h3n3/klipper
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Deploying to gh-pages from @ Klipper3d/klipper@7b490f3ec1 🚀

Browse Source
This commit is contained in:
KevinOConnor
2024-04-28 00:05:14 +00:00
parent 15e16ec351
commit 03f81ee535
83 changed files with 1973 additions and 1233 deletions
Download Patch File Download Diff File Expand all files Collapse all files

175
zh-Hant/G-Codes.html
View File

@@ -841,6 +841,26 @@
</ul>
</nav>
</li>
<li class="md-nav__item">
<a href="#axis_twist_compensation" class="md-nav__link">
[axis_twist_compensation]
</a>
<nav class="md-nav" aria-label="[axis_twist_compensation]">
<ul class="md-nav__list">
<li class="md-nav__item">
<a href="#axis_twist_compensation_calibrate" class="md-nav__link">
AXIS_TWIST_COMPENSATION_CALIBRATE
</a>
</li>
</ul>
</nav>
</li>
<li class="md-nav__item">
@@ -1188,20 +1208,6 @@
SYNC_EXTRUDER_MOTION
</a>
</li>
<li class="md-nav__item">
<a href="#set_extruder_step_distance" class="md-nav__link">
SET_EXTRUDER_STEP_DISTANCE
</a>
</li>
<li class="md-nav__item">
<a href="#sync_stepper_to_extruder" class="md-nav__link">
SYNC_STEPPER_TO_EXTRUDER
</a>
</li>
</ul>
@@ -1858,6 +1864,26 @@
</ul>
</nav>
</li>
<li class="md-nav__item">
<a href="#pwm_cycle_time" class="md-nav__link">
[pwm_cycle_time]
</a>
<nav class="md-nav" aria-label="[pwm_cycle_time]">
<ul class="md-nav__list">
<li class="md-nav__item">
<a href="#set_pin_1" class="md-nav__link">
SET_PIN
</a>
</li>
</ul>
</nav>
</li>
<li class="md-nav__item">
@@ -2262,26 +2288,6 @@
</ul>
</nav>
</li>
<li class="md-nav__item">
<a href="#axis_twist_compensation" class="md-nav__link">
[axis_twist_compensation]
</a>
<nav class="md-nav" aria-label="[axis_twist_compensation]">
<ul class="md-nav__list">
<li class="md-nav__item">
<a href="#axis_twist_compensation_calibrate" class="md-nav__link">
AXIS_TWIST_COMPENSATION_CALIBRATE
</a>
</li>
</ul>
</nav>
</li>
<li class="md-nav__item">
@@ -2980,6 +2986,26 @@
</ul>
</nav>
</li>
<li class="md-nav__item">
<a href="#axis_twist_compensation" class="md-nav__link">
[axis_twist_compensation]
</a>
<nav class="md-nav" aria-label="[axis_twist_compensation]">
<ul class="md-nav__list">
<li class="md-nav__item">
<a href="#axis_twist_compensation_calibrate" class="md-nav__link">
AXIS_TWIST_COMPENSATION_CALIBRATE
</a>
</li>
</ul>
</nav>
</li>
<li class="md-nav__item">
@@ -3327,20 +3353,6 @@
SYNC_EXTRUDER_MOTION
</a>
</li>
<li class="md-nav__item">
<a href="#set_extruder_step_distance" class="md-nav__link">
SET_EXTRUDER_STEP_DISTANCE
</a>
</li>
<li class="md-nav__item">
<a href="#sync_stepper_to_extruder" class="md-nav__link">
SYNC_STEPPER_TO_EXTRUDER
</a>
</li>
</ul>
@@ -3997,6 +4009,26 @@
</ul>
</nav>
</li>
<li class="md-nav__item">
<a href="#pwm_cycle_time" class="md-nav__link">
[pwm_cycle_time]
</a>
<nav class="md-nav" aria-label="[pwm_cycle_time]">
<ul class="md-nav__list">
<li class="md-nav__item">
<a href="#set_pin_1" class="md-nav__link">
SET_PIN
</a>
</li>
</ul>
</nav>
</li>
<li class="md-nav__item">
@@ -4401,26 +4433,6 @@
</ul>
</nav>
</li>
<li class="md-nav__item">
<a href="#axis_twist_compensation" class="md-nav__link">
[axis_twist_compensation]
</a>
<nav class="md-nav" aria-label="[axis_twist_compensation]">
<ul class="md-nav__list">
<li class="md-nav__item">
<a href="#axis_twist_compensation_calibrate" class="md-nav__link">
AXIS_TWIST_COMPENSATION_CALIBRATE
</a>
</li>
</ul>
</nav>
</li>
<li class="md-nav__item">
