h3n3/klipper
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

config: Add periods to end of sentences in example configs

Browse Source 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
This commit is contained in:
Kevin O'Connor
2017-05-21 11:47:09 -04:00
parent c9b6662138
commit 944c121a00
3 changed files with 13 additions and 13 deletions
Download Patch File Download Diff File Expand all files Collapse all files

16
config/example.cfg
View File

@@ -18,7 +18,7 @@
# The stepper_x section is used to describe the stepper controlling
# the X axis in a cartesian robot
# the X axis in a cartesian robot.
[stepper_x]
step_pin: ar29
# Step GPIO pin (triggered high). This parameter must be provided.
@@ -77,7 +77,7 @@ position_max: 200
# The stepper_y section is used to describe the stepper controlling
# the Y axis in a cartesian robot. It has the same settings as the
# stepper_x section
# stepper_x section.
[stepper_y]
step_pin: ar27
dir_pin: ar26
@@ -90,7 +90,7 @@ position_max: 200
# The stepper_z section is used to describe the stepper controlling
# the Z axis in a cartesian robot. It has the same settings as the
# stepper_x section
# stepper_x section.
[stepper_z]
step_pin: ar23
dir_pin: !ar22
@@ -105,7 +105,7 @@ position_max: 200
# controlling the printer extruder and the heater parameters for the
# nozzle. The stepper configuration has the same settings as the
# stepper_x section and the heater configuration has the same settings
# as the heater_bed section
# as the heater_bed section (described below).
[extruder]
step_pin: ar19
dir_pin: ar18
@@ -151,7 +151,7 @@ filament_diameter: 3.500
# buildup. This setting only applies if pressure_advance is
# non-zero. The default is 0.010 (10 milliseconds).
#
# The remaining variables describe the extruder heater
# The remaining variables describe the extruder heater.
heater_pin: ar4
# PWM output pin controlling the heater. This parameter must be
# provided.
@@ -219,7 +219,7 @@ control: watermark
min_temp: 0
max_temp: 110
# Extruder print fan (omit section if fan not present)
# Extruder print fan (omit section if fan not present).
[fan]
pin: ar14
# PWM output pin controlling the fan. This parameter must be
@@ -234,7 +234,7 @@ pin: ar14
# Time (in seconds) to run the fan at full speed when first enabling
# it (helps get the fan spinning). The default is 0.100 seconds.
# Micro-controller information
# Micro-controller information.
[mcu]
serial: /dev/ttyACM0
# The serial port to connect to the MCU. The default is /dev/ttyS0
@@ -260,7 +260,7 @@ custom:
# LEDs, to configure micro-stepping pins, to configure a digipot,
# etc.
# The printer section controls high level printer settings
# The printer section controls high level printer settings.
[printer]
kinematics: cartesian
# This option must be "cartesian" for cartesian printers.