Deploying to gh-pages from @ Klipper3d/klipper@97a5b39aab 🚀

2022-09-12 00:06:54 +00:00
parent dd3feade64
commit 4718c38faa
35 changed files with 1193 additions and 587 deletions
--- a/zh-Hant/Config_Reference.html
+++ b/zh-Hant/Config_Reference.html
@@ -548,6 +548,13 @@
    線性三角洲機型
  </a>
  
+</li>
+        
+          <li class="md-nav__item">
+  <a href="#deltesian-kinematics" class="md-nav__link">
+    Deltesian Kinematics
+  </a>
+  
 </li>
        
          <li class="md-nav__item">
@@ -2455,6 +2462,13 @@
    線性三角洲機型
  </a>
  
+</li>
+        
+          <li class="md-nav__item">
+  <a href="#deltesian-kinematics" class="md-nav__link">
+    Deltesian Kinematics
+  </a>
+  
 </li>
        
          <li class="md-nav__item">
@@ -3587,8 +3601,7 @@ serial:
 kinematics:
 #   The type of printer in use. This option may be one of: cartesian,
 #   corexy, corexz, hybrid_corexy, hybrid_corexz, rotary_delta, delta,
-#   polar, winch, or none. This
-#   parameter must be specified.
+#   deltesian, polar, winch, or none. This parameter must be specified.
 max_velocity:
 #   Maximum velocity (in mm/s) of the toolhead (relative to the
 #   print). This parameter must be specified.
@@ -3794,6 +3807,74 @@ radius:
 #   just prior to starting a probe operation. The default is 5.
 </code></pre></div>