@@ -4545,10 +4557,15 @@
<p><code>ANGLE_DEBUG_READ CHIP=&lt;config_name&gt; REG=&lt;register&gt;</code>: Queries sensor register "register" (e.g. 44 or 0x2C). Can be useful for debugging purposes. This is only available for tle5012b chips.</p>
<h4 id="angle_debug_write">ANGLE_DEBUG_WRITE<a class="headerlink" href="#angle_debug_write" title="Permanent link">&para;</a></h4>
<p><code>ANGLE_DEBUG_WRITE CHIP=&lt;config_name&gt; REG=&lt;register&gt; VAL=&lt;value&gt;</code>: Writes raw "value" into register "register". Both "value" and "register" can be a decimal or a hexadecimal integer. Use with care, and refer to sensor data sheet for the reference. This is only available for tle5012b chips.</p>
<h3 id="axis_twist_compensation">[axis_twist_compensation]<a class="headerlink" href="#axis_twist_compensation" title="Permanent link">&para;</a></h3>
<p>The following commands are available when the <a href="Config_Reference.html#axis_twist_compensation">axis_twist_compensation config
section</a> is enabled.</p>
<h4 id="axis_twist_compensation_calibrate">AXIS_TWIST_COMPENSATION_CALIBRATE<a class="headerlink" href="#axis_twist_compensation_calibrate" title="Permanent link">&para;</a></h4>
<p><code>AXIS_TWIST_COMPENSATION_CALIBRATE [SAMPLE_COUNT=&lt;value&gt;]</code>: Initiates the X twist calibration wizard. <code>SAMPLE_COUNT</code> specifies the number of points along the X axis to calibrate at and defaults to 3.</p>
<h3 id="bed_mesh">[bed_mesh]<a class="headerlink" href="#bed_mesh" title="Permanent link">&para;</a></h3>
<p>當啟用 <a href="Config_Reference.html#bed_mesh">bed_mesh config section</a> 時，以下命令可用（另請參閱 <a href="Bed_Mesh.html">bed mesh guide</a>）。</p>
<h4 id="bed_mesh_calibrate">BED_MESH_CALIBRATE<a class="headerlink" href="#bed_mesh_calibrate" title="Permanent link">&para;</a></h4>
<p><code>BED_MESH_CALIBRATE [METHOD=manual] [HORIZONTAL_MOVE_Z=&lt;value&gt;] [&lt;probe_parameter&gt;=&lt;value&gt;] [&lt;mesh_parameter&gt;=&lt;value&gt;]</code>: This command probes the bed using generated points specified by the parameters in the config. After probing, a mesh is generated and z-movement is adjusted according to the mesh. See the PROBE command for details on the optional probe parameters. If METHOD=manual is specified then the manual probing tool is activated - see the MANUAL_PROBE command above for details on the additional commands available while this tool is active. The optional <code>HORIZONTAL_MOVE_Z</code> value overrides the <code>horizontal_move_z</code> option specified in the config file.</p>
<p><code>BED_MESH_CALIBRATE [PROFILE=&lt;name&gt;] [METHOD=manual] [HORIZONTAL_MOVE_Z=&lt;value&gt;] [&lt;probe_parameter&gt;=&lt;value&gt;] [&lt;mesh_parameter&gt;=&lt;value&gt;] [ADAPTIVE=1] [ADAPTIVE_MARGIN=&lt;value&gt;]</code>: This command probes the bed using generated points specified by the parameters in the config. After probing, a mesh is generated and z-movement is adjusted according to the mesh. The mesh will be saved into a profile specified by the <code>PROFILE</code> parameter, or <code>default</code> if unspecified. See the PROBE command for details on the optional probe parameters. If METHOD=manual is specified then the manual probing tool is activated - see the MANUAL_PROBE command above for details on the additional commands available while this tool is active. The optional <code>HORIZONTAL_MOVE_Z</code> value overrides the <code>horizontal_move_z</code> option specified in the config file. If ADAPTIVE=1 is specified then the objects defined by the Gcode file being printed will be used to define the probed area. The optional <code>ADAPTIVE_MARGIN</code> value overrides the <code>adaptive_margin</code> option specified in the config file.</p>
