From ee9745cf69a52b4d60556e7002b2473be8b680a8 Mon Sep 17 00:00:00 2001 From: danw87 <123868814+danw87@users.noreply.github.com> Date: Mon, 30 Jan 2023 20:59:37 +0000 Subject: [PATCH] Created (EN) Common Issues | TFT Upload When nspanel-lovelace-ui has been installed (markdown) --- ...n-nspanel-lovelace-ui-has-been-installed.md | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) create mode 100644 (EN)-Common-Issues-|-TFT-Upload-When-nspanel-lovelace-ui-has-been-installed.md diff --git a/(EN)-Common-Issues-|-TFT-Upload-When-nspanel-lovelace-ui-has-been-installed.md b/(EN)-Common-Issues-|-TFT-Upload-When-nspanel-lovelace-ui-has-been-installed.md new file mode 100644 index 0000000..2368b16 --- /dev/null +++ b/(EN)-Common-Issues-|-TFT-Upload-When-nspanel-lovelace-ui-has-been-installed.md @@ -0,0 +1,18 @@ +> _**in the version "nspanel-lovelace-ui" from joBr99 are a few special features built in, which make it not so easy to flash a new version and TFT on the NSPanel. But since we already had this problem, we have of course already a solution for you ;)**_ + +### _**It is necessary to upload a "Blank TFT" file while "Lovelace ui" is still installed on the NSPanel.**_ + +> IMPORTANT! If you have already installed the NSPanel with my version, you must first fully install "Lovelace ui" again. + +### The following steps are necessary: + +1. download the file _**"nspanel_blank.tft"**_ from the folder _**custom_configuration**_. +2. now upload the TFT file _**"nspanel_blank.tft"**_ to the folder _**"www"**_ in Home Assistant +3. now go to the item _**"Developer tools --> Services"**_ and search there for the services +  +_**"ESPHome: DEVICE_NAME_upload_tft"**_ --> (esphome.device_name_upload_tft) +4. under URL you have to enter the path to your file _**nspanel_blank.tft**_. This could look like this +_**"http://IP_HOME_ASSISTANT:8123/local/nspanel_blank.tft"**_ +5. now the TFT file should be played on the NSPanel. It may take a moment until it is ready +6. If everything worked, you should see only a white page on the NSPanel. +7. now you can continue with the setup and configuration of my version. For this see [Short version of the setup of Esphome and Blueprint](https://github.com/Blackymas/NSPanel_HA_Blueprint/wiki/(EN)-First-Steps---Installation-and-Setup#1-short-version-of-the-setup-of-esphome-and-blueprint) \ No newline at end of file