+<h3 id="deltesian-kinematics">Deltesian Kinematics<a class="headerlink" href="#deltesian-kinematics" title="Permanent link">&para;</a></h3>
+<p>See <a href="https://github.com/Klipper3d/klipper/blob/master/config/example-deltesian.cfg">example-deltesian.cfg</a> for an example deltesian kinematics config file.</p>
+<p>Only parameters specific to deltesian printers are described here - see <a href="#common-kinematic-settings">common kinematic settings</a> for available parameters.</p>
+<div class="highlight"><pre><span></span><code>[printer]
+kinematics: deltesian
+max_z_velocity:
+#   For deltesian printers, this limits the maximum velocity (in mm/s) of
+#   moves with z axis movement. This setting can be used to reduce the
+#   maximum speed of up/down moves (which require a higher step rate
+#   than other moves on a deltesian printer). The default is to use
+#   max_velocity for max_z_velocity.
+#max_z_accel:
+#   This sets the maximum acceleration (in mm/s^2) of movement along
+#   the z axis. Setting this may be useful if the printer can reach higher
+#   acceleration on XY moves than Z moves (eg, when using input shaper).
+#   The default is to use max_accel for max_z_accel.
+#minimum_z_position: 0
+#   The minimum Z position that the user may command the head to move
+#   to. The default is 0.
+#min_angle: 5
+#   This represents the minimum angle (in degrees) relative to horizontal
+#   that the deltesian arms are allowed to achieve. This parameter is
+#   intended to restrict the arms from becomming completely horizontal,
+#   which would risk accidental inversion of the XZ axis. The default is 5.
+#print_width:
+#   The distance (in mm) of valid toolhead X coordinates. One may use
+#   this setting to customize the range checking of toolhead moves. If
+#   a large value is specified here then it may be possible to command
+#   the toolhead into a collision with a tower. This setting usually
+#   corresponds to bed width (in mm).
+#slow_ratio: 3
+#   The ratio used to limit velocity and acceleration on moves near the
+#   extremes of the X axis. If vertical distance divided by horizontal
+#   distance exceeds the value of slow_ratio, then velocity and
+#   acceleration are limited to half their nominal values. If vertical
+#   distance divided by horizontal distance exceeds twice the value of
+#   the slow_ratio, then velocity and acceleration are limited to one
+#   quarter of their nominal values. The default is 3.
+
+# The stepper_left section is used to describe the stepper controlling
+# the left tower. This section also controls the homing parameters
+# (homing_speed, homing_retract_dist) for all towers.
+[stepper_left]
+position_endstop:
+#   Distance (in mm) between the nozzle and the bed when the nozzle is
+#   in the center of the build area and the endstops are triggered. This
+#   parameter must be provided for stepper_left; for stepper_right this
+#   parameter defaults to the value specified for stepper_left.
+arm_length:
+#   Length (in mm) of the diagonal rod that connects the tower carriage to
+#   the print head. This parameter must be provided for stepper_left; for
+#   stepper_right, this parameter defaults to the value specified for
+#   stepper_left.
+arm_x_length:
+#   Horizontal distance between the print head and the tower when the
+#   printers is homed. This parameter must be provided for stepper_left;
+#   for stepper_right, this parameter defaults to the value specified for
+#   stepper_left.
+
+# The stepper_right section is used to desribe the stepper controlling the
+# right tower.
+[stepper_right]
+
+# The stepper_y section is used to describe the stepper controlling
+# the Y axis in a deltesian robot.
+[stepper_y]
+</code></pre></div>
+
 <h3 id="corexy">CoreXY 機型<a class="headerlink" href="#corexy" title="Permanent link">&para;</a></h3>
 <p>有關 corexy（及 H-BOT）機型文件的示例，請參見 <a href="https://github.com/Klipper3d/klipper/blob/master/config/example-corexy.cfg">example-corexy.cfg</a>。</p>
 <p>這裡只描述了 CoreXY 印表機特有的參數 -- 有關可用參數，請參閱 <a href="#common-kinematic-settings">常見機型設定</a>。</p>
@@ -5405,19 +5486,21 @@ serial_no:
 <p>列印冷卻風扇。</p>
 <div class="highlight"><pre><span></span><code>[fan]
 pin:
-#   控制風扇的輸出引腳。
-#   必須提供此參數。
+#   Output pin controlling the fan. This parameter must be provided.
 #max_power: 1.0
-#   引腳允許被設定的最大占空比（在0.0和1.0之間）。
-#   1.0 允許引腳被長時間完全啟用，而0.5會只允許引腳只在一半的時間裡
-#   被啟用。這個設定可以限制風扇的最大功率（平均功率）。如果這個值
-#   小於 1.0 則風速請求會被縮放到 0 和 max_power 之間（例如，如果
-#   max_power 是 0.9，請求 80% 風速速度會使風扇功率設為72%）。
-#   預設為1.0。
+#   The maximum power (expressed as a value from 0.0 to 1.0) that the
+#   pin may be set to. The value 1.0 allows the pin to be set fully
+#   enabled for extended periods, while a value of 0.5 would allow the
+#   pin to be enabled for no more than half the time. This setting may
+#   be used to limit the total power output (over extended periods) to
+#   the fan. If this value is less than 1.0 then fan speed requests
+#   will be scaled between zero and max_power (for example, if
+#   max_power is .9 and a fan speed of 80% is requested then the fan
+#   power will be set to 72%). The default is 1.0.
 #shutdown_speed: 0
-#   在微控制器進入錯誤狀態時期望的（一個在0.0和1.0之間的值）
-#   風扇速度。
-#   預設為 0。
+#   The desired fan speed (expressed as a value from 0.0 to 1.0) if
+#   the micro-controller software enters an error state. The default
+#   is 0.
 #cycle_time: 0.010
 #   The amount of time (in seconds) for each PWM power cycle to the
 #   fan. It is recommended this be 10 milliseconds or greater when
@@ -5459,6 +5542,12 @@ pin:
 #   enough for fans below 10000 RPM at 2 PPR. This must be smaller than
 #   30/(tachometer_ppr*rpm), with some margin, where rpm is the
 #   maximum speed (in RPM) of the fan.
+#enable_pin:
+#   Optional pin to enable power to the fan. This can be useful for fans
+#   with dedicated PWM inputs. Some of these fans stay on even at 0% PWM
+#   input. In such a case, the PWM pin can be used normally, and e.g. a
+#   ground-switched FET(standard fan pin) can be used to control power to
+#   the fan.
 </code></pre></div>

