config: Don't use arduino mega aliases in example config files

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>

config/printer-adimlab-2018.cfg

@@ -4,50 +4,50 @@
 # See docs/Config_Reference.md for a description of parameters.
 
 [stepper_x]
-step_pin: ar25
-dir_pin: !ar23
-enable_pin: !ar27
+step_pin: PA3
+dir_pin: !PA1
+enable_pin: !PA5
 microsteps: 16
 rotation_distance: 40
-endstop_pin: ^!ar22
+endstop_pin: ^!PA0
 position_min: -5
 position_endstop: -5
 position_max: 310
 homing_speed: 30.0
 
 [stepper_y]
-step_pin: ar32
-dir_pin: !ar33
-enable_pin: !ar31
+step_pin: PC5
+dir_pin: !PC4
+enable_pin: !PC6
 microsteps: 16
 rotation_distance: 40
-endstop_pin: ^!ar26
+endstop_pin: ^!PA4
 position_endstop: 0
 position_max: 310
 homing_speed: 30.0
 
 [stepper_z]
-step_pin: ar35
-dir_pin: ar36
-enable_pin: !ar34
+step_pin: PC2
+dir_pin: PC1
+enable_pin: !PC3
 microsteps: 16
 rotation_distance: 8
-endstop_pin: ^!ar29
+endstop_pin: ^!PA7
 position_endstop: 0.0
 position_max: 400
 homing_speed: 5.0
 
 [extruder]
-step_pin: ar42
-dir_pin: ar43
-enable_pin: !ar37
+step_pin: PL7
+dir_pin: PL6
+enable_pin: !PC0
 microsteps: 16
 rotation_distance: 34.557
 nozzle_diameter: 0.400
 filament_diameter: 1.750
-heater_pin: ar2
+heater_pin: PE4
 sensor_type: ATC Semitec 104GT-2
-sensor_pin: analog8
+sensor_pin: PK0
 control: pid
 pid_Kp: 15.717
 pid_Ki: 0.569
@@ -56,9 +56,9 @@ min_temp: 0
 max_temp: 245
 
 [heater_bed]
-heater_pin: ar4
+heater_pin: PG5
 sensor_type: EPCOS 100K B57560G104F
-sensor_pin: analog10
+sensor_pin: PK2
 control: pid
 pid_Kp: 74.883
 pid_Ki: 1.809
@@ -75,7 +75,6 @@ check_gain_time: 120
 
 [mcu]
 serial: /dev/ttyUSB0
-pin_map: arduino
 
 [printer]
 kinematics: cartesian
@@ -85,7 +84,7 @@ max_z_velocity: 10
 max_z_accel: 60
 
 [output_pin stepper_xy_current]
-pin: ar44
+pin: PL5
 pwm: True
 scale: 2.0
 cycle_time: .000030
@@ -93,7 +92,7 @@ hardware_pwm: True
 static_value: 1.3
 
 [output_pin stepper_z_current]
-pin: ar45
+pin: PL4
 pwm: True
 scale: 2.0
 cycle_time: .000030
@@ -101,7 +100,7 @@ hardware_pwm: True
 static_value: 1.3
 
 [output_pin stepper_e_current]
-pin: ar46
+pin: PL3
 pwm: True
 scale: 2.0
 cycle_time: .000030
@@ -110,15 +109,15 @@ static_value: 1.25
 
 [display]
 lcd_type: st7920
-cs_pin: ar20
-sclk_pin: ar14
-sid_pin: ar15
-encoder_pins: ^ar41, ^ar40
-click_pin: ^!ar19
+cs_pin: PD1
+sclk_pin: PJ1
+sid_pin: PJ0
+encoder_pins: ^PG0, ^PG1
+click_pin: ^!PD2
 
-# The filament runout sensor (on pin ar24) is not currently supported
+# The filament runout sensor (on pin PA2) is not currently supported
 # in Klipper.
 
 [output_pin case_light]
-pin: ar7
+pin: PH4
 value: 1