Deploying to gh-pages from @ Klipper3d/klipper@1cc6398074 🚀

zh/Status_Reference.html

@@ -875,6 +875,13 @@
     bed_screws
   </a>
   
+</li>
+      
+        <li class="md-nav__item">
+  <a href="#canbus_stats" class="md-nav__link">
+    canbus_stats
+  </a>
+  
 </li>
       
         <li class="md-nav__item">
@@ -994,6 +1001,13 @@
     led
   </a>
   
+</li>
+      
+        <li class="md-nav__item">
+  <a href="#load_cell" class="md-nav__link">
+    load_cell
+  </a>
+  
 </li>
       
         <li class="md-nav__item">
@@ -1085,6 +1099,13 @@
     servo
   </a>
   
+</li>
+      
+        <li class="md-nav__item">
+  <a href="#skew_correctionpy" class="md-nav__link">
+    skew_correction.py
+  </a>
+  
 </li>
       
         <li class="md-nav__item">
@@ -1639,8 +1660,8 @@
   
   
     <li class="md-nav__item">
-      <a href="Load_Cell.md" class="md-nav__link">
-        None
+      <a href="Load_Cell.html" class="md-nav__link">
+        Load Cells
       </a>
     </li>
   
@@ -1713,6 +1734,13 @@
     bed_screws
   </a>
   
+</li>
+      
+        <li class="md-nav__item">
+  <a href="#canbus_stats" class="md-nav__link">
+    canbus_stats
+  </a>
+  
 </li>
       
         <li class="md-nav__item">
@@ -1832,6 +1860,13 @@
     led
   </a>
   
+</li>
+      
+        <li class="md-nav__item">
+  <a href="#load_cell" class="md-nav__link">
+    load_cell
+  </a>
+  
 </li>
       
         <li class="md-nav__item">
@@ -1923,6 +1958,13 @@
     servo
   </a>
   
+</li>
+      
+        <li class="md-nav__item">
+  <a href="#skew_correctionpy" class="md-nav__link">
+    skew_correction.py
+  </a>
+  
 </li>
       
         <li class="md-nav__item">
@@ -2041,13 +2083,22 @@
 <li><code>profiles</code>：当前定义的配置，使用 BED_MESH_PROFILE 进行设置。</li>
 </ul>
 <h2 id="bed_screws">bed_screws<a class="headerlink" href="#bed_screws" title="Permanent link">&para;</a></h2>
-<p><code>Config_Reference.md#bed_screws</code> 对象中提供了以下信息：</p>
+<p>The following information is available in the <a href="Config_Reference.html#bed_screws">bed_screws</a> object:</p>
 <ul>
 <li><code>is_active</code>：如果床调平螺丝调整工具当前处于活动状态，则返回 True。</li>
 <li><code>state</code>：床调平螺丝调整工具状态。它可以是以下字符串之一："adjust", "fine"。</li>
 <li><code>current_screw</code>：当前正在被调整的螺丝的索引。</li>
 <li><code>accepted_screws</code>：已被接受的螺丝数量。</li>
 </ul>
+<h2 id="canbus_stats">canbus_stats<a class="headerlink" href="#canbus_stats" title="Permanent link">&para;</a></h2>
+<p>The following information is available in the <code>canbus_stats some_mcu_name</code> object (this object is automatically available if an mcu is configured to use canbus):</p>
+<ul>
+<li><code>rx_error</code>: The number of receive errors detected by the micro-controller canbus hardware.</li>
+<li><code>tx_error</code>: The number of transmit errors detected by the micro-controller canbus hardware.</li>
+<li><code>tx_retries</code>: The number of transmit attempts that were retried due to bus contention or errors.</li>
+<li><code>bus_state</code>: The status of the interface (typically "active" for a bus in normal operation, "warn" for a bus with recent errors, "passive" for a bus that will no longer transmit canbus error frames, or "off" for a bus that will no longer transmit or receive messages).</li>
+</ul>
+<p>Note that only the rp2XXX micro-controllers report a non-zero <code>tx_retries</code> field and the rp2XXX micro-controllers always report <code>tx_error</code> as zero and <code>bus_state</code> as "active".</p>
 <h2 id="configfile">configfile<a class="headerlink" href="#configfile" title="Permanent link">&para;</a></h2>
 <p><code>configfile</code> 对象中提供了以下信息（该对象始终可用）：</p>
 <ul>
@@ -2161,6 +2212,7 @@
 <h2 id="hall_filament_width_sensor">hall_filament_width_sensor<a class="headerlink" href="#hall_filament_width_sensor" title="Permanent link">&para;</a></h2>
 <p><a href="Config_Reference.html#hall_filament_width_sensor">hall_filament_width_sensor</a> 对象提供了以下信息：</p>
 <ul>
+<li>all items from <a href="Status_Reference.html#filament_switch_sensor">filament_switch_sensor</a></li>
 <li><code>is_active</code>：如果传感器当前处于活动状态，返回True。</li>
 <li><code>Diameter</code>：上一次传感器读数，单位为 mm。</li>
 <li><code>Raw</code>：上一次传感器原始 ADC 读数。</li>
@@ -2191,6 +2243,17 @@
 <ul>
 <li><code>color_data</code>：一个包含链中每个LED的RGBW值的颜色列表的列表。每个值都以0.0到1.0的浮点数表示。每个颜色列表包含4个项目（红、绿、蓝、白），即使底层的LED支持较少的颜色通道。例如，可以通过<code>printer["neopixel &lt;配置名&gt;"].color_data[1][2]</code>访问链中第二个neopixel的蓝色值（颜色列表中的第三项）。</li>
 </ul>
+<h2 id="load_cell">load_cell<a class="headerlink" href="#load_cell" title="Permanent link">&para;</a></h2>
+<p>The following information is available for each <code>[load_cell name]</code>:</p>
+<ul>
+<li>'is_calibrated': True/False is the load cell calibrated</li>
+<li>'counts_per_gram': The number of raw sensor counts that equals 1 gram of force</li>
+<li>'reference_tare_counts': The reference number of raw sensor counts for 0 force</li>
+<li>'tare_counts': The current number of raw sensor counts for 0 force</li>
+<li>'force_g': The force in grams, averaged over the last polling period.</li>
+<li>'min_force_g': The minimum force in grams, over the last polling period.</li>
+<li>'max_force_g': The maximum force in grams, over the last polling period.</li>
+</ul>
 <h2 id="manual_probe">manual_probe<a class="headerlink" href="#manual_probe" title="Permanent link">&para;</a></h2>
 <p><code>manual_probe</code> 对象中提供了以下信息：</p>
 <ul>
@@ -2278,6 +2341,11 @@
 <ul>
 <li><code>printer["servo &lt;配置名&gt;"].value</code>：与指定伺服相关 PWM 引脚的上一次设置的值（0.0 和 1.0 之间的值）。</li>
 </ul>
+<h2 id="skew_correctionpy">skew_correction.py<a class="headerlink" href="#skew_correctionpy" title="Permanent link">&para;</a></h2>
+<p>The following information is available in the <code>skew_correction</code> object (this object is available if any skew_correction is defined):</p>
+<ul>
+<li><code>current_profile_name</code>: Returns the name of the currently loaded SKEW_PROFILE.</li>
+</ul>
 <h2 id="stepper_enable">stepper_enable<a class="headerlink" href="#stepper_enable" title="Permanent link">&para;</a></h2>
 <p>以下信息可在<code>stepper_enable</code> 对象中获得（这个对象在定义了任何步进电机后可用）：</p>
 <ul>