<h4 id="bed_mesh_output">BED_MESH_OUTPUT<a class="headerlink" href="#bed_mesh_output" title="Permanent link">&para;</a></h4>
<p><code>BED_MESH_OUTPUT PGP=[&lt;0:1&gt;]</code>：該命令將目前探測到的 Z 值和目前網格的值輸出到終端。如果指定 PGP=1，則將bed_mesh產生的X、Y座標，以及它們關聯的指數，輸出到終端。</p>
<h4 id="bed_mesh_map">BED_MESH_MAP<a class="headerlink" href="#bed_mesh_map" title="Permanent link">&para;</a></h4>
@@ -4558,7 +4575,7 @@
<h4 id="bed_mesh_profile">BED_MESH_PROFILE<a class="headerlink" href="#bed_mesh_profile" title="Permanent link">&para;</a></h4>
<p><code>BED_MESH_PROFILE LOAD=&lt;名稱&gt; SAVE=&lt;名稱&gt; REMOVE=&lt;名稱&gt;</code>：此命令提供了網床配置管理功能。LOAD 將從與所提供的名稱相符的配置檔案中恢復網格狀態。SAVE 將會把目前的網格狀態儲存到與提供的名稱相符的配置檔案中。REMOVE（移除）將從永續性記憶體中刪除與所提供名稱相符的配置檔案。請注意，在 SAVE 或 REMOVE 操作后，必須發送SAVE_CONFIG G程式碼，以儲存變更到永續性記憶體。</p>
<h4 id="bed_mesh_offset">BED_MESH_OFFSET<a class="headerlink" href="#bed_mesh_offset" title="Permanent link">&para;</a></h4>
<p><code>BED_MESH_OFFSET [X=&lt;value&gt;] [Y=&lt;value&gt;]</code>。將X和/或Y的偏移量應用於網格查詢。這對具有多個獨立擠出頭的印表機很有用，因為偏移量對切換工具頭后產生正確的 Z 值調整是至關重要的。</p>
<p><code>BED_MESH_OFFSET [X=&lt;value&gt;] [Y=&lt;value&gt;] [ZFADE=&lt;value]</code>: Applies X, Y, and/or ZFADE offsets to the mesh lookup. This is useful for printers with independent extruders, as an offset is necessary to produce correct Z adjustment after a tool change. Note that a ZFADE offset does not apply additional z-adjustment directly, it is used to correct the <code>fade</code> calculation when a <code>gcode offset</code> has been applied to the Z axis.</p>
<h3 id="bed_screws">[bed_screws]<a class="headerlink" href="#bed_screws" title="Permanent link">&para;</a></h3>
<p>當啟用 <a href="Config_Reference.html#bed_screws">bed_screws config section</a> 時，以下命令可用（另請參閱 <a href="Manual_Level.html#adjusting-bed-leveling-screws">manual level guide</a>）。</p>
<h4 id="bed_screws_adjust">BED_SCREWS_ADJUST<a class="headerlink" href="#bed_screws_adjust" title="Permanent link">&para;</a></h4>
@@ -4644,10 +4661,6 @@
<p><code>SET_EXTRUDER_ROTATION_DISTANCE EXTRUDER=&lt;config_name&gt; [DISTANCE=&lt;distance&gt;]</code>: Set a new value for the provided extruder stepper's "rotation distance" (as defined in an <a href="Config_Reference.html#extruder">extruder</a> or <a href="Config_Reference.html#extruder_stepper">extruder_stepper</a> config section). If the rotation distance is a negative number then the stepper motion will be inverted (relative to the stepper direction specified in the config file). Changed settings are not retained on Klipper reset. Use with caution as small changes can result in excessive pressure between extruder and hotend. Do proper calibration with filament before use. If 'DISTANCE' value is not provided then this command will return the current rotation distance.</p>
<h4 id="sync_extruder_motion">SYNC_EXTRUDER_MOTION<a class="headerlink" href="#sync_extruder_motion" title="Permanent link">&para;</a></h4>
