diff --git a/docs/prepare_nspanel2.md b/docs/prepare_nspanel2.md
new file mode 100644
index 00000000..b9ed2fc8
--- /dev/null
+++ b/docs/prepare_nspanel2.md
@@ -0,0 +1,51 @@
+# Flash Tasmota to your NSPanel
+
+You need to connect to your nspanel via serial and flash tasmtoa [tasmota32-nspanel.factory.bin](https://tasmota.github.io/install/firmware/development/tasmota32-nspanel.factory.bin) to your NSPanel. 
+You can use the Tasmota Web Installer to do so. [Tasmota Web Installer](https://tasmota.github.io/install/)
+
+Checkout Blakadders Template Repo for more information on flashing, do not use the autoexec.be from this page.
+[NSPanel Page of the Tasmota Template Repository](https://templates.blakadder.com/sonoff_NSPanel.html)
+
+## Configure Tasmota Template for NSPanel
+
+Configure the NSPanel template for Tasmota. (Go to Configuration and Configure Other and paste the template there, make sure to tick the activate checkbox)
+
+![tasmota-template-config](img/tasmota-template-config.png)
+
+You can use the following template or copy the one on the [Tasmota Template Repo Site](https://templates.blakadder.com/sonoff_NSPanel.html).
+
+`{"NAME":"NSPanel","GPIO":[0,0,0,0,3872,0,0,0,0,0,32,0,0,0,0,225,0,480,224,1,0,0,0,33,0,0,0,0,0,0,0,0,0,0,4736,0],"FLAG":0,"BASE":1,"CMND":"ADCParam 2,11200,10000,3950 | Sleep 0 | BuzzerPWM 1"}`
+
+After a reboot of tasmota your screen will light up with the stock display firmware.
+
+## Upload Berry Driver to Tasmota
+
+1. Download the autoexec.be from the repository: [Berry Driver](https://github.com/joBr99/nspanel-lovelace-ui/blob/main/tasmota/autoexec.be)
+
+2. Go to `Consoles` > `Manage File System` in Tasmota and upload the previously downloaded file.
+
+3. Restart your NSPanel
+
+## Flash Firmware to Nextion Screen
+
+Due the limitations of Berry, it's not possible to download the tft file directly from github, so I'm also renting a small server where you can download the file via HTTP.
+
+Use the one following commands to flash the latest release from this repository, just execute the following Command in Tasmota:
+
+EU Version: `FlashNextion http://nspanel.pky.eu/lui-release.tft`
+
+US Version Portrait: `FlashNextion http://nspanel.pky.eu/lui-us-p-release.tft`
+
+US Version Landscape: `FlashNextion http://nspanel.pky.eu/lui-us-l-release.tft`
+
+<details>
+<summary>Alternatively you can use your own webserver or the one build into HomeAssistant:</summary>
+<br>
+Upload the nspanel.tft from the lastest release to a Webserver (for example www folder of Home Assistant) and execute the following command in Tasmota Console. (Development Version: [tft file from HMI folder](HMI/nspanel.tft))
+
+**Webserver must be HTTP, HTTPS is not supported, due to limitations of berry lang on tasmota**
+
+`FlashNextion http://ip-address-of-your-homeassistant:8123/local/nspanel.tft`
+</details>
+
+
diff --git a/mkdocs.yml b/mkdocs.yml
index 2b3b1719..e9df382b 100644
--- a/mkdocs.yml
+++ b/mkdocs.yml
@@ -82,5 +82,5 @@ nav:
 
 
     - "Getting started (ioBroker)":
-        - "Prepare NsPanel": prepare_nspanel.md
+        - "Prepare NsPanel": prepare_nspanel2.md
         - "Prepare ioBroker": iobroker-install.md
\ No newline at end of file