h3n3/klipper
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Extruder: Add g-code to set extruder step_distance (#2598)

Browse Source 
Signed off by: David Smith <davidosmith@gmail.com>
This commit is contained in:
David Smith
2020-03-28 09:52:46 -04:00
committed by GitHub
parent 8f8cf7ef41
commit d4bf61262e
3 changed files with 27 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

6
docs/G-Codes.md
View File

@@ -162,6 +162,12 @@ The following standard commands are supported:
[SMOOTH_TIME=<pressure_advance_smooth_time>]`: Set pressure advance
parameters. If EXTRUDER is not specified, it defaults to the active
extruder.
- `SET_EXTRUDER_STEP_DISTANCE [EXTRUDER=<config_name>] [DISTANCE=<distance>]`:
Set a new value for the provided extruder's step_distance. Value is
not retained on Klipper reset. Use with caution, small changes can
result in excessive pressure between extruder and hot end. Do proper
calibration steps with filament before use. If 'DISTANCE' value is
not included command will return current step distance.
- `SET_STEPPER_ENABLE STEPPER=<config_name> ENABLE=[0|1]`: Enable or
disable only the given stepper. This is a diagnostic and debugging
tool and must be used with care. Disabling an axis motor does not