensaver_brightness, timeset["time"], value=timeset["value"])
+        
+        # calculate current brightness
+        self.current_screensaver_brightness = self.calc_current_screensaver_brightness()
+
+        # call update_screensaver_brightness on changes of entity configured in brightnessScreensaverTracking
+        bst = self._config.get("brightnessScreensaverTracking")
+        if bst is not None and self._ha_api.entity_exists(bst):
+            self._ha_api.listen_state(self.update_screensaver_brightness, entity_id=bst,  value=self.current_screensaver_brightness)
+
+    def startup(self):
+        LOGGER.info(f"Startup Event")
+        # send time and date on startup
+        self._pages_gen.update_time("")
+        self._pages_gen.update_date("")
+
+        # set screensaver timeout
+        timeout = self._config.get("timeoutScreensaver")
+        self._send_mqtt_msg(f"timeout,{timeout}")
+        
+        # set current screensaver brightness
+        self.update_screensaver_brightness(kwargs={"value": self.current_screensaver_brightness})
+        
+        # send panel to screensaver
+        self._pages_gen.page_type("screensaver")
+        self.weather_update("")
+
+    def update_screensaver_brightness(self, kwargs):
+        bst = self._config.get("brightnessScreensaverTracking")
+        if bst is not None and self._ha_api.entity_exists(bst) and self._ha_api.get_entity(bst).state == "not_home":
+            self.current_screensaver_brightness = 0
+        else:
+            self.current_screensaver_brightness = kwargs['value']
+        self._send_mqtt_msg(f"dimmode,{self.current_screensaver_brightness}")
+
+    def calc_current_screensaver_brightness(self):
+        current_screensaver_brightness = 20
+        # set brightness of screensaver
+        if type(self._config.get("brightnessScreensaver")) == int:
+            current_screensaver_brightness = self._config.get("brightnessScreensaver")
+        elif type(self._config.get("brightnessScreensaver")) == list:
+            sorted_timesets = sorted(self._config.get("brightnessScreensaver"), key=lambda d: self._ha_api.parse_time(d['time']))
+            # calc current screensaver brightness
+            found_current_dim_value = False
+            for index, timeset in enumerate(sorted_timesets):
+                LOGGER.info("Current time %s", self._ha_api.get_now().time())
+                if self._ha_api.parse_time(timeset["time"]) > self._ha_api.get_now().time() and not found_current_dim_value:
+                    # first time after current time, set dim value
+                    current_screensaver_brightness = sorted_timesets[index-1]["value"]
+                    LOGGER.info("Setting dim value to %s", sorted_timesets[index-1])
+                    found_current_dim_value = True
+                # still no dim value
+                if not found_current_dim_value:
+                    self.current_screensaver_brightness = sorted_timesets[-1]["value"]
+        return current_screensaver_brightness
+
+    def weather_update(self, kwargs):
+        we_name = self._config.get("weather")
+        unit    = "°C"
+        self._pages_gen.update_screensaver_weather(kwargs={"weather": we_name, "unit": unit})
+
+    def register_callbacks(self):
+        items = self._config.get_root_page().get_all_item_names()
+        LOGGER.debug(f"Registering callbacks for the following items: {items}")
+        for item in items:
+            if self._ha_api.entity_exists(item):
+                self._ha_api.listen_state(self.state_change_callback, entity_id=item, attribute="all")
+
+    def state_change_callback(self, entity, attribute, old, new, kwargs):
+        LOGGER.debug(f"Got callback for: {entity}")
+        LOGGER.debug(f"Current page has the following items: {self._current_page.get_items()}")
+        if entity in self._current_page.get_all_item_names(recursive=False):
+            LOGGER.debug(f"Callback Entity is on current page: {entity}")
+            self._pages_gen.render_page(self._current_page, send_page_type=False)
+            # send detail page update, just in case
+            if self._current_page.data.get("type", "unknown") in ["cardGrid", "cardEntities"]:
+                if entity.startswith("light"):
+                    self._pages_gen.generate_light_detail_page(entity)
+                if entity.startswith("cover"):
+                    self._pages_gen.generate_shutter_detail_page(entity)
+
+
+    def detail_open(self, detail_type, entity_id):
+        if detail_type == "popupShutter":
+            self._pages_gen.generate_shutter_detail_page(entity_id)
+        if detail_type == "popupLight":
+            self._pages_gen.generate_light_detail_page(entity_id)
+
+    def button_press(self, entity_id, button_type, value):
+        LOGGER.info(f"Button Press Event; entity_id: {entity_id}; button_type: {button_type}; value: {value} ")
+        # internal buttons
+        if entity_id == "screensaver" and button_type == "enter":
+            self._pages_gen.render_page(self._current_page)
+        if button_type == "bExit":
+            self._pages_gen.render_page(self._current_page)
+
+        if button_type == "bNext":
+            self._current_page = self._current_page.next()
+            self._pages_gen.render_page(self._current_page)
+        if button_type == "bPrev":
+            self._current_page = self._current_page.prev()
+            self._pages_gen.render_page(self._current_page)
+        
+        elif entity_id == "updateDisplayNoYes" and value == "no":
+            self._pages_gen.render_page(self._current_page)
+
+        # buttons with actions on HA
+        if button_type == "OnOff":
+            if value == "1":
+                self._ha_api.turn_on(entity_id)
+            else:
+                self._ha_api.turn_off(entity_id)
+
+        # for shutter / covers
+        if button_type == "up":
+            self._ha_api.get_entity(entity_id).call_service("open_cover")
+        if button_type == "stop":
+            self._ha_api.get_entity(entity_id).call_service("stop_cover")
+        if button_type == "down":
+            self._ha_api.get_entity(entity_id).call_service("close_cover")
+        if button_type == "positionSlider":
+            pos = int(value)
+            self._ha_api.get_entity(entity_id).call_service("set_cover_position", position=pos)
+
+        if button_type == "button":
+            if entity_id.startswith('navigate'):
+                # internal for navigation to nested pages
+                self._current_page = self._config.get_root_page().search_page_by_name(entity_id)[0]
+                self._pages_gen.render_page(self._current_page)
+            elif entity_id.startswith('scene'):
+                self._ha_api.get_entity(entity_id).call_service("turn_on")
+            elif entity_id.startswith('light') or entity_id.startswith('switch') or entity_id.startswith('input_boolean'):
+                self._ha_api.get_entity(entity_id).call_service("toggle")
+            else:
+                self._ha_api.get_entity(entity_id).call_service("press")
+
+        # for media page
+        if button_type == "media-next":
+            self._ha_api.get_entity(entity_id).call_service("media_next_track")
+        if button_type == "media-back":
+            self._ha_api.get_entity(entity_id).call_service("media_previous_track")
+        if button_type == "media-pause":
+            self._ha_api.get_entity(entity_id).call_service("media_play_pause")
+        if button_type == "hvac_action":
+            self._ha_api.get_entity(entity_id).call_service("set_hvac_mode", hvac_mode=value)
+        if button_type == "volumeSlider":
+            pos = int(value)
+            # HA wants this value between 0 and 1 as float
+            pos = pos/100
+            self._ha_api.get_entity(entity_id).call_service("volume_set", volume_level=pos)
+
+        # for light detail page
+        if button_type == "brightnessSlider":
+            # scale 0-100 to ha brightness range
+            brightness = int(scale(int(value),(0,100),(0,255)))
+            self._ha_api.get_entity(entity_id).call_service("turn_on", brightness=brightness)
+        if button_type == "colorTempSlider":
+            entity = self._ha_api.get_entity(entity_id)
+            #scale 0-100 from slider to color range of lamp
+            color_val = scale(int(value), (0, 100), (entity.attributes.min_mireds, entity.attributes.max_mireds))
+            self._ha_api.get_entity(entity_id).call_service("turn_on", color_temp=color_val)
+        if button_type == "colorWheel":
+            self._ha_api.log(value)
+            value = value.split('|')
+            color = pos_to_color(int(value[0]), int(value[1]))
+            self._ha_api.log(color)
+            self._ha_api.get_entity(entity_id).call_service("turn_on", rgb_color=color)
+        
+        # for climate page
+        if button_type == "tempUpd":
+            temp = int(value)/10
+            self._ha_api.get_entity(entity_id).call_service("set_temperature", temperature=temp)

apps/nspanel-lovelace-ui/luibackend/helper.py

@@ -10,6 +10,7 @@ def scale(val, src, dst):
 def hsv2rgb(h, s, v):
     hsv = colorsys.hsv_to_rgb(h,s,v)
     return tuple(round(i * 255) for i in hsv)
+    
 def pos_to_color(x, y):
     r = 160/2
     x = round((x - r) / r * 100) / 100
@@ -26,10 +27,13 @@ def pos_to_color(x, y):
     return rgb
 
 def rgb_brightness(rgb_color, brightness):
+    # brightness values are in range 0-255
+    # to make sure that the color is not completly lost we need to rescale this to 70-255
+    brightness = int(scale(brightness,(0,255),(70,255)))
     red = rgb_color[0]/255*brightness
     green = rgb_color[1]/255*brightness
     blue = rgb_color[2]/255*brightness
-    return [red, green, blue]
+    return [int(red), int(green), int(blue)]
 
 def rgb_dec565(rgb_color):
     red = rgb_color[0]

