Kevin O'Connor ce064e6e2d bltouch: Always make sure to check the endstop at least every 1ms ...

Some of the bltouch implementations may only respond to a probe event
with a 5ms pulse.  Make sure to check the signal pin at least every
millisecond to ensure no signal is lost.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>

2018-12-16 11:06:27 -05:00

..

chelper

chelper: Add a quick __main__ to compile c helper (#782)

2018-10-16 12:21:18 -04:00

extras

bltouch: Always make sure to check the endstop at least every 1ms

2018-12-16 11:06:27 -05:00

kinematics

delta: Make sure to clear limit_xy2 after a homing move

2018-10-27 11:54:17 -04:00

clocksync.py

clocksync: Simplify is_active() check

2018-05-31 18:20:30 -04:00

configfile.py

configfile: Strip trailing comments

2018-10-16 11:45:20 -04:00

console.py

console: Try to improve the description of the SUPPRESS command

2018-11-16 17:16:14 -05:00

gcode.py

gcode: process_batch() should execute commands atomically

2018-10-28 18:39:45 -04:00

heater.py

heater: Add new TURN_OFF_HEATERS command

2018-09-18 16:01:07 -04:00

homing.py

endstop_phase: Move endstop phase homing code to new "extras" module

2018-10-16 13:09:23 -04:00

klippy.py

klippy: No need to return anything from _connect() method

2018-10-18 15:58:52 -04:00

mathutil.py

delta_calibrate: Perform coordinate descent in a background process

2018-10-15 19:01:19 -04:00

mcu.py

mcu: Add a set_commanded_position() method to MCU_stepper

2018-10-10 14:30:09 -04:00

msgproto.py

msgproto: Add support for a get_constant_int() method

2018-05-28 10:43:40 -04:00

parsedump.py

build: Request python2 for all directly executed python binaries

2017-06-27 20:26:02 -04:00

pins.py

avr: Add initial support for atmega32u4 chips

2018-11-20 12:58:33 -05:00

queuelogger.py

klippy: Automatically clear rollover_info on each restart

2018-04-03 13:18:52 -04:00

reactor.py

reactor: Add ability to register callbacks

2018-06-30 14:13:47 -04:00

serialhdl.py

serialqueue: Limit message transmission to available receive buffer size

2018-05-28 11:12:30 -04:00

stepper.py

endstop_phase: Move endstop phase homing code to new "extras" module

2018-10-16 13:09:23 -04:00

toolhead.py

idle_timeout: Add printing/ready/idle tracking

2018-10-28 18:39:45 -04:00

util.py

util: Fix versioning when gitdir is absent (#809)

2018-10-27 10:44:38 -04:00