h3n3/klipper
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

docs: Move config reference information to new Config_Reference.md

Browse Source 
Move all the config reference information from files in the config/
directory to a new Config_Reference.md document.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
This commit is contained in:
Kevin O'Connor
2020-11-16 18:47:32 -05:00
parent 9fd8f7761e
commit 15b5dbaf8f
120 changed files with 1955 additions and 1378 deletions
Download Patch File Download Diff File Expand all files Collapse all files

7
docs/Endstop_Phase.md
View File

@@ -105,8 +105,8 @@ Additional notes
enable this feature be sure the G-Code slicer is configured with a
layer height that is a multiple of a "full step", manually enable
the endstop_align_zero option in the endstop_phase config section
(see config/example-extras.cfg for further details), and then
re-level the bed screws.
(see [config reference](Config_Reference.md#endstop_phase) for
further details), and then re-level the bed screws.
* It is possible to use this system with traditional (non-Trinamic)
stepper motor drivers. However, doing this requires making sure that
@@ -122,4 +122,5 @@ Additional notes
power reset, which would arrange for both the micro-controller and
stepper motor drivers to be reset together. If using this mechanism,
one would then need to manually configure the "endstop_phase" config
sections (see config/example-extras.cfg for the details).
sections (see [config reference](Config_Reference.md#endstop_phase)
for the details).