<p><code>SYNC_EXTRUDER_MOTION EXTRUDER=&lt;name&gt; MOTION_QUEUE=&lt;name&gt;</code>: This command will cause the stepper specified by EXTRUDER (as defined in an <a href="Config_Reference.html#extruder">extruder</a> or <a href="Config_Reference.html#extruder_stepper">extruder_stepper</a> config section) to become synchronized to the movement of an extruder specified by MOTION_QUEUE (as defined in an <a href="Config_Reference.html#extruder">extruder</a> config section). If MOTION_QUEUE is an empty string then the stepper will be desynchronized from all extruder movement.</p>
<h4 id="set_extruder_step_distance">SET_EXTRUDER_STEP_DISTANCE<a class="headerlink" href="#set_extruder_step_distance" title="Permanent link">&para;</a></h4>
<p>此命令已棄用，並將在不久的將來被刪除。</p>
<h4 id="sync_stepper_to_extruder">SYNC_STEPPER_TO_EXTRUDER<a class="headerlink" href="#sync_stepper_to_extruder" title="Permanent link">&para;</a></h4>
<p>此命令已棄用，並將在不久的將來被刪除。</p>
<h3 id="fan_generic">[fan_generic]<a class="headerlink" href="#fan_generic" title="Permanent link">&para;</a></h3>
<p>當啟用 <a href="Config_Reference.html#fan_generic">fan_generic config section</a> 時，以下命令可用。</p>
<h4 id="set_fan_speed">SET_FAN_SPEED<a class="headerlink" href="#set_fan_speed" title="Permanent link">&para;</a></h4>
@@ -4769,8 +4782,7 @@
<h3 id="output_pin">[output_pin]<a class="headerlink" href="#output_pin" title="Permanent link">&para;</a></h3>
<p>當啟用 <a href="Config_Reference.html#output_pin">output_pin config section</a> 時，以下命令可用。</p>
<h4 id="set_pin">SET_PIN<a class="headerlink" href="#set_pin" title="Permanent link">&para;</a></h4>
<p><code>SET_PIN PIN=config_name VALUE=&lt;value&gt; [CYCLE_TIME=&lt;cycle_time&gt;]</code>: Set the pin to the given output <code>VALUE</code>. VALUE should be 0 or 1 for "digital" output pins. For PWM pins, set to a value between 0.0 and 1.0, or between 0.0 and <code>scale</code> if a scale is configured in the output_pin config section.</p>
<p>Some pins (currently only "soft PWM" pins) support setting an explicit cycle time using the CYCLE_TIME parameter (specified in seconds). Note that the CYCLE_TIME parameter is not stored between SET_PIN commands (any SET_PIN command without an explicit CYCLE_TIME parameter will use the <code>cycle_time</code> specified in the output_pin config section).</p>
<p><code>SET_PIN PIN=config_name VALUE=&lt;value&gt;</code>: Set the pin to the given output <code>VALUE</code>. VALUE should be 0 or 1 for "digital" output pins. For PWM pins, set to a value between 0.0 and 1.0, or between 0.0 and <code>scale</code> if a scale is configured in the output_pin config section.</p>
<h3 id="palette2">[palette2]<a class="headerlink" href="#palette2" title="Permanent link">&para;</a></h3>
<p>啟用 <a href="Config_Reference.html#palette2">palette2 config section</a> 時，以下命令可用。</p>
<p>Palette列印通過在GCode檔案中嵌入特殊的OCodes（Omega Codes）來工作:</p>
@@ -4818,6 +4830,10 @@
<p><code>PROBE_CALIBRATE [SPEED=&lt;speed&gt;] [&lt;probe_parameter&gt;=&lt;value&gt;]</code>:執行一個對校準測頭的z_offset有用的輔助指令碼。有關可選測頭參數的詳細資訊，請參見PROBE命令。參見MANUAL_PROBE命令，瞭解SPEED參數和工具啟用時可用的附加命令的詳細資訊。請注意，PROBE_CALIBRATE命令使用速度變數在XY方向以及Z方向上移動。</p>
<h4 id="z_offset_apply_probe">Z_OFFSET_APPLY_PROBE<a class="headerlink" href="#z_offset_apply_probe" title="Permanent link">&para;</a></h4>
<p><code>Z_OFFSET_APPLY_PROBE</code>：將目前的Z 的 G 程式碼偏移量（就是 babystepping）從 probe 的 z_offset 中減去。該命令將持久化一個常用babystepping 微調值。需要執行 <code>SAVE_CONFIG</code>才能生效。</p>
<h3 id="pwm_cycle_time">[pwm_cycle_time]<a class="headerlink" href="#pwm_cycle_time" title="Permanent link">&para;</a></h3>
<p>The following command is available when a <a href="Config_Reference.html#pwm_cycle_time">pwm_cycle_time config section</a> is enabled.</p>
