Yannic Schroeder f100d75c19 stm32f1: Always read SPI receive buffer ...

Otherwise the first byte read via SPI may be the last byte
of the previous transfer

Signed-off-by: Yannic Schroeder <schroeder@ibr.cs.tu-bs.de>

2018-12-14 12:25:35 -05:00

..

adc.c

stm32f1: Move ADC and SPI code from gpio.c to spi.c and adc.c

2018-11-30 11:42:54 -05:00

gpio.c

stm32f1: Move ADC and SPI code from gpio.c to spi.c and adc.c

2018-11-30 11:42:54 -05:00

gpio.h

stm32f1: Add support for gpio_x_reset()

2018-08-27 12:45:01 -04:00

internal.h

stm32f1: Move ADC and SPI code from gpio.c to spi.c and adc.c

2018-11-30 11:42:54 -05:00

Kconfig

stm32f1: Add support for building with bootloader support

2018-10-11 10:50:51 -04:00

main.c

stm32f1: Add support for building with bootloader support

2018-10-11 10:50:51 -04:00

Makefile

stm32f1: Move ADC and SPI code from gpio.c to spi.c and adc.c

2018-11-30 11:42:54 -05:00

serial.c

stm32f1: Serial should have a higher irq priority than timers

2018-10-11 10:50:51 -04:00

spi.c

stm32f1: Always read SPI receive buffer

2018-12-14 12:25:35 -05:00

stm32f1.ld

stm32f1: Add support for building with bootloader support

2018-10-11 10:50:51 -04:00

timer.c

stm32f1: Use __always_inline on timer_read_time

2018-10-11 22:20:02 -04:00

usbserial.c

stm32f1: Pull the USB D+ line low briefly to signal a device connect

2018-10-11 10:50:51 -04:00