h3n3/klipper
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

fan_generic: Support setting a TEMPLATE on SET_FAN_SPEED commands

Browse Source 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
This commit is contained in:
Kevin O'Connor
2024-09-21 15:47:19 -04:00
parent f4143af4fa
commit 8f361a15b2
2 changed files with 33 additions and 3 deletions
Download Patch File Download Diff File Expand all files Collapse all files

14
docs/G-Codes.md
View File

@@ -476,6 +476,20 @@ enabled.
`SET_FAN_SPEED FAN=config_name SPEED=<speed>` This command sets the
speed of a fan. "speed" must be between 0.0 and 1.0.
`SET_FAN_SPEED PIN=config_name TEMPLATE=<template_name>
[<param_x>=<literal>]`: If `TEMPLATE` is specified then it assigns a
[display_template](Config_Reference.md#display_template) to the given
fan. For example, if one defined a `[display_template
my_fan_template]` config section then one could assign
`TEMPLATE=my_fan_template` here. The display_template should produce a
string containing a floating point number with the desired value. The
template will be continuously evaluated and the fan will be
automatically set to the resulting speed. One may set display_template
parameters to use during template evaluation (parameters will be
parsed as Python literals). If TEMPLATE is an empty string then this
command will clear any previous template assigned to the pin (one can
then use `SET_FAN_SPEED` commands to manage the values directly).
### [filament_switch_sensor]
The following command is available when a