apps/nspanel-lovelace-ui/luibackend/localization.py

@@ -0,0 +1,205 @@
+translations = {
+    'af_ZA': {
+        'ACTIVATE': "Aktiveer",
+        'aux_heat': "Aanvullende hitte",
+        'cooling': "Koel Af",
+        'drying': "Droog Uit",
+        'fan': "Waaier",
+        'idle': "Onaktief",
+        'off': "Af",
+    },
+    'ca_ES': {
+        'PRESS': "Prem",
+        'ACTIVATE': "Activar",
+        'aux_heat': "Calefactor auxiliar",
+        'cooling': "Refredant",
+        'drying': "Assecant",
+        'fan': "Ventilació",
+        'idle': "Inactiu",
+        'off': "OFF",
+    },
+    'cs_CZ': {
+        'PRESS': "Stisknutí",
+        'ACTIVATE': "Aktivovat",
+        'aux_heat': "Pomocné teplo",
+        'cooling': "Chlazení",
+        'drying': "Sušení",
+        'fan': "Ventilátor",
+        'idle': "Nečinný",
+        'off': "Vypnuto",
+    },
+    'cy_GB': {
+        'ACTIVATE': "Actifadu",
+        'off': "I ffwrdd",
+    },
+    'da_DK': {
+        'PRESS': "Tryk",
+        'ACTIVATE': "Aktiver",
+        'aux_heat': "Støtte-varme",
+        'cooling': "Køling",
+        'drying': "Tørring",
+        'fan': "Blæser",
+        'idle': "Inaktiv",
+        'off': "Fra",
+    },
+    'de_DE': {
+        'PRESS': "Drücken",
+        'ACTIVATE': "Aktivieren",
+        'aux_heat': "Hilfswärme",
+        'cooling': "Kühlung",
+        'drying': "Trocknen",
+        'fan': "Ventilator",
+        'idle': "Leerlauf",
+        'off': "Aus",
+    },
+    'en_GB': {
+    },
+    'en_US': {
+        'PRESS': "Press",
+        'ACTIVATE': "Activate",
+        'aux_heat': "Aux heat",
+        'cooling': "Cooling",
+        'drying': "Drying",
+        'fan': "Fan",
+        'idle': "Idle",
+        'off': "Off",
+    },
+    'es_ES': {
+        'PRESS': "Pulsa",
+        'ACTIVATE': "Activar",
+        'aux_heat': "Calor auxiliar",
+        'cooling': "Enfriando",
+        'drying': "Secando",
+        'fan': "Ventilador",
+        'idle': "Inactivo",
+        'off': "Apagado",
+    },
+    'et_EE': {
+        'PRESS': "Vajuta nuppu",
+        'ACTIVATE': "Aktiveeri",
+        'aux_heat': "Abiküte",
+        'cooling': "Jahutamine",
+        'drying': "Kuivatamine",
+        'fan': "Ventilaator",
+        'idle': "Ootel",
+        'off': "Väljas",
+    },
+    'eu_ES': {
+        'ACTIVATE': "Aktibatu",
+        'off': "Itzalita",
+    },
+    'fi_FI': {
+        'PRESS': "Paina",
+        'ACTIVATE': "Aktivoi",
+        'aux_heat': "Lisälämpö",
+        'cooling': "Jäähdytys",
+        'drying': "Kuivaus",
+        'fan': "Tuuletin",
+        'idle': "Lepotilassa",
+        'off': "Pois",
+    },
+    'fr_FR': {
+        'PRESS': "Appui",
+        'ACTIVATE': "Activer",
+        'aux_heat': "Chauffage d'appoint",
+        'cooling': "Refroidissement",
+        'drying': "Séchage",
+        'fan': "Ventilateur",
+        'idle': "Inactif",
+        'off': "Off",
+    },
+    'fy_DE': {
+        'off': "Út",
+    },
+    'gl_ES': {
+        'off': "Apagado",
+    },
+    'hr_HR': {
+        'ACTIVATE': "Aktivirati",
+        'aux_heat': "Pomoćno grijanje",
+        'cooling': "Hlađenje",
+        'drying': "Sušenje",
+        'fan': "Ventilator",
+        'idle': "Neaktivan",
+        'off': "Isključen",
+    },
+    'id_ID': {
+        'PRESS': "Tekan",
+        'ACTIVATE': "Aktifkan",
+        'aux_heat': "Pemanasan tambahan",
+        'cooling': "Mendinginkan",
+        'drying': "Mengeringkan",
+        'fan': "Kipas",
+        'idle': "Diam",
+        'off': "Mati",
+    },
+    'is_IS': {
+        'PRESS': "Ýttu á",
+        'ACTIVATE': "Virkja",
+        'cooling': "Kæling",
+        'drying': "Þurrkun",
+        'fan': "Vifta",
+        'idle': "Aðgerðalaus",
+        'off': "Slökkt",
+    },
+    'it_IT': {
+        'PRESS': "Premi",
+        'ACTIVATE': "Attiva",
+        'aux_heat': "Riscaldamento ausiliario",
+        'cooling': "Raffreddamento",
+        'drying': "Deumidificazione",
+        'fan': "Ventilatore",
+        'idle': "Inattivo",
+        'off': "Spento",
+    },
+    'nl_NL': {
+        'PRESS': "Klik",
+        'ACTIVATE': "Activeren",
+        'aux_heat': "Extra warmte",
+        'cooling': "Koelen",
+        'drying': "Ontvochtigen",
+        'fan': "Ventilator",
+        'idle': "Inactief",
+        'off': "Uit",
+    },
+    'nn_NO': {
+        'ACTIVATE': "Aktiver",
+        'aux_heat': "Aux-varme",
+        'cooling': "Nedkjøling",
+        'drying': "Tørkar",
+        'fan': "Vifte",
+        'idle': "Tomgang",
+        'off': "Av",
+    },
+    'pt_PT': {
+        'PRESS': "Pressione",
+        'ACTIVATE': "Ativar",
+        'aux_heat': "Calor auxiliar",
+        'cooling': "Resfriar",
+        'drying': "Secagem",
+        'fan': "Ventoinha",
+        'idle': "Em espera",
+        'off': "Desligado",
+    },
+    'sr_RS': {
+        'PRESS': "Pritisnite taster",
+        'ACTIVATE': "Aktiviraj",
+        'off': "Isključen",
+    },
+    'sv_SE': {
+        'PRESS': "Tryck",
+        'ACTIVATE': "Aktivera",
+        'aux_heat': "Underhållsvärme",
+        'cooling': "Kyler",
+        'drying': "Avfuktar",
+        'fan': "Fläkt",
+        'idle': "Inaktiv",
+        'off': "Av",
+    },
+}
+
+def get_translation(locale, input):
+    if locale in translations:
+        return translations.get(locale).get(input, input)
+    else:
+        return translations.get("en_US").get(input, input)

apps/nspanel-lovelace-ui/luibackend/mqttListener.py

@@ -0,0 +1,54 @@
+import json
+
+import logging
+
+LOGGER = logging.getLogger(__name__)
+
+class LuiMqttListener(object):
+
+    def __init__(self, mqtt_api, topic, controller, updater):
+        self._controller = controller
+        self._updater = updater
+        # Setup, mqtt subscription and callback
+        mqtt_api.mqtt_subscribe(topic=topic)
+        mqtt_api.listen_event(self.mqtt_event_callback, "MQTT_MESSAGE", topic=topic, namespace='mqtt')
+
+
+    def mqtt_event_callback(self, event_name, data, kwargs):
+        LOGGER.debug(f'MQTT callback for: {data}')
+        # Parse Json Message from Tasmota and strip out message from nextion display
+        data = json.loads(data["payload"])
+        if("nlui_driver_version" in data):
+            msg = data["nlui_driver_version"]
+            self._updater.set_tasmota_driver_version(int(msg))
+            self._updater.check_updates()
+        if("CustomRecv" not in data):
+            return
+        msg = data["CustomRecv"]
+        LOGGER.info(f"Received Message from Screen: {msg}")
+        # Split message into parts seperated by ","
+        msg = msg.split(",")
+        # run action based on received command
+        if msg[0] == "event":
+            if msg[1] == "startup":
+                display_firmware_version = int(msg[2])
+                self._updater.set_current_display_firmware_version(display_firmware_version)
+                # check for updates
+                msg_send = self._updater.check_updates()
+                # send messages for current page 
+                if not msg_send:
+                    self._controller.startup()
+            if msg[1] == "screensaverOpen":
+                self._controller.weather_update("")
+            if msg[1] == "buttonPress2":
+                entity_id = msg[2]
+                btype = msg[3]
+                value = msg[4] if len(msg) > 4 else None
+
+                if entity_id == "updateDisplayNoYes" and value == "yes":
+                    self._updater.update_panel_driver()
+
+                self._controller.button_press(entity_id, btype, value)
+            if msg[1] == "pageOpenDetail":
+                self._controller.detail_open(msg[2], msg[3])
+

