h3n3/klipper
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

extruder: Fix SET_PRESSURE_ADVANCE so that it works with multiple extruders

Browse Source 
Use the new gcode.register_mux_command() so that SET_PRESSURE_ADVANCE
works correctly with multiple extruders.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
This commit is contained in:
Kevin O'Connor
2018-05-20 12:52:19 -04:00
parent 75a1e9ea21
commit 2ab47cd20c
3 changed files with 16 additions and 5 deletions
Download Patch File Download Diff File Expand all files Collapse all files

5
docs/G-Codes.md
View File

@@ -84,9 +84,10 @@ The following standard commands are supported:
[ACCEL_TO_DECEL=<value>] [JUNCTION_DEVIATION=<value>]`: Modify the
printer's velocity limits. Note that one may only set values less
than or equal to the limits specified in the config file.
- `SET_PRESSURE_ADVANCE [ADVANCE=<pressure_advance>]
- `SET_PRESSURE_ADVANCE [EXTRUDER=<config_name>] [ADVANCE=<pressure_advance>]
[ADVANCE_LOOKAHEAD_TIME=<pressure_advance_lookahead_time>]`:
Set pressure advance parameters.
Set pressure advance parameters. If EXTRUDER is not specified, it
defaults to the active extruder.
- `RESTART`: This will cause the host software to reload its config
and perform an internal reset. This command will not clear error
state from the micro-controller (see FIRMWARE_RESTART) nor will it