h3n3/klipper
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

docs: Try to be more clear that the "paper test" steps need to be run

Browse Source 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
This commit is contained in:
Kevin O'Connor
2019-05-24 22:34:24 -04:00
parent 7792b0f2bb
commit c77285287b
3 changed files with 24 additions and 20 deletions
Download Patch File Download Diff File Expand all files Collapse all files

21
docs/Probe_Calibrate.md
View File

@@ -53,14 +53,15 @@ tool.
This tool will perform an automatic probe, then lift the head, move
the nozzle over the location of the probe point, and start the manual
probe tool. Once the manual probe tool starts, perform the
["paper test"](Bed_Level.md#the-paper-test) to determine the actual
nozzle height at the given point.
probe tool. If the nozzle does not move to a position above the
automatic probe point, then `ABORT` the manual probe tool and perform
the XY probe offset calibration described above.
If the nozzle does not move to a position above the probe point, then
`ABORT` the manual probe tool and perform the XY probe offset
calibration described above.
After completing the "paper test", use the `ACCEPT` command to
accept the current Z height and then use the `SAVE_CONFIG` command to
save the given probe z_offset to the config file.
Once the manual probe tool starts, follow the steps described at
["the paper test"](Bed_Level.md#the-paper-test)) to determine the
actual distance between the nozzle and bed at the given location. Once
those steps are complete one can `ACCEPT` the position and save the
results to the config file with:
```
SAVE_CONFIG
```