 <h3 id="heater_fan">[heater_fan]<a class="headerlink" href="#heater_fan" title="Permanent link">&para;</a></h3>
@@ -5474,18 +5563,20 @@ pin:
 #tachometer_pin:
 #tachometer_ppr:
 #tachometer_poll_interval:
-#   以上參數詳見「fan」章節。
+#enable_pin:
+#   See the &quot;fan&quot; section for a description of the above parameters.
 #heater: extruder
-#   該風扇關聯的加熱器配置分段名稱。如果提供了一個逗號分隔的
-#   加熱器列表，則風扇將會在任一加熱器被啟用時啟動。
-#   預設為&quot;extruder&quot;。
+#   Name of the config section defining the heater that this fan is
+#   associated with. If a comma separated list of heater names is
+#   provided here, then the fan will be enabled when any of the given
+#   heaters are enabled. The default is &quot;extruder&quot;.
 #heater_temp: 50.0
-#   風扇可以被禁用的最高加熱器溫度（以攝氏度為單位）。加熱器
-#   必須被降低到該溫度以下風扇才會被禁用。
-#   預設為 50 攝氏度。
+#   A temperature (in Celsius) that the heater must drop below before
+#   the fan is disabled. The default is 50 Celsius.
 #fan_speed: 1.0
-#   當相關聯的加熱器活躍時該風扇的速度（在0.0和1.0之間）。
-#   預設為 1.0
+#   The fan speed (expressed as a value from 0.0 to 1.0) that the fan
+#   will be set to when its associated heater is enabled. The default
+#   is 1.0
 </code></pre></div>

 <h3 id="controller_fan">[controller_fan]<a class="headerlink" href="#controller_fan" title="Permanent link">&para;</a></h3>
@@ -5501,25 +5592,27 @@ pin:
 #tachometer_pin:
 #tachometer_ppr:
 #tachometer_poll_interval:
-#  以上參數請見「風扇」(fan)分段。
+#enable_pin:
+#   See the &quot;fan&quot; section for a description of the above parameters.
 #fan_speed: 1.0
-#   當一個加熱器或步進電機活躍時的風扇速度（以一個0.0到1.0
-#   的數值表示）。
-#   預設為 1.0。
+#   The fan speed (expressed as a value from 0.0 to 1.0) that the fan
+#   will be set to when a heater or stepper driver is active.
+#   The default is 1.0
 #idle_timeout:
-#   在步進電機或加熱器不再活躍后風扇持續執行的時間（以秒
-#   為單位）。
-#   預設為 30秒。
+#   The amount of time (in seconds) after a stepper driver or heater
+#   was active and the fan should be kept running. The default
+#   is 30 seconds.
 #idle_speed:
-#   當一個加熱器或步進電機不再活躍，但沒有達到空閑超時(
-#   idle_timeout)時的風扇速度（以一個0.0到1.0的數值表示）。
-#   預設為 fan_speed。
+#   The fan speed (expressed as a value from 0.0 to 1.0) that the fan
+#   will be set to when a heater or stepper driver was active and
+#   before the idle_timeout is reached. The default is fan_speed.
 #heater:
 #stepper:
-#   與這個風扇關聯的加熱器/步進驅動配置分段名稱。如果提
-#   供一個逗號分隔的加熱器/步進驅動名稱，任意一個列表中
-#   的裝置啟用時風扇將會啟動。
-#   預設加熱器是「擠出機」（extruder)，預設步進驅動是全部步進驅動。
+#   Name of the config section defining the heater/stepper that this fan
+#   is associated with. If a comma separated list of heater/stepper names
+#   is provided here, then the fan will be enabled when any of the given
+#   heaters/steppers are enabled. The default heater is &quot;extruder&quot;, the
+#   default stepper is all of them.
 </code></pre></div>

