stm32f0: New target STM32F0 added.

Signed-off-by: Eugene Krashtan <Eugene.Krashtan@opensynergy.com>
2019-03-11 12:47:58 +02:00
parent 74c6a85cde
commit b822f38923
16 changed files with 1668 additions and 0 deletions
--- a/src/stm32f0/gpio.c
+++ b/src/stm32f0/gpio.c
@@ -0,0 +1,141 @@
+/*
+ *  GPIO functions on STM32F042 boards.
+ *
+ *  Copyright (C) 2019 Eug Krashtan <eug.krashtan@gmail.com>
+ *  This file may be distributed under the terms of the GNU GPLv3 license.
+ *
+ */
+
+#include "board/gpio.h" // gpio_out_setup
+#include "stm32f0xx_hal.h"
+#include "internal.h" // GPIO
+#include "board/irq.h" // irq_save
+#include "compiler.h" // ARRAY_SIZE
+#include "sched.h" // sched_shutdown
+#include "command.h" // shutdown
+
+DECL_ENUMERATION_RANGE("pin", "PA0", GPIO('A', 0), 11);
+DECL_ENUMERATION_RANGE("pin", "PB0", GPIO('B', 0), 9);
+DECL_ENUMERATION_RANGE("pin", "PF0", GPIO('F', 0), 2);
+
+GPIO_TypeDef *const digital_regs[] = {
+    GPIOA, GPIOB, GPIOC, GPIOF
+};
+
+// <port:4><pin:4>
+uint8_t const avail_pins[] = {
+    0x0 + 0x0, //PA0
+    0x0 + 0x1, //PA1
+#if !(CONFIG_SERIAL)
+    0x0 + 0x2, //PA2 - USART pins
+    0x0 + 0x3, //PA3
+#endif
+    0x0 + 0x4, //PA4
+    0x0 + 0x5, //PA5
+    0x0 + 0x6, //PA6
+    0x0 + 0x7, //PA7
+#if !(CONFIG_CANSERIAL)
+    0x0 + 0x9, //PA9 - but remapped in CAN mode to PA11,PA12
+    0x0 + 0xa, //PA10
+#endif
+    0x10 + 0x1, //PB1
+    0x10 + 0x8, //PB8
+    0x50 + 0x0, //PF0
+    0x50 + 0x1, //PF1
+};
+
+/****************************************************************
+ * General Purpose Input Output (GPIO) pins
+ ****************************************************************/
+
+static uint8_t
+gpio_check_pin(uint8_t pin)
+{
+    int i;
+    for(i=0; i<ARRAY_SIZE(avail_pins); i++) {
+        if (avail_pins[i] == pin)
+            return i;
+    }
+    return 0xFF;
+}
+
+struct gpio_out
+gpio_out_setup(uint8_t pin, uint8_t val)
+{
+    struct gpio_out g = { .pin=pin };
+    if (gpio_check_pin(pin) < 0xFF) {
+        gpio_out_reset(g, val);
+    } else {
+        shutdown("Not an output pin");
+    }
+    return g;
+}
+
+void
+gpio_out_reset(struct gpio_out g, uint8_t val)
+{
+    GPIO_InitTypeDef GPIO_InitStruct = {0};
+    GPIO_InitStruct.Pin = 1 << (g.pin % 16);
+    GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
+    GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
+    HAL_GPIO_Init(digital_regs[GPIO2PORT(g.pin)], &GPIO_InitStruct);
+    HAL_GPIO_WritePin(digital_regs[GPIO2PORT(g.pin)], 1 << (g.pin % 16), val);
+}
+
+void
+gpio_out_write(struct gpio_out g, uint8_t val)
+{
+    HAL_GPIO_WritePin(digital_regs[GPIO2PORT(g.pin)], 1 << (g.pin % 16), val);
+}
+
+struct gpio_in
+gpio_in_setup(uint8_t pin, int8_t pull_up)
+{
+    struct gpio_in g = { .pin=pin };
+    if (gpio_check_pin(pin) < 0xFF) {
+        gpio_in_reset(g, pull_up);
+    } else {
+        shutdown("Not an input pin");
+    }
+    return g;
+}
+
+void
+gpio_in_reset(struct gpio_in g, int8_t pull_up)
+{
+    irqstatus_t flag = irq_save();
+    GPIO_InitTypeDef GPIO_InitStruct = {0};
+    GPIO_InitStruct.Pin = 1 << (g.pin % 16);
+    GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
+    GPIO_InitStruct.Pull = (pull_up)?GPIO_PULLUP:GPIO_NOPULL;
+    HAL_GPIO_Init(digital_regs[GPIO2PORT(g.pin)], &GPIO_InitStruct);
+    irq_restore(flag);
+}
+
+uint8_t
+gpio_in_read(struct gpio_in g)
+{
+    return HAL_GPIO_ReadPin(digital_regs[GPIO2PORT(g.pin)], 1 << (g.pin % 16));
+}
+
+void
+gpio_out_toggle_noirq(struct gpio_out g)
+{
+    HAL_GPIO_TogglePin(digital_regs[GPIO2PORT(g.pin)], 1 << (g.pin % 16));
+}
+
+void
+gpio_out_toggle(struct gpio_out g)
+{
+    irqstatus_t flag = irq_save();
+    gpio_out_toggle_noirq(g);
+    irq_restore(flag);
+}
+
+void gpio_init(void)
+{
+    /* GPIO Ports Clock Enable */
+    __HAL_RCC_GPIOA_CLK_ENABLE();
+    __HAL_RCC_GPIOB_CLK_ENABLE();
+    __HAL_RCC_GPIOF_CLK_ENABLE();
+}