h3n3/klipper
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

docs: Update for latest changs to skew_correction

Browse Source 
Signed-off-by:  Eric Callahan <arksine.code@gmail.com>
This commit is contained in:
Arksine
2019-06-28 15:40:00 -04:00
committed by KevinOConnor
parent 0c379d060f
commit 57eb0e8975
4 changed files with 87 additions and 40 deletions
Download Patch File Download Diff File Expand all files Collapse all files

23
config/example-extras.cfg
View File

@@ -377,28 +377,15 @@
# if retries are enabled then retry if largest and smallest probed points
# differ more than retry_tolerance
# Printer Skew Correction. It is possible to use software to correct
# printer skew across 3 planes, xy, xz, yz. This is done by printing
# a calibration model along a plane and measuring three lengths. See
# skew_correction.md in the docs directory for more details.
# a calibration model along a plane and measuring three lengths. Due
# to the nature of skew correction these lengths are set via gcode. See
# skew_correction.md and G-Codes.md in the docs directory for details.
#
#[skew_correction]
#xy_ac_length:
#xy_bd_length:
#xy_ad_length:
# The measured lengths (in mm) on the xy plane skew calibration print.
# If one length is provided all three lengths must be provided. The default
# is no measurement, which results in no skew correction along the xy plane.
#xz_ac_length:
#xz_bd_length:
#xz_ad_length:
# The same as above, on the xz plane. The default is no skew correction
# on the xz plane.
#yz_ac_length:
#yz_bd_length:
#yz_ad_length:
# The same as above on the yz plane. The default is no skew correction
# on the yz plane.
# In a multi-extruder printer add an additional extruder section for
# each additional extruder. The additional extruder sections should be