h3n3/klipper
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

sx1509: Convert code to use generic i2c bus support

Browse Source 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
This commit is contained in:
Kevin O'Connor
2019-03-31 19:08:05 -04:00
parent 2e16be224e
commit be6b29fabf
4 changed files with 18 additions and 25 deletions
Download Patch File Download Diff File Expand all files Collapse all files

11
config/example-extras.cfg
View File

@@ -939,11 +939,14 @@
# prefix. Each expander provides a set of 16 pins (sx1509_my_sx1509:PIN_0 to
# sx1509_my_sx1509:PIN_15) which can be used in the printer configuration.
#[sx1509 my_sx1509]
#address:
#i2c_mcu: mcu
# The name of the micro-controller that the SX1509 chip is connected
# to. The default is "mcu".
#i2c_address:
# I2C address used by this expander. Depending on the hardware jumpers
# this is one out of the following addresses: 0x3E 0x3F 0x70 0x71. This
# parameter must be provided
#bus: 0
# this is one out of the following addresses: 62 63 112 113. This
# parameter must be provided.
#i2c_bus: 0
# If the I2C implementation of your microcontroller supports multiple I2C
# busses, you may specify the bus number here. The default is 0.