 <h3 id="temperature_fan">[temperature_fan]<a class="headerlink" href="#temperature_fan" title="Permanent link">&para;</a></h3>
@@ -5536,6 +5629,7 @@ pin:
 #tachometer_pin:
 #tachometer_ppr:
 #tachometer_poll_interval:
+#enable_pin:
 #   See the &quot;fan&quot; section for a description of the above parameters.
 #sensor_type:
 #sensor_pin:
@@ -5588,7 +5682,8 @@ pin:
 #tachometer_pin:
 #tachometer_ppr:
 #tachometer_poll_interval:
-#   以上參數介紹請見「fan」（風扇）章節。
+#enable_pin:
+#   See the &quot;fan&quot; section for a description of the above parameters.
 </code></pre></div>

 <h2 id="leds">LEDs<a class="headerlink" href="#leds" title="Permanent link">&para;</a></h2>
--- a/zh-Hant/G-Codes.html
+++ b/zh-Hant/G-Codes.html
@@ -1580,6 +1580,26 @@
      </ul>
    </nav>
  
+</li>
+        
+          <li class="md-nav__item">
+  <a href="#mcp4018" class="md-nav__link">
+    [mcp4018]
+  </a>
+  
+    <nav class="md-nav" aria-label="[mcp4018]">
+      <ul class="md-nav__list">
+        
+          <li class="md-nav__item">
+  <a href="#set_digipot" class="md-nav__link">
+    SET_DIGIPOT
+  </a>
+  
+</li>
+        
+      </ul>
+    </nav>
+  
 </li>
        
          <li class="md-nav__item">
@@ -3583,6 +3603,26 @@
      </ul>
    </nav>
  
+</li>
+        
+          <li class="md-nav__item">
+  <a href="#mcp4018" class="md-nav__link">
+    [mcp4018]
+  </a>
+  
+    <nav class="md-nav" aria-label="[mcp4018]">
+      <ul class="md-nav__list">
+        
+          <li class="md-nav__item">
+  <a href="#set_digipot" class="md-nav__link">
+    SET_DIGIPOT
+  </a>
+  
+</li>
+        
+      </ul>
+    </nav>
+  
 </li>
        