<h4 id="set_pin_1">SET_PIN<a class="headerlink" href="#set_pin_1" title="Permanent link">&para;</a></h4>
<p><code>SET_PIN PIN=config_name VALUE=&lt;value&gt; [CYCLE_TIME=&lt;cycle_time&gt;]</code>: This command works similarly to <a href="#output_pin">output_pin</a> SET_PIN commands. The command here supports setting an explicit cycle time using the CYCLE_TIME parameter (specified in seconds). Note that the CYCLE_TIME parameter is not stored between SET_PIN commands (any SET_PIN command without an explicit CYCLE_TIME parameter will use the <code>cycle_time</code> specified in the pwm_cycle_time config section).</p>
<h3 id="query_adc">[query_adc]<a class="headerlink" href="#query_adc" title="Permanent link">&para;</a></h3>
<p>The query_adc module is automatically loaded.</p>
<h4 id="query_adc_1">QUERY_ADC<a class="headerlink" href="#query_adc_1" title="Permanent link">&para;</a></h4>
@@ -4909,7 +4925,7 @@
<h3 id="toolhead">[toolhead]<a class="headerlink" href="#toolhead" title="Permanent link">&para;</a></h3>
<p>模組toolhead已自動載入.</p>
<h4 id="set_velocity_limit">SET_VELOCITY_LIMIT<a class="headerlink" href="#set_velocity_limit" title="Permanent link">&para;</a></h4>
<p><code>SET_VELOCITY_LIMIT [VELOCITY=&lt;值&gt;] [ACCEL=&lt;值&gt;] [ACCEL_TO_DECEL=&lt;值&gt;] [SQUARE_CORNER_VELOCITY=&lt;值&gt;]</code>：修改印表機速度限制。</p>
<p><code>SET_VELOCITY_LIMIT [VELOCITY=&lt;value&gt;] [ACCEL=&lt;value&gt;] [MINIMUM_CRUISE_RATIO=&lt;value&gt;] [SQUARE_CORNER_VELOCITY=&lt;value&gt;]</code>: This command can alter the velocity limits that were specified in the printer config file. See the <a href="Config_Reference.html#printer">printer config section</a> for a description of each parameter.</p>
<h3 id="tuning_tower">[tuning_tower]<a class="headerlink" href="#tuning_tower" title="Permanent link">&para;</a></h3>
<p>模組 tuning_tower已自動載入.</p>
<h4 id="tuning_tower_1">TUNING_TOWER<a class="headerlink" href="#tuning_tower_1" title="Permanent link">&para;</a></h4>
@@ -4935,11 +4951,6 @@
<p><code>SDCARD_PRINT_FILE FILENAME=&lt;檔名&gt;</code>：載入一個檔案並開始 SD 列印.</p>
<h4 id="sdcard_reset_file">SDCARD_RESET_FILE<a class="headerlink" href="#sdcard_reset_file" title="Permanent link">&para;</a></h4>
<p><code>SDCARD_RESET_FILE</code>：解除安裝檔案並清除SD狀態。</p>
<h3 id="axis_twist_compensation">[axis_twist_compensation]<a class="headerlink" href="#axis_twist_compensation" title="Permanent link">&para;</a></h3>
<p>The following commands are available when the <a href="Config_Reference.html#axis_twist_compensation">axis_twist_compensation config
section</a> is enabled.</p>
<h4 id="axis_twist_compensation_calibrate">AXIS_TWIST_COMPENSATION_CALIBRATE<a class="headerlink" href="#axis_twist_compensation_calibrate" title="Permanent link">&para;</a></h4>
<p><code>AXIS_TWIST_COMPENSATION_CALIBRATE [SAMPLE_COUNT=&lt;value&gt;]</code>: Initiates the X twist calibration wizard. <code>SAMPLE_COUNT</code> specifies the number of points along the X axis to calibrate at and defaults to 3.</p>
<h3 id="z_thermal_adjust">[z_thermal_adjust]<a class="headerlink" href="#z_thermal_adjust" title="Permanent link">&para;</a></h3>
<p>The following commands are available when the <a href="Config_Reference.html#z_thermal_adjust">z_thermal_adjust config section</a> is enabled.</p>
<h4 id="set_z_thermal_adjust">SET_Z_THERMAL_ADJUST<a class="headerlink" href="#set_z_thermal_adjust" title="Permanent link">&para;</a></h4>