gcode: Change respond_info() to log by default

It makes sense to log most respond_info() content, so do that by
default.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>

klippy/extras/bltouch.py

@@ -118,7 +118,6 @@ class BLTouchEndstopWrapper:
                     if retry >= 2:
                         raise
                     msg = "Failed to verify BLTouch probe is raised; retrying."
-                    logging.warning(msg)
                     self.gcode.respond_info(msg)
                     self.next_cmd_time += RETRY_RESET_TIME
                     continue
@@ -172,9 +171,7 @@ class BLTouchEndstopWrapper:
             self.gcode.respond_info("BLTouch commands: %s" % (
                 ", ".join(sorted([c for c in Commands if c is not None]))))
             return
-        msg = "Sending BLTOUCH_DEBUG COMMAND=%s" % (cmd,)
-        self.gcode.respond_info(msg)
-        logging.info(msg)
+        self.gcode.respond_info("Sending BLTOUCH_DEBUG COMMAND=%s" % (cmd,))
         self.sync_print_time()
         self.send_cmd(cmd, duration=self.pin_move_time)
         self.send_cmd(None)

klippy/extras/display/menu.py

@@ -1457,7 +1457,8 @@ class MenuManager:
             elif action == 'exit':
                 self.exit()
             elif action == 'respond':
-                self.gcode.respond_info("{}".format(' '.join(map(str, args))))
+                self.gcode.respond_info("{}".format(' '.join(map(str, args))),
+                                        log=False)
             elif action == 'event' and len(args) > 0:
                 if len(str(args[0])) > 0:
                     self.printer.send_event(
@@ -1530,11 +1531,9 @@ class MenuManager:
                         key1, key2,
                         self.parameters[key1].get(key2)
                     )
-                    logging.info(msg)
                     self.gcode.respond_info(msg)
             else:
                 msg = "{0} = {1}".format(key1, self.parameters.get(key1))
-                logging.info(msg)
                 self.gcode.respond_info(msg)
 
     # buttons & encoder callbacks

klippy/extras/tmc2130.py

@@ -280,15 +280,11 @@ class TMC2130:
         gcode.respond_info("========== Write-only registers ==========")
         for reg_name, val in self.regs.items():
             if reg_name not in ReadRegisters:
-                msg = self.fields.pretty_format(reg_name, val)
-                logging.info(msg)
-                gcode.respond_info(msg)
+                gcode.respond_info(self.fields.pretty_format(reg_name, val))
         gcode.respond_info("========== Queried registers ==========")
         for reg_name in ReadRegisters:
             val = self.get_register(reg_name)
-            msg = self.fields.pretty_format(reg_name, val)
-            logging.info(msg)
-            gcode.respond_info(msg)
+            gcode.respond_info(self.fields.pretty_format(reg_name, val))
     cmd_INIT_TMC_help = "Initialize TMC stepper driver registers"
     def cmd_INIT_TMC(self, params):
         logging.info("INIT_TMC 2130 %s", self.name)

klippy/extras/tmc2208.py

@@ -359,9 +359,7 @@ class TMC2208:
         gcode.respond_info("========== Write-only registers ==========")
         for reg_name, val in self.regs.items():
             if reg_name not in ReadRegisters:
-                msg = self.fields.pretty_format(reg_name, val)
-                logging.info(msg)
-                gcode.respond_info(msg)
+                gcode.respond_info(self.fields.pretty_format(reg_name, val))
         gcode.respond_info("========== Queried registers ==========")
         for reg_name in ReadRegisters:
             try:
@@ -373,9 +371,7 @@ class TMC2208:
             if reg_name == "IOIN":
                 drv_type = self.fields.get_field("SEL_A", val)
                 reg_name = "IOIN@TMC220x" if drv_type else "IOIN@TMC222x"
-            msg = self.fields.pretty_format(reg_name, val)
-            logging.info(msg)
-            gcode.respond_info(msg)
+            gcode.respond_info(self.fields.pretty_format(reg_name, val))
     cmd_INIT_TMC_help = "Initialize TMC stepper driver registers"
     def cmd_INIT_TMC(self, params):
         logging.info("INIT_TMC 2208 %s", self.name)

klippy/extras/z_tilt.py

@@ -84,7 +84,6 @@ class ZTilt:
         stepstrs = ["%s = %.6f" % (s.get_name(), so) for so, s in positions]
         msg = "Making the following Z adjustments:\n%s\nz_adjust = %.6f" % (
             "\n".join(stepstrs), z_adjust)
-        logging.info(msg)
         self.gcode.respond_info(msg)
         # Move each z stepper (sorted from lowest to highest) until they match
         positions.sort()