h3n3/klipper
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

dotstar: Initial support for "dotstar" LEDs

Browse Source 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
This commit is contained in:
Kevin O'Connor
2019-08-06 19:30:48 -04:00
parent c2a08962b7
commit 4c09d8bf02
5 changed files with 98 additions and 18 deletions
Download Patch File Download Diff File Expand all files Collapse all files

23
config/example-extras.cfg
View File

@@ -1654,9 +1654,9 @@
# Neopixel (aka WS2812) LED support (one may define any number of
# sections with a "neopixel" prefix). One may set the LED color via a
# "SET_NEOPIXEL NEOPIXEL=my_neopixel RED=0.1 GREEN=0.1 BLUE=0.1" type
# extended g-code commands.
# sections with a "neopixel" prefix). One may set the LED color via
# "SET_LED LED=my_neopixel RED=0.1 GREEN=0.1 BLUE=0.1" type extended
# g-code commands.
#[neopixel my_neopixel]
#pin:
# The pin connected to the neopixel. This parameter must be
@@ -1671,6 +1671,23 @@
# Sets the initial LED color of the Neopixel. Each value should be
# between 0.0 and 1.0. The default for each color is 0.
# Dotstar (aka APA102) LED support (one may define any number of
# sections with a "dotstar" prefix). One may set the LED color via
# "SET_LED LED=my_dotstar RED=0.1 GREEN=0.1 BLUE=0.1" type extended
# g-code commands.
#[dotstar my_dotstar]
#data_pin:
# The pin connected to the data line of the dotstar. This parameter
# must be provided.
#clock_pin:
# The pin connected to the clock line of the dotstar. This parameter
# must be provided.
#chain_count:
#initial_RED: 0.0
#initial_GREEN: 0.0
#initial_BLUE: 0.0
# See the "neopixel" section for information on these parameters.
# Firmware filament retraction. This enables G10 (retract) and G11
# (unretract) GCODE commands issued by many slicers. The parameters