h3n3/klipper
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

print_stats: add SET_PRINT_STATS_INFO G-Code for pass slicer variables to Klipper (#5726)

Browse Source 
This adds a gcode command that can be used insight the slicer to pass the total layer count and current layer information.

Signed-off-by: Stefan Dej <meteyou@gmail.com>
This commit is contained in:
Stefan Dej
2022-10-05 21:02:28 +02:00
committed by GitHub
parent a2482d4f95
commit b0ffb269d2
3 changed files with 46 additions and 3 deletions
Download Patch File Download Diff File Expand all files Collapse all files

12
docs/G-Codes.md
View File

@@ -888,6 +888,18 @@ the paused state is fresh for each print.
#### CANCEL_PRINT
`CANCEL_PRINT`: Cancels the current print.
### [print_stats]
The print_stats module is automatically loaded.
#### SET_PRINT_STATS_INFO
`SET_PRINT_STATS_INFO [TOTAL_LAYER=<total_layer_count>] [CURRENT_LAYER=
<current_layer>]`: Pass slicer info like layer act and total to Klipper.
Add `SET_PRINT_STATS_INFO [TOTAL_LAYER=<total_layer_count>]` to your
slicer start gcode section and `SET_PRINT_STATS_INFO [CURRENT_LAYER=
<current_layer>]` at the layer change gcode section to pass layer
information from your slicer to Klipper.
### [probe]
The following commands are available when a

8
docs/Status_Reference.md
View File

@@ -330,8 +330,12 @@ The following information is available in the `print_stats` object
[virtual_sdcard](Config_Reference.md#virtual_sdcard) config section is
defined):
- `filename`, `total_duration`, `print_duration`, `filament_used`,
`state`, `message`: Estimated information about the current print
when a virtual_sdcard print is active.
`state`, `message`: Estimated information about the current print when a
virtual_sdcard print is active.
- `info.total_layer`: The total layer value of the last `SET_PRINT_STATS_INFO
TOTAL_LAYER=<value>` G-Code command.
- `info.current_layer`: The current layer value of the last
`SET_PRINT_STATS_INFO CURRENT_LAYER=<value>` G-Code command.
## probe