apps/nspanel-lovelace-ui/luibackend/pages.py

@@ -0,0 +1,320 @@
+import logging
+import datetime
+
+from icon_mapping import get_icon_id
+from icons import get_icon_id_ha
+from helper import scale, rgb_dec565, rgb_brightness
+from localization import get_translation
+
+# check Babel
+import importlib
+babel_spec = importlib.util.find_spec("babel")
+if babel_spec is not None:
+    import babel.dates
+
+LOGGER = logging.getLogger(__name__)
+
+class LuiPagesGen(object):
+
+    def __init__(self, ha_api, config, send_mqtt_msg):
+        self._ha_api = ha_api
+        self._config = config
+        self._locale  = config.get("locale")
+        self._send_mqtt_msg = send_mqtt_msg
+    
+    def get_entity_color(self, entity):
+        attr = entity.attributes
+        default_color_on  = rgb_dec565([253, 216, 53])
+        default_color_off = rgb_dec565([68, 115, 158])
+        icon_color = default_color_on if entity.state == "on" else default_color_off
+
+        if "rgb_color" in attr:
+            color = attr.rgb_color
+            if "brightness" in attr:
+                color = rgb_brightness(color, attr.brightness)
+            icon_color = rgb_dec565(color)
+        elif "brightness" in attr:
+            color = rgb_brightness([253, 216, 53], attr.brightness)
+            icon_color = rgb_dec565(color)
+        return icon_color
+
+    def update_time(self, kwargs):
+        time = datetime.datetime.now().strftime(self._config.get("timeFormat"))
+        self._send_mqtt_msg(f"time,{time}")
+
+    def update_date(self, kwargs):
+        global babel_spec
+        if babel_spec is not None:
+            dateformat = self._config.get("dateFormatBabel")
+            date = babel.dates.format_date(datetime.datetime.now(), dateformat, locale=self._locale)
+        else:
+            dateformat = self._config.get("dateFormat")
+            date = datetime.datetime.now().strftime(dateformat)
+        self._send_mqtt_msg(f"date,?{date}")
+
+    def page_type(self, target_page):
+        self._send_mqtt_msg(f"pageType,{target_page}")
+    
+    def update_screensaver_weather(self, kwargs):
+        global babel_spec
+        we_name = kwargs['weather']
+        unit = kwargs['unit']
+
+        if self._ha_api.entity_exists(we_name):
+            we = self._ha_api.get_entity(we_name)
+        else:
+            LOGGER.error("Skipping Weather Update, entitiy not found")
+            return
+
+        icon_cur        = get_icon_id_ha("weather", state=we.state)
+        text_cur        = f"{we.attributes.temperature}{unit}"
+        icon_cur_detail = get_icon_id("water-percent")
+        text_cur_detail = f"{we.attributes.humidity} %"
+
+        wOF1 = self._config.get("weatherOverrideForecast1")
+        if wOF1 is None:
+            up1   = we.attributes.forecast[0]['datetime']
+            up1   = datetime.datetime.fromisoformat(up1)
+            if babel_spec is not None:
+                up1 = babel.dates.format_date(up1, "E", locale=self._locale)
+            else:
+                up1 = up1.strftime("%a")
+            icon1 = get_icon_id_ha("weather", state=we.attributes.forecast[0]['condition'])
+            down1 = f"{we.attributes.forecast[0]['temperature']} {unit}"
+        else:
+            LOGGER.info(f"Forecast 1 is overrriden with {wOF1}")
+            icon = None
+            name = None
+            if type(wOF1) is dict:
+                icon = next(iter(wOF1.items()))[1].get('icon')
+                name = next(iter(wOF1.items()))[1].get('name')
+                wOF1 = next(iter(wOF1.items()))[0]
+            entity = self._ha_api.get_entity(wOF1)
+            up1 = name if name is not None else entity.attributes.friendly_name
+            icon1 = get_icon_id_ha("sensor", state=entity.state, device_class=entity.attributes.get("device_class", ""), overwrite=icon)
+            unit_of_measurement = entity.attributes.get("unit_of_measurement", "")
+            down1 = f"{entity.state} {unit_of_measurement}"
+
+
+        wOF2 = self._config.get("weatherOverrideForecast2")
+        if wOF2 is None:
+            up2   = we.attributes.forecast[1]['datetime']
+            up2   = datetime.datetime.fromisoformat(up2)
+            if babel_spec is not None:
+                up2 = babel.dates.format_date(up2, "E", locale=self._locale)
+            else:
+                up2 = up2.strftime("%a")
+            icon2 = get_icon_id_ha("weather", state=we.attributes.forecast[1]['condition'])
+            down2 = f"{we.attributes.forecast[1]['temperature']} {unit}"
+
+        else:
+            LOGGER.info(f"Forecast 2 is overrriden with {wOF2}")
+            icon = None
+            name = None
+            if type(wOF2) is dict:
+                icon = next(iter(wOF2.items()))[1].get('icon')
+                name = next(iter(wOF2.items()))[1].get('name')
+                wOF2 = next(iter(wOF2.items()))[0]
+            entity = self._ha_api.get_entity(wOF2)
+            up2 = name if name is not None else entity.attributes.friendly_name
+            icon2 = get_icon_id_ha("sensor", state=entity.state, device_class=entity.attributes.get("device_class", ""), overwrite=icon)
+            unit_of_measurement = entity.attributes.get("unit_of_measurement", "")
+            down2 = f"{entity.state} {unit_of_measurement}"
+
+            
+        self._send_mqtt_msg(f"weatherUpdate,?{icon_cur}?{text_cur}?{icon_cur_detail}?{text_cur_detail}?{up1}?{icon1}?{down1}?{up2}?{icon2}?{down2}")
+
+    def generate_entities_item(self, item):
+        icon = None
+        name = None
+        if type(item) is dict:
+            icon = next(iter(item.items()))[1].get('icon')
+            name = next(iter(item.items()))[1].get('name')
+            item = next(iter(item.items()))[0]
+        # type of the item is the string before the "." in the item name
+        item_type = item.split(".")[0]
+        LOGGER.debug(f"Generating item command for {item} with type {item_type}",)
+        # Internal Entities 
+        if item_type == "delete":
+            return f",{item_type},,,,,"
+        if item_type == "navigate":
+            page_search = self._config.get_root_page().search_page_by_name(item)
+            if len(page_search) > 0:
+                page_data = page_search[0].data
+                name = page_data.get("heading")
+                text = get_translation(self._locale,"PRESS")
+                icon_id = get_icon_id(page_data.get("icon", "gesture-tap-button"))
+                return f",button,{item},{icon_id},17299,{name},{text}"
+            else:
+                return f",text,{item},{get_icon_id('alert-circle-outline')},17299,page not found,"
+        if not self._ha_api.entity_exists(item):
+            return f",text,{item},{get_icon_id('alert-circle-outline')},17299,Not found check, apps.yaml"
+        
+        # HA Entities
+        entity = self._ha_api.get_entity(item)
+        name = name if name is not None else entity.attributes.friendly_name
+        if item_type == "cover":
+            icon_id = get_icon_id_ha("cover", state=entity.state, overwrite=icon)
+            return f",shutter,{item},{icon_id},17299,{name},"
+        if item_type in "light":
+            switch_val = 1 if entity.state == "on" else 0
+            icon_color = self.get_entity_color(entity)
+            icon_id = get_icon_id_ha("light", overwrite=icon)
+            return f",{item_type},{item},{icon_id},{icon_color},{name},{switch_val}"
+        if item_type in ["switch", "input_boolean"]:
+            switch_val = 1 if entity.state == "on" else 0
+            icon_color = self.get_entity_color(entity)
+            icon_id = get_icon_id_ha(item_type, state=entity.state, overwrite=icon)
+            return f",switch,{item},{icon_id},{icon_color},{name},{switch_val}"
+        if item_type in ["sensor", "binary_sensor"]:
+            device_class = entity.attributes.get("device_class", "")
+            icon_id = get_icon_id_ha("sensor", state=entity.state, device_class=device_class, overwrite=icon)
+            unit_of_measurement = entity.attributes.get("unit_of_measurement", "")
+            value = entity.state + " " + unit_of_measurement
+            icon_color = self.get_entity_color(entity)
+            return f",text,{item},{icon_id},{icon_color},{name},{value}"
+        if item_type in ["button", "input_button"]:
+            icon_id = get_icon_id_ha("button", overwrite=icon)
+            text = get_translation(self._locale,"PRESS")
+            return f",button,{item},{icon_id},17299,{name},{text}"
+        if item_type == "scene":
+            icon_id = get_icon_id_ha("scene", overwrite=icon)
+            text = get_translation(self._locale,"ACTIVATE")
+            return f",button,{item},{icon_id},17299,{name},{text}"
+
+
+    def generate_entities_page(self, heading, items):
+        # Set Heading of Page
+        self._send_mqtt_msg(f"entityUpdHeading,{heading}")
+        # Get items and construct cmd string
+        command = "entityUpd"
+        for item in items:
+            command += self.generate_entities_item(item)
+        self._send_mqtt_msg(command)
+
+
+    def generate_thermo_page(self, item):
+        if not self._ha_api.entity_exists(item):
+            command = f"entityUpd,{item},Not found,220,220,Not found,150,300,5"
+        else:
+            entity       = self._ha_api.get_entity(item)
+            heading      = entity.attributes.friendly_name
+            current_temp = int(entity.attributes.get("current_temperature", 0)*10)
+            dest_temp    = int(entity.attributes.get("temperature", 0)*10)
+            status       = entity.attributes.get("hvac_action", "")
+            status       = get_translation(self._locale,status)
+            min_temp     = int(entity.attributes.get("min_temp", 0)*10)
+            max_temp     = int(entity.attributes.get("max_temp", 0)*10)
+            step_temp    = int(entity.attributes.get("target_temp_step", 0.5)*10) 
+            icon_res = ""
+            hvac_modes = entity.attributes.get("hvac_modes", [])
+            for mode in hvac_modes:
+                icon_id = get_icon_id('alert-circle-outline')
+                color_on = 64512
+                if mode == "auto":
+                    icon_id = get_icon_id("calendar-sync")
+                    color_on = 1024
+                if mode == "heat":
+                    icon_id = get_icon_id("fire")
+                    color_on = 64512
+                if mode == "off":
+                    icon_id = get_icon_id("power")
+                    color_on = 35921
+                if mode == "cool":
+                    icon_id = get_icon_id("snowflake")
+                    color_on = 11487
+                if mode == "dry":
+                    icon_id = get_icon_id("water-percent")
+                    color_on = 60897
+                if mode == "fan_only":
+                    icon_id = get_icon_id("fan")
+                    color_on = 35921
+                state = 0
+                if(mode == entity.state):
+                    state = 1
+                icon_res += f",{icon_id},{color_on},{state},{mode}"
+    
+            len_hvac_modes = len(hvac_modes)
+            if len_hvac_modes%2 == 0:
+                # even
+                padding_len = int((4-len_hvac_modes)/2)
+                icon_res =  ","*4*padding_len + icon_res + ","*4*padding_len
+                # use last 4 icons
+                icon_res =  ","*4*5 + icon_res
+            else:
+                # uneven
+                padding_len = int((5-len_hvac_modes)/2)
+                icon_res =  ","*4*padding_len + icon_res + ","*4*padding_len
+                # use first 5 icons
+                icon_res = icon_res + ","*4*4
+            command = f"entityUpd,{item},{heading},{current_temp},{dest_temp},{status},{min_temp},{max_temp},{step_temp}{icon_res}"
+        self._send_mqtt_msg(command)
+
+    def generate_media_page(self, item):
+        if not self._ha_api.entity_exists(item):
+            command = f"entityUpd,|{item}|Not found|{get_icon_id('alert-circle-outline')}|Please check your|apps.yaml in AppDaemon|50|{get_icon_id('alert-circle-outline')}"
+        else:
+            entity        = self._ha_api.get_entity(item)
+            heading       = entity.attributes.friendly_name
+            icon          = 0
+            title         = entity.attributes.get("media_title", "")
+            author        = entity.attributes.get("media_artist", "")
+            volume        = int(entity.attributes.get("volume_level", 0)*100)
+            iconplaypause = get_icon_id("pause") if entity.state == "playing" else get_icon_id("play")
+            if "media_content_type" in entity.attributes:
+                if entity.attributes.media_content_type == "music":
+                    icon = get_icon_id("music")
+            command = f"entityUpd,|{item}|{heading}|{icon}|{title}|{author}|{volume}|{iconplaypause}"
+        self._send_mqtt_msg(command)
+
+    def render_page(self, page, send_page_type=True):
+        config    = page.data
+        page_type = config["type"]
+        LOGGER.info(f"Started rendering of page {page.pos} with type {page_type}")
+        # Switch to page
+        if send_page_type:
+            self.page_type(page_type)
+        if page_type in ["cardEntities", "cardGrid"]:
+            heading = config.get("heading", "unknown")
+            self.generate_entities_page(heading, page.get_items())
+            return
+        if page_type == "cardThermo":
+            self.generate_thermo_page(page.data.get("item"))
+        if page_type == "cardMedia":
+            self.generate_media_page(page.data.get("item"))
+
+    def generate_light_detail_page(self, entity):
+        entity = self._ha_api.get_entity(entity)
+        switch_val = 1 if entity.state == "on" else 0
+        icon_color = self.get_entity_color(entity)
+        brightness = "disable"
+        color_temp = "disable"
+        color = "disable"
+        if entity.state == "on":
+            if "brightness" in entity.attributes:
+                # scale 0-255 brightness from ha to 0-100
+                brightness = int(scale(entity.attributes.brightness,(0,255),(0,100)))
+            else:
+                brightness = "disable"
+            if "color_temp" in entity.attributes.supported_color_modes:
+                if "color_temp" in entity.attributes:
+                    # scale ha color temp range to 0-100
+                    color_temp = int(scale(entity.attributes.color_temp,(entity.attributes.min_mireds, entity.attributes.max_mireds),(0,100)))
+                else:
+                    color_temp = "unknown"
+            else:
+                color_temp = "disable"
+            list_color_modes = ["xy", "rgb", "rgbw", "hs"]
+            if any(item in list_color_modes for item in entity.attributes.supported_color_modes):
+                color = "enable"
+            else:
+                color = "disable"
+        self._send_mqtt_msg(f"entityUpdateDetail,{get_icon_id('lightbulb')},{icon_color},{switch_val},{brightness},{color_temp},{color}")
+    
+    def generate_shutter_detail_page(self, entity):
+        pos = 100-int(entity.attributes.get("current_position", 50))
+        self._send_mqtt_msg(f"entityUpdateDetail,{pos}")
+
+    def send_message_page(self, id, heading, msg, b1, b2):
+        self._send_mqtt_msg(f"pageType,popupNotify")
+        self._send_mqtt_msg(f"entityUpdateDetail,|{id}|{heading}|65535|{b1}|65535|{b2}|65535|{msg}|65535|0")

apps/nspanel-lovelace-ui/luibackend/updater.py

@@ -0,0 +1,77 @@
+import logging
+
+LOGGER = logging.getLogger(__name__)
+
+class Updater:
+    def __init__(self, send_mqtt_msg, topic_send, mode, desired_display_firmware_version, desired_display_firmware_url, desired_tasmota_driver_version, desired_tasmota_driver_url):
+        self.desired_display_firmware_version = desired_display_firmware_version
+        self.desired_display_firmware_url     = desired_display_firmware_url
+        self.desired_tasmota_driver_version   = desired_tasmota_driver_version
+        self.desired_tasmota_driver_url       = desired_tasmota_driver_url
+        
+        self.mode = mode
+        self._send_mqtt_msg = send_mqtt_msg
+        self.topic_send = topic_send
+        self.current_tasmota_driver_version   = None
+        self.current_display_firmware_version = None
+
+    def set_tasmota_driver_version(self, driver_version):
+        self.current_tasmota_driver_version = driver_version
+    def set_current_display_firmware_version(self, panel_version):
+        self.current_display_firmware_version = panel_version
+
+    def check_pre_req(self):
+        # we need to know both versions to continue
+        if self.current_tasmota_driver_version is not None and self.current_display_firmware_version is not None:
+            # tasmota driver has to be at least version 2 for Update command 
+            # and panel has to be at version 11 for notify commands
+            # version 16 for new button cmd format
+            if self.current_tasmota_driver_version >= 2 and self.current_display_firmware_version >= 16:
+                return True
+            return False
+
+    def send_message_page(self, id, heading, msg, b1, b2):
+        self._send_mqtt_msg(f"pageType,popupNotify")
+        self._send_mqtt_msg(f"entityUpdateDetail,|{id}|{heading}|65535|{b1}|65535|{b2}|65535|{msg}|65535|0")
+
+    def check_updates(self):
+        # return's true if a notification was send to the panel
+        # run pre req check
+        if self.check_pre_req():
+            LOGGER.info("Update Pre-Check sucessful Tasmota Driver Version: %s Panel Version: %s", self.current_tasmota_driver_version, self.current_display_firmware_version)
+            # check if tasmota driver needs update
+            if self.current_tasmota_driver_version < self.desired_tasmota_driver_version:
+                LOGGER.info("Update of Tasmota Driver needed")
+                # in auto mode just do the update
+                if self.mode == "auto":
+                    self.update_berry_driver()
+                    return False
+                # send notification about the update
+                if self.mode == "auto-notify":
+                    update_msg = "There's an update available for the Tasmota      Berry driver, do you want to start the update  now?                                                                      If you encounter issues after the update or      this message appears frequently, please check the manual and repeat the installation steps   for the Tasmota Berry driver. "
+                    self.send_message_page("updateBerryNoYes", "Driver Update available!", update_msg, "Dismiss", "Yes")
+                    return True
+                return False
+            # check if display firmware needs an update
+            if self.current_display_firmware_version < self.desired_display_firmware_version:
+                LOGGER.info("Update of Display Firmware needed")
+                # in auto mode just do the update
+                if self.mode == "auto":
+                    self.update_panel_driver()
+                    return False
+                # send notification about the update
+                if self.mode == "auto-notify":
+                    update_msg = "There's a firmware update available for the      Nextion screen of the NSPanel. Do you want tostart the update now?                                         If the update fails check the installation         manual and flash again over the Tasmota console. Be patient, the update will take a while."
+                    self.send_message_page("updateDisplayNoYes", "Display Update available!", update_msg, "Dismiss", "Yes")
+                    return True
+                return False
+        else:
+            LOGGER.info("Update Pre-Check failed Tasmota Driver Version: %s Panel Version: %s", self.current_tasmota_driver_version, self.current_display_firmware_version)
+            return False
+
+    def update_berry_driver(self):
+        topic = self.topic_send.replace("CustomSend", "UpdateDriverVersion")
+        self._send_mqtt_msg(self.desired_tasmota_driver_url, topic=topic)
+    def update_panel_driver(self):
+        topic = self.topic_send.replace("CustomSend", "FlashNextion")
+        self._send_mqtt_msg(self.desired_display_firmware_url, topic=topic)

apps/nspanel-lovelace-ui/nspanel-lovelace-ui.py

@@ -1,627 +1,79 @@
-import json
+import logging
-import datetime
+import traceback
+
 import hassapi as hass
-from helper import scale, pos_to_color, rgb_dec565, rgb_brightness
+
-from icon_mapping import get_icon_id
+from luibackend.config import LuiBackendConfig
-from icons import get_icon_id_ha
+from luibackend.controller import LuiController
-# check Babel
+from luibackend.mqttListener import LuiMqttListener
-import importlib
+from luibackend.updater import Updater
-babel_spec = importlib.util.find_spec("babel")
+
-if babel_spec is not None:
+LOGGER = logging.getLogger(__name__)
-  import babel.dates
+
+
+class AppDaemonLoggingHandler(logging.Handler):
+    def __init__(self, app):
+        super().__init__()
+        self._app = app
+
+    def emit(self, record):
+        message = record.getMessage()
+        if record.exc_info:
+            message += '\nTraceback (most recent call last):\n'
+            message += '\n'.join(traceback.format_tb(record.exc_info[2]))
+            message += f'{record.exc_info[0].__name__}: {record.exc_info[1]}'
+        self._app.log(message, level=record.levelname)
+
 
 class NsPanelLovelaceUIManager(hass.Hass):
-  def initialize(self):
+    def __init__(self, *args, **kwargs):
+        super().__init__(*args, **kwargs)
+        self._redirect_logging()
 
