h3n3/klipper
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Deploying to gh-pages from @ Klipper3d/klipper@e0cbd7b5fc 🚀

Browse Source
This commit is contained in:
KevinOConnor
2024-05-14 22:24:00 +00:00
parent a25399914b
commit 477948035a
14 changed files with 5 additions and 5 deletions
Download Patch File Download Diff File Expand all files Collapse all files

8
Config_Reference.html
View File

@@ -6730,7 +6730,7 @@ run_current:
# "stealthChop" mode.
#coolstep_threshold:
# The velocity (in mm/s) to set the TMC driver internal "CoolStep"
# threshold to. When set, the coolstep feature will be enabled if
# threshold to. If set, the coolstep feature will be enabled when
# the stepper motor velocity is near or above this value. Important
# - if coolstep_threshold is set and "sensorless homing" is used,
# then one must ensure that the homing speed is above the coolstep
@@ -6878,7 +6878,7 @@ run_current:
# See the "tmc2208" section for the definition of these parameters.
#coolstep_threshold:
# The velocity (in mm/s) to set the TMC driver internal "CoolStep"
# threshold to. When set, the coolstep feature will be enabled if
# threshold to. If set, the coolstep feature will be enabled when
# the stepper motor velocity is near or above this value. Important
# - if coolstep_threshold is set and "sensorless homing" is used,
# then one must ensure that the homing speed is above the coolstep
@@ -7037,7 +7037,7 @@ run_current:
# "stealthChop" mode.
#coolstep_threshold:
# The velocity (in mm/s) to set the TMC driver internal "CoolStep"
# threshold to. When set, the coolstep feature will be enabled if
# threshold to. If set, the coolstep feature will be enabled when
# the stepper motor velocity is near or above this value. Important
# - if coolstep_threshold is set and "sensorless homing" is used,
# then one must ensure that the homing speed is above the coolstep
@@ -7170,7 +7170,7 @@ run_current:
# "stealthChop" mode.
#coolstep_threshold:
# The velocity (in mm/s) to set the TMC driver internal "CoolStep"
# threshold to. When set, the coolstep feature will be enabled if
# threshold to. If set, the coolstep feature will be enabled when
# the stepper motor velocity is near or above this value. Important
# - if coolstep_threshold is set and "sensorless homing" is used,
# then one must ensure that the homing speed is above the coolstep