h3n3/klipper
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

stepper: Support stepper phase adjustments when homing

Browse Source 
Add support for enhancing the precision of endstop switches by also
inspecting the phase of the stepper motor when the endstop triggers.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
This commit is contained in:
Kevin O'Connor
2016-07-26 22:06:14 -04:00
parent 170389ef14
commit 654546e338
6 changed files with 81 additions and 2 deletions
Download Patch File Download Diff File Expand all files Collapse all files

22
config/example.cfg
View File

@@ -11,7 +11,7 @@
# available pin and board names.)
# Pin names may be preceded by an '!' to indicate that a reverse
# polarity should be used (eg, trigger on low instead of high). Input
# pins may be prceded by an '^' to indicate that a hardware pull-up
# pins may be preceded by a '^' to indicate that a hardware pull-up
# resistor should be enabled for the pin.
@@ -38,6 +38,26 @@ homing_retract_dist: 5.0
# Distance to backoff (in mm) before homing a second time during homing
homing_positive_dir: False
# If true, homes in a positive direction (away from zero)
homing_stepper_phases: 0
# One may optionally set this to the number of phases of the stepper
# motor driver (which is the number of micro-steps multiplied by
# four). When set, the phase of the stepper driver will be used
# during homing to improve the accuracy of the endstop switch.
homing_endstop_accuracy: 0.200
# Sets the expected accuracy (in mm) of the endstop. This represents
# the maximum error distance the endstop may trigger (eg, if an
# endstop may occasionally trigger 100um early or up to 100um late
# then set this to 0.200 for 200um). This setting is used with
# homing_stepper_phases and is only useful if that parameter is also
# configured.
#homing_endstop_phase: 0
# This specifies the phase of the stepper motor driver to expect
# when hitting the endstop. This setting is only meaningful if
# homing_stepper_phases is also set. Only set this value if one is
# sure the stepper motor driver is reset every time the mcu is
# reset. If this is not set, but homing_stepper_phases is set, then
# the stepper phase will be detected on the first home and that
# phase will be used on all subsequent homes.
position_min: -0.25
# Minimum valid distance (in mm) the user may command the stepper to
# move to (not currently enforced)

6
config/makergear-m2-2012.cfg
View File

@@ -12,6 +12,8 @@ max_velocity: 500
max_accel: 3000
endstop_pin: ^PB6
homing_speed: 50.0
homing_stepper_phases: 32
homing_endstop_accuracy: .200
position_min: -0.25
position_endstop: 0.0
position_max: 200
@@ -25,6 +27,8 @@ max_velocity: 500
max_accel: 3000
endstop_pin: ^PB5
homing_speed: 50.0
homing_stepper_phases: 32
homing_endstop_accuracy: .200
position_min: -0.25
position_endstop: 0.0
position_max: 250
@@ -39,6 +43,8 @@ max_accel: 30
endstop_pin: ^PB4
homing_speed: 4.0
homing_retract_dist: 2.0
homing_stepper_phases: 32
homing_endstop_accuracy: .050
position_min: 0.1
position_endstop: 0.7
position_max: 200