Kevin O'Connor 9755182adf homing: Check homing distance to verify endstop trigger after retract ...

Instead of checking the endstop trigger directly after a retract move,
verify some distance is traveled during the following homing
operation.  This reduces the amount of synchronization between mcu and
host during homing.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>

2016-11-28 11:23:26 -05:00

..

cartesian.py

homing: Check homing distance to verify endstop trigger after retract

2016-11-28 11:23:26 -05:00

chelper.py

delta: Initial support for linear delta kinematics

2016-11-14 12:35:36 -05:00

console.py

console: Update the debugging console to support setting local varables

2016-06-13 23:18:58 -04:00

delta.py

homing: Check homing distance to verify endstop trigger after retract

2016-11-28 11:23:26 -05:00

extruder.py

mcu: Store the stepper position in the mcu_stepper class

2016-11-19 11:34:42 -05:00

fan.py

mcu: Convert PWM and ADC objects to take mcu_time instead of clock

2016-08-24 15:16:02 -04:00

gcode.py

homing: Check homing distance to verify endstop trigger after retract

2016-11-28 11:23:26 -05:00

heater.py

heater: Do not require target temperature be above min_extrude_temp

2016-11-08 09:22:43 -05:00

homing.py

homing: Check homing distance to verify endstop trigger after retract

2016-11-28 11:23:26 -05:00

klippy.py

mcu: Remove support for DummyMCU class

2016-11-16 12:09:26 -05:00

list.h

Initial commit of source code.

2016-05-25 11:37:40 -04:00

mcu.py

mcu: Track the stepper position in the MCU in the MCU_stepper class

2016-11-28 11:22:01 -05:00

msgproto.py

Initial commit of source code.

2016-05-25 11:37:40 -04:00

parsedump.py

Initial commit of source code.

2016-05-25 11:37:40 -04:00

pins.py

pins: Add Arduino Due pin name aliases

2016-06-14 15:41:18 -04:00

queuelogger.py

queuelogger: Add support for background log writing

2016-11-12 22:53:43 -05:00

reactor.py

Initial commit of source code.

2016-05-25 11:37:40 -04:00

serialhdl.py

serialhdl: Calculate baudadjust from MCU's baud instead of host baud

2016-07-16 21:33:35 -04:00

serialqueue.c

serialhdl: Calculate baudadjust from MCU's baud instead of host baud

2016-07-16 21:33:35 -04:00

serialqueue.h

serialhdl: Calculate baudadjust from MCU's baud instead of host baud

2016-07-16 21:33:35 -04:00

stepcompress.c

stepcompress: Don't bother loop unrolling in push_sqrt()

2016-11-14 15:36:11 -05:00

stepper.py

stepper: Raise an EndstopError if invalid phase found during homing

2016-11-18 14:39:48 -05:00

toolhead.py

homing: Direct stepper phase detection from kinematic classes

2016-11-18 14:04:10 -05:00

util.py

Initial commit of source code.

2016-05-25 11:37:40 -04:00