h3n3/klipper
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

docs: Reorganize layout of G-Codes.md

Browse Source 
Break listing up by module name.  Provide links to "extended"
commands. Sort reference by module name.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
This commit is contained in:
Kevin O'Connor
2022-01-29 12:54:07 -05:00
parent 9c4172784a
commit c80552f9e7
7 changed files with 1108 additions and 859 deletions
Download Patch File Download Diff File Expand all files Collapse all files

12
docs/Probe_Calibrate.md
View File

@@ -129,12 +129,12 @@ typical bed leveling procedures. It may be possible to tune the probe
speed and/or probe start height to improve the repeatability of the
probe. The `PROBE_ACCURACY` command allows one to run tests with
different parameters to see their impact - see the
[G-Codes document](G-Codes.md) for further details. If the probe
generally obtains repeatable results but has an occasional outlier,
then it may be possible to account for that by using multiple samples
on each probe - read the description of the probe `samples` config
parameters in the [config reference](Config_Reference.md#probe) for
more details.
[G-Codes document](G-Codes.md#probe_accuracy) for further details. If
the probe generally obtains repeatable results but has an occasional
outlier, then it may be possible to account for that by using multiple
samples on each probe - read the description of the probe `samples`
config parameters in the [config reference](Config_Reference.md#probe)
for more details.
If new probe speed, samples count, or other settings are needed, then
update the printer.cfg file and issue a `RESTART` command. If so, it