h3n3/klipper
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
Files
52b07f467e2f4c8ab2eeefe35d43db2b9f5a09a7
klipper/src
History
Kevin O'Connor 8176ba22aa stm32: Turn on can.c error interrupts 
It seems both ERRIE and LECIE must be enabled to get hardware error
interrupts.  Without this, the rx_error and tx_error reports are
likely to always be zero.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2025-04-03 13:32:23 -04:00
..
ar100
stepper: Support step on both edges with custom minimum pulse duration
2025-03-20 19:56:55 -04:00
atsam
stepper: Support step on both edges with custom minimum pulse duration
2025-03-20 19:56:55 -04:00
atsamd
stepper: Support step on both edges with custom minimum pulse duration
2025-03-20 19:56:55 -04:00
avr
sched: Improve timer vs task priority check
2024-10-26 22:09:14 -04:00
generic
usb_canbus: Send echo frame before processing the frame
2025-02-27 13:24:19 -05:00
hc32f460
stepper: Support step on both edges with custom minimum pulse duration
2025-03-20 19:56:55 -04:00
linux
sched: Improve timer vs task priority check
2024-10-26 22:09:14 -04:00
lpc176x
stepper: Support step on both edges with custom minimum pulse duration
2025-03-20 19:56:55 -04:00
pru
command: Support 2-byte message ids
2024-06-10 12:27:12 -04:00
rp2040
rp2040: define spi bus on pins 12,11,10
2025-03-25 18:53:46 -04:00
simulator
command: Fix handling of buffer passing in args[] on 64bit mcu
2020-10-30 14:04:12 -04:00
stm32
stm32: Turn on can.c error interrupts
2025-04-03 13:32:23 -04:00
adccmds.c
adccmds: Run gpio_adc_setup() before oid_alloc()
2019-01-13 11:03:30 -05:00
basecmd.c
mcu: Make a minor change to the protocol to require mcu update
2021-11-06 18:47:44 -04:00
basecmd.h
stepper: Use a reusable interface to the "move queue"
2020-12-04 16:10:13 -05:00
buttons.c
buttons: initialize mcu buttons based on inverted state
2019-07-05 20:01:07 -04:00
byteorder.h
byteorder: Add a header file defining common byteswap functions
2018-05-21 09:44:40 -04:00
command.c
command: Support 2-byte message ids
2024-06-10 12:27:12 -04:00
command.h
command: Support 2-byte message ids
2024-06-10 12:27:12 -04:00
compiler.h
compiler.h: Check if __aligned and __section macros are already defined
2016-06-13 23:18:59 -04:00
ctr.h
ctr: Encode negative integers in normal hex notation
2019-08-22 13:06:44 -04:00
debugcmds.c
debugcmds: Remove start/end_group commands
2021-05-07 13:53:47 -04:00
endstop.c
trsync: Introduce new "trigger synchronization" support
2021-06-09 18:58:35 -04:00
gpiocmds.c
gpiocmds: Merge digital output and soft pwm code
2020-12-10 12:06:26 -05:00
i2c_software.c
i2c_software: forward errors to i2ccmd
2024-10-26 22:06:30 -04:00
i2c_software.h
i2c: handle errors at i2ccmds
2024-10-26 22:06:30 -04:00
i2ccmds.c
i2ccmds: move status checks to function
2024-10-26 22:06:30 -04:00
i2ccmds.h
ldc1612: shutdown on i2c errors
2024-10-26 22:06:30 -04:00
initial_pins.c
initial_pins: Add check to reduce compile time size when not in use
2022-12-16 22:46:47 -05:00
initial_pins.h
initial_pins: Add ability to configure output pins at mcu startup
2019-03-17 20:56:25 -04:00
Kconfig
stepper: Support disabling optimized "step on both edges" in "make menuconfig"
2025-03-20 19:56:55 -04:00
lcd_hd44780.c
lcd_st7920: Check CONFIG_MACH_AVR for slow mcus
2021-07-04 10:11:02 -04:00
lcd_st7920.c
lcd_st7920: Check CONFIG_MACH_AVR for slow mcus
2021-07-04 10:11:02 -04:00
Makefile
icm20948: Add support for ICM20948 accelerometer (#6756)
2025-03-04 17:12:26 -05:00
neopixel.c
neopixel: Fix neopixel_result message so that it contains an oid
2020-11-05 11:40:34 -05:00
pulse_counter.c
pulse_counter: Use "clock" suffix instead of "time" in commands
2021-04-30 11:40:37 -04:00
pwmcmds.c
pwmcmds: Use move queue for hard PWM
2020-12-04 16:10:13 -05:00
sched.c
sched: Improve timer vs task priority check
2024-10-26 22:09:14 -04:00
sched.h
sched: Improve timer vs task priority check
2024-10-26 22:09:14 -04:00
sdiocmds.c
stm32: Add sdio support
2023-02-20 19:55:25 -05:00
sdiocmds.h
stm32: Add sdio support
2023-02-20 19:55:25 -05:00
sensor_ads1220.c
src: Current code produces warnings for possible value overflows. (#6665)
2024-08-14 22:14:19 -04:00
sensor_adxl345.c
sensor_adxl345: No need to schedule start of bulk reading
2024-01-19 11:55:15 -05:00
sensor_angle.c
angle: mt6826s added support
2024-12-12 14:28:45 -05:00
sensor_bulk.c
sensor_bulk: New C file with helper code for sending bulk sensor measurements
2024-01-19 11:55:15 -05:00
sensor_bulk.h
sensor_bulk: Change maximum data size from 52 to 51 bytes
2024-06-10 12:27:12 -04:00
sensor_hx71x.c
sensor_hx71x: Signal an overflow from the timer handler
2024-08-14 22:17:10 -04:00
sensor_icm20948.c
icm20948: Add support for ICM20948 accelerometer (#6756)
2025-03-04 17:12:26 -05:00
sensor_ldc1612.c
ldc1612: shutdown on i2c errors
2024-10-26 22:06:30 -04:00
sensor_lis2dw.c
sensor_lis2dw: add lis3dh sensor and i2c communication
2024-11-12 19:50:48 -05:00
sensor_mpu9250.c
mpu: shutdown on i2c errors
2024-10-26 22:06:30 -04:00
spi_software.c
spi_software: Remove unused include file
2019-08-17 13:49:03 -04:00
spi_software.h
spi_software: Implementation of software spi
2019-02-13 11:52:20 -05:00
spicmds.c
Kconfig: Support selecting optional features on chips with small flash size
2023-06-08 12:59:30 -04:00
spicmds.h
sensor_angle: Add support for bulk querying of spi angle sensors
2022-03-29 20:34:46 -04:00
stepper.c
stepper: Support disabling optimized "step on both edges" in "make menuconfig"
2025-03-20 19:56:55 -04:00
stepper.h
trsync: Introduce new "trigger synchronization" support
2021-06-09 18:58:35 -04:00
thermocouple.c
thermocouple: Only shutdown on multiple consecutive sensor errors
2022-09-23 11:56:20 -04:00
tmcuart.c
command: Add command_decode_ptr() helper
2020-10-30 14:04:08 -04:00
trsync.c
trsync: Don't require callers of trsync_do_trigger() to disable irqs
2024-10-26 22:11:02 -04:00
trsync.h
trsync: Introduce new "trigger synchronization" support
2021-06-09 18:58:35 -04:00