h3n3/klipper
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

heater: Add new TURN_OFF_HEATERS command

Browse Source 
Add a command that will turn off all heaters in the printer.  Run this
command in the default idle_timeout action.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
This commit is contained in:
Kevin O'Connor
2018-09-18 16:00:13 -04:00
parent 7b6a44e8f9
commit 174754299a
4 changed files with 12 additions and 1 deletions
Download Patch File Download Diff File Expand all files Collapse all files

1
docs/G-Codes.md
View File

@@ -96,6 +96,7 @@ The following standard commands are supported:
cycles. If the WRITE_FILE parameter is enabled, then the file
/tmp/heattest.txt will be created with a log of all temperature
samples taken during the test.
- `TURN_OFF_HEATERS`: Turn off all heaters.
- `SET_VELOCITY_LIMIT [VELOCITY=<value>] [ACCEL=<value>]
[ACCEL_TO_DECEL=<value>] [SQUARE_CORNER_VELOCITY=<value>]`: Modify
the printer's velocity limits. Note that one may only set values