          <li class="md-nav__item">
@@ -4501,6 +4541,10 @@
 <p>當<a href="Config_Reference.html#manual_stepper">manual_stepper 配置分段</a>被啟用時，以下命令可用。</p>
 <h4 id="manual_stepper_1">MANUAL_STEPPER<a class="headerlink" href="#manual_stepper_1" title="Permanent link">&para;</a></h4>
 <p><code>MANUAL_STEPPER STEPPER=config_name [ENABLE=[0|1]] [SET_POSITION=&lt;pos&gt;] [SPEED=&lt;speed&gt;] [ACCEL=&lt;accel&gt;] [MOVE=&lt;pos&gt; [STOP_ON_ENDSTOP=[1|2|-1|-2]] [SYNC=0]]</code>：該命令將改變步進器的狀態。使用ENABLE參數來啟用/禁用步進。使用SET_POSITION參數，迫使步進認為它處於給定的位置。使用MOVE參數，要求移動到給定位置。如果指定了SPEED或者ACCEL，那麼將使用給定的值而不是配置檔案中指定的預設值。如果指定ACCEL為0，那麼將不執行加速。如果STOP_ON_ENDSTOP=1被指定，那麼如果止動器報告被觸發，動作將提前結束（使用STOP_ON_ENDSTOP=2來完成動作，即使止動器沒有被觸發也不會出錯，使用-1或-2來在止動器報告沒有被觸發時停止）。通常情況下，未來的G-Code命令將被安排在步進運動完成後執行，但是如果手動步進運動使用SYNC=0，那麼未來的G-Code運動命令可能與步進運動平行執行。</p>
+<h3 id="mcp4018">[mcp4018]<a class="headerlink" href="#mcp4018" title="Permanent link">&para;</a></h3>
+<p>The following command is available when a <a href="Config_Reference.html#mcp4018">mcp4018 config section</a> is enabled.</p>
+<h4 id="set_digipot">SET_DIGIPOT<a class="headerlink" href="#set_digipot" title="Permanent link">&para;</a></h4>
+<p><code>SET_DIGIPOT DIGIPOT=config_name WIPER=&lt;value&gt;</code>: This command will change the current value of the digipot. This value should typically be between 0.0 and 1.0, unless a 'scale' is defined in the config. When 'scale' is defined, then this value should be between 0.0 and 'scale'.</p>
 <h3 id="led">[led]<a class="headerlink" href="#led" title="Permanent link">&para;</a></h3>
 <p>The following command is available when any of the <a href="Config_Reference.html#leds">led config sections</a> are enabled.</p>
 <h4 id="set_led">SET_LED<a class="headerlink" href="#set_led" title="Permanent link">&para;</a></h4>
--- a/zh-Hant/Sponsors.html
+++ b/zh-Hant/Sponsors.html
@@ -1358,7 +1358,7 @@
 <p>BIGTREETECH 是 Klipper 的主板官方贊助商。 BIGTREETECH 致力於開發具有創新性和競爭力的產品，以更好地服務於 3D 打印社區。在 <a href="https://www.facebook.com/BIGTREETECH">Facebook</a> 或 <a href="https://twitter.com/BigTreeTech">Twitter</a> 上關注他們。</p>
 <h2 id="klipper">Klipper開發人員<a class="headerlink" href="#klipper" title="Permanent link">&para;</a></h2>
 <h3 id="kevin-oconnor">Kevin O'Connor<a class="headerlink" href="#kevin-oconnor" title="Permanent link">&para;</a></h3>
-<p>Kevin 是 Klipper 的原始作者和當前維護者。Kevin 有一個 Patreon 頁面： <a href="https://www.patreon.com/koconnor">https://www.patreon.com/koconnor</a></p>
+<p>Kevin is the original author and current maintainer of Klipper. Donate at: <a href="https://ko-fi.com/koconnor">https://ko-fi.com/koconnor</a> or <a href="https://www.patreon.com/koconnor">https://www.patreon.com/koconnor</a></p>
 <h3 id="eric-callahan">Eric Callahan<a class="headerlink" href="#eric-callahan" title="Permanent link">&para;</a></h3>
 <p>Eric 是 bed_mesh、spi_flash 和其他幾個 Klipper 模塊的作者。 Eric 的捐款頁面位於： <a href="https://ko-fi.com/arksine">https://ko-fi.com/arksine</a></p>
 <h2 id="klipper_1">相關的 Klipper 項目<a class="headerlink" href="#klipper_1" title="Permanent link">&para;</a></h2>
--- a/zh-Hant/Status_Reference.html
+++ b/zh-Hant/Status_Reference.html
@@ -836,6 +836,13 @@
    exclude_object
  </a>
  
+</li>
+      
+        <li class="md-nav__item">
+  <a href="#extruder_stepper" class="md-nav__link">
+    extruder_stepper
+  </a>
+  
 </li>
      
        <li class="md-nav__item">
@@ -1576,6 +1583,13 @@
    exclude_object
  </a>
  
+</li>
+      
+        <li class="md-nav__item">
+  <a href="#extruder_stepper" class="md-nav__link">
+    extruder_stepper
+  </a>
+  
 </li>
      
