h3n3/klipper
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

axis_twist_compensation: AXIS_TWIST_COMPENSATION new parameter AUTO for autocalibration

Browse Source 
This commit adds automatic calculation support for compensating X and Y axis twist in the axis_twist_compensation module.

Signed-off-by: Jorge Apaza Merma <yochiwarez@gmail.com>
This commit is contained in:
yochiwarez
2024-10-23 01:12:46 +01:00
committed by KevinOConnor
parent 4f3a7fd227
commit 38bf6f2693
4 changed files with 225 additions and 24 deletions
Download Patch File Download Diff File Expand all files Collapse all files

12
docs/Config_Reference.md
View File

@@ -2083,9 +2083,9 @@ sensor_type: ldc1612
### [axis_twist_compensation]
A tool to compensate for inaccurate probe readings due to twist in X or Y gantry. See
the [Axis Twist Compensation Guide](Axis_Twist_Compensation.md) for more
detailed information regarding symptoms, configuration and setup.
A tool to compensate for inaccurate probe readings due to twist in X or Y
gantry. See the [Axis Twist Compensation Guide](Axis_Twist_Compensation.md)
for more detailed information regarding symptoms, configuration and setup.
```
[axis_twist_compensation]
@@ -2098,15 +2098,15 @@ detailed information regarding symptoms, configuration and setup.
calibrate_start_x: 20
# Defines the minimum X coordinate of the calibration
# This should be the X coordinate that positions the nozzle at the starting
# calibration position. This parameter must be provided.
# calibration position.
calibrate_end_x: 200
# Defines the maximum X coordinate of the calibration
# This should be the X coordinate that positions the nozzle at the ending
# calibration position. This parameter must be provided.
# calibration position.
calibrate_y: 112.5
# Defines the Y coordinate of the calibration
# This should be the Y coordinate that positions the nozzle during the
# calibration process. This parameter must be provided and is recommended to
# calibration process. This parameter is recommended to
# be near the center of the bed
# For Y-axis twist compensation, specify the following parameters: