h3n3/klipper
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

docs: Avoid link descriptions that span multiple lines

Browse Source 
The Jekyll markdown renderer gets confused by links that span multiple
lines.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
This commit is contained in:
Kevin O'Connor
2021-05-28 20:58:32 -04:00
parent 624d94f6ac
commit 977c334e2e
10 changed files with 107 additions and 98 deletions
Download Patch File Download Diff File Expand all files Collapse all files

10
docs/Bootloaders.md
View File

@@ -313,8 +313,10 @@ section above, substituting the file name for the desired hid bootloader binary
It is not possible to use stm32flash for the SKR Mini E3 as the boot0 pin is
tied directly to ground and not broken out via header pins. It is recommended
to use a STLink V2 with STM32Cubeprogrammer to flash the bootloader. If you
don't have access to a STLink it is also possible to use a [Raspberry Pi and
OpenOCD](#running-openocd-on-the-raspberry-pi) with the following chip config:
don't have access to a STLink it is also possible to use a
[Raspberry Pi and OpenOCD](#running-openocd-on-the-raspberry-pi) with
the following chip config:
```
source [find target/stm32f1x.cfg]
```
@@ -398,8 +400,8 @@ board, a [build for the SKR Pro 1.1 is available here](
https://github.com/Arksine/STM32_HID_Bootloader/releases/tag/v0.5-beta).
Unless your board is DFU capable the most accessable flashing method
is likely via 3.3v serial, which follows the same procedure as [flashing the
STM32F103 using stm32flash](#stm32f103-micro-controllers-blue-pill-devices).
is likely via 3.3v serial, which follows the same procedure as
[flashing the STM32F103 using stm32flash](#stm32f103-micro-controllers-blue-pill-devices).
For example:
```
wget https://github.com/Arksine/STM32_HID_Bootloader/releases/download/v0.5-beta/hid_bootloader_SKR_PRO.bin