h3n3/klipper
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

docs: Point to beaglebone.md from the main installation document

Browse Source 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
This commit is contained in:
Kevin O'Connor
2017-10-11 20:50:24 -04:00
parent 00d541b767
commit d3eb148cfa
2 changed files with 9 additions and 7 deletions
Download Patch File Download Diff File Expand all files Collapse all files

12
docs/Installation.md
View File

@@ -1,15 +1,17 @@
These instructions assume the software will run on a Raspberry Pi
computer in conjunction with OctoPrint. It is recommended that a
Raspberry Pi 2 or Raspberry Pi 3 computer be used as the host
machine.
computer in conjunction with OctoPrint. (See the
[Beaglebone specific instructions](beaglebone.md) if using a
Beaglebone.) It is recommended that a Raspberry Pi 2 or Raspberry Pi 3
computer be used as the host machine.
It should be possible to run the Klipper host software on any computer
running a recent Linux distribution, but doing so will require Linux
admin knowledge to translate these installation instructions to the
particulars of that machine.
Klipper currently supports Atmel ATmega based micro-controllers and
Arduino Due (Atmel SAM3x8e ARM micro-controller) printers.
Klipper currently supports Atmel ATmega based micro-controllers,
Arduino Due (Atmel SAM3x8e ARM micro-controller), and
[Beaglebone PRU](beaglebone.md) based printers.
Prepping an OS image
====================