-    data = self.args["config"]
+    def _redirect_logging(self):
-    LovelaceUIPanel(self, data)
+        # Add a handler for the logging module that will convert the
+        # calls to AppDaemon's logger with the self instance, so that
+        # we can simply use logging in the rest of the application
+        rlogger = logging.getLogger()
+        rlogger.handlers = [
+            h for h in rlogger.handlers
+            if type(h).__name__ != AppDaemonLoggingHandler.__name__
+        ]
+        rlogger.addHandler(AppDaemonLoggingHandler(self))
 
-class Updater:
+        # We want to grab all the logs, AppDaemon will
-  def __init__(self, nsplui, mode):
+        # then care about filtering those we asked for
-    self.desired_display_firmware_version = 16
+        rlogger.setLevel(logging.DEBUG)
-    self.desired_display_firmware_url     = "http://nspanel.pky.eu/lovelace-ui/github/nspanel-v1.7.0.tft"
-    self.desired_tasmota_driver_version   = 3
-    self.desired_tasmota_driver_url       = "https://raw.githubusercontent.com/joBr99/nspanel-lovelace-ui/main/tasmota/autoexec.be"
 
-    self.mode = mode
-    self.nsplui = nsplui
-    self.current_tasmota_driver_version   = None
-    self.current_display_firmware_version = None
 
-  def set_tasmota_driver_version(self, driver_version):
-    self.current_tasmota_driver_version = driver_version
-  def set_current_display_firmware_version(self, panel_version):
-    self.current_display_firmware_version = panel_version
-  def check_pre_req(self):
-    # we need to know both versions to continue
-    if self.current_tasmota_driver_version is not None and self.current_display_firmware_version is not None:
-      # tasmota driver has to be at least version 2 for Update command and panel has to be at version 11 for notify commands
-      if self.current_tasmota_driver_version >= 2 and self.current_display_firmware_version >= 11:
-        return True
-    return False
-  def check_updates(self):
-    # return's true if a notification was send to the panel
-    # run pre req check
-    if self.check_pre_req():
-      self.nsplui.api.log("Update Pre-Check sucessful Tasmota Driver Version: %s Panel Version: %s", self.current_tasmota_driver_version, self.current_display_firmware_version, level="DEBUG")
-      # check if tasmota driver needs update
-      if self.current_tasmota_driver_version < self.desired_tasmota_driver_version:
-        self.nsplui.api.log("Update of Tasmota Driver needed")
-        # in auto mode just do the update
-        if self.mode == "auto":
-          self.update_berry_driver()
-          return False
-        # send notification about the update
-        if self.mode == "auto-notify":
-          update_msg = "There's an update avalible for the tasmota      berry driver, do you want to start the update  now?                                                                      If you encounter issues after the update or      this message appears frequently, please checkthe manual and repeat the installation steps   for the tasmota berry driver. "
-          self.nsplui.send_message_page("updateBerryNoYes", "Driver Update available!", update_msg, "Dismiss", "Yes")
-          return True
-        return False
-      # check if display firmware needs an update
-      if self.current_display_firmware_version < self.desired_display_firmware_version:
-        self.nsplui.api.log("Update of Display Firmware needed")
-        # in auto mode just do the update
-        if self.mode == "auto":
-          self.update_panel_driver()
-          return False
-        # send notification about the update
-        if self.mode == "auto-notify":
-          update_msg = "There's a firmware update avalible for the       nextion sceen inside of nspanel, do you want  to start the update now?                                     If the update fails check the installation         manual and flash again over the tasmota console. Be pationed the update will take a while."
-          self.nsplui.send_message_page("updateDisplayNoYes", "Display Update available!", update_msg, "Dismiss", "Yes")
-          return True
-        return False
-    else:
-      self.nsplui.api.log("Update Pre-Check failed Tasmota Driver Version: %s Panel Version: %s", self.current_tasmota_driver_version, self.current_display_firmware_version)
-      return False
-  def update_berry_driver(self):
-    self.nsplui.mqtt.mqtt_publish(self.nsplui.config["panelSendTopic"].replace("CustomSend", "UpdateDriverVersion"), self.desired_tasmota_driver_url)
-  def update_panel_driver(self):
-    self.nsplui.mqtt.mqtt_publish(self.nsplui.config["panelSendTopic"].replace("CustomSend", "FlashNextion"), self.desired_display_firmware_url)
 
-class LovelaceUIPanel:
+    def initialize(self):
-  def __init__(self, api, config):
+        LOGGER.info('Starting')
-    self.api = api
+        mqtt_api = self._mqtt_api = self.get_plugin_api("MQTT")
-    self.config = config
+        cfg = self._cfg = LuiBackendConfig(self.args["config"])
-    self.current_page_nr = 0
-    self.current_screensaver_brightness = 10
         
-    # check configured items
+        topic_send = cfg.get("panelSendTopic")
-    self.check_items()
+        def send_mqtt_msg(msg, topic=None):
+            if topic is None:
+                topic = topic_send
+            LOGGER.info(f"Sending MQTT Message: {msg}")
+            mqtt_api.mqtt_publish(topic, msg)
 
-    # Setup, mqtt subscription and callback
+        # Request Tasmota Driver Version
-    self.mqtt = self.api.get_plugin_api("MQTT")
+        mqtt_api.mqtt_publish(topic_send.replace("CustomSend", "GetDriverVersion"), "x")
-    self.mqtt.mqtt_subscribe(topic=self.config["panelRecvTopic"])
-    self.mqtt.listen_event(self.handle_mqtt_incoming_message, "MQTT_MESSAGE", topic=self.config["panelRecvTopic"], namespace='mqtt')
 
-    # Read updateMode and use "auto-notify" as default
+        controller = LuiController(self, cfg, send_mqtt_msg)
-    update_mode = self.config["updateMode"] if "updateMode" in self.config else "auto-notify"
-    self.updater = Updater(self, update_mode)
 
-    # Request Tasmota Driver Version
+        desired_display_firmware_version = 19
-    self.mqtt.mqtt_publish(self.config["panelSendTopic"].replace("CustomSend", "GetDriverVersion"), "x")
+        desired_display_firmware_url     = "http://nspanel.pky.eu/lovelace-ui/github/nspanel-v1.8.3.tft"
+        desired_tasmota_driver_version   = 3
+        desired_tasmota_driver_url       = "https://raw.githubusercontent.com/joBr99/nspanel-lovelace-ui/main/tasmota/autoexec.be"
         
-    # send panel back to startup page on restart of this script
+        mode = cfg.get("updateMode")
-    self.send_mqtt_msg("pageType,pageStartup")
+        topic_send = cfg.get("panelSendTopic")
+        updater = Updater(send_mqtt_msg, topic_send, mode, desired_display_firmware_version, desired_display_firmware_url, desired_tasmota_driver_version, desired_tasmota_driver_url)
 
