h3n3/endorphin
1
0
Fork 0
Code Issues 8 Pull Requests 1 Packages Projects Releases Wiki Activity

Add next/back btns

Browse Source
This commit is contained in:
Endorphin3D
2023-05-14 16:01:19 -04:00
parent 348af3dff8
commit fc17fd1c41
5 changed files with 76 additions and 5 deletions
Download Patch File Download Diff File Expand all files Collapse all files

6
docs/stages/stage-1.md
View File

@@ -62,4 +62,8 @@ If you're using a direct drive extruder, you can make use of your old extruder s
In fact, even if you *are* running the original extruder, you can still swap the extruder and X motors without issue. As long as your hotend is able to keep up with the filament feed rate, your extruder stepper doesn't need an enormous amount of torque.
## Tune Stepper Current
## Tune Stepper Current
---
[← Back](/docs/stages){: .btn .btn-outline .mr-4 .fs-5 } [Next →](/docs/stages/stage-2){: .btn .btn-outline .fs-5 }

2
docs/stages/stages.md
View File

@@ -24,4 +24,6 @@ Endorphin was designed to be progressively upgraded--so you can get started with
---
[← Back](/docs/getting-started){: .btn .btn-outline .mr-4 .fs-5 } [Next →](/docs/stages/stage-1){: .btn .btn-outline .fs-5 }
[^1]: Because stage 3 adds a linear rail to the X axis, the weight of the new rail does negate the weight saved by dropping the v-slot printhead carriage. This stage isn't as much about dropping weight as the other two stages were. The benefits of this stage are mainly more print consistency on the X axis, access to the awesome Ratrig and Vz printheads, and complete liberation from those v-slot wheels.