h3n3/klipper
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

tuning_tower: Add SKIP parameter

Browse Source 
Signed-off-by: Matthew Lloyd <github@matthewlloyd.net>
This commit is contained in:
github@matthewlloyd.net
2021-08-31 20:05:40 -04:00
committed by KevinOConnor
parent d7b04aa18f
commit 286cc1becc
2 changed files with 14 additions and 7 deletions
Download Patch File Download Diff File Expand all files Collapse all files

18
docs/G-Codes.md
View File

@@ -213,13 +213,17 @@ The following standard commands are supported:
This acts to take a frequently used babystepping value, and "make
it permanent". Requires a `SAVE_CONFIG` to take effect.
- `TUNING_TOWER COMMAND=<command> PARAMETER=<name> START=<value>
FACTOR=<value> [BAND=<value>]`: A tool for tuning a parameter on
each Z height during a print. The tool will run the given COMMAND
with the given PARAMETER assigned to the value using the formula
`value = start + factor * z_height`. If BAND is provided then the
adjustment will only be made every BAND millimeters of z height - in
that case the formula used is `value = start + factor *
((floor(z_height / band) + .5) * band)`.
FACTOR=<value> [BAND=<value>] [SKIP=<value>]`: A tool for tuning
a parameter on each Z height during a print. The tool will run
the given COMMAND with the given PARAMETER assigned to the value
using the formula `value = start + factor * z_height`. If BAND is
provided then the adjustment will only be made every BAND
millimeters of z height - in that case the formula used is
`value = start + factor * ((floor(z_height / band) + .5) * band)`.
If `SKIP=<value>` is specified, the tuning process doesn't begin
until Z height `<value>` is reached, and below that the value will
be set to `START`; in this case, the `z_height` used in the
formulas above is actually `max(z - skip, 0)`.
- `SET_DISPLAY_GROUP [DISPLAY=<display>] GROUP=<group>`: Set the
active display group of an lcd display. This allows to define
multiple display data groups in the config,