-    # Setup time callback
+        topic_recv = cfg.get("panelRecvTopic")
-    time = datetime.time(0, 0, 0)
+        LuiMqttListener(mqtt_api, topic_recv, controller, updater)
-    self.api.run_minutely(self.update_time, time)
-
-    # Setup date callback
-    time = datetime.time(0, 0, 0)
-    self.api.run_daily(self.update_date, time)
-    # send date update in case config has been changed
-    self.update_date("")
-
-    # Setup weather callback
-    weather_interval = 15 * 60 # 15 minutes
-    self.api.run_every(self.update_screensaver_weather, "now", weather_interval)
-
-    # set brightness of screensaver
-    if type(self.config["brightnessScreensaver"]) == int:
-      self.current_screensaver_brightness = self.config["brightnessScreensaver"]
-    elif type(self.config["brightnessScreensaver"]) == list:
-      sorted_timesets = sorted(self.config["brightnessScreensaver"], key=lambda d: self.api.parse_time(d['time']))
-      found_current_dim_value = False
-      for index, timeset in enumerate(sorted_timesets):
-        self.api.run_daily(self.update_screensaver_brightness, timeset["time"], value=timeset["value"])
-        self.api.log("Current time %s", self.api.get_now().time(), level="DEBUG")
-        if self.api.parse_time(timeset["time"]) > self.api.get_now().time() and not found_current_dim_value:
-          # first time after current time, set dim value
-          self.current_screensaver_brightness = sorted_timesets[index-1]["value"]
-          self.api.log("Setting dim value to %s", sorted_timesets[index-1]) #level="DEBUG"
-          found_current_dim_value = True
-        # still no dim value
-        if not found_current_dim_value:
-          self.current_screensaver_brightness = sorted_timesets[-1]["value"]
-        # send screensaver brightness in case config has changed
-        self.update_screensaver_brightness(kwargs={"value": self.current_screensaver_brightness})
-    
-    # register callbacks
-    self.register_callbacks()
-
-  def filter_dict_from_item_list(self, items):
-    # remove all dicts from list
-    cleaned_list = []
-    for item in items:
-      # in case item is a dict, grab the item name
-      if type(item) is dict:
-        cleaned_list.append(next(iter(item)))
-      else:
-        cleaned_list.append(item)
-    return cleaned_list
-
-  def get_all_configured_items(self):
-    items = []
-    for page in self.config["pages"]:
-      if "item" in page:
-        items.append(page["item"])
-      if "items" in page:
-        items.extend(page["items"])
-    return self.filter_dict_from_item_list(items)
-
-  def check_items(self):
-    items = self.get_all_configured_items()
-    for item in items:
-      if self.api.entity_exists(item) or item == "delete":
-        self.api.log("Found configured item in Home Assistant %s", item, level="DEBUG")
-      else:
-        self.api.error("The following item does not exist in Home Assistant, configuration error: %s", item)
-
-  def register_callbacks(self):
-    items = self.get_all_configured_items()
-    for item in items:
-      self.api.log("Enable state callback for %s", item, level="DEBUG")
-      self.api.handle = self.api.listen_state(self.state_change_callback, entity_id=item, attribute="all")
-
-  def state_change_callback(self, entity, attribute, old, new, kwargs):
-    current_page_config = self.config["pages"][self.current_page_nr]
-    page_type = current_page_config["type"]
-    self.api.log(f"Got state_callback from {entity}", level="DEBUG")
-    
-    if page_type in ["cardEntities", "cardGrid"]:
-      items = current_page_config["items"]
-      items_filtered = self.filter_dict_from_item_list(items)
-      if entity in items_filtered:
-        self.api.log(f"State change on current page for {entity}", level="DEBUG")
-        # send update of the page
-        self.generate_entities_page(items)
-        # send detail pages in case they are open
-        if(entity.startswith("cover")):
-          self.generate_shutter_detail_page(entity)
-        if(entity.startswith("light")):
-          self.generate_light_detail_page(entity)
-      return
-    
-    if page_type in ["cardThermo", "cardMedia"]:
-      if entity == current_page_config["item"]:
-        self.api.log(f"State change on current page for {entity}", level="DEBUG")
-        # send update of the whole page
-        if page_type == "cardThermo":
-          self.generate_thermo_page(entity)
-          return
-        if page_type == "cardMedia":
-          self.generate_media_page(entity)
-          return
-      return
-
-  def send_mqtt_msg(self,msg):
-    self.api.log("Send Message to Tasmota: %s", msg) #, level="DEBUG"
-    self.mqtt.mqtt_publish(self.config["panelSendTopic"], msg)
-
-  def handle_mqtt_incoming_message(self, event_name, data, kwargs):
-    # Parse Json Message from Tasmota and strip out message from nextion display
-    data = json.loads(data["payload"])
-    # pass tasmota driver version to updater class
-    if("nlui_driver_version" in data):
-      msg = data["nlui_driver_version"]
-      self.api.log("Received Driver Version from Tasmota: %s", int(msg), level="DEBUG")
-      self.updater.set_tasmota_driver_version(int(msg))
-      return
-    if("CustomRecv" not in data):
-      self.api.log("Received Message from Tasmota, but not from nextion screen: %s", data, level="DEBUG")
-      return
-    msg = data["CustomRecv"]
-    self.api.log("Received Message from Tasmota: %s", msg) #, level="DEBUG"
-    
-    # Split message into parts seperated by ","
-    msg = msg.split(",")
-
-    # run action based on received command
-    if msg[0] == "event":
-      if msg[1] == "startup":
-        self.api.log("Handling startup event", level="DEBUG")
-        # grab version from screen and pass to updater class
-        self.updater.set_current_display_firmware_version(int(msg[2]))
-        # send date and time
-        self.update_time("")
-        self.update_date("")
-        # set screensaver timeout
-        timeout = self.config["timeoutScreensaver"]
-        self.send_mqtt_msg(f"timeout,{timeout}")
-        # send screensaver brightness
-        self.update_screensaver_brightness(kwargs={"value": self.current_screensaver_brightness})
-        # check for updates
-        msg_send = self.updater.check_updates()
-        # send messages for current page 
-        if not msg_send:
-          self.generate_page(self.current_page_nr)
-
-      if msg[1] == "pageOpen":
-        # Calculate current page
-        recv_page = int(msg[2])
-        self.current_page_nr = recv_page % len(self.config["pages"])
-        self.api.log("Received pageOpen command, raw page: %i, calc page: %i", recv_page, self.current_page_nr, level="DEBUG")
-        # generate commands for current page
-        self.generate_page(self.current_page_nr)
-        
-      if msg[1] == "buttonPress":
-        entity_id = msg[4]
-        btype = msg[6]
-        if len(msg) > 7:
-          value = msg[7]
-        else:
-          value = None
-        self.handle_button_press(entity_id, btype, value)
-        
-      if msg[1] == "buttonPress2":
-        entity_id = msg[2]
-        btype = msg[3]
-        if len(msg) > 4:
-          value = msg[4]
-        else:
-          value = None
-        self.handle_button_press(entity_id, btype, value)
-
-      if msg[1] == "pageOpenDetail":
-        self.api.log("Received pageOpenDetail command", level="DEBUG")
-        if msg[2] == "popupShutter":
-          self.generate_shutter_detail_page(msg[3])
-        if msg[2] == "popupLight":
-          self.generate_light_detail_page(msg[3])
-
-      if msg[1] == "screensaverOpen":
-        self.update_screensaver_weather("")
-
-  def update_time(self, kwargs):
-    time = datetime.datetime.now().strftime(self.config["timeFormat"])
-    self.send_mqtt_msg(f"time,{time}")
-
-  def update_date(self, kwargs):
-    global babel_spec
-    if babel_spec is not None:
-      self.api.log("Babel package found", level="DEBUG")
-      if "dateFormatBabel" in self.config:
-        dateformat = self.config["dateFormatBabel"]
-      else:
-        dateformat = "full"
-      date = babel.dates.format_date(datetime.datetime.now(), dateformat, locale=self.config["locale"])
-      self.send_mqtt_msg(f"date,?{date}")
-    else:
-      self.api.log("Babel package not found", level="DEBUG")
-      date = datetime.datetime.now().strftime(self.config["dateFormat"])
-      self.send_mqtt_msg(f"date,?{date}")
-
-  def update_screensaver_brightness(self, kwargs):
-    self.current_screensaver_brightness = kwargs['value']
-    self.send_mqtt_msg(f"dimmode,{self.current_screensaver_brightness}")
-
-  def update_screensaver_weather(self, kwargs):
-    if not ("weatherEntity" in self.config and self.api.entity_exists(self.config["weatherEntity"])):
-      return
-    we = self.api.get_entity(self.config["weatherEntity"])
-    unit = "°C"
-
-    icon_cur        = get_icon_id_ha("weather", state=we.state)
-    text_cur        = f"{we.attributes.temperature}{unit}"
-    icon_cur_detail = get_icon_id("water-percent")
-    text_cur_detail = f"{we.attributes.humidity} %"
-
-    up1   = we.attributes.forecast[0]['datetime']
-    up1   = datetime.datetime.fromisoformat(up1)
-    icon1 = get_icon_id_ha("weather", state=we.attributes.forecast[0]['condition'])
-    down1 = we.attributes.forecast[0]['temperature']
-
-    up2   = we.attributes.forecast[1]['datetime']
-    up2   = datetime.datetime.fromisoformat(up2)
-    icon2 = get_icon_id_ha("weather", state=we.attributes.forecast[1]['condition'])
-    down2 = we.attributes.forecast[1]['temperature']
-
-    global babel_spec
-    if babel_spec is not None:
-      up1 = babel.dates.format_date(up1, "E", locale=self.config["locale"])
-      up2 = babel.dates.format_date(up2, "E", locale=self.config["locale"])
-    else:
-      up1 = up1.strftime("%a")
-      up2 = up2.strftime("%a")
-
-    self.send_mqtt_msg(f"weatherUpdate,?{icon_cur}?{text_cur}?{icon_cur_detail}?{text_cur_detail}?{up1}?{icon1}?{down1}?{up2}?{icon2}?{down2}")
-
-
-  def handle_button_press(self, entity_id, btype, optVal=None):
-    if entity_id == "updateBerryNoYes" and optVal == "yes":
-      # go back to main page before starting the update
-      self.generate_page(self.current_page_nr)
-      self.updater.update_berry_driver()
-    elif entity_id == "updateBerryNoYes" and optVal == "no":
-      self.generate_page(self.current_page_nr)
-
-    if entity_id == "updateDisplayNoYes" and optVal == "yes":
-      self.updater.update_panel_driver()
-    elif entity_id == "updateDisplayNoYes" and optVal == "no":
-      self.generate_page(self.current_page_nr)
-
-    if btype == "OnOff":
-      if optVal == "1":
-        self.api.turn_on(entity_id)
-      else:
-        self.api.turn_off(entity_id)
-    if btype == "up":
-      self.api.get_entity(entity_id).call_service("open_cover")
-    if btype == "stop":
-      self.api.get_entity(entity_id).call_service("stop_cover")
-    if btype == "down":
-      self.api.get_entity(entity_id).call_service("close_cover")
-      
-    if btype == "button":
-      if entity_id.startswith('scene'):
-        self.api.get_entity(entity_id).call_service("turn_on")
-      elif entity_id.startswith('light') or entity_id.startswith('switch') or entity_id.startswith('input_boolean'):
-        self.api.get_entity(entity_id).call_service("toggle")
-      else:
-        self.api.get_entity(entity_id).call_service("press")
-
-    if btype == "media-next":
-      self.api.get_entity(entity_id).call_service("media_next_track")
-    if btype == "media-back":
-      self.api.get_entity(entity_id).call_service("media_previous_track")
-    if btype == "media-pause":
-      self.api.get_entity(entity_id).call_service("media_play_pause")
-
-    if btype == "hvac_action":
-      self.api.get_entity(entity_id).call_service("set_hvac_mode", hvac_mode=optVal)
-
-
-    if btype == "brightnessSlider":
-      # scale 0-100 to ha brightness range
-      brightness = int(scale(int(optVal),(0,100),(0,255)))
-      self.api.get_entity(entity_id).call_service("turn_on", brightness=brightness)
-      
-    if btype == "colorTempSlider":
-      entity = self.api.get_entity(entity_id)
-      #scale 0-100 from slider to color range of lamp
-      color_val = scale(int(optVal), (0, 100), (entity.attributes.min_mireds, entity.attributes.max_mireds))
-      self.api.get_entity(entity_id).call_service("turn_on", color_temp=color_val)
-
-    if btype == "colorWheel":
-      self.api.log(optVal)
-      optVal = optVal.split('|')
-      color = pos_to_color(int(optVal[0]), int(optVal[1]))
-      self.api.log(color)
-      self.api.get_entity(entity_id).call_service("turn_on", rgb_color=color)
-      
-    if btype == "positionSlider":
-      pos = int(optVal)
-      self.api.get_entity(entity_id).call_service("set_cover_position", position=pos)
-
-    if btype == "volumeSlider":
-      pos = int(optVal)
-      # HA wants this value between 0 and 1 as float
-      pos = pos/100
-      self.api.get_entity(entity_id).call_service("volume_set", volume_level=pos)
-
-    if btype == "tempUpd":
-      temp = int(optVal)/10
-      self.api.get_entity(msg[3]).call_service("set_temperature", temperature=temp)
-
-  def generate_page(self, page_number):
-    # get type of page
-    page_type = self.config["pages"][self.current_page_nr]["type"]
-    self.api.log("Generating page commands for page %i with type %s", self.current_page_nr, page_type, level="DEBUG")
-
-    # Send page type
-    self.send_mqtt_msg(f"pageType,{page_type}")
-
-    if page_type in ["cardEntities", "cardGrid"]:
-      self.generate_entities_page(self.config["pages"][self.current_page_nr]["items"])
-
-    if page_type == "cardThermo":
-      self.generate_thermo_page(self.config["pages"][self.current_page_nr]["item"])
-      
-    if page_type == "cardMedia":
-      self.generate_media_page(self.config["pages"][self.current_page_nr]["item"])
-
-  def generate_entities_item(self, item):
-    icon = None
-    if type(item) is dict:
-      icon = next(iter(item.items()))[1]['icon']
-      item = next(iter(item.items()))[0]
-
-    # type of the item is the string before the "." in the item name
-    item_type = item.split(".")[0]
-
-    self.api.log("Generating item command for %s with type %s", item, item_type, level="DEBUG")
-
-    if item_type == "delete":
-      return f",{item_type},,,,,"
-
-    if not self.api.entity_exists(item):
-      return f",text,{item},{get_icon_id('alert-circle-outline')},17299,Not found check, apps.yaml"
-
-    entity = self.api.get_entity(item)
-    name = entity.attributes.friendly_name
-
-    if item_type == "cover":
-      icon_id = get_icon_id_ha("cover", state=entity.state, overwrite=icon)
-      return f",shutter,{item},{icon_id},17299,{name},"
-
-    if item_type == "light":
-      switch_val = 1 if entity.state == "on" else 0
-      icon_color = self.getEntityColor(entity)
-      icon_id = get_icon_id_ha("light", overwrite=icon)
-      return f",{item_type},{item},{icon_id},{icon_color},{name},{switch_val}"
-
-    if item_type == "switch" or item_type == "input_boolean":
-      icon_id = get_icon_id_ha(item_type, state=entity.state, overwrite=icon)
-      switch_val = 1 if entity.state == "on" else 0
-      icon_color = self.getEntityColor(entity)
-      return f",switch,{item},{icon_id},{icon_color},{name},{switch_val}"
-
-    if item_type in ["sensor", "binary_sensor"]:
-      device_class = self.get_safe_ha_attribute(entity.attributes, "device_class", "")
-      icon_id = get_icon_id_ha("sensor", state=entity.state, device_class=device_class, overwrite=icon)
-      unit_of_measurement = self.get_safe_ha_attribute(entity.attributes, "unit_of_measurement", "")
-      value = entity.state + " " + unit_of_measurement
-      return f",text,{item},{icon_id},17299,{name},{value}"
-
-    if item_type in ["button", "input_button"]:
-      icon_id = get_icon_id_ha("button", overwrite=icon)
-      return f",button,{item},{icon_id},17299,{name},PRESS"
-    
-    if item_type == "scene":
-      icon_id = get_icon_id_ha("scene", overwrite=icon)
-      return f",button,{item},{icon_id},17299,{name},ACTIVATE"
-
-  def generate_entities_page(self, items):
-    # Set Heading of Page
-    self.send_mqtt_msg(f"entityUpdHeading,{self.config['pages'][self.current_page_nr]['heading']}")
-    # Get items and construct cmd string
-    command = "entityUpd"
-    for item in items:
-      command += self.generate_entities_item(item)
-    self.send_mqtt_msg(command)
-
-  def get_safe_ha_attribute(self, eattr, attr, default):
-    return eattr[attr] if attr in eattr else default
-
-  def generate_thermo_page(self, item):
-    if not self.api.entity_exists(item):
-      command = f"entityUpd,{item},Not found,220,220,Not found,150,300,5"
-    else:
-      entity       = self.api.get_entity(item)
-      heading      = entity.attributes.friendly_name
-      current_temp = int(self.get_safe_ha_attribute(entity.attributes, "current_temperature", 0)*10)
-      dest_temp    = int(self.get_safe_ha_attribute(entity.attributes, "temperature", 0)*10)
-      status       = self.get_safe_ha_attribute(entity.attributes, "hvac_action", "")
-      min_temp     = int(self.get_safe_ha_attribute(entity.attributes, "min_temp", 0)*10) 
-      max_temp     = int(self.get_safe_ha_attribute(entity.attributes, "max_temp", 0)*10) 
-      step_temp    = int(self.get_safe_ha_attribute(entity.attributes, "target_temp_step", 0.5)*10) 
-
-      icon_res = ""
-      hvac_modes = self.get_safe_ha_attribute(entity.attributes, "hvac_modes", [])
-      for mode in hvac_modes:
-        icon_id = get_icon_id('alert-circle-outline')
-        color_on = 64512
-        if mode == "auto":
-          icon_id = get_icon_id("calendar-sync")
-          color_on = 1024
-        if mode == "heat":
-          icon_id = get_icon_id("fire")
-          color_on = 64512
-        if mode == "off":
-          icon_id = get_icon_id("power")
-          color_on = 35921
-        if mode == "cool":
-          icon_id = get_icon_id("snowflake")
-          color_on = 11487
-        if mode == "dry":
-          icon_id = get_icon_id("water-percent")
-          color_on = 60897
-        if mode == "fan_only":
-          icon_id = get_icon_id("fan")
-          color_on = 35921
-        state = 0
-        if(mode == entity.state):
-          state = 1
-        icon_res += f",{icon_id},{color_on},{state},{mode}"
-  
-      len_hvac_modes = len(hvac_modes)
-      if len_hvac_modes%2 == 0:
-        # even
-        padding_len = int((4-len_hvac_modes)/2)
-        icon_res =  ","*4*padding_len + icon_res + ","*4*padding_len
-        # use last 4 icons
-        icon_res =  ","*4*5 + icon_res
-      else:
-        # uneven
-        padding_len = int((5-len_hvac_modes)/2)
-        icon_res =  ","*4*padding_len + icon_res + ","*4*padding_len
-        # use first 5 icons
-        icon_res = icon_res + ","*4*4
-      command = f"entityUpd,{item},{heading},{current_temp},{dest_temp},{status},{min_temp},{max_temp},{step_temp}{icon_res}"
-    self.send_mqtt_msg(command)
-
-  def generate_media_page(self, item):
-
-    if not self.api.entity_exists(item):
-      command = f"entityUpd,|{item}|Not found|{get_icon_id('alert-circle-outline')}|Please check your|apps.yaml in AppDaemon|50|11"
-    else:
-      entity       = self.api.get_entity(item)
-      heading      = entity.attributes.friendly_name
-      icon         = 0
-      title        = self.get_safe_ha_attribute(entity.attributes, "media_title", "")
-      author       = self.get_safe_ha_attribute(entity.attributes, "media_artist", "")
-      volume       = int(self.get_safe_ha_attribute(entity.attributes, "volume_level", 0)*100)
-      iconplaypause = get_icon_id("pause") if entity.state == "playing" else get_icon_id("play")
-      if "media_content_type" in entity.attributes:
-        if entity.attributes.media_content_type == "music":
-          icon = get_icon_id("music")
-      command = f"entityUpd,|{item}|{heading}|{icon}|{title}|{author}|{volume}|{iconplaypause}"
-
-    self.send_mqtt_msg(command)
-
-  def getEntityColor(self, entity):
-    attr = entity.attributes
-    default_color_on  = rgb_dec565([253, 216, 53])
-    default_color_off = rgb_dec565([68, 115, 158])
-    icon_color = default_color_on if entity.state == "on" else default_color_off
-
-    if "rgb_color" in attr:
-      color = attr.rgb_color
-      if "brightness" in attr:
-        color = rgb_brightness(color, attr.brightness)
-      icon_color = rgb_dec565(color)
-    elif "brightness" in attr:
-      color = rgb_brightness([253, 216, 53], attr.brightness)
-      icon_color = rgb_dec565(color)
-    return icon_color
-
-  def generate_light_detail_page(self, entity):
-    entity = self.api.get_entity(entity)
-    switch_val = 1 if entity.state == "on" else 0
-    icon_color = self.getEntityColor(entity)
-    brightness = "disable"
-    color_temp = "disable"
-    color = "disable"
-    # scale 0-255 brightness from ha to 0-100
-    if entity.state == "on":
-      if "brightness" in entity.attributes:
-        brightness = int(scale(entity.attributes.brightness,(0,255),(0,100)))
-      else:
-        brightness = "disable"
-      if "color_temp" in entity.attributes.supported_color_modes:
-        if "color_temp" in entity.attributes:
-          # scale ha color temp range to 0-100
-          color_temp = int(scale(entity.attributes.color_temp,(entity.attributes.min_mireds, entity.attributes.max_mireds),(0,100)))
-        else:
-          color_temp = "unknown"
-      else:
-        color_temp = "disable"
-        
-      list_color_modes = ["xy", "rgb", "rgbw", "hs"]
-      if any(item in list_color_modes for item in entity.attributes.supported_color_modes):
-        color = "enable"
-      else:
-        color = "disable"
-    self.send_mqtt_msg(f"entityUpdateDetail,{get_icon_id('lightbulb')},{icon_color},{switch_val},{brightness},{color_temp},{color}")
-
-  def generate_shutter_detail_page(self, entity):
-    pos = int(self.get_safe_ha_attribute(entity.attributes, "current_position", 50))
-    # reverse position for slider
-    pos = 100-pos
-    self.send_mqtt_msg(f"entityUpdateDetail,{pos}")
-
-  def send_message_page(self, id, heading, msg, b1, b2):
-    self.send_mqtt_msg(f"pageType,popupNotify")
-    self.send_mqtt_msg(f"entityUpdateDetail,|{id}|{heading}|65535|{b1}|65535|{b2}|65535|{msg}|65535|0")
 
