h3n3/klipper
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

heaters: Make MINIMUM optional for TEMPERATURE_WAIT command (#3674)

Browse Source 
Signed-off-by: Justin Schuh <code@justinschuh.com>
This commit is contained in:
Justin Schuh
2020-12-24 08:34:26 -08:00
committed by GitHub
parent 1a9218532b
commit a5ebe5825a
2 changed files with 7 additions and 4 deletions
Download Patch File Download Diff File Expand all files Collapse all files

6
docs/G-Codes.md
View File

@@ -156,9 +156,9 @@ The following standard commands are supported:
/tmp/heattest.txt will be created with a log of all temperature
samples taken during the test.
- `TURN_OFF_HEATERS`: Turn off all heaters.
- `TEMPERATURE_WAIT SENSOR=<config_name> MINIMUM=<target> [MAXIMUM=<target>]`:
Wait until the given temperature sensor is at or above the given
minumum target, and (if specified) at or below the maximum target.
- `TEMPERATURE_WAIT SENSOR=<config_name> [MINIMUM=<target>] [MAXIMUM=<target>]`:
Wait until the given temperature sensor is at or above the supplied
MINIMUM and/or at or below the supplied MAXIMUM.
- `SET_VELOCITY_LIMIT [VELOCITY=<value>] [ACCEL=<value>]
[ACCEL_TO_DECEL=<value>] [SQUARE_CORNER_VELOCITY=<value>]`: Modify
the printer's velocity limits. Note that one may only set values