h3n3/klipper
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Deploying to gh-pages from @ Klipper3d/klipper@9b60daf62d 🚀

Browse Source
This commit is contained in:
KevinOConnor
2022-12-22 02:24:09 +00:00
parent 8d550d64f4
commit 66c9c45730
12 changed files with 49 additions and 1 deletions
Download Patch File Download Diff File Expand all files Collapse all files

48
Config_Reference.html
View File

@@ -6320,6 +6320,30 @@ run_current:
# set, "stealthChop" mode will be enabled if the stepper motor
# velocity is below this value. The default is 0, which disables
# "stealthChop" mode.
#driver_MSLUT0: 2863314260
#driver_MSLUT1: 1251300522
#driver_MSLUT2: 608774441
#driver_MSLUT3: 269500962
#driver_MSLUT4: 4227858431
#driver_MSLUT5: 3048961917
#driver_MSLUT6: 1227445590
#driver_MSLUT7: 4211234
#driver_W0: 2
#driver_W1: 1
#driver_W2: 1
#driver_W3: 1
#driver_X1: 128
#driver_X2: 255
#driver_X3: 255
#driver_START_SIN: 0
#driver_START_SIN90: 247
# These fields control the Microstep Table registers directly. The optimal
# wave table is specific to each motor and might vary with current. An
# optimal configuration will have minimal print artifacts caused by
# non-linear stepper movement. The values specified above are the default
# values used by the driver. The value must be specified as a decimal integer
# (hex form is not supported). In order to compute the wave table fields,
# see the tmc2130 "Calculation Sheet" from the Trinamic website.
#driver_IHOLDDELAY: 8
#driver_TPOWERDOWN: 0
#driver_TBL: 1
@@ -6563,6 +6587,30 @@ run_current:
# set, "stealthChop" mode will be enabled if the stepper motor
# velocity is below this value. The default is 0, which disables
# "stealthChop" mode.
#driver_MSLUT0: 2863314260
#driver_MSLUT1: 1251300522
#driver_MSLUT2: 608774441
#driver_MSLUT3: 269500962
#driver_MSLUT4: 4227858431
#driver_MSLUT5: 3048961917
#driver_MSLUT6: 1227445590
#driver_MSLUT7: 4211234
#driver_W0: 2
#driver_W1: 1
#driver_W2: 1
#driver_W3: 1
#driver_X1: 128
#driver_X2: 255
#driver_X3: 255
#driver_START_SIN: 0
#driver_START_SIN90: 247
# These fields control the Microstep Table registers directly. The optimal
# wave table is specific to each motor and might vary with current. An
# optimal configuration will have minimal print artifacts caused by
# non-linear stepper movement. The values specified above are the default
# values used by the driver. The value must be specified as a decimal integer
# (hex form is not supported). In order to compute the wave table fields,
# see the tmc2130 "Calculation Sheet" from the Trinamic website.
#driver_IHOLDDELAY: 6
#driver_TPOWERDOWN: 10
#driver_TBL: 2