h3n3/klipper
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

docs: Note the use of the virtual_sdcard feature

Browse Source 
Note that virtual_sdcard helps on slower machines.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
This commit is contained in:
Kevin O'Connor
2018-03-02 11:28:01 -05:00
parent b139a8561f
commit 82a65e9f4a
2 changed files with 21 additions and 6 deletions
Download Patch File Download Diff File Expand all files Collapse all files

11
docs/beaglebone.md
View File

@@ -54,7 +54,6 @@ sudo systemctl start octoprint
Make sure the octoprint web server is accessible - it should be at:
[http://beaglebone:5000/](http://beaglebone:5000/)
Building the micro-controller code
==================================
@@ -92,3 +91,13 @@ Remaining configuration
Complete the installation by configuring Klipper and Octoprint
following the instructions in
[the main installation document](Installation.md#configuring-klipper).
Printing on the Beaglebone
==========================
Unfortunately, the Beaglebone processor can sometimes struggle to run
OctoPrint well. Print stalls have been known to occur on complex
prints (the printer may move faster than OctoPrint can send movement
commands). If this occurs, consider using the "virtual_sdcard" feature
(see [config/example-extras.cfg](../config/example-extras.cfg) for
details) to print directly from Klipper.