h3n3/klipper
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

configfile: Add support for rewriting the printer config file

Browse Source 
Add support for writing back the main printer config file with
additional calibration data stored in it.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
This commit is contained in:
Kevin O'Connor
2018-09-16 11:37:00 -04:00
committed by KevinOConnor
parent f80456a698
commit 531134f092
2 changed files with 152 additions and 17 deletions
Download Patch File Download Diff File Expand all files Collapse all files

4
docs/G-Codes.md
View File

@@ -115,6 +115,10 @@ The following standard commands are supported:
[the FAQ](FAQ.md#how-do-i-upgrade-to-the-latest-software)).
- `FIRMWARE_RESTART`: This is similar to a RESTART command, but it
also clears any error state from the micro-controller.
- `SAVE_CONFIG`: This command will overwrite the main printer config
file and restart the host software. This command is used in
conjunction with other calibration commands to store the results of
calibration tests.
- `STATUS`: Report the Klipper host software status.
- `HELP`: Report the list of available extended G-Code commands.