        <li class="md-nav__item">
@@ -1896,6 +1910,12 @@
 <li><code>excluded_objects</code>: An array of strings listing the names of excluded objects.</li>
 <li><code>current_object</code>: The name of the object currently being printed.</li>
 </ul>
+<h2 id="extruder_stepper">extruder_stepper<a class="headerlink" href="#extruder_stepper" title="Permanent link">&para;</a></h2>
+<p>The following information is available for extruder_stepper objects (as well as <a href="Config_Reference.html#extruder">extruder</a> objects):</p>
+<ul>
+<li><code>pressure_advance</code>: The current <a href="Pressure_Advance.html">pressure advance</a> value.</li>
+<li><code>smooth_time</code>: The current pressure advance smooth time.</li>
+</ul>
 <h2 id="fan">fan<a class="headerlink" href="#fan" title="Permanent link">&para;</a></h2>
 <p><a href="Config_Reference.html#fan">fan</a>、<a href="Config_Reference.html#heater_fan">heater_fan some_name</a>和<a href="Config_Reference.html#controller_fan">controller_fan some_name</a>對像提供了以下資訊：</p>
 <ul>
@@ -2074,6 +2094,7 @@
 <li><code>extruder</code>：目前活躍的擠出機的名稱。例如，在宏中可以使用<code>printer[printer.toolhead.extruder].target</code>來獲取目前擠出機的目標溫度。</li>
 <li><code>homed_axes</code>：目前被認為處於「已歸位」狀態的車軸。這是一個包含一個或多個"x"、"y"、"z"的字串。</li>
 <li><code>axis_minimum</code>、<code>axis_maximum</code>：歸位后的軸的行程限制（毫米）。可以訪問此極限值的 x、y、z 份量（例如，<code>axis_minimum.x</code>、<code>axis_maximum.z</code>）。</li>
+<li>For Delta printers the <code>cone_start_z</code> is the max z height at maximum radius (<code>printer.toolhead.cone_start_z</code>).</li>
 <li><code>max_velocity</code>、<code>max_accel</code>、<code>max_accel_to_decel</code>和<code>square_corner_velocity</code>：目前生效的印表機限制。如果 <code>SET_VELOCITY_LIMIT</code>（或 <code>M204</code>）命令在執行時改變它們，這些值可能與配置檔案設定不同。</li>
 <li><code>stalls</code>：由於工具頭移動速度快于從 G 程式碼輸入讀取的移動速度，因此印表機必須暫停的總次數（自上次重新啟動以來）。</li>
 </ul>
--- a/zh-Hant/_klipper3d/pycache/mkdocs_hooks.cpython-38.pyc
+++ b/zh-Hant/_klipper3d/pycache/mkdocs_hooks.cpython-38.pyc
--- a/zh-Hant/search/search_index.json
+++ b/zh-Hant/search/search_index.json
--- a/zh-Hant/sitemap.xml
+++ b/zh-Hant/sitemap.xml
@@ -2,252 +2,252 @@
 <urlset xmlns="http://www.sitemaps.org/schemas/sitemap/0.9">
    <url>
         <loc>None</loc>
-         <lastmod>2022-09-11</lastmod>
+         <lastmod>2022-09-12</lastmod>
         <changefreq>daily</changefreq>
    </url>
    <url>
         <loc>None</loc>
-         <lastmod>2022-09-11</lastmod>
+         <lastmod>2022-09-12</lastmod>
         <changefreq>daily</changefreq>
    </url>
    <url>
         <loc>None</loc>
-         <lastmod>2022-09-11</lastmod>
+         <lastmod>2022-09-12</lastmod>
         <changefreq>daily</changefreq>
    </url>
    <url>
         <loc>None</loc>
-         <lastmod>2022-09-11</lastmod>
+         <lastmod>2022-09-12</lastmod>
         <changefreq>daily</changefreq>
    </url>
    <url>
         <loc>None</loc>
-         <lastmod>2022-09-11</lastmod>
+         <lastmod>2022-09-12</lastmod>
         <changefreq>daily</changefreq>
    </url>
    <url>
         <loc>None</loc>
-         <lastmod>2022-09-11</lastmod>
+         <lastmod>2022-09-12</lastmod>
         <changefreq>daily</changefreq>
    </url>
    <url>
         <loc>None</loc>
-         <lastmod>2022-09-11</lastmod>
+         <lastmod>2022-09-12</lastmod>
         <changefreq>daily</changefreq>
    </url>
    <url>
         <loc>None</loc>
-         <lastmod>2022-09-11</lastmod>
+         <lastmod>2022-09-12</lastmod>
         <changefreq>daily</changefreq>
