h3n3/klipper
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Deploying to gh-pages from @ Klipper3d/klipper@d9daeb0803 🚀

Browse Source
This commit is contained in:
KevinOConnor
2022-04-29 00:04:01 +00:00
parent 6ae53d06a1
commit 4e91ef87f4
27 changed files with 787 additions and 318 deletions
Download Patch File Download Diff File Expand all files Collapse all files

62
zh-Hant/G-Codes.html
View File

@@ -1966,6 +1966,33 @@
</ul>
</nav>
</li>
<li class="md-nav__item">
<a href="#smart_effector" class="md-nav__link">
[smart_effector]
</a>
<nav class="md-nav" aria-label="[smart_effector]">
<ul class="md-nav__list">
<li class="md-nav__item">
<a href="#set_smart_effector" class="md-nav__link">
SET_SMART_EFFECTOR
</a>
</li>
<li class="md-nav__item">
<a href="#reset_smart_effector" class="md-nav__link">
RESET_SMART_EFFECTOR
</a>
</li>
</ul>
</nav>
</li>
<li class="md-nav__item">
@@ -3872,6 +3899,33 @@
</ul>
</nav>
</li>
<li class="md-nav__item">
<a href="#smart_effector" class="md-nav__link">
[smart_effector]
</a>
<nav class="md-nav" aria-label="[smart_effector]">
<ul class="md-nav__list">
<li class="md-nav__item">
<a href="#set_smart_effector" class="md-nav__link">
SET_SMART_EFFECTOR
</a>
</li>
<li class="md-nav__item">
<a href="#reset_smart_effector" class="md-nav__link">
RESET_SMART_EFFECTOR
</a>
</li>
</ul>
</nav>
</li>
<li class="md-nav__item">
@@ -4359,7 +4413,7 @@
<h4 id="z_offset_apply_probe">Z_OFFSET_APPLY_PROBE<a class="headerlink" href="#z_offset_apply_probe" title="Permanent link">&para;</a></h4>
<p><code>Z_OFFSET_APPLY_PROBE</code>：將目前的Z 的 G 程式碼偏移量（就是 babystepping）從 probe 的 z_offset 中減去。該命令將持久化一個常用babystepping 微調值。需要執行 <code>SAVE_CONFIG</code>才能生效。</p>
<h3 id="query_adc">[query_adc]<a class="headerlink" href="#query_adc" title="Permanent link">&para;</a></h3>
<p>模組query_endstops已自動載入.</p>
<p>The query_adc module is automatically loaded.</p>
<h4 id="query_adc_1">QUERY_ADC<a class="headerlink" href="#query_adc_1" title="Permanent link">&para;</a></h4>
<p><code>QUERY_ADC [NAME=&lt;config_name&gt;] [PULLUP=&lt;value&gt;]</code> ：返回為配置的模擬引腳收到的最後一個模擬值。如果NAME沒有被提供，將報告可用的adc名稱列表。如果提供了PULLUP（以歐姆為單位的數值），將會返回原始模擬值和給定的等效電阻。</p>
<h3 id="query_endstops">[query_endstops]<a class="headerlink" href="#query_endstops" title="Permanent link">&para;</a></h3>
@@ -4421,6 +4475,12 @@
<p><code>CALC_MEASURED_SKEW [AC=&lt;ac 長度&gt;] [BD=&lt;bd 長度&gt;] [AD=&lt;ad 長度&gt;]</code>：計算並報告基於一個列印件測量的偏斜度（以弧度和角度為單位）。它可以用來驗證應用校正後印表機的當前偏斜度。它也可以用來確定是否有必要進行偏斜矯正。有關偏斜矯正列印模型和測量方法詳見<a href="Skew_Correction.html">偏斜校正文件</a>。</p>
<h4 id="skew_profile">SKEW_PROFILE<a class="headerlink" href="#skew_profile" title="Permanent link">&para;</a></h4>
<p><code>SKEW_PROFILE [LOAD=&lt;名稱&gt;] [SAVE=&lt;名稱&gt;] [REMOVE=&lt;名稱&gt;]</code>：skew_correction 配置管理命令。 LOAD 將從與提供的名稱匹配的配置中載入偏斜狀態。 SAVE 會將目前偏斜狀態儲存到與提供的名稱匹配的配置中。 REMOVE 將從持久記憶體中刪除與提供的名稱匹配的配置。請注意，在執行 SAVE 或 REMOVE 操作后，必須執行 SAVE_CONFIG G程式碼才能儲存更改。</p>
<h3 id="smart_effector">[smart_effector]<a class="headerlink" href="#smart_effector" title="Permanent link">&para;</a></h3>
<p>Several commands are available when a <a href="Config_Reference.html#smart_effector">smart_effector config section</a> is enabled. Be sure to check the official documentation for the Smart Effector on the <a href="https://duet3d.dozuki.com/Wiki/Smart_effector_and_carriage_adapters_for_delta_printer">Duet3D Wiki</a> before changing the Smart Effector parameters. Also check the <a href="Probe_Calibrate.html">probe calibration guide</a>.</p>
<h4 id="set_smart_effector">SET_SMART_EFFECTOR<a class="headerlink" href="#set_smart_effector" title="Permanent link">&para;</a></h4>
<p><code>SET_SMART_EFFECTOR [SENSITIVITY=&lt;sensitivity&gt;] [ACCEL=&lt;accel&gt;] [RECOVERY_TIME=&lt;time&gt;]</code>: Set the Smart Effector parameters. When <code>SENSITIVITY</code> is specified, the respective value is written to the SmartEffector EEPROM (requires <code>control_pin</code> to be provided). Acceptable <code>&lt;sensitivity&gt;</code> values are 0..255, the default is 50. Lower values require less nozzle contact force to trigger (but there is a higher risk of false triggering due to vibrations during probing), and higher values reduce false triggering (but require larger contact force to trigger). Since the sensitivity is written to EEPROM, it is preserved after the shutdown, and so it does not need to be configured on every printer startup. <code>ACCEL</code> and <code>RECOVERY_TIME</code> allow to override the corresponding parameters at run-time, see the <a href="Config_Reference.html#smart_effector">config section</a> of Smart Effector for more info on those parameters.</p>
<h4 id="reset_smart_effector">RESET_SMART_EFFECTOR<a class="headerlink" href="#reset_smart_effector" title="Permanent link">&para;</a></h4>
<p><code>RESET_SMART_EFFECTOR</code>: Resets Smart Effector sensitivity to its factory settings. Requires <code>control_pin</code> to be provided in the config section.</p>
<h3 id="stepper_enable">[stepper_enable]<a class="headerlink" href="#stepper_enable" title="Permanent link">&para;</a></h3>
<p>模組stepper_enable已自動載入.</p>
<h4 id="set_stepper_enable">SET_STEPPER_ENABLE<a class="headerlink" href="#set_stepper_enable" title="Permanent link">&para;</a></h4>