+        LOGGER.info('Started')

info.md

@@ -5,14 +5,15 @@ Checkout [README](https://github.com/joBr99/nspanel-lovelace-ui/blob/main/README
 ### App Configuration
 
 ```yaml
+---
 nspanel-1:
   module: nspanel-lovelace-ui
   class: NsPanelLovelaceUIManager
   config:
     panelRecvTopic: "tele/tasmota_your_mqtt_topic/RESULT"
     panelSendTopic: "cmnd/tasmota_your_mqtt_topic/CustomSend"
-    updateMode: auto-notify # possible values are auto, auto-notify and manual
+    updateMode: "auto-notify"
-    timeoutScreensaver: 15 #in seconds
+    timeoutScreensaver: 20
     #brightnessScreensaver: 10
     brightnessScreensaver:
       - time: "7:00:00"
@@ -24,7 +25,7 @@ nspanel-1:
                             # formatting options on https://babel.pocoo.org/en/latest/dates.html?highlight=name%20of%20day#date-fields
     timeFormat: "%H:%M"
     dateFormat: "%A, %d. %B %Y" # ignored if babel python package is installed
-    weatherEntity: weather.example
+    weather: weather.example
     pages:
       - type: cardEntities
         heading: Example Page 1

ioBroker/NsPanelTs.ts

@@ -92,8 +92,6 @@ export const config: Config = {
     button2Page: button2Page
 };
 
-
-
 var subscriptions: any = {};
 
 var pageId = 0;
@@ -149,28 +147,29 @@ function SendToPanel(val: Payload | Payload[]): void {
 
 function HandleMessage(typ: string, method: string, page: number, words: Array<string>): void {
     if (typ == "event") {
-        var pageNum = (page % config.pages.length);
-        pageId = Math.abs(pageNum);
 
-        if (method == 'pageOpen' || method == 'startup') {
+        switch (method) {
-            UnsubscribeWatcher();
+            case "pageOpen":
-
+                var pageNum = (page % config.pages.length);
-            if (method == 'startup')
+                pageId = Math.abs(pageNum);
+                UnsubscribeWatcher();
+                GeneratePage(config.pages[pageId]);
+                break;
+            case "startup":
+                UnsubscribeWatcher();
                 HandleStartupProcess();
-
+                break;
-            GeneratePage(config.pages[pageId]);
+            case "buttonPress2":
-        }
+                HandleButtonEvent(words);
-
+                break;
-        if (method == 'buttonPress' || method == "tempUpd") {
+            case "screensaverOpen":
-            HandleButtonEvent(words)
+                HandleScreensaver();
-        }
+                break;
-
+            case "button1":
-        if (method == 'screensaverOpen') {
+            case "button2":
-            HandleScreensaver()
+                HandleHardwareButton(method);
-        }
+            default:
-
+                break;
-        if (method == 'button1' || method == 'button2') {
-            HandleHardwareButton(method);
         }
     }
 }
@@ -276,11 +275,11 @@ function CreateEntity(pageItem: PageItem, placeId: number, useColors: boolean =
 
         if (existsState(pageItem.id + ".GET")) {
             val = getState(pageItem.id + ".GET").val;
-            RegisterEntityWatcher(pageItem.id + ".GET", pageItem.id, placeId);
+            RegisterEntityWatcher(pageItem.id + ".GET");
         }
         else if (existsState(pageItem.id + ".SET")) {
             val = getState(pageItem.id + ".SET").val;
-            RegisterEntityWatcher(pageItem.id + ".SET", pageItem.id, placeId);
+            RegisterEntityWatcher(pageItem.id + ".SET");
         }
         var iconColor = rgb_dec565(config.defaultColor);
 
@@ -303,11 +302,11 @@ function CreateEntity(pageItem: PageItem, placeId: number, useColors: boolean =
                 var optVal = "0"
                 if (existsState(pageItem.id + ".ON_ACTUAL")) {
                     val = getState(pageItem.id + ".ON_ACTUAL").val;
-                    RegisterEntityWatcher(pageItem.id + ".ON_ACTUAL", pageItem.id, placeId);
+                    RegisterEntityWatcher(pageItem.id + ".ON_ACTUAL");
                 }
                 else if (existsState(pageItem.id + ".ON_SET")) {
                     val = getState(pageItem.id + ".ON_SET").val;
-                    RegisterEntityWatcher(pageItem.id + ".ON_SET", pageItem.id, placeId);
+                    RegisterEntityWatcher(pageItem.id + ".ON_SET");
                 }
                 if (val === true || val === "true") {
                     optVal = "1"
@@ -331,12 +330,12 @@ function CreateEntity(pageItem: PageItem, placeId: number, useColors: boolean =
                 if (existsState(pageItem.id + ".ON_ACTUAL")) {
                     optVal = getState(pageItem.id + ".ON_ACTUAL").val;
                     unit = GetUnitOfMeasurement(pageItem.id + ".ON_ACTUAL");
-                    RegisterEntityWatcher(pageItem.id + ".ON_ACTUAL", pageItem.id, placeId);
+                    RegisterEntityWatcher(pageItem.id + ".ON_ACTUAL");
                 }
                 else if (existsState(pageItem.id + ".ACTUAL")) {
                     optVal = getState(pageItem.id + ".ACTUAL").val;
                     unit = GetUnitOfMeasurement(pageItem.id + ".ACTUAL");
-                    RegisterEntityWatcher(pageItem.id + ".ACTUAL", pageItem.id, placeId);
+                    RegisterEntityWatcher(pageItem.id + ".ACTUAL");
                 }
 
                 if (o.common.role == "value.temperature") {
@@ -384,11 +383,12 @@ function GetIconColor(pageItem: PageItem, value: (boolean | number), useColors:
     return rgb_dec565(pageItem.offColor !== undefined ? pageItem.offColor : config.defaultOffColor);
 }
 
-function RegisterEntityWatcher(id: string, entityId: string, placeId: number): void {
+function RegisterEntityWatcher(id: string): void {
     if (subscriptions.hasOwnProperty(id)) {
         return;
     }
     subscriptions[id] = (on({ id: id, change: 'any' }, function (data) {
+        log("RegisterEntityWatcher PageId:" + pageId.toString())
         GeneratePage(config.pages[pageId]);
     }))
 }
@@ -477,11 +477,11 @@ function toggleState(id: string): boolean {
 }
 
 function HandleButtonEvent(words): void {
-    let id = words[4]
+    let id = words[2]
 
-    if (words[6] == "OnOff" && existsObject(id)) {
+    if (words[3] == "OnOff" && existsObject(id)) {
         var action = false
-        if (words[7] == "1")
+        if (words[4] == "1")
             action = true
         let o = getObject(id)
         switch (o.common.role) {
@@ -496,31 +496,28 @@ function HandleButtonEvent(words): void {
         }
     }
 
-    if (words[6] == "up")
+    if (words[3] == "up")
         setState(id + ".OPEN", true)
-    if (words[6] == "stop")
+    if (words[3] == "stop")
         setState(id + ".STOP", true)
-    if (words[6] == "down")
+    if (words[3] == "down")
         setState(id + ".CLOSE", true)
-    if (words[6] == "button") {
+    if (words[3] == "button") {
-        let switchOn = true;
-        if (words[5] !== "1")
-            switchOn = false;
         toggleState(id + ".SET") ? true : toggleState(id + ".ON_SET")
     }
-    if (words[6] == "positionSlider")
+    if (words[3] == "positionSlider")
-        setState(id + ".SET", parseInt(words[7]))
+        setState(id + ".SET", parseInt(words[4]))
 
-    if (words[6] == "brightnessSlider")
+    if (words[3] == "brightnessSlider")
         if (existsState(id + ".SET"))
-            setState(id + ".SET", parseInt(words[7]));
+            setState(id + ".SET", parseInt(words[4]));
         else if (existsState(id + ".ACTUAL"))
-            setState(id + ".ACTUAL", parseInt(words[7]));
+            setState(id + ".ACTUAL", parseInt(words[4]));
     //     out_msgs.push({ payload: id, action: "turn_on", domain: "lightBrightness", brightness: parseInt(words[7]) })
     // if (words[6] == "colorTempSlider")
     //     out_msgs.push({ payload: id, action: "turn_on", domain: "lightTemperature", temperature: parseInt(words[7]) })
-    if (words[1] == "tempUpd") {
+    if (words[3] == "tempUpd") {
-        setState(words[3] + ".SET", parseInt(words[4]) / 10)
+        setState(id + ".SET", parseInt(words[4]) / 10)
     }
 }