    </url>
    <url>
         <loc>None</loc>
-         <lastmod>2022-09-11</lastmod>
+         <lastmod>2022-09-12</lastmod>
         <changefreq>daily</changefreq>
    </url>
    <url>
         <loc>None</loc>
-         <lastmod>2022-09-11</lastmod>
+         <lastmod>2022-09-12</lastmod>
         <changefreq>daily</changefreq>
    </url>
    <url>
         <loc>None</loc>
-         <lastmod>2022-09-11</lastmod>
+         <lastmod>2022-09-12</lastmod>
         <changefreq>daily</changefreq>
    </url>
    <url>
         <loc>None</loc>
-         <lastmod>2022-09-11</lastmod>
+         <lastmod>2022-09-12</lastmod>
         <changefreq>daily</changefreq>
    </url>
    <url>
         <loc>None</loc>
-         <lastmod>2022-09-11</lastmod>
+         <lastmod>2022-09-12</lastmod>
         <changefreq>daily</changefreq>
    </url>
    <url>
         <loc>None</loc>
-         <lastmod>2022-09-11</lastmod>
+         <lastmod>2022-09-12</lastmod>
         <changefreq>daily</changefreq>
    </url>
    <url>
         <loc>None</loc>
-         <lastmod>2022-09-11</lastmod>
+         <lastmod>2022-09-12</lastmod>
         <changefreq>daily</changefreq>
    </url>
    <url>
         <loc>None</loc>
-         <lastmod>2022-09-11</lastmod>
+         <lastmod>2022-09-12</lastmod>
         <changefreq>daily</changefreq>
    </url>
    <url>
         <loc>None</loc>
-         <lastmod>2022-09-11</lastmod>
+         <lastmod>2022-09-12</lastmod>
         <changefreq>daily</changefreq>
    </url>
    <url>
         <loc>None</loc>
-         <lastmod>2022-09-11</lastmod>
+         <lastmod>2022-09-12</lastmod>
         <changefreq>daily</changefreq>
    </url>
    <url>
         <loc>None</loc>
-         <lastmod>2022-09-11</lastmod>
+         <lastmod>2022-09-12</lastmod>
         <changefreq>daily</changefreq>
    </url>
    <url>
         <loc>None</loc>
-         <lastmod>2022-09-11</lastmod>
+         <lastmod>2022-09-12</lastmod>
         <changefreq>daily</changefreq>
    </url>
    <url>
         <loc>None</loc>
-         <lastmod>2022-09-11</lastmod>
+         <lastmod>2022-09-12</lastmod>
         <changefreq>daily</changefreq>
    </url>
    <url>
         <loc>None</loc>
-         <lastmod>2022-09-11</lastmod>
+         <lastmod>2022-09-12</lastmod>
         <changefreq>daily</changefreq>
    </url>
    <url>
         <loc>None</loc>
-         <lastmod>2022-09-11</lastmod>
+         <lastmod>2022-09-12</lastmod>
         <changefreq>daily</changefreq>
    </url>
    <url>
         <loc>None</loc>
-         <lastmod>2022-09-11</lastmod>
+         <lastmod>2022-09-12</lastmod>
         <changefreq>daily</changefreq>
    </url>
    <url>
         <loc>None</loc>
-         <lastmod>2022-09-11</lastmod>
+         <lastmod>2022-09-12</lastmod>
         <changefreq>daily</changefreq>
    </url>
    <url>
         <loc>None</loc>
-         <lastmod>2022-09-11</lastmod>
+         <lastmod>2022-09-12</lastmod>
         <changefreq>daily</changefreq>
    </url>
    <url>
         <loc>None</loc>
-         <lastmod>2022-09-11</lastmod>
+         <lastmod>2022-09-12</lastmod>
         <changefreq>daily</changefreq>
    </url>
    <url>
         <loc>None</loc>
-         <lastmod>2022-09-11</lastmod>
+         <lastmod>2022-09-12</lastmod>
         <changefreq>daily</changefreq>
    </url>
    <url>
         <loc>None</loc>
-         <lastmod>2022-09-11</lastmod>
+         <lastmod>2022-09-12</lastmod>
         <changefreq>daily</changefreq>
    </url>
    <url>
         <loc>None</loc>
-         <lastmod>2022-09-11</lastmod>
+         <lastmod>2022-09-12</lastmod>
         <changefreq>daily</changefreq>
    </url>
    <url>
         <loc>None</loc>
-         <lastmod>2022-09-11</lastmod>
+         <lastmod>2022-09-12</lastmod>
         <changefreq>daily</changefreq>
    </url>
    <url>
         <loc>None</loc>
-         <lastmod>2022-09-11</lastmod>
+         <lastmod>2022-09-12</lastmod>
         <changefreq>daily</changefreq>
    </url>
    <url>
         <loc>None</loc>
-         <lastmod>2022-09-11</lastmod>
+         <lastmod>2022-09-12</lastmod>
         <changefreq>daily</changefreq>
    </url>
    <url>
         <loc>None</loc>
-         <lastmod>2022-09-11</lastmod>
+         <lastmod>2022-09-12</lastmod>
         <changefreq>daily</changefreq>
    </url>
    <url>
         <loc>None</loc>
-         <lastmod>2022-09-11</lastmod>
+         <lastmod>2022-09-12</lastmod>
         <changefreq>daily</changefreq>
    </url>
    <url>
         <loc>None</loc>
-         <lastmod>2022-09-11</lastmod>
+         <lastmod>2022-09-12</lastmod>
         <changefreq>daily</changefreq>
    </url>
    <url>
         <loc>None</loc>
-         <lastmod>2022-09-11</lastmod>
+         <lastmod>2022-09-12</lastmod>
         <changefreq>daily</changefreq>
    </url>
    <url>
         <loc>None</loc>
-         <lastmod>2022-09-11</lastmod>
+         <lastmod>2022-09-12</lastmod>
         <changefreq>daily</changefreq>
    </url>
    <url>
         <loc>None</loc>
-         <lastmod>2022-09-11</lastmod>
+         <lastmod>2022-09-12</lastmod>
         <changefreq>daily</changefreq>
    </url>
    <url>
         <loc>None</loc>
-         <lastmod>2022-09-11</lastmod>
+         <lastmod>2022-09-12</lastmod>
         <changefreq>daily</changefreq>
    </url>
    <url>
         <loc>None</loc>
-         <lastmod>2022-09-11</lastmod>
+         <lastmod>2022-09-12</lastmod>
         <changefreq>daily</changefreq>
    </url>
    <url>
         <loc>None</loc>
-         <lastmod>2022-09-11</lastmod>
+         <lastmod>2022-09-12</lastmod>
         <changefreq>daily</changefreq>
    </url>
    <url>
         <loc>None</loc>
-         <lastmod>2022-09-11</lastmod>
+         <lastmod>2022-09-12</lastmod>
         <changefreq>daily</changefreq>
    </url>
    <url>
         <loc>None</loc>
-         <lastmod>2022-09-11</lastmod>
+         <lastmod>2022-09-12</lastmod>
         <changefreq>daily</changefreq>
    </url>
    <url>
         <loc>None</loc>
-         <lastmod>2022-09-11</lastmod>
+         <lastmod>2022-09-12</lastmod>
         <changefreq>daily</changefreq>
    </url>
    <url>
         <loc>None</loc>
-         <lastmod>2022-09-11</lastmod>
+         <lastmod>2022-09-12</lastmod>
         <changefreq>daily</changefreq>
    </url>
    <url>
         <loc>None</loc>
-         <lastmod>2022-09-11</lastmod>
+         <lastmod>2022-09-12</lastmod>
         <changefreq>daily</changefreq>
    </url>
    <url>
         <loc>None</loc>
-         <lastmod>2022-09-11</lastmod>
+         <lastmod>2022-09-12</lastmod>
         <changefreq>daily</changefreq>
    </url>
    <url>
         <loc>None</loc>
-         <lastmod>2022-09-11</lastmod>
+         <lastmod>2022-09-12</lastmod>
         <changefreq>daily</changefreq>
    </url>
    <url>
         <loc>None</loc>
-         <lastmod>2022-09-11</lastmod>
+         <lastmod>2022-09-12</lastmod>
         <changefreq>daily</changefreq>
    </url>
 </urlset>
--- a/zh-Hant/sitemap.xml.gz
+++ b/zh-Hant/sitemap.xml.gz