extruder: Add nozzle and filament diameter config settings

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-01-02 18:21:39 -05:00
parent 38ca051381
commit 5a5bd2596a
5 changed files with 15 additions and 1 deletions
--- a/config/avrsim.cfg
+++ b/config/avrsim.cfg
@@ -42,6 +42,8 @@ step_pin: ar19
 dir_pin: ar18
 enable_pin: ar25
 step_distance: .004242
+nozzle_diameter: 0.500
+filament_diameter: 3.500
 max_velocity: 200000
 max_accel: 3000
 heater_pin: ar4
--- a/config/example-delta.cfg
+++ b/config/example-delta.cfg
@@ -46,6 +46,8 @@ step_pin: ar26
 dir_pin: ar28
 enable_pin: !ar24
 step_distance: .0022
+nozzle_diameter: 0.400
+filament_diameter: 1.750
 max_velocity: 200
 max_accel: 3000
 heater_pin: ar10
--- a/config/example.cfg
+++ b/config/example.cfg
@@ -109,6 +109,12 @@ step_pin: ar19
 dir_pin: ar18
 enable_pin: !ar25
 step_distance: .004242
+nozzle_diameter: 0.500
+#   Diameter of the nozzle orifice (in mm). This parameter must be
+#   provided.
+filament_diameter: 3.500
+#   Diameter of the raw filament (in mm) as it enters the
+#   extruder. This parameter must be provided.
 max_velocity: 200000
 #   Maximum velocity (in mm/s) of the extruder motor for extrude only
 #   moves. This parameter must be provided.
--- a/config/makergear-m2-2012.cfg
+++ b/config/makergear-m2-2012.cfg
@@ -48,6 +48,8 @@ step_pin: PC3
 dir_pin: PL6
 enable_pin: !PA4
 step_distance: .004242
+nozzle_diameter: 0.350
+filament_diameter: 1.750
 max_velocity: 200000
 max_accel: 3000
 pressure_advance: 0.07