Deploying to gh-pages from @ Klipper3d/klipper@14a83103c3 🚀

zh/Resonance_Compensation.html

@@ -451,8 +451,8 @@
   
   
     <li class="md-nav__item">
-      <a href="OctoPrint.md" class="md-nav__link">
-        None
+      <a href="OctoPrint.html" class="md-nav__link">
+        OctoPrint for Klipper
       </a>
     </li>
   
@@ -1440,8 +1440,8 @@
   
   
     <li class="md-nav__item">
-      <a href="Eddy_Probe.md" class="md-nav__link">
-        None
+      <a href="Eddy_Probe.html" class="md-nav__link">
+        Eddy 感应涡流探针
       </a>
     </li>
   
@@ -1663,7 +1663,7 @@
 <p>首先，测量<strong>振纹频率</strong>。</p>
 <ol>
 <li>如果<code>square_corner_velocity</code>参数已更改，请将其恢复到5.0。当使用输入整形器时，不建议增加它，因为它会导致零件更加平滑——最好使用更高的加速度值。</li>
-<li>Disable the <code>miminum_cruise_ratio</code> feature by issuing the following command: <code>SET_VELOCITY_LIMIT MINIMUM_CRUISE_RATIO=0</code></li>
+<li>Disable the <code>minimum_cruise_ratio</code> feature by issuing the following command: <code>SET_VELOCITY_LIMIT MINIMUM_CRUISE_RATIO=0</code></li>
 <li>Disable Pressure Advance: <code>SET_PRESSURE_ADVANCE ADVANCE=0</code></li>
 <li>如果你已经将<code>[input_shaper]</code>分段添加到print.cfg中，执行<code>SET_INPUT_SHAPER SHAPER_FREQ_X=0 SHAPER_FREQ_Y=0</code>命令。如果你得到"未知命令"错误，此时你可以安全地忽略它，继续进行测量。</li>
 <li>Execute the command: <code>TUNING_TOWER COMMAND=SET_VELOCITY_LIMIT PARAMETER=ACCEL START=1500 STEP_DELTA=500 STEP_HEIGHT=5</code> Basically, we try to make ringing more pronounced by setting different large values for acceleration. This command will increase the acceleration every 5 mm starting from 1500 mm/sec^2: 1500 mm/sec^2, 2000 mm/sec^2, 2500 mm/sec^2 and so forth up until 7000 mm/